aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-02-03xhci: Fix list corruption in urb dequeue at host removalMathias Nyman1-1/+3
xhci driver frees data for all devices, both usb2 and and usb3 the first time usb_remove_hcd() is called, including td_list and and xhci_ring structures. When usb_remove_hcd() is called a second time for the second xhci bus it will try to dequeue all pending urbs, and touches td_list which is already freed for that endpoint. Cc: <stable@vger.kernel.org> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03usb: host: xhci-plat: fix NULL pointer in probe for device tree caseGregory CLEMENT1-1/+2
During probe, in the device tree case, the data pointer associated to a compatible is dereferenced. However, not all the compatibles are associated to a private data pointer. The generic-xhci and the xhci-platform don't need them, this patch adds a test on the data pointer before accessing it, avoiding a kernel crash. Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv") Cc: stable@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03usb: xhci-mtk: fix AHB bus hang up caused by roothubs pollingChunfeng Yun1-0/+23
when ip fails to enter sleep mode, register access protection will be disabled, at the same time if all clocks are disabled, access register will hang up AHB bus. the common case causes ip sleep failure is that after all ports enter U3 but before ip enters sleep mode, a port receives a resume signal('K'). this will happens when such as clicks mouse to try to do remote-wakeup to stop system enter suspend. so stop polling root hubs to avoid access xHCI register on bus suspend, and restart it when bus resumes. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TTChunfeng Yun1-3/+13
when a LS or FS device doesn't connect though a HS hub, the @bPkts field of its periodic endpoint context should be set to 1. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platformsLu Baolu1-1/+3
Intel Broxton M was verifed to require XHCI_PME_STUCK_QUIRK quirk as well. Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03usb: xhci: set SSIC port unused only if xhci_suspend succeedsLu Baolu1-1/+6
XHCI_SSIC_PORT_UNUSED quirk was applied to the xHCI host controllers in some Intel SoC chips. With this quirk applied, SSIC port is set to "unused" prior to xhci_suspend(). This may cause problem if host fails to suspend. In this case, the port is set to unused without host further entering D3, and the port will not be usable anymore. Cc: stable@vger.kernel.org Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03usb: xhci: add a quirk bit for ssic port unusedLu Baolu2-34/+46
Two workarounds introduced by commit b8cb91e058cd ("xhci: Workaround for PME stuck issues in Intel xhci") and commit abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI") share a single quirk bit XHCI_PME_STUCK_QUIRK. These two workarounds actually are different and might happen on different hardwares. Need to separate them by adding a quirk bit for the later. Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03usb: xhci: handle both SSIC ports in PME stuck quirkLu Baolu1-19/+29
Commit abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI") adds a workaround for a limitation of PME storm caused by SSIC port in some Intel SoCs. This commit only handled one SSIC port, while there are actually two SSIC ports in the chips. This patch handles both SSIC ports. Without this fix, users still see PME storm. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.Jianqiang Tang1-0/+1
This patch is needed in order to pass one test case defined in the OTG Automated Compliance Test specification. Specification location: http://www.usb.org/developers/onthego/otgeh_compliance_plan_1_2.pdf This test case uses PET Tool, and PET Tool is one USB hardware equipment provided by MQP Electronics. Test case id is 6.8.3 B-UUT Bypass Capacitance. We must set this otg flag in order to be able to return OTG descriptor during enumeration, otherwise this test case with failed with below error: "Get OTG descriptor request stalled". Signed-off-by: Jianqiang Tang <jianqiang.tang@intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-03Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"Mathias Nyman1-10/+0
This reverts commit e210c422b6fd ("xhci: don't finish a TD if we get a short transfer event mid TD") Turns out that most host controllers do not follow the xHCI specs and never send the second event for the last TRB in the TD if there was a short event mid-TD. Returning the URB directly after the first short-transfer event is far better than never returning the URB. (class drivers usually timeout after 30sec). For the hosts that do send the second event we will go back to treating it as misplaced event and print an error message for it. The origial patch was sent to stable kernels and needs to be reverted from there as well Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03MAINTAINERS: fix my email addressFelipe Balbi1-5/+5
As I'm not working for Texas Instruments anymore, balbi@ti.com isn't a valid address. I'll be using balbi@kernel.org at least for the time being. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-03usb: dwc2: Fix probe problem on bcm2835John Youn1-6/+0
