aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-09docs/btf: fix the missing section marksGary Lin1-0/+2
The section titles of 3.4 and 3.5 are not marked correctly. Signed-off-by: Gary Lin <glin@suse.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-09nfp: bpf: fix static check error through tightening shift amount adjustmentJiong Wang1-1/+12
NFP shift instruction has something special. If shift direction is left then shift amount of 1 to 31 is specified as 32 minus the amount to shift. But no need to do this for indirect shift which has shift amount be 0. Even after we do this subtraction, shift amount 0 will be turned into 32 which will eventually be encoded the same as 0 because only low 5 bits are encoded, but shift amount be 32 will fail the FIELD_PREP check done later on shift mask (0x1f), due to 32 is out of mask range. Such error has been observed when compiling nfp/bpf/jit.c using gcc 8.3 + O3. This issue has started when indirect shift support added after which the incoming shift amount to __emit_shf could be 0, therefore it is at that time shift amount adjustment inside __emit_shf should have been tightened. Fixes: 991f5b3651f6 ("nfp: bpf: support logic indirect shifts (BPF_[L|R]SH | BPF_X)") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Pablo Cascón <pablo.cascon@netronome.com Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-09selftests: bpf: initialize bpf_object pointers where neededLorenz Bauer3-2/+5
There are a few tests which call bpf_object__close on uninitialized bpf_object*, which may segfault. Explicitly zero-initialise these pointers to avoid this. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-09packet: Fix error path in packet_initYueHaibing1-5/+20
kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09net/tcp: use deferred jump label for TCP acked data hookJakub Kicinski3-6/+13
User space can flip the clean_acked_data_enabled static branch on and off with TLS offload when CONFIG_TLS_DEVICE is enabled. jump_label.h suggests we use the delayed version in this case. Deferred branches now also don't take the branch mutex on decrement, so we avoid potential locking issues. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09net: aquantia: fix undefined devm_hwmon_device_register_with_info referenceKefeng Wang1-0/+5
drivers/net/ethernet/aquantia/atlantic/aq_drvinfo.o: In function `aq_drvinfo_init': aq_drvinfo.c:(.text+0xe8): undefined reference to `devm_hwmon_device_register_with_info' Fix it by using #if IS_REACHABLE(CONFIG_HWMON). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09aqc111: fix double endianness swap on BEOliver Neukum1-2/+4
If you are using a function that does a swap in place, you cannot just reuse the buffer on the assumption that it has not been changed. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09aqc111: fix writing to the phy on BEOliver Neukum1-6/+17
When writing to the phy on BE architectures an internal data structure was directly given, leading to it being byte swapped in the wrong way for the CPU in 50% of all cases. A temporary buffer must be used. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09aqc111: fix endianness issue in aqc111_change_mtuOliver Neukum1-0/+2
If the MTU is large enough, the first write to the device is just repeated. On BE architectures, however, the first word of the command will be swapped a second time and garbage will be written. Avoid that. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09vlan: disable SIOCSHWTSTAMP in containerHangbin Liu1-1/+3
With NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on vlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container. Fixes: a6111d3c93d0 ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09macvlan: disable SIOCSHWTSTAMP in containerHangbin Liu1-0/+2
Miroslav pointed that with NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on macvlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container. Fixes: 254c0a2bfedb ("macvlan: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to real device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09tipc: fix hanging clients using poll with EPOLLOUT flagParthasarathy Bhuvaragan1-2/+2
commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") introduced a regression for clients using non-blocking sockets. After the commit, we send EPOLLOUT event to the client even in TIPC_CONNECTING state. This causes the subsequent send() to fail with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state. In this commit, we: - improve the fix for hanging poll() by replacing sk_data_ready() with sk_state_change() to wake up all clients. - revert the faulty updates introduced by commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets"). Fixes: 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09tuntap: synchronize through tfiles array instead of tun->numqueuesJason Wang1-1/+6
