aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-13mmc: sdhci-pci: Make function amd_sdhci_reset staticzhengbin1-1/+1
Fix sparse warnings: drivers/mmc/host/sdhci-pci-core.c:1599:6: warning: symbol 'amd_sdhci_reset' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci-of-arasan: Add Support for Intel LGM SDXCRamuthevar Vadivel Murugan1-0/+15
The current arasan sdhci PHY configuration isn't compatible with the PHY on Intel's LGM(Lightning Mountain) SoC devices. Therefore, add a new compatible, to adapt the Intel's LGM SDXC PHY with arasan-sdhc controller to configure the PHY. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13dt-bindings: mmc: sdhci-of-arasan: Add new compatible for Intel LGM SDXCRamuthevar Vadivel Murugan1-0/+17
Add a new compatible to use the sdhc-arasan host controller driver with the SDXC PHY to support on Intel's Lightning Mountain(LGM) SoC. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: sdmmc: add busy_complete callbackLudovic Barre3-0/+47
This patch adds a specific busy_complete callback for sdmmc variant. sdmmc has 2 status flags: -busyd0: This is a hardware status flag (inverted value of d0 line). it does not generate an interrupt. -busyd0end: This indicates only end of busy following a CMD response. On busy to Not busy changes, an interrupt is generated (if unmask) and BUSYD0END status flag is set. Status flag is cleared by writing corresponding interrupt clear bit in MMCICLEAR. The legacy busy completion has no dedicated interrupt for the end of busy, so it's must monitor step by step the busy progression. On sdmmc variant, this procedure is not needed, it's just need to wait the busyd0end interrupt. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: add busy_complete callbackLudovic Barre2-62/+73
This patch adds busy_completion callback at mmci_host_ops to allow to define a specific busy completion by variant. The legacy code corresponding to busy completion used by ux500 variants is moved to ux500_busy_complete function. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: add hardware busy timeout featureLudovic Barre2-5/+40
In the stm32_sdmmc variant, the datatimer is active not only during data transfers with the DPSM, but also while waiting for the busyend IRQs from commands having the MMC_RSP_BUSY flag set. This leads to an incorrect IRQ being raised to signal MCI_DATATIMEOUT error, which simply breaks the behaviour. Address this by updating the datatimer value before sending a command having the MMC_RSP_BUSY flag set. To inform the mmc core about the maximum supported busy timeout, which also depends on the current clock rate, set ->max_busy_timeout (in ms). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: make unexported functions staticBen Dooks1-10/+10
Fix the following sparse warnings by making any functions not used outsde the mmci.c driver static. drivers/mmc/host/mmci.c:422:6: warning: symbol 'mmci_dma_release' was not declared. Should it be static? drivers/mmc/host/mmci.c:430:6: warning: symbol 'mmci_dma_setup' was not declared. Should it be static? drivers/mmc/host/mmci.c:465:5: warning: symbol 'mmci_prep_data' was not declared. Should it be static? drivers/mmc/host/mmci.c:481:6: warning: symbol 'mmci_unprep_data' was not declared. Should it be static? drivers/mmc/host/mmci.c:490:6: warning: symbol 'mmci_get_next_data' was not declared. Should it be static? drivers/mmc/host/mmci.c:498:5: warning: symbol 'mmci_dma_start' was not declared. Should it be static? drivers/mmc/host/mmci.c:533:6: warning: symbol 'mmci_dma_finalize' was not declared. Should it be static? drivers/mmc/host/mmci.c:542:6: warning: symbol 'mmci_dma_error' was not declared. Should it be static? drivers/mmc/host/mmci.c:951:6: warning: symbol 'mmci_variant_init' was not declared. Should it be static? drivers/mmc/host/mmci.c:956:6: warning: symbol 'ux500v2_variant_init' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: dw_mmc: fix indentation issueColin Ian King1-2/+2
There are a couple of statements that are indented by an extra space, clean this up by remove the extraneous spaces. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13memstick: jmb38x_ms: clean up indentation issueColin Ian King1-6/+6
There is a hunk of code that is indented one level too deep, fix this by removing the extraneous tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13dt-bindings: mmc: renesas_sdhi: Add r8a774b1 supportBiju Das1-0/+1
Document RZ/G2N (R8A774B1) SoC bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: cavium-octeon: Use devm_platform_ioremap_resource()Markus Elfring1-13/+2
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: bcm2835: Use devm_platform_ioremap_resource wrapperSaiyam Doshi1-3/+1
Use devm_platform_ioremap_resource helper which wraps platform_get_resource() and devm_ioremap_resource() together. Generated by: scripts/coccinelle/api/devm_platform_ioremap_resource.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: tmio: remove workaround for NON_REMOVABLEWolfram Sang1-9/+0
PM has been reworked, so eMMC gets now detected on R-Car H3 ES1.0 and 2.0 as well as M3-N without the workaround. Card detect and write protect also still work. Remove the workaround. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13MAINTAINERS: Add entry for Actions Semi SD/MMC driver and bindingManivannan Sadhasivam1-0/+2
Add MAINTAINERS entry for Actions Semi SD/MMC driver with its binding. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: Add Actions Semi Owl SoCs SD/MMC driverManivannan Sadhasivam3-0/+705
Add SD/MMC driver for Actions Semi Owl SoCs. This driver currently supports standard, high speed, SDR12, SDR25 and SDR50. DDR50 mode is supported but it is untested. There is no SDIO support for now. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>