Fixes an issue found on Raspberry PI platform that prevents probe. Don't skip setting the force mode if it's already set. Fixes: 09c96980dc72 ("usb: dwc2: Add functions to set and clear force mode") Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Remi Pommarel <repk@triplefau.lt> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-03Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"John Youn2-9/+7
This reverts commit 263b7fb557f7 ("usb: dwc2: Move reset into dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB ethernet fails, due to being unable to pick up proper parameters when performing a plain reset before reading hw params. Below shows the results of the gnptxfsiz and hptxfsiz with and before and after reverting this (from Stefan Wahren): So here is the probe result before Patch 1 is applied: [ 1.283148] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.313894] dwc2 20980000.usb: gnptxfsiz=00201000 [ 1.314104] dwc2 20980000.usb: hptxfsiz=00000000 [ 1.353908] dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration. [ 1.354262] dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration. [ 1.394249] dwc2 20980000.usb: DWC OTG Controller [ 1.394561] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.394917] dwc2 20980000.usb: irq 33, io mem 0x00000000 And here is the probe result after Patch 1 is applied: [ 1.280107] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.353949] dwc2 20980000.usb: gnptxfsiz=01001000 [ 1.354166] dwc2 20980000.usb: hptxfsiz=02002000 [ 1.434301] dwc2 20980000.usb: DWC OTG Controller [ 1.434616] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.434973] dwc2 20980000.usb: irq 33, io mem 0x00000000 Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Remi Pommarel <repk@triplefau.lt> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-03usb: musb: ux500: Fix NULL pointer dereference at system PMUlf Hansson1-2/+5
The commit 7d32cdef5356 ("usb: musb: fail with error when no DMA controller set"), caused the core platform driver to correctly return an error code when fail probing. Unfurtante it also caused bug for a NULL pointer dereference, during system suspend for the ux500 driver. The reason is a lacking validation of the corresponding ->driver_data pointer, which won't be set when the musb core driver fails to probe (or haven't yet been probed). Fixes: 7d32cdef5356 ("usb: musb: fail with error when no DMA...") Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-03usb: phy: mxs: declare variable with initialized valueLi Jun1-1/+1
Initialize vbus_value to be 0 since it's possible not to assign any value before judgement. Acked-by: Peter Chen <peter.chen@nxp.com Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-03usb: phy: msm: fix error handling in probe.Srinivas Kandagatla1-13/+24
This driver registers for extcon events as part of its probe, but never unregisters them in case of error in the probe path. There were multiple issues noticed due to this missing error handling. One of them is random crashes if the regulators are not ready yet by the time probe is invoked. Ivan's previous attempt [1] to fix this issue, did not really address all the failure cases like regualtor/get_irq failures. [1] https://lkml.org/lkml/2015/9/7/62 Without this patch the kernel would carsh with log: ... Unable to handle kernel paging request at virtual address 17d78410 pgd = ffffffc001a5c000 [17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: deferwq deferred_probe_work_func task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000 PC is at raw_notifier_chain_register+0x1c/0x44 LR is at extcon_register_notifier+0x88/0xc8 pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085 sp : ffffffc0368b3a70 x29: ffffffc0368b3a70 x28: ffffffc03680c310 x27: ffffffc035518000 x26: ffffffc035518000 x25: ffffffc03bfa20e0 x24: ffffffc035580a18 x23: 0000000000000000 x22: ffffffc035518458 x21: ffffffc0355e9a60 x20: ffffffc035518000 x19: 0000000000000000 x18: 0000000000000028 x17: 0000000000000003 x16: ffffffc0018153c8 x15: 0000000000000001 x14: ffffffc03686f0f8 x13: ffffffc03686f0f8 x12: 0000000000000003 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1 x7 : 0000000000000028 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 00000000354fb170 x2 : 0000000017d78400 x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268 Fixes: 591fc116f330 ("usb: phy: msm: Use extcon framework for VBUS and ID detection") CC: Stable <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-01-31Linux 4.5-rc2Linus Torvalds1-1/+1
2016-01-30pid: Fix spelling in commentsZhen Lei1-1/+1
Accidentally discovered this typo when I studied this module. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tianhong Ding <dingtianhong@huawei.com> Cc: Xinwei Hu <huxinwei@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1454119457-11272-1-git-send-email-thunder.leizhen@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29Revert "btrfs: synchronize incompat feature bits with sysfs files"Chris Mason4-17/+0
This reverts commit 14e46e04958df740c6c6a94849f176159a333f13. This ends up doing sysfs operations from deep in balance (where we should be GFP_NOFS) and under heavy balance load, we're making races against sysfs internals. Revert it for now while we figure things out. Signed-off-by: Chris Mason <clm@fb.com>