When a queue(tfile) is detached through __tun_detach(), we move the last enabled tfile to the position where detached one sit but don't NULL out last position. We expect to synchronize the datapath through tun->numqueues. Unfortunately, this won't work since we're lacking sufficient mechanism to order or synchronize the access to tun->numqueues. To fix this, NULL out the last position during detaching and check RCU protected tfile against NULL instead of checking tun->numqueues in datapath. Cc: YueHaibing <yuehaibing@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: weiyongjun (A) <weiyongjun1@huawei.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: c8d68e6be1c3b ("tuntap: multiqueue support") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09tuntap: fix dividing by zero in ebpf queue selectionJason Wang1-1/+6
We need check if tun->numqueues is zero (e.g for the persist device) before trying to use it for modular arithmetic. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 96f84061620c6("tun: add eBPF based queue selection method") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09dwmac4_prog_mtl_tx_algorithms() missing write operationCheng Han1-0/+2
net: ethernet: stmmac: dwmac4_prog_mtl_tx_algorithms() missing write operation The value of MTL_OPERATION_MODE is not written back Signed-off-by: Cheng Han <hancheng2009@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09ptp_qoriq: fix NULL access if ptp dt node missingClaudiu Manoil1-0/+3
Make sure ptp dt node exists before accessing it in case of NULL pointer call trace. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net/sched: avoid double free on matchall reoffloadPieter Jansen van Vuuren1-0/+1
Avoid freeing cls_mall.rule twice when failing to setup flow_action offload used in the hardware intermediate representation. This is achieved by returning 0 when the setup fails but the skip software flag has not been set. Fixes: f00cbf196814 ("net/sched: use the hardware intermediate representation for matchall") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08nfp: reintroduce ndo_get_port_parent_id for representor portsPieter Jansen van Vuuren2-0/+17
NFP does not register devlink ports for representors (without the "devlink: expose PF and VF representors as ports" series there are no port flavours to expose them as). Commit c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation") went to far in removing ndo_get_port_parent_id for representors. This causes redirection offloads to fail, and switch_id attribute missing. Reintroduce the ndo_get_port_parent_id callback for representor ports. Fixes: c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net: phy: realtek: Change TX-delay setting for RGMII modes onlySerge Semin1-4/+15
It's prone to problems if delay is cleared out for other than RGMII modes. So lets set/clear the TX-delay in the config register only if actually RGMII-like interface mode is requested. This only concerns rtl8211f chips. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net: phy: realtek: Add rtl8211e rx/tx delays configSerge Semin1-0/+51
There are two chip pins named TXDLY and RXDLY which actually adds the 2ns delays to TXC and RXC for TXD/RXD latching. Alas this is the only documented info regarding the RGMII timing control configurations the PHY provides. It turns out the same settings can be setup via MDIO registers hidden in the extension pages layout. Particularly the extension page 0xa4 provides a register 0x1c, which bits 1 and 2 control the described delays. They are used to implement the "rgmii-{id,rxid,txid}" phy-mode. The hidden RGMII configs register utilization was found in the rtl8211e U-boot driver: https://elixir.bootlin.com/u-boot/v2019.01/source/drivers/net/phy/realtek.c#L99 There is also a freebsd-folks discussion regarding this register: https://reviews.freebsd.org/D13591 It confirms that the register bits field must control the so called configuration pins described in the table 12-13 of the official PHY datasheet: 8:6 = PHY Address 5:4 = Auto-Negotiation 3 = Interface Mode Select 2 = RX Delay 1 = TX Delay 0 = SELRGV Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net: dsa: sja1105: Don't return a negative in u8 sja1105_stp_state_getVladimir Oltean1-1/+5
Dan Carpenter says: The patch 640f763f98c2: "net: dsa: sja1105: Add support for Spanning Tree Protocol" from May 5, 2019, leads to the following static checker warning: drivers/net/dsa/sja1105/sja1105_main.c:1073 sja1105_stp_state_get() warn: signedness bug returning '(-22)' The caller doesn't check for negative errors anyway. Fixes: 640f763f98c2: ("net: dsa: sja1105: Add support for Spanning Tree Protocol") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net: dsa: sja1105: fix check on while loop exitColin Ian King1-3/+4
The while-loop exit condition check is not correct; the loop should continue if the returns from the function calls are negative or the CRC status returns are invalid. Currently it is ignoring the returns from the function calls. Fix this by removing the status return checks and only break from the loop at the very end when we know that all the success condtions have been met. Kudos to Dan Carpenter for describing the correct fix and Vladimir Oltean for noting the change to the check on the number of retries. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net: dsa: sja1105: Make 'sja1105et_regs' and 'sja1105pqrs_regs' staticWang Hai1-2/+2
