aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-01-07regulator: mcp16502: document lpm as optionalClaudiu Beznea1-1/+2
Document LPM pin as optional. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1610028927-9842-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-07MAINTAINERS: add myself as maintainer for mcp16502Claudiu Beznea1-2/+2
Andrei is no longer with Microchip. Add myself as maintainer for MCP16502. Along with this change the status from maintained to supported. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1610028927-9842-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-07regulator: mcp16502: lpm pin can be optional on some platformsClaudiu Beznea1-1/+1
On some platform (e.g. SAMA7G5) LPM pin should be optional as it can be controlled explicitly (via shutdown controller registers) in the platform specific power saving code to decrease the power consumption while suspended as this SoC pin may be connected to other devices that could take power saving actions based on its value. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1610028927-9842-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-05regulator: ROHM bd7xxxx: Do not depend on parent driver dataMatti Vaittinen2-17/+7
The ROHM PMIC regulator drivers only need the regmap pointer from the parent device. Regmap can be obtained via dev_get_regmap() so do not require parent to populate driver data for that. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210105130221.GA3438042@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-05regulator: Regulator driver for the Mediatek DVFSRChenryc.chen3-0/+226
Driver for regulators exposed by the DVFSRC (dynamic voltage and frequency scaling resource collector) found in devices based on mt8183 and newer platforms. Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Link: https://lore.kernel.org/r/1608790134-27425-12-git-send-email-henryc.chen@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04regulator: core.c: Replace references to non-existent functionDaniel Scally1-3/+3
The function regulator_set_device_supply() is referenced a few times in comments in regulator/core.c; however this function was removed a long time ago by commit a5766f11cfd3 ("regulator: core - Rework machine API to remove string based functions."). Update those references to point to set_consumer_device_supply(), which replaced the old function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20210103165541.784360-1-djrscally@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04regulator: qcom-rpmh: add QCOM_COMMAND_DB dependencyArnd Bergmann1-0/+1
A built-in regulator driver cannot link against a modular cmd_db driver: qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr' There is already a dependency for RPMh, so add another one of this type for cmd_db. Fixes: 34c5aa2666db ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error") Fixes: 46fc033eba42 ("regulator: add QCOM RPMh regulator driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04arm64: dts: qcom: qrb5165-rb5: fix pm8009 regulatorsDmitry Baryshkov1-1/+8
Fix pm8009 compatibility string to reference pm8009 revision specific to sm8250 platform. Also add S2 regulator to be used for qca639x. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: b1d2674e6121 ("arm64: dts: qcom: Add basic devicetree support for QRB5165 RB5") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-5-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04regulator: qcom-rpmh-regulator: add pm8009-1 chip revisionDmitry Baryshkov1-0/+26
PM8009 has special revision (P=1), which is to be used for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Declare regulators data to be used for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-4-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04regulator: qcom-rpmh-regulator: correct hfsmps515 definitionDmitry Baryshkov1-1/+1
According to the datasheet pm8009's HFS515 regulators have 16mV resolution rather than declared 1.6 mV. Correct the resolution. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revisionDmitry Baryshkov1-0/+1
PMIC pm8009 has special revision (P=1) made for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Add special compatibility string for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-2-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-30regulator: Add regulator driver for ATC260x PMICsCristian Ciocaltea3-0/+548
Add support for the DC-DC converters and LDO regulators found in the ATC2603C and ATC2609A chip variants of the Actions Semi ATC260x family of PMICs. Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/1117b1a01b3948446cb3cc407e52de3a5d4212b0.1609258905.git.cristian.ciocaltea@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-28regulator: rt4831: Adds support for Richtek RT4831 DSV regulatorChiYuan Huang3-0/+209
Adds support for Richtek RT4831 DSV Regulator Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1608217244-314-6-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>