2016-01-29serial: 8250_pci: Add Intel Broadwell portsMika Westerberg1-0/+29
Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as used on Intel Baytrail so we can reuse the existing Baytrail setup code. Add both Broadwell LPSS UART ports to the list of supported devices. Signed-off-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-29x86/mm/pat: Avoid truncation when converting cpa->numpages to addressMatt Fleming1-2/+2
There are a couple of nasty truncation bugs lurking in the pageattr code that can be triggered when mapping EFI regions, e.g. when we pass a cpa->pgd pointer. Because cpa->numpages is a 32-bit value, shifting left by PAGE_SHIFT will truncate the resultant address to 32-bits. Viorel-Cătălin managed to trigger this bug on his Dell machine that provides a ~5GB EFI region which requires 1236992 pages to be mapped. When calling populate_pud() the end of the region gets calculated incorrectly in the following buggy expression, end = start + (cpa->numpages << PAGE_SHIFT); And only 188416 pages are mapped. Next, populate_pud() gets invoked for a second time because of the loop in __change_page_attr_set_clr(), only this time no pages get mapped because shifting the remaining number of pages (1048576) by PAGE_SHIFT is zero. At which point the loop in __change_page_attr_set_clr() spins forever because we fail to map progress. Hitting this bug depends very much on the virtual address we pick to map the large region at and how many pages we map on the initial run through the loop. This explains why this issue was only recently hit with the introduction of commit a5caa209ba9c ("x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down") It's interesting to note that safe uses of cpa->numpages do exist in the pageattr code. If instead of shifting ->numpages we multiply by PAGE_SIZE, no truncation occurs because PAGE_SIZE is a UL value, and so the result is unsigned long. To avoid surprises when users try to convert very large cpa->numpages values to addresses, change the data type from 'int' to 'unsigned long', thereby making it suitable for shifting by PAGE_SHIFT without any type casting. The alternative would be to make liberal use of casting, but that is far more likely to cause problems in the future when someone adds more code and fails to cast properly; this bug was difficult enough to track down in the first place. Reported-and-tested-by: Viorel-Cătălin Răpițeanu <rapiteanu.catalin@gmail.com> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=110131 Link: http://lkml.kernel.org/r/1454067370-10374-1-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-29ALSA: hda - disable dynamic clock gating on Broxton before resetLibin Yang1-0/+13
On Broxton, to make sure the reset controller works properly, MISCBDCGE bit (bit 6) in CGCTL (0x48) of PCI configuration space need be cleared before reset and set back to 1 after reset. Otherwise, it may prevent the CORB/RIRB logic from being reset. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-29iommu: Update struct iommu_ops commentsMagnus Damm1-4/+12
Update the comments around struct iommu_ops to match current state and fix a few typos while at it. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29iommu/vt-d: Fix link to Intel IOMMU SpecificationMichael S. Tsirkin1-1/+1
Looks like the VT-d spec at intel.com got moved. Update the link. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29iommu/amd: Correct the wrong setting of alias DTE in do_attachBaoquan He1-1/+1
In below commit alias DTE is set when its peripheral is setting DTE. However there's a code bug here to wrongly set the alias DTE, correct it in this patch. commit e25bfb56ea7f046b71414e02f80f620deb5c6362 Author: Joerg Roedel <jroedel@suse.de> Date: Tue Oct 20 17:33:38 2015 +0200 iommu/amd: Set alias DTE in do_attach/do_detach Signed-off-by: Baoquan He <bhe@redhat.com> Tested-by: Mark Hounschell <markh@compro.net> Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29iommu/vt-d: Don't skip PCI devices when disabling IOTLBJeremy McNicoll1-1/+1
Fix a simple typo when disabling IOTLB on PCI(e) devices. Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS") Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Jeremy McNicoll <jmcnicol@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29irqchip/mxs: Add missing set_handle_irq()Oleksij Rempel1-0/+1
The rework of the driver missed to move the call to set_handle_irq() into asm9260_of_init(). As a consequence no interrupt entry point is installed and no interrupts are delivered Solution is simple: Install the interrupt entry handler. Fixes: 7e4ac676ee ("irqchip/mxs: Add Alphascale ASM9260 support") Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: kernel@pengutronix.de Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1454061473-24957-1-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-29iommu/io-pgtable-arm: Fix io-pgtable-arm build failureLada Trimasova1-0/+1
