aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-20thermal: tegra: add get_trend opsWei Ni1-0/+32
Add support for get_trend ops that allows soctherm sensors to be used with the step-wise governor. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: fix memory allocationWei Ni1-1/+1
Fix memory allocation to store the pointers to thermal_zone_device. Signed-off-by: Wei Ni <wni@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: remove unnecessary warningsWei Ni1-2/+2
Convert warnings to info as not all platforms may have all the thresholds and sensors enabled. Signed-off-by: Wei Ni <wni@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: mediatek: add support for MT8183Michael Kao1-1/+98
MT8183 has two built-in thermal controllers with total six thermal sensors. And it doesn't have bank, so doesn't need to select bank. This patch adds support for mt8183. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05dt-bindings: thermal: add binding document for mt8183 thermal controllerMichael Kao1-0/+1
This patch adds binding document for mt8183 thermal controller. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add flag for bank selectionMichael Kao1-6/+14
For past ic designs, the thermal controller should select banks before reading the thermal sensor. And the new ic design architecture removes this mechanism. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add thermal controller offsetMichael Kao1-25/+54
One thermal controller can read four sensors at most, so we need to add controller_offset for the project with more than four sensors to reuse the same register settings. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add calibration itemMichael Kao1-1/+18
Add calibration item in thermal_data to support the project with different calibration coefficient. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add common index of vts settings.Michael Kao1-24/+69
Each project has different number of vts settings. For the MT2701 just have to set three vts, but the original code flow add five unnecessary vts. Add common index of vts settings for scalablity, and reduce the setting of unnecessary vts. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: fix register index errorMichael Kao1-2/+4
The index of msr and adcpnp should match the sensor which belongs to the selected bank in the for loop. Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.") Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: qoriq: add multiple sensors supportYuantian Tang1-57/+47
The QorIQ Layerscape SoC has several thermal sensors but the current driver only supports one. Massage the code to be sensor oriented and allow the support for multiple sensors. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: broadcom: Add Stingray thermal driverPramod Kumar4-1/+133
Stingray SoC has six temperature sensor and those are configured, controlled and accessed to read temperature and update in DDR memory using m0 firmware. All six sensors has been given 4 bytes of memory in DDR to write temperature in millivolts. This thermal driver read temperature values from DDR because no direct access to sensors. Like this all temparature sensors are monitored and trips at critical temperature. If driver can't handle thermal runaways because of any unknown reason, then firmware in m0 Processor will handle. Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>