aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-09-17mwifiex: fix error handling in mwifiex_create_custom_regdomainBob Copeland1-5/+8
smatch reports: sta_cmdresp.c:1053 mwifiex_create_custom_regdomain() warn: possible memory leak of 'regd' Indeed, mwifiex_create_custom_regdomain() returns NULL in the case that channel is missing in the TLV without freeing regd. Moreover, some other error paths in this function return ERR_PTR values which are assigned without checking to the regd field in the mwifiex_adapter struct. The latter is only null-checked where used. Fix by freeing regd in the error path, and only update priv->adapter->regd if the returned pointer is valid. Cc: Amitkumar Karwar <akarwar@marvell.com> Cc: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-17rtl8xxxu: Implement 8192e specific power down sequenceJes Sorensen2-1/+144
This powers down the 8192e correctly, or at least to the point where the firmware will load again, when reloading the driver module. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-17samples/bpf: add comprehensive ipip, ipip6, ip6ip6 testAlexei Starovoitov2-0/+310
the test creates 3 namespaces with veth connected via bridge. First two namespaces simulate two different hosts with the same IPv4 and IPv6 addresses configured on the tunnel interface and they communicate with outside world via standard tunnels. Third namespace creates collect_md tunnel that is driven by BPF program which selects different remote host (either first or second namespace) based on tcp dest port number while tcp dst ip is the same. This scenario is rough approximation of load balancer use case. The tests check both traditional tunnel configuration and collect_md mode. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17samples/bpf: extend test_tunnel_bpf.sh with IPIP testAlexei Starovoitov2-8/+106
extend existing tests for vxlan, geneve, gre to include IPIP tunnel. It tests both traditional tunnel configuration and dynamic via bpf helpers. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17ip6_tunnel: add collect_md mode to IPv6 tunnelsAlexei Starovoitov2-45/+134
Similar to gre, vxlan, geneve tunnels allow IPIP6 and IP6IP6 tunnels to operate in 'collect metadata' mode. Unlike ipv4 code here it's possible to reuse ip6_tnl_xmit() function for both collect_md and traditional tunnels. bpf_skb_[gs]et_tunnel_key() helpers and ovs (in the future) are the users. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17ip_tunnel: add collect_md mode to IPIP tunnelAlexei Starovoitov4-6/+108
Similar to gre, vxlan, geneve tunnels allow IPIP tunnels to operate in 'collect metadata' mode. bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away. ovs can use it as well in the future (once appropriate ovs-vport abstractions and user apis are added). Note that just like in other tunnels we cannot cache the dst, since tunnel_info metadata can be different for every packet. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17l2tp: constify net_device_ops structuresJulia Lawall1-1/+1
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 3401 931 44 4376 1118 net/l2tp/l2tp_eth.o and after the change it is: text data bss dec hex filename 3993 347 44 4384 1120 net/l2tp/l2tp_eth.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17dwc_eth_qos: constify net_device_ops structuresJulia Lawall1-1/+1
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 21623 1316 40 22979 59c3 drivers/net/ethernet/synopsys/dwc_eth_qos.o and after the change it is: text data bss dec hex filename 22199 724 40 22963 59b3 drivers/net/ethernet/synopsys/dwc_eth_qos.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17hisilicon: constify net_device_ops structuresJulia Lawall1-1/+1
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 7995 848 8 8851 2293 drivers/net/ethernet/hisilicon/hip04_eth.o and after the change it is: text data bss dec hex filename 8571 256 8 8835 2283 drivers/net/ethernet/hisilicon/hip04_eth.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17llc: switch type to bool as the timeout is only tested versus 0Alan Cox1-2/+2
(As asked by Dave in Februrary) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17net: l3mdev: Remove netif_index_is_l3_masterDavid Ahern1-24/+0
No longer used after e0d56fdd73422 ("net: l3mdev: remove redundant calls") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17net: vrf: Remove RT_FL_TOSDavid Ahern1-3/+0
No longer used after d66f6c0a8f3c0 ("net: ipv4: Remove l3mdev_get_saddr") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17tcp: prepare skbs for better sack shiftingEric Dumazet1-7/+24
With large BDP TCP flows and lossy networks, it is very important to keep a low number of skbs in the write queue. RACK and SACK processing can perform a linear scan of it. We should avoid putting any payload in skb->head, so that SACK shifting can be done if needed. With this patch, we allow to pack ~0.5 MB per skb instead of the 64KB initially cooked at tcp_sendmsg() time. This gives a reduction of number of skbs in write queue by eight. tcp_rack_detect_loss() likes this. We still allow payload in skb->head for first skb put in the queue, to not impact RPC workloads. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17net/mlx5e: Implement RX mapped page cache for page recycleTariq Toukan4-5/+99
Instead of reallocating and mapping pages for RX data-path, recycle already used pages in a per ring cache. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - order0 no cache * 4,786,899 - order0 with cache 1% gain Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - order0 no cache * 4,127,852 - order0 with cache 3.7% gain Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - order0 no cache * 3,931,708 - order0 with cache 5.4% gain Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17net/mlx5e: Introduce API for RX mapped pagesTariq Toukan1-19/+27
Manage the allocation and deallocation of mapped RX pages only through dedicated API functions. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17net/mlx5e: Single flow order-0 pages for Striding RQTariq Toukan5-304/+184
To improve the memory consumption scheme, we omit the flow that demands and splits high-order pages in Striding RQ, and stay with a single Striding RQ flow that uses order-0 pages. Moving to fragmented memory allows the use of larger MPWQEs, which reduces the number of UMR posts and filler CQEs. Moving to a single flow allows several optimizations that improve performance, especially in production servers where we would anyway fallback to order-0 allocations: - inline functions that were called via function pointers. - improve the UMR post process. This patch alone is expected to give a slight performance reduction. However, the new memory scheme gives the possibility to use a page-cache of a fair size, that doesn't inflate the memory footprint, which will dramatically fix the reduction and even give a performance gain. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - this patch no reduction Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - this patch 3.5% reduction Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - this patch 4% reduction Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Fixes: bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17rxrpc: Make IPv6 support conditional on CONFIG_IPV6David Howells8-2/+34
Add CONFIG_AF_RXRPC_IPV6 and make the IPv6 support code conditional on it. This is then made conditional on CONFIG_IPV6. Without this, the following can be seen: net/built-in.o: In function `rxrpc_init_peer': >> peer_object.c:(.text+0x18c3c8): undefined reference to `ip6_route_output_flags' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net-next: dsa: add new driver for qca8xxx familyJohn Crispin4-0/+1255
This patch contains initial support for the QCA8337 switch. It will detect a QCA8337 switch, if present and declared in the DT. Each port will be represented through a standalone net_device interface, as for other DSA switches. CPU can communicate with any of the ports by setting an IP@ on ethN interface. Most of the extra callbacks of the DSA subsystem are already supported, such as bridge offloading, stp, fdb. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net-next: dsa: add Qualcomm tag RX/TX handlerJohn Crispin6-0/+148
Add support for the 2-bytes Qualcomm tag that gigabit switches such as the QCA8337/N might insert when receiving packets, or that we need to insert while targeting specific switch ports. The tag is inserted directly behind the ethernet header. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>