Trying to build a kernel for ARC with both options CONFIG_COMPILE_TEST and CONFIG_IOMMU_IO_PGTABLE_LPAE enabled (e.g. as a result of "make allyesconfig") results in the following build failure: | CC drivers/iommu/io-pgtable-arm.o | linux/drivers/iommu/io-pgtable-arm.c: In | function ‘__arm_lpae_alloc_pages’: | linux/drivers/iommu/io-pgtable-arm.c:221:3: | error: implicit declaration of function ‘dma_map_single’ | [-Werror=implicit-function-declaration] | dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE); | ^ | linux/drivers/iommu/io-pgtable-arm.c:221:42: | error: ‘DMA_TO_DEVICE’ undeclared (first use in this function) | dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE); | ^ Since IOMMU_IO_PGTABLE_LPAE depends on DMA API, io-pgtable-arm.c should include linux/dma-mapping.h. This fixes the reported failure. Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Lada Trimasova <ltrimas@synopsys.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29i2c: piix4: don't regress on bus namesJean Delvare1-5/+8
The I2C bus names are supposed to be stable as they can be used by userspace to uniquely identify a specific I2C bus. So restore the original names for all legacy (pre-SB800) devices. For SB800 devices and later, improve the names. "SDA" refers to the serial data pin of each SMBus port, it's an implementation detail the user doesn't need to know. Use "port" instead, which is easier to understand. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Christian Fetzer <fetzer.ch@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-29perf: Remove/simplify lockdep annotationPeter Zijlstra1-21/+1
Now that the perf_event_ctx_lock_nested() call has moved from put_event() into perf_event_release_kernel() the first reason is no longer valid as that can no longer happen. The second reason seems to have been invalidated when Al Viro made fput() unconditionally async in the following commit: 4a9d4b024a31 ("switch fput to task_work_add") such that munmap()->fput()->release()->perf_release() would no longer happen. Therefore, remove the annotation. This should increase the efficiency of lockdep coverage of perf locking. Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Synchronously clean up child eventsPeter Zijlstra2-93/+84
The orphan cleanup workqueue doesn't always catch orphans, for example, if they never schedule after they are orphaned. IOW, the event leak is still very real. It also wouldn't work for kernel counters. Doing it synchonously is a little hairy due to lock inversion issues, but is made to work. Patch based on work by Alexander Shishkin. Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Untangle 'owner' confusionPeter Zijlstra1-2/+12
There are two concepts of owner wrt an event and they are conflated: - event::owner / event::owner_list, used by prctl(.option = PR_TASK_PERF_EVENTS_{EN,DIS}ABLE). - the 'owner' of the event object, typically the file descriptor. Currently these two concepts are conflated, which gives trouble with scm_rights passing of file descriptors. Passing the event and then closing the creating task would render the event 'orphan' and would have it cleared out. Unlikely what is expectd. This patch untangles these two concepts by using PERF_EVENT_STATE_EXIT to denote the second type. Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Add flags argument to perf_remove_from_context()Peter Zijlstra1-11/+12
In preparation to adding more options, convert the boolean argument into a flags word. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Clean up sync_child_event()Peter Zijlstra1-42/+39
sync_child_event() has outgrown its purpose, it does far too much. Bring it back to its named purpose. Rename __perf_event_exit_task() to perf_event_exit_event() to better reflect what it does and move the event->state assignment under the ctx->lock, like state changes ought to be. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Robustify event->owner usage and SMP orderingPeter Zijlstra1-10/+10
Use smp_store_release() to clear event->owner and lockless_dereference() to observe it. Further use READ_ONCE() for all lockless reads. This changes perf_remove_from_owner() to leave event->owner cleared. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Fix STATE_EXIT usagePeter Zijlstra1-2/+4
We should never attempt to enable a STATE_EXIT event. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Update locking orderPeter Zijlstra1-1/+1
Update the locking order to note that ctx::lock nests inside of child_mutex, as per: perf_ioctl(): ctx::mutex -> perf_event_for_each(): event::child_mutex -> _perf_event_enable(): ctx::lock Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Remove __free_event()Peter Zijlstra1-25/+20
There is but a single caller, remove the function - we already have _free_event(), the extra indirection is nonsensical.. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf/bpf: Convert perf_event_array to use struct fileAlexei Starovoitov4-27/+33
Robustify refcounting. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160126045947.GA40151@ast-mbp.thefacebook.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Fix NULL derefPeter Zijlstra1-2/+2