drivers/net/dsa/sja1105/sja1105_spi.c:486:21: warning: symbol 'sja1105et_regs' was not declared. Should it be static? drivers/net/dsa/sja1105/sja1105_spi.c:511:21: warning: symbol 'sja1105pqrs_regs' was not declared. Should it be static? Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai26@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08selinux: do not report error on connect(AF_UNSPEC)Paolo Abeni1-4/+4
calling connect(AF_UNSPEC) on an already connected TCP socket is an established way to disconnect() such socket. After commit 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure") it no longer works and, in the above scenario connect() fails with EAFNOSUPPORT. Fix the above falling back to the generic/old code when the address family is not AF_INET{4,6}, but leave the SCTP code path untouched, as it has specific constraints. Fixes: 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure") Reported-by: Tom Deseyn <tdeseyn@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net: hns3: remove redundant assignment of l2_hdr to itselfColin Ian King1-1/+1
The pointer l2_hdr is being assigned to itself, this is redundant and can be removed. Addresses-Coverity: ("Evaluation order violation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net: dsa: lantiq: fix spelling mistake "brigde" -> "bridge"Colin Ian King1-4/+4
There are several spelling mistakes in dev_err messages. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08openvswitch: Replace removed NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)Geert Uytterhoeven1-2/+2
Commit 4806e975729f99c7 ("netfilter: replace NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)") removed CONFIG_NF_NAT_NEEDED, but a new user popped up afterwards. Fixes: fec9c271b8f1bde1 ("openvswitch: load and reference the NAT helper.") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08ipv4: Fix raw socket lookup for local trafficDavid Ahern1-2/+2
inet_iif should be used for the raw socket lookup. inet_iif considers rt_iif which handles the case of local traffic. As it stands, ping to a local address with the '-I <dev>' option fails ever since ping was changed to use SO_BINDTODEVICE instead of cmsg + IP_PKTINFO. IPv6 works fine. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not suppliedHangbin Liu1-3/+3
With commit 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") we now able to check if a rule already exists. But this only works with iproute2. For other tools like libnl, NetworkManager, it still could add duplicate rules with only NLM_F_CREATE flag, like [localhost ~ ]# ip rule 0: from all lookup local 32766: from all lookup main 32767: from all lookup default 100000: from 192.168.7.5 lookup 5 100000: from 192.168.7.5 lookup 5 As it doesn't make sense to create two duplicate rules, let's just return 0 if the rule exists. Fixes: 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") Reported-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07cxgb4: Fix error path in cxgb4_init_moduleYueHaibing1-3/+12
BUG: unable to handle kernel paging request at ffffffffa016a270 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:atomic_notifier_chain_register+0x24/0x60 Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08 RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086 RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278 RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240 RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260 R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78 FS: 00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0 Call Trace: register_inet6addr_notifier+0x13/0x20 cxgb4_init_module+0x6c/0x1000 [cxgb4 ? 0xffffffffa01d7000 do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe If pci_register_driver fails, register inet6addr_notifier is pointless. This patch fix the error path in cxgb4_init_module. Fixes: b5a02f503caa ("cxgb4 : Update ipv6 address handling api") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: phy: improve pause mode reporting in phy_print_statusHeiner Kallweit1-1/+27
So far we report symmetric pause only, and we don't consider the local pause capabilities. Let's properly consider local and remote capabilities, and report also asymmetric pause. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindingsMaxime Chevallier1-1/+1
The phy_mode "2000base-x" is actually supposed to be "1000base-x", even though the commit title of the original patch says otherwise. Fixes: 55601a880690 ("net: phy: Add 2000base-x, 2500base-x and rxaui modes") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: macb: Change interrupt and napi enable order in openHarini Katakam1-3/+3
Current order in open: -> Enable interrupts (macb_init_hw) -> Enable NAPI -> Start PHY Sequence of RX handling: -> RX interrupt occurs -> Interrupt is cleared and interrupt bits disabled in handler -> NAPI is scheduled -> In NAPI, RX budget is processed and RX interrupts are re-enabled With the above, on QEMU or fixed link setups (where PHY state doesn't matter), there's a chance macb RX interrupt occurs before NAPI is enabled. This will result in NAPI being scheduled before it is enabled. Fix this macb open by changing the order. Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: ll_temac: Improve error message on error IRQEsben Haabendal1-2/+8
