aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-02-01net/mlx5e: Update max_opened_tc also when channels are closedMaxim Mikityanskiy1-4/+2
max_opened_tc is used for stats, so that potentially non-zero stats won't disappear when num_tc decreases. However, mlx5e_setup_tc_mqprio fails to update it in the flow where channels are closed. This commit fixes it. The new value of priv->channels.params.num_tc is always checked on exit. In case of errors it will just be the old value, and in case of success it will be the updated value. Fixes: 05909babce53 ("net/mlx5e: Avoid reset netdev stats on configuration changes") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5: Fix leak upon failure of rule creationMaor Gottlieb1-0/+5
When creation of a new rule that requires allocation of an FTE fails, need to call to tree_put_node on the FTE in order to release its' resource. Fixes: cefc23554fc2 ("net/mlx5: Fix FTE cleanup") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5: Fix function calculation for page treesDaniel Jurgens1-1/+1
The function calculation always results in a value of 0. This works generally, but when the release all pages feature is enabled it will result in crashes. Fixes: 0aa128475d33 ("net/mlx5: Maintain separate page trees for ECPF and PF functions") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01docs: networking: swap words in icmp_errors_use_inbound_ifaddr docVincent Bernat1-1/+1
Signed-off-by: Vincent Bernat <vincent@bernat.ch> Link: https://lore.kernel.org/r/20210130190518.854806-1-vincent@bernat.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01udp: ipv4: manipulate network header of NATed UDP GRO fraglistDongseok Yi3-7/+66
UDP/IP header of UDP GROed frag_skbs are not updated even after NAT forwarding. Only the header of head_skb from ip_finish_output_gso -> skb_gso_segment is updated but following frag_skbs are not updated. A call path skb_mac_gso_segment -> inet_gso_segment -> udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list does not try to update UDP/IP header of the segment list but copy only the MAC header. Update port, addr and check of each skb of the segment list in __udp_gso_segment_list. It covers both SNAT and DNAT. Fixes: 9fd1ff5d2ac7 (udp: Support UDP fraglist GRO/GSO.) Signed-off-by: Dongseok Yi <dseok.yi@samsung.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01net: ip_tunnel: fix mtu calculationVadim Fedorenko1-9/+7
dev->hard_header_len for tunnel interface is set only when header_ops are set too and already contains full overhead of any tunnel encapsulation. That's why there is not need to use this overhead twice in mtu calc. Fixes: fdafed459998 ("ip_gre: set dev->hard_header_len and dev->needed_headroom properly") Reported-by: Slava Bacherikov <mail@slava.cc> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1611959267-20536-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01vsock: fix the race conditions in multi-transport supportAlexander Popov1-5/+12
There are multiple similar bugs implicitly introduced by the commit c0cfa2d8a788fcf4 ("vsock: add multi-transports support") and commit 6a2c0962105ae8ce ("vsock: prevent transport modules unloading"). The bug pattern: [1] vsock_sock.transport pointer is copied to a local variable, [2] lock_sock() is called, [3] the local variable is used. VSOCK multi-transport support introduced the race condition: vsock_sock.transport value may change between [1] and [2]. Let's copy vsock_sock.transport pointer to local variables after the lock_sock() call. Fixes: c0cfa2d8a788fcf4 ("vsock: add multi-transports support") Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20210201084719.2257066-1-alex.popov@linux.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01net: sched: replaced invalid qdisc tree flush helper in qdisc_replaceAlexander Ovechkin1-1/+1
Commit e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers") introduced qdisc tree flush/purge helpers, but erroneously used flush helper instead of purge helper in qdisc_replace function. This issue was found in our CI, that tests various qdisc setups by configuring qdisc and sending data through it. Call of invalid helper sporadically leads to corruption of vt_tree/cf_tree of hfsc_class that causes kernel oops: Oops: 0000 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-8f6859df #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:rb_insert_color+0x18/0x190 Code: c3 31 c0 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 07 48 85 c0 0f 84 05 01 00 00 48 8b 10 f6 c2 01 0f 85 34 01 00 00 <48> 8b 4a 08 49 89 d0 48 39 c1 74 7d 48 85 c9 74 32 f6 01 01 75 2d RSP: 0018:ffffc900000b8bb0 EFLAGS: 00010246 RAX: ffff8881ef4c38b0 RBX: ffff8881d956e400 RCX: ffff8881ef4c38b0 RDX: 0000000000000000 RSI: ffff8881d956f0a8 RDI: ffff8881d956e4b0 RBP: 0000000000000000 R08: 000000d5c4e249da R09: 1600000000000000 R10: ffffc900000b8be0 R11: ffffc900000b8b28 R12: 0000000000000001 R13: 000000000000005a R14: ffff8881f0905000 R15: ffff8881f0387d00 FS: 0000000000000000(0000) GS:ffff8881f8b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000001f4796004 CR4: 0000000000060ee0 Call Trace: <IRQ> init_vf.isra.19+0xec/0x250 [sch_hfsc] hfsc_enqueue+0x245/0x300 [sch_hfsc] ? fib_rules_lookup+0x12a/0x1d0 ? __dev_queue_xmit+0x4b6/0x930 ? hfsc_delete_class+0x250/0x250 [sch_hfsc] __dev_queue_xmit+0x4b6/0x930 ? ip6_finish_output2+0x24d/0x590 ip6_finish_output2+0x24d/0x590 ? ip6_output+0x6c/0x130 ip6_output+0x6c/0x130 ? __ip6_finish_output+0x110/0x110 mld_sendpack+0x224/0x230 mld_ifc_timer_expire+0x186/0x2c0 ? igmp6_group_dropped+0x200/0x200 call_timer_fn+0x2d/0x150 run_timer_softirq+0x20c/0x480 ? tick_sched_do_timer+0x60/0x60 ? tick_sched_timer+0x37/0x70 __do_softirq+0xf7/0x2cb irq_exit+0xa0/0xb0 smp_apic_timer_interrupt+0x74/0x150 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers") Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru> Reported-by: Alexander Kuznetsov <wwfq@yandex-team.ru> Acked-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Acked-by: Dmitry Yakunin <zeil@yandex-team.ru> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20210201200049.299153-1-ovov@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01ibmvnic: device remove has higher precedence over resetLijun Pan1-5/+0
Returning -EBUSY in ibmvnic_remove() does not actually hold the removal procedure since driver core doesn't care for the return value (see __device_release_driver() in drivers/base/dd.c calling dev->bus->remove()) though vio_bus_remove (in arch/powerpc/platforms/pseries/vio.c) records the return value and passes it on. [1] During the device removal precedure, checking for resetting bit is dropped so that we can continue executing all the cleanup calls in the rest of the remove function. Otherwise, it can cause latent memory leaks and kernel crashes. [1] https://lore.kernel.org/linuxppc-dev/20210117101242.dpwayq6wdgfdzirl@pengutronix.de/T/#m48f5befd96bc9842ece2a3ad14f4c27747206a53 Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210129043402.95744-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01net: dsa: mv88e6xxx: override existent unicast portvec in port_fdb_addDENG Qingfang1-1/+5
Having multiple destination ports for a unicast address does not make sense. Make port_db_load_purge override existent unicast portvec instead of adding a new port bit. Fixes: 884729399260 ("net: dsa: mv88e6xxx: handle multiple ports in ATU") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20210130134334.10243-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues"Aleksandr Loktionov2-13/+1
This reverts commit 2ad1274fa35ace5c6360762ba48d33b63da2396c VF queues were not brought up when PF was brought up after being downed if the VF driver disabled VFs queues during PF down. This could happen in some older or external VF driver implementations. The problem was that PF driver used vf->queues_enabled as a condition to decide what link-state it would send out which caused the issue. Remove the check for vf->queues_enabled in the VF link notify. Now VF will always be notified of the current link status. Also remove the queues_enabled member from i40e_vf structure as it is not used anymore. Otherwise VNF implementation was broken and caused a link flap. The original commit was a workaround to avoid breaking existing VFs though it's really a fault of the VF code not the PF. The commit should be safe to revert as all of the VFs we know of have been fixed. Also, since we now know there is a related bug in the workaround, removing it is preferred. Fixes: 2ad1274fa35a ("i40e: don't report link up for a VF who hasn't enabled") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: check return value of ret_val in igc_config_fc_after_link_upKevin Lo1-1/+1
Check return value from ret_val to make error check actually work. Fixes: 4eb8080143a9 ("igc: Add setup link functionality") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwrKevin Lo1-2/+1
This patch sets the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr. Without this change it wouldn't lead to a shadow RAM write EEWR timeout. Fixes: ab4056126813 ("igc: Add NVM support") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: Report speed and duplex as unknown when device is runtime suspendedKai-Heng Feng1-1/+2
Similar to commit 165ae7a8feb5 ("igb: Report speed and duplex as unknown when device is runtime suspended"), if we try to read speed and duplex sysfs while the device is runtime suspended, igc will complain and stops working: [ 123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached [ 123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 123.450056] #PF: supervisor read access in kernel mode [ 123.450058] #PF: error_code(0x0000) - not-present page [ 123.450059] PGD 0 P4D 0 [ 123.450064] Oops: 0000 [#1] SMP NOPTI [ 123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G U W OE 5.10.0-1002-oem #2+rkl2-Ubuntu [ 123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc] [ 123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4 [ 123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202 [ 123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000 [ 123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10 [ 123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000 [ 123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008 [ 123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290 [ 123.450094] FS: 00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000 [ 123.450096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0 [ 123.450100] PKRU: 