aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-01-26ARM: at91: remove unused mach/system_rev.hAlexandre Belloni1-27/+0
mach/system_rev.h is not used, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: stop using HAVE_AT91_DBGUxAlexandre Belloni2-22/+3
In order to remove SOC_SAM9xxx options, stop using HAVE_AT91_DBGUx. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: fix ordering of SRAM and PM initializationNicolas Ferre3-9/+9
The PM initialization needs internal SRAM for allocating a gen_pool and use it to store its PM code. So we need to have of_platform_populate() before this code. Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: sam9: set arm_pm_idle from sam9_dt_device_initAlexandre Belloni8-40/+7
As all sam9 SoCs are setting arm_pm_idle to at91sam9_idle(), do it from sam9_dt_device_init(). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: adapt patch to newer series] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: fix sam9n12 and sam9x5 arm_pm_idleAlexandre Belloni2-0/+11
sam9n12 and sam9x5 don't set arm_pm_idle because of an oversight, fix that. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: mark const init data with __initconst instead of __initdataAlexandre Belloni2-2/+2
As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: update the paths after having re-arranged the patches] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: fix PM initialization for newer SoCsNicolas Ferre4-1/+30
Newer SoCs: at91sam9x5, at91sam9n12, sama5d3 and sama5d4 embed a DDR controller and have a different PMC status register layout than the at91sam9g45. Create another at91_sam9x5_pm_init() function to match this compatibility. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: fix Kconfig.debug by adding DEBUG_AT91_UART optionNicolas Ferre1-2/+8
The DEBUG_AT91_UART Kconfig option was forgotten when moving the AT91 debug-macro.S file. Add it and use it for the at91.S compilation. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: move at91rm9200_idle() to clk/at91/pmc.cAlexandre Belloni3-9/+10
Move at91rm9200_idle() along with at91sam9_idle() in clk/at91/pmc.c. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: remove unused at91_init_sramAlexandre Belloni2-22/+0
SRAM initialization is now done through the mmio-sram driver and at91_init_sram() is not called anymore, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: sama5d4: remove useless call to at91_init_sramAlexandre Belloni1-1/+0
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: remove useless map_ioAlexandre Belloni9-92/+0
Now that the SRAM is initialized by the mmio-sram driver, .map_io is useless. remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: pm: prepare for multiplatformAlexandre Belloni5-21/+78
Split at91_pm_init() in three variants that are called by the respective SoCs .init_machine. This allows to remove the of_machine_is_compatible() calls and move at91_pm_init() out of arch_initcall() which is required for multiplatform. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: pm: add UDP and UHP checks to newer SoCsAlexandre Belloni1-7/+2
Check UDP and UHP on sam9x5, sam9n12 and the sama5 series. Check UHP on the sam9g45. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: pm: use the mmio-sram pool to access SRAMAlexandre Belloni2-1/+46
Now that the SRAM is part of a genpool, use it to allocate memory to use for the slowclock implementation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: pm: rework cpu detectionAlexandre Belloni1-21/+33
Store SoC differences in a struct to remove cpu_is_* usage. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: add ov2640 camera sensor supportJosh Wu2-2/+35
According to v4l2 dt document, we add: a camera host: ISI port. a i2c camera sensor: ov2640 port. to sama5d3xmb.dtsi. The ov2640 node defines the pinctrls, clocks and refer to isi port. The ISI node also has a reference to the ov2640 port. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCKJosh Wu1-2/+2
For sama5d3xmb board, the pins: pinctrl_isi_pck_as_mck is pck1, and used to provide MCK for camera sensor. We change its name to: pinctrl_pck1_as_isi_mck. As we want camera sensor instead of ISI to configure the pck1 (ISI_MCK) pin. So we remove this pinctrl from ISI DT node. It will be added in sensor's DT node. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}Josh Wu1-3/+3