Dan reported: 1229 if (ctx->task == TASK_TOMBSTONE || 1230 !atomic_inc_not_zero(&ctx->refcount)) { 1231 raw_spin_unlock(&ctx->lock); 1232 ctx = NULL; ^^^^^^^^^^ ctx is NULL. 1233 } 1234 1235 WARN_ON_ONCE(ctx->task != task); ^^^^^^^^^^^^^^^^^ The patch adds a NULL dereference. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 63b6da39bb38 ("perf: Fix perf_event_exit_task() race") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf/x86: De-obfuscate codePeter Zijlstra1-3/+1
Get rid of the 'onln' obfuscation. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf/x86: Fix uninitialized value usagePeter Zijlstra1-1/+2
When calling intel_alt_er() with .idx != EXTRA_REG_RSP_* we will not initialize alt_idx and then use this uninitialized value to index an array. When that is not fatal, it can result in an infinite loop in its caller __intel_shared_reg_get_constraints(), with IRQs disabled. Alternative error modes are random memory corruption due to the cpuc->shared_regs->regs[] array overrun, which manifest in either get_constraints or put_constraints doing weird stuff. Only took 6 hours of painful debugging to find this. Neither GCC nor Smatch warnings flagged this bug. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: ae3f011fc251 ("perf/x86/intel: Fix SLM MSR_OFFCORE_RSP1 valid_mask") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-28Staging: speakup: fix read scrolled-back VTSamuel Thibault2-8/+14
Previously, speakup would always read the non-scrolled part of the VT, even when the VT is scrolled back with shift-page. This patch makes vt.c export screen_pos so that speakup can use it to properly access the content of the scrolled-back VT. This was tested with both vgacon and fbcon. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28Staging: speakup: Fix getting port informationSamuel Thibault1-1/+12
Commit f79b0d9c223c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>") broke the port information in the speakup driver: SERIAL_PORT_DFNS only gets defined if asm/serial.h is included, and no other header includes asm/serial.h. We here make sure serialio.c does get the arch-specific definition of SERIAL_PORT_DFNS from asm/serial.h, if any. Along the way, this makes sure that we do have information for the requested serial port number (index) Fixes: f79b0d9c223c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>") Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: stable <stable@vger.kernel.org> # 3.18 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-29ALSA: hda - Add new GPU codec ID 0x10de0083 to snd-hdaAaron Plattner1-0/+1
Vendor ID 0x10de0083 is used by a yet-to-be-named GPU chip. This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is appropriate here. Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-28Revert "Staging: panel: usleep_range is preferred over udelay"Sudip Mukherjee1-19/+15
This reverts commit ebd43516d3879f882a403836bba8bc5791f26a28. We should not be sleeping inside spin_lock. Fixes: ebd43516d387 ("Staging: panel: usleep_range is preferred over udelay") Cc: Sirnam Swetha <theonly.ultimate@gmail.com> Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Reported-by: Huang, Ying <ying.huang@intel.com> Tested-by: Huang, Ying <ying.huang@intel.com> Cc: stable <stable@vger.kernel.org> # 4.4 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-29drm/vmwgfx: respect 'nomodeset'Rob Clark1-0/+7
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-01-28perf: Fix race in perf_event_exit_task_context()Peter Zijlstra1-21/+29
There is a race between perf_event_exit_task_context() and orphans_remove_work() which results in a use-after-free. We mark ctx->task with TASK_TOMBSTONE to indicate a context is 'dead', under ctx->lock. After which point event_function_call() on any event of that context will NOP A concurrent orphans_remove_work() will only hold ctx->mutex for the list iteration and not serialize against this. Therefore its possible that orphans_remove_work()'s perf_remove_from_context() call will fail, but we'll continue to free the event, with the result of free'd memory still being on lists and everything. Once perf_event_exit_task_context() gets around to acquiring ctx->mutex it too will iterate the event list, encounter the already free'd event and proceed to free it _again_. This fails with the WARN in free_event(). Plug the race by having perf_event_exit_task_context() hold ctx::mutex over the whole tear-down, thereby 'naturally' serializing against all other sites, including the orphan work. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: alexander.shishkin@linux.intel.com Cc: dsahern@gmail.com Cc: namhyung@kernel.org Link: http://lkml.kernel.org/r/20160125130954.GY6357@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-28perf: Fix orphan holePeter Zijlstra1-2/+2
We should set event->owner before we install the event, otherwise there is a hole where the target task can fork() and we'll not inherit the event because it thinks the event is orphaned. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-28drm/amdgpu: only move pt bos in LRU list on successNicolai Hähnle1-2/+2
This fixes a race condition in the error case: since the pt bos have not necessarily been reserved in case of an error, we could move a pt bo that is currently in the middle of being evicted/moved by another process, which then resulted in a BUG_ON in ttm_bo_add_to_lru. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.