The channel status register value can be very helpful when debugging SDMA problems. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net/sched: remove block pointer from common offload structurePieter Jansen van Vuuren8-36/+25
Based on feedback from Jiri avoid carrying a pointer to the tcf_block structure in the tc_cls_common_offload structure. Instead store a flag in driver private data which indicates if offloads apply to a shared block at block binding time. Suggested-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar45-45/+45
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: usb: smsc: fix warning reported by kbuild test robotPetr Štetiar2-2/+2
This patch fixes following warning reported by kbuild test robot: In function ‘memcpy’, inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3, inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2: ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’: ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’ I've replaced the offending memcpy with ether_addr_copy, because I'm 100% sure, that of_get_mac_address can't return NULL as it returns valid pointer or ERR_PTR encoded value, nothing else. I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this would make the warning disappear also, but it would be confusing to check for impossible return value just to make a compiler happy. Fixes: adfb3cb2c52e ("net: usb: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR checkPetr Štetiar1-1/+1
Commit 284eb160681c ("staging: octeon-ethernet: support of_get_mac_address new ERR_PTR error") has introduced checking for ERR_PTR encoded error value from of_get_mac_address with IS_ERR macro, which is not sufficient in this case, as the mac variable is set to NULL initialy and if the kernel is compiled without DT support this NULL would get passed to IS_ERR, which would lead to the wrong decision and would pass that NULL pointer and invalid MAC address further. Fixes: 284eb160681c ("staging: octeon-ethernet: support of_get_mac_address new ERR_PTR error") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-1/+1
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_statsNathan Chancellor1-1/+3
Clang warns: drivers/net/dsa/sja1105/sja1105_ethtool.c:316:39: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct sja1105_port_status status = {0}; ^ {} 1 warning generated. One way to fix these warnings is to add additional braces like Clang suggests; however, there has been a bit of push back from some maintainers[1][2], who just prefer memset as it is unambiguous, doesn't depend on a particular compiler version[3], and properly initializes all subobjects. Do that here so there are no more warnings. [1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/ [2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/ [3]: https://lore.kernel.org/lkml/20181116150432.2408a075@redhat.com/ Fixes: 52c34e6e125c ("net: dsa: sja1105: Add support for ethtool port counters") Link: https://github.com/ClangBuiltLinux/linux/issues/471 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07vrf: sit mtu should not be updated when vrf netdev is the linkStephen Suryaputra1-1/+1
VRF netdev mtu isn't typically set and have an mtu of 65536. When the link of a tunnel is set, the tunnel mtu is changed from 1480 to the link mtu minus tunnel header. In the case of VRF netdev is the link, then the tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in this case. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: Fix error cleanup path in dsa_init_moduleYueHaibing1-2/+9
BUG: unable to handle kernel paging request at ffffffffa01c5430 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:raw_notifier_chain_register+0x16/0x40 Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08 RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282 RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068 RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700 R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78 FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0 Call Trace: register_netdevice_notifier+0x43/0x250 ? 0xffffffffa01e0000 dsa_slave_register_notifier+0x13/0x70 [dsa_core ? 0xffffffffa01e0000 dsa_init_module+0x2e/0x1000 [dsa_core do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cleanup allocated resourses if there are errors, otherwise it will trgger memleak. Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07l2tp: Fix possible NULL pointer dereferenceYueHaibing1-1/+2