55555554 [ 123.450101] Call Trace: [ 123.450111] igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc] [ 123.450118] __ethtool_get_link_ksettings+0x71/0xb0 [ 123.450123] duplex_show+0x74/0xc0 [ 123.450129] dev_attr_show+0x1d/0x40 [ 123.450134] sysfs_kf_seq_show+0xa1/0x100 [ 123.450137] kernfs_seq_show+0x27/0x30 [ 123.450142] seq_read+0xb7/0x400 [ 123.450148] ? common_file_perm+0x72/0x170 [ 123.450151] kernfs_fop_read+0x35/0x1b0 [ 123.450155] vfs_read+0xb5/0x1b0 [ 123.450157] ksys_read+0x67/0xe0 [ 123.450160] __x64_sys_read+0x1a/0x20 [ 123.450164] do_syscall_64+0x38/0x90 [ 123.450168] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 123.450170] RIP: 0033:0x7f3b351fe142 [ 123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142 [ 123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003 [ 123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320 [ 123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0 [ 123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140 [ 123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel mei_me dell_wmi [ 123.450266] dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake [ 123.450335] CR2: 0000000000000008 [ 123.450338] ---[ end trace 9f731e38b53c35cc ]--- The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks, and calls runtime resume and runtime suspend routine respectively. However, igc is like igb, runtime resume routine uses rtnl_lock() which upper ethtool layer also uses. So to prevent a deadlock on rtnl, take a different approach, use pm_runtime_suspended() to avoid reading register while device is runtime suspended. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-30neighbour: Prevent a dead entry from updating gc_listChinmay Agarwal1-3/+4
Following race condition was detected: <CPU A, t0> - neigh_flush_dev() is under execution and calls neigh_mark_dead(n) marking the neighbour entry 'n' as dead. <CPU B, t1> - Executing: __netif_receive_skb() -> __netif_receive_skb_core() -> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which takes a reference on neighbour entry 'n'. <CPU A, t2> - Moves further along neigh_flush_dev() and calls neigh_cleanup_and_release(n), but since reference count increased in t2, 'n' couldn't be destroyed. <CPU B, t3> - Moves further along, arp_process() and calls neigh_update()-> __neigh_update() -> neigh_update_gc_list(), which adds the neighbour entry back in gc_list(neigh_mark_dead(), removed it earlier in t0 from gc_list) <CPU B, t4> - arp_process() finally calls neigh_release(n), destroying the neighbour entry. This leads to 'n' still being part of gc_list, but the actual neighbour structure has been freed. The situation can be prevented from happening if we disallow a dead entry to have any possibility of updating gc_list. This is what the patch intends to achieve. Fixes: 9c29a2f55ec0 ("neighbor: Fix locking order for gc_list changes") Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210127165453.GA20514@chinagar-linux.qualcomm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29rxrpc: Fix deadlock around release of dst cached on udp tunnelDavid Howells2-6/+6
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst from an incoming packet to get stolen and attached to the UDP socket from whence it is leaked when that socket is closed. When a network namespace is removed, the wait for dst records to be cleaned up happens before the cleanup of the rxrpc and UDP socket, meaning that the wait never finishes. Fix this by moving the rxrpc (and, by dependence, the afs) private per-network namespace registrations to the device group rather than subsys group. This allows cached rxrpc local endpoints to be cleared and their UDP sockets closed before we try waiting for the dst records. The symptom is that lines looking like the following: unregister_netdevice: waiting for lo to become free get emitted at regular intervals after running something like the referenced syzbot test. Thanks to Vadim for tracking this down and work out the fix. Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com Reported-by: Vadim Fedorenko <vfedorenko@novek.ru> Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29r8169: work around RTL8125 UDP hw bugHeiner Kallweit1-6/+65
It was reported that on RTL8125 network breaks under heavy UDP load, e.g. torrent traffic ([0], from comment 27). Realtek confirmed a hw bug and provided me with a test version of the r8125 driver including a workaround. Tests confirmed that the workaround fixes the issue. I modified the original version of the workaround to meet mainline code style. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 v2: - rebased to net v3: - make rtl_skb_is_udp() more robust and use skb_header_pointer() to access the ip(v6) header v4: - remove dependency on ptp_classify.h - replace magic number with offsetof(struct udphdr, len) Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Tested-by: xplo <xplo.bn@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/6e453d49-1801-e6de-d5f7-d7e6c7526c8f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: arcnet: Fix RESET flag handlingAhmed S. Darwish8-14/+78