For sama5d3xmb board, the pins: pinctrl_isi_{power,reset} is used to power-down or reset camera sensor. So we should let camera sensor instead of ISI to configure the pins. This patch will change pinctrl name from pinctrl_isi_{power,reset} to pinctrl_sensor_{power,reset}. And remove these two pinctrl from ISI's DT node. We will add these two pinctrl to sensor's DT node. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: move the isi mck pin to mbBo Shen2-5/+5
The mck is decided by the board design, move it to mb related dtsi file. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: add missing pins of isiBo Shen1-0/+6
The ISI has 12 data lines, add the missing two data lines. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: split isi pinctrlBo Shen2-4/+9
As the ISI has 12 data lines, however we only use 8 data lines with sensor module. So, split the data line into two groups which make it can be choosed depends on the hardware design. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: dts: sama5d3: add isi clockJosh Wu1-0/+2
Add ISI peripheral clock in sama5d3.dtsi. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: ethernut5: use at91sam9xe.dtsiAlexandre Belloni1-1/+1
The ethernut5 is actually based on an at91sam9xe, use the correct dts include. Cc: Martin Reimann <martin.reimann@egnite.de> Cc: Tim Schendekehl <tim.schendekehl@egnite.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: Add a dtsi for at91sam9xeAlexandre Belloni2-0/+61
at91sam9xe is slightly different from at91sam9260, in particular it has a different SRAM size and location. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: add SRAM nodesAlexandre Belloni11-2/+64
Add nodes for the SRAM available on atmel SoCs For the at91sam9260 and the at91sam9g20, address mirroring is used to create a single contiguous SRAM range instead of declaring two separate banks. Also remove leftover TODOs in the sam9g45 file Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: correct at91sam9rl sram size => 0x10000] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: at91rm9200ek: enable RTCAlexandre Belloni1-0/+4
Enable the RTC on the at91rm9200ek. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: rm9200: add RTC nodeAlexandre Belloni1-0/+7
Add a node for the RTC available on at91rm9200. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: at91sam9n12: Add RTC nodeAlexandre Belloni1-0/+7
Add node for the RTC available on the at91sam9n12. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless at91rm9200_set_type()Alexandre Belloni2-12/+0
Since all rm9200 board files have been removed, there is no user of at91rm9200_set_type() left. Remove it Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless at91rm9200_dt_initialize()Alexandre Belloni3-9/+1
at91rm9200_dt_initialize() is doing the same as at91_dt_initialize(), use that one instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: move debug-macro.S into the common spaceAlexandre Belloni3-10/+19
Move debug-macro.S from include/mach/ to include/debug where all other common debug macros are. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless at91_sysirq_mask_rtxAlexandre Belloni12-150/+1
The irq fixup from at91_sysirq_mask_rtc and at91_sysirq_mask_rtt is now handled by aic_common_rtc_irq_fixup and aic_common_rtt_irq_fixup. Remove those useless functions. Also remove the now unused mach/at91_rtt.h header. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless config MACH_AT91SAM9_DTAlexandre Belloni2-6/+1
Now that at91sam9 SoCs are only supported through DT, remove CONFIG_MACH_AT91SAM9_DT and use CONFIG_SOC_AT91SAM9 instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless config MACH_AT91RM9200_DTAlexandre Belloni2-4/+1
Now that rm9200 is only supported through DT, remove CONFIG_MACH_AT91RM9200_DT and use CONFIG_SOC_AT91RM9200 instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove unused mach/memory.hAlexandre Belloni1-26/+0
CONFIG_NEED_MACH_MEMORY_H is not set by any at91 platform, remove mach/memory.h Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless header file includesBoris Brezillon2-2/+0
Since removal of !DT boards, asm/irq.h inclusion is not needed in these product files. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove unneeded header fileNicolas Ferre1-80/+0
These GPIO pin descriptions are now moved with the pinctrl driver. We can safely remove this useless header file. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15rtc: at91/Kconfig: remove useless optionsNicolas Ferre1-28/+0
As we removed all the !DT boards during 3.19 cycle, we can now remove these options. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>