BUG: unable to handle kernel NULL pointer dereference at 0000000000000128 PGD 0 P4D 0 Oops: 0000 [#1 CPU: 0 PID: 5697 Comm: modprobe Tainted: G W 5.1.0-rc7+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__lock_acquire+0x53/0x10b0 Code: 8b 1c 25 40 5e 01 00 4c 8b 6d 10 45 85 e4 0f 84 bd 06 00 00 44 8b 1d 7c d2 09 02 49 89 fe 41 89 d2 45 85 db 0f 84 47 02 00 00 <48> 81 3f a0 05 70 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f 86 3a RSP: 0018:ffffc90001c07a28 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88822f038440 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000128 RBP: ffffc90001c07a88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000000 R14: 0000000000000128 R15: 0000000000000000 FS: 00007fead0811540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000128 CR3: 00000002310da000 CR4: 00000000000006f0 Call Trace: ? __lock_acquire+0x24e/0x10b0 lock_acquire+0xdf/0x230 ? flush_workqueue+0x71/0x530 flush_workqueue+0x97/0x530 ? flush_workqueue+0x71/0x530 l2tp_exit_net+0x170/0x2b0 [l2tp_core ? l2tp_exit_net+0x93/0x2b0 [l2tp_core ops_exit_list.isra.6+0x36/0x60 unregister_pernet_operations+0xb8/0x110 unregister_pernet_device+0x25/0x40 l2tp_init+0x55/0x1000 [l2tp_core ? 0xffffffffa018d000 do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fead031a839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe8d9acca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000560078398b80 RCX: 00007fead031a839 RDX: 0000000000000000 RSI: 000056007659dc2e RDI: 0000000000000003 RBP: 000056007659dc2e R08: 0000000000000000 R09: 0000560078398b80 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005600783a04a0 R14: 0000000000040000 R15: 0000560078398b80 Modules linked in: l2tp_core(+) e1000 ip_tables ipv6 [last unloaded: l2tp_core CR2: 0000000000000128 ---[ end trace 8322b2b8bf83f8e1 If alloc_workqueue fails in l2tp_init, l2tp_net_ops is unregistered on failure path. Then l2tp_exit_net is called which will flush NULL workqueue, this patch add a NULL check to fix it. Fixes: 67e04c29ec0d ("l2tp: unregister l2tp_net_ops on failure path") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07taprio: add null check on sched_nest to avoid potential null pointer dereferenceColin Ian King1-0/+2
The call to nla_nest_start_noflag can return a null pointer and currently this is not being checked and this can lead to a null pointer dereference when the null pointer sched_nest is passed to function nla_nest_end. Fix this by adding in a null pointer check. Addresses-Coverity: ("Dereference null return value") Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: mvpp2: cls: fix less than zero check on a u32 variableColin Ian King1-2/+4
The signed return from the call to mvpp2_cls_c2_port_flow_index is being assigned to the u32 variable c2.index and then checked for a negative error condition which is always going to be false. Fix this by assigning the return to the int variable index and checking this instead. Addresses-Coverity: ("Unsigned compared against 0") Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net_sched: sch_fq: handle non connected flowsEric Dumazet1-2/+13
FQ packet scheduler assumed that packets could be classified based on their owning socket. This means that if a UDP server uses one UDP socket to send packets to different destinations, packets all land in one FQ flow. This is unfair, since each TCP flow has a unique bucket, meaning that in case of pressure (fully utilised uplink), TCP flows have more share of the bandwidth. If we instead detect unconnected sockets, we can use a stochastic hash based on the 4-tuple hash. This also means a QUIC server using one UDP socket will properly spread the outgoing packets to different buckets, and in-kernel pacing based on EDT model will no longer risk having big rb-tree on one flow. Note that UDP application might provide the skb->hash in an ancillary message at sendmsg() time to avoid the cost of a dissection in fq packet scheduler. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net_sched: sch_fq: do not assume EDT packets are orderedEric Dumazet1-12/+83
TCP stack makes sure packets for a given flow are monotically increasing, but we want to allow UDP packets to use EDT as well, so that QUIC servers can use in-kernel pacing. This patch adds a per-flow rb-tree on which packets might be stored. We still try to use the linear list for the typical cases where packets are queued with monotically increasing skb->tstamp, since queue/dequeue packets on a standard list is O(1). Note that the ability to store packets in arbitrary EDT order will allow us to implement later a per TCP socket mechanism adding delays (with jitter eventually) and reorders, to implement convenient network emulators. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: use devm_kcalloc when allocating desc_cbYunsheng Lin1-4/+4
This patch uses devm_kcalloc instead of kcalloc when allocating ring->desc_cb, because devm_kcalloc not only ensure to free the memory when the dev is deallocted, but also allocate the memory from it's device memory node. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: some cleanup for struct hns3_enet_ringYunsheng Lin2-9/+2
This patch removes some unused field in struct hns3_enet_ring, use ring->dev for ring_to_dev macro, and use dev consistently in hns3_fill_desc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: unify the page reusing for page size 4K and 64KYunsheng Lin1-32/+13
When page size is 64K, RX buffer is currently not reused when the page_offset is moved to last buffer. This patch adds checking to decide whether the buffer page can be reused when last_offset is moved beyond last offset. If the driver is the only user of page when page_offset is moved to beyond last offset, then buffer can be reused and page_offset is set to zero. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.