The main arcnet interrupt handler calls arcnet_close() then arcnet_open(), if the RESET status flag is encountered. This is invalid: 1) In general, interrupt handlers should never call ->ndo_stop() and ->ndo_open() functions. They are usually full of blocking calls and other methods that are expected to be called only from drivers init and exit code paths. 2) arcnet_close() contains a del_timer_sync(). If the irq handler interrupts the to-be-deleted timer, del_timer_sync() will just loop forever. 3) arcnet_close() also calls tasklet_kill(), which has a warning if called from irq context. 4) For device reset, the sequence "arcnet_close(); arcnet_open();" is not complete. Some children arcnet drivers have special init/exit code sequences, which then embed a call to arcnet_open() and arcnet_close() accordingly. Check drivers/net/arcnet/com20020.c. Run the device RESET sequence from a scheduled workqueue instead. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20210128194802.727770-1-a.darwish@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28rxrpc: Fix memory leak in rxrpc_lookup_localTakeshi Misawa1-0/+1
Commit 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked. struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp) - peer->local = local; + peer->local = rxrpc_get_local(local); rxrpc_discard_prealloc also need ref release in discarding. syzbot report: BUG: memory leak unreferenced object 0xffff8881080ddc00 (size 256): comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff ................ backtrace: [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline] [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline] [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline] [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244 [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149 [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64 [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126 [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152 [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342 [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483 [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110 [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226 [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957 [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline] [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline] [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023 [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com> Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28mlxsw: spectrum_span: Do not overwrite policer configurationIdo Schimmel2-0/+7
The purpose of the delayed work in the SPAN module is to potentially update the destination port and various encapsulation parameters of SPAN agents that point to a VLAN device or a GRE tap. The destination port can change following the insertion of a new route, for example. SPAN agents that point to a physical port or the CPU port are static and never change throughout the lifetime of the SPAN agent. Therefore, skip over them in the delayed work. This fixes an issue where the delayed work overwrites the policer that was set on a SPAN agent pointing to the CPU. Modifying the delayed work to inherit the original policer configuration is error-prone, as the same will be needed for any new parameter. Fixes: 4039504e6a0c ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28selftests: forwarding: Specify interface when invoking mausezahnDanielle Ratson2-2/+2
Specify the interface through which packets should be transmitted so that the test will pass regardless of the libnet version against which mausezahn is linked. Fixes: cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects") Fixes: 3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressingVoon Weifeng1-0/+2
Fix an issue where dump stack is printed and Reset Adapter occurs when PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use 32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing. [ 25.535095] ------------[ cut here ]------------ [ 25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out [ 25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260 [ 25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore [ 25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 5.11.0-rc4-intel-lts-MISMAIL5+ #5 [ 25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020 [ 25.659674] RIP: 0010:dev_watchdog+0x259/0x260 [ 25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7 [ 25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286 [ 25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103 [ 25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff [ 25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff [ 25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c [ 25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940 [ 25.731425] FS: 0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000 [ 25.740481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0 [ 25.754900] Call Trace: [ 25.757631] <IRQ> [ 25.759891] ? qdisc_put_unlocked+0x30/0x30 [ 25.764565] ? qdisc_put_unlocked+0x30/0x30 [ 25.769245] call_timer_fn+0x2e/0x140 [ 25.773346] run_timer_softirq+0x1f3/0x430 [ 25.777932] ? __hrtimer_run_queues+0x12c/0x2c0 [ 25.783005] ? ktime_get+0x3e/0xa0 [ 25.786812] __do_softirq+0xa6/0x2ef [ 25.790816] asm_call_irq_on_stack+0xf/0x20 [ 25.795501] </IRQ> [ 25.797852] do_softirq_own_stack+0x5d/0x80 [ 25.802538] irq_exit_rcu+0x94/0xb0 [ 25.806475] sysvec_apic_timer_interrupt+0x42/0xc0 [ 25.811836] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370 [ 25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1 [ 25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206 [ 25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f [ 25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d [ 25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00 [ 25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0 [ 25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000 [ 25.889918] cpuidle_enter+0x29/0x40 [ 25.893922] do_idle+0x24a/0x290 [ 25.897536] cpu_startup_entry+0x19/0x20 [ 25.901930] start_secondary+0x128/0x160 [ 25.906326] secondary_startup_64_no_verify+0xb0/0xbb [ 25.911983] ---[ end trace b4c0c8195d0ba61f ]--- [ 25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter. Fixes: 67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID") Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.Giacinto Cifelli1-0/+6
lsusb -v for this device: Bus 003 Device 007: ID 1e2d:0069 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x0069 bcdDevice 0.00 iManufacturer 4 Cinterion Wireless Modules iProduct 3 PLSx3 iSerial 5 fa3c1419 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 352 bNumInterfaces 10 bConfigurationValue 1 iConfiguration 2 Cinterion Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 3 CDC Union: bMasterInterface 2 bSlaveInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 4 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 5 CDC Union: bMasterInterface 4 bSlaveInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 6 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 7 CDC Union: bMasterInterface 6 bSlaveInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 8 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 0 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Ethernet: iMacAddress 1 00A0C6C14190 bmEthernetStatistics 0x00000000 wMaxSegmentSize 16384 wNumberMCFilters 0x0001 bNumberPowerFilters 0 CDC Union: bMasterInterface 8 bSlaveInterface 9 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 9 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 9 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Revert "mm/slub: fix a memory leak in sysfs_slab_add()"Wang Hai1-3/+1
This reverts commit dde3c6b72a16c2db826f54b2d49bdea26c3534a2. syzbot report a double-free bug. The following case can cause this bug. - mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails, it does: out_free_cache: kmem_cache_free(kmem_cache, s); - but __kmem_cache_create() - at least for slub() - will have done sysfs_slab_add(s) -> sysfs_create_group() .. fails .. -> kobject_del(&s->kobj); .. which frees s ... We can't remove the kmem_cache_free() in create_cache(), because other error cases of __kmem_cache_create() do not free this. So, revert the commit dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()") to fix this. Reported-by: syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com Fixes: dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()") Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Wang Hai <wanghai38@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-27ibmvnic: Ensure that CRQ entry read are correctly orderedLijun Pan1-0/+6
Ensure that received Command-Response Queue (CRQ) entries are properly read in order by the driver. dma_rmb barrier has been added before accessing the CRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27MAINTAINERS: add missing header for bondingJakub Kicinski1-0/+1
include/net/bonding.h is missing from bonding entry. Link: https://lore.kernel.org/r/20210127021844.4071706-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: decnet: fix netdev refcount leaking on error pathVadim Fedorenko1-1/+1
On building the route there is an assumption that the destination could be local. In this case loopback_dev is used to get the address. If the address is still cannot be retrieved dn_route_output_slow returns EADDRNOTAVAIL with loopback_dev reference taken. Cannot find hash for the fixes tag because this code was introduced long time ago. I don't think that this bug has ever fired but the patch is done just to have a consistent code base. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1611619334-20955-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPPRasmus Villemoes1-10/+13
It's not true that switchdev_port_obj_notify() only inspects the ->handled field of "struct switchdev_notifier_port_obj_info" if call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON() triggering for a non-zero return combined with ->handled not being true. But the real problem here is that -EOPNOTSUPP is not being properly handled. The wrapper functions switchdev_handle_port_obj_add() et al change a return value of -EOPNOTSUPP to 0, and the treatment of ->handled in switchdev_port_obj_notify() seems to be designed to change that back to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e., everybody returned -EOPNOTSUPP). Currently, as soon as some device down the stack passes the check_cb() check, ->handled gets set to true, which means that switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP. This, for example, means that the detection of hardware offload support in the MRP code is broken: switchdev_port_obj_add() used by br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP code thinks the generation of MRP test frames has been offloaded, no such frames are actually put on the wire. Similarly, br_mrp_switchdev_set_ring_role() also always returns 0, causing mrp->ring_role_offloaded to be set to 1. To fix this, continue to set ->handled true if any callback returns success or any error distinct from -EOPNOTSUPP. But if all the callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so the logic in switchdev_port_obj_notify() can propagate that information. Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API") Fixes: f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabledJuergen Gross3-1/+16
When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-27can: dev: prevent potential information leak in can_fill_info()Dan Carpenter1-1/+1
The "bec" struct isn't necessarily always initialized. For example, the mcp251xfd_get_berr_counter() function doesn't initialize anything if the interface is down. Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters") Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27xen: Fix XenStore initialisation for XS_LOCALDavid Woodhouse1-0/+31
In commit 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI") I reworked the triggering of xenbus_probe(). I tried to simplify things by taking out the workqueue based startup triggered from wake_waiting(); the somewhat poorly named xenbus IRQ handler. I missed the fact that in the XS_LOCAL case (Dom0 starting its own xenstored or xenstore-stubdom, which happens after the kernel is booted completely), that IRQ-based trigger is still actually needed. So... put it back, except more cleanly. By just spawning a xenbus_probe thread which waits on xb_waitq and runs the probe the first time it gets woken, just as the workqueue-based hack did. This is actually a nicer approach for *all* the back ends with different interrupt methods, and we can switch them all over to that without the complex conditions for when to trigger it. But not in -rc6. This is the minimal fix for the regression, although it's a step in the right direction instead of doing a partial revert and actually putting the workqueue back. It's also simpler than the workqueue. Fixes: 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI") Reported-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/4c9af052a6e0f6485d1de43f2c38b1461996db99.camel@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-26net: fec: Fix temporary RMII clock reset on link upLaurent Badel2-2/+9
fec_restart() does a hard reset of the MAC module when the link status changes to up. This temporarily resets the R_CNTRL register which controls the MII mode of the ENET_OUT clock. In the case of RMII, the clock frequency momentarily drops from 50MHz to 25MHz until the register is reconfigured. Some link partners do not tolerate this glitch and invalidate the link causing failure to establish a stable link when using PHY polling mode. Since as per IEEE802.3 the criteria for link validity are PHY-specific, what the partner should tolerate cannot be assumed, so avoid resetting the MII clock by using software reset instead of hardware reset when the link is up. This is generally relevant only if the SoC provides the clock to an external PHY and the PHY is configured for RMII. Signed-off-by: Laurent Badel <laurentbadel@eaton.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26net: lapb: Add locking to the lapb moduleXie He3-20/+82
In the lapb module, the timers may run concurrently with other code in this module, and there is currently no locking to prevent the code from racing on "struct lapb_cb". This patch adds locking to prevent racing. 1. Add "spinlock_t lock" to "struct lapb_cb"; Add "spin_lock_bh" and "spin_unlock_bh" to APIs, timer functions and notifier functions. 2. Add "bool t1timer_stop, t2timer_stop" to "struct lapb_cb" to make us able to ask running timers to abort; Modify "lapb_stop_t1timer" and "lapb_stop_t2timer" to make them able to abort running timers; Modify "lapb_t2timer_expiry" and "lapb_t1timer_expiry" to make them abort after they are stopped by "lapb_stop_t1timer", "lapb_stop_t2timer", and "lapb_start_t1timer", "lapb_start_t2timer". 3. Let lapb_unregister wait for other API functions and running timers to stop. 4. The lapb_device_event function calls lapb_disconnect_request. In order to avoid trying to hold the lock twice, add a new function named "__lapb_disconnect_request" which assumes the lock is held, and make it called by lapb_disconnect_request and lapb_device_event. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20210126040939.69995-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26team: protect features update by RCU to avoid deadlockIvan Vecera1-3/+3
Function __team_compute_features() is protected by team->lock mutex when it is called from team_compute_features() used when features of an underlying device is changed. This causes a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device is fired due to change propagated from team driver (e.g. MTU change). It's because callbacks like team_change_mtu() or team_vlan_rx_{add,del}_vid() protect their port list traversal by team->lock mutex. Example (r8169 case where this driver disables TSO for certain MTU values): ... [ 6391.348202] __mutex_lock.isra.6+0x2d0/0x4a0 [ 6391.358602] team_device_event+0x9d/0x160 [team] [ 6391.363756] notifier_call_chain+0x47/0x70 [ 6391.368329] netdev_update_features+0x56/0x60 [ 6391.373207] rtl8169_change_mtu+0x14/0x50 [r8169] [ 6391.378457] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.387022] dev_set_mtu+0x52/0x90 [ 6391.390820] team_change_mtu+0x64/0xf0 [team] [ 6391.395683] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.399963] do_setlink+0x231/0xf50 ... In fact team_compute_features() called from team_device_event() does not need to be protected by team->lock mutex and rcu_read_lock() is sufficient there for port list traversal. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26MAINTAINERS: add David Ahern to IPv4/IPv6 maintainersJakub Kicinski1-0/+1
David has been the de-facto maintainer for much of the IP code for the last couple of years, let's make it official. Link: https://lore.kernel.org/r/20210122173220.3579491-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtablePaul Blakey1-7/+13
If a non nat tuple entry is inserted just to the regular tuples rhashtable (ct_tuples_ht) and not to natted tuples rhashtable (ct_nat_tuples_ht). Commit bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables") mixed up the return labels and names sot that on cleanup or failure we still try to remove for the natted tuples rhashtable. Fix that by correctly checking if a natted tuples insertion before removing it. While here make it more readable. Fixes: bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables") Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Revert parameters on errors when changing MTU and LRO state without resetMaxim Mikityanskiy1-9/+21
Sometimes, channel params are changed without recreating the channels. It happens in two basic cases: when the channels are closed, and when the parameter being changed doesn't affect how channels are configured. Such changes invoke a hardware command that might fail. The whole operation should be reverted in such cases, but the code that restores the parameters' values in the driver was missing. This commit adds this handling. Fixes: 2e20a151205b ("net/mlx5e: Fail safe mtu and lro setting") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Revert parameters on errors when changing trust state without resetMaxim Mikityanskiy1-5/+8
Trust state may be changed without recreating the channels. It happens when the channels are closed, and when channel parameters (min inline mode) stay the same after changing the trust state. Changing the trust state is a hardware command that may fail. The current code didn't restore the channel parameters to their old values if an error happened and the channels were closed. This commit adds handling for this case. Fixes: 6e0504c69811 ("net/mlx5e: Change inline mode correctly when changing trust state") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Correctly handle changing the number of queues when the interface is downMaxim Mikityanskiy2-1/+14
This commit addresses two issues related to changing the number of queues when the channels are closed: 1. Missing call to mlx5e_num_channels_changed to update real_num_tx_queues when the number of TCs is changed. 2. When mlx5e_num_channels_changed returns an error, the channel parameters must be reverted. Two Fixes: tags correspond to the first commits where these two issues were introduced. Fixes: 3909a12e7913 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases") Fixes: fa3748775b92 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Fix CT rule + encap slow path offload and deletionPaul Blakey1-0/+7
Currently, if a neighbour isn't valid when offloading tunnel encap rules, we offload the original match and replace the original action with "goto slow path" action. For this we use a temporary flow attribute based on the original flow attribute and then change the action. Flow flags, which among those is the CT flag, are still shared for the slow path rule offload, so we end up parsing this flow as a CT + goto slow path rule. Besides being unnecessary, CT action offload saves extra information in the passed flow attribute, such as created ct_flow and mod_hdr, which is lost onces the temporary flow attribute is freed. When a neigh is updated and is valid, we offload the original CT rule with original CT action, which again creates a ct_flow and mod_hdr and saves it in the flow's original attribute. Then we delete the slow path rule with a temporary flow attribute based on original updated flow attribute, and we free the relevant ct_flow and mod_hdr. Then when tc deletes this flow, we try to free the ct_flow and mod_hdr on the flow's attribute again. To fix the issue, skip all furture proccesing (CT/Sample/Split rules) in offload/unoffload of slow path rules. Call trace: [ 758.850525] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000218 [ 758.952987] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 758.964170] Modules linked in: act_csum(E) act_pedit(E) act_tunnel_key(E) act_ct(E) nf_flow_table(E) xt_nat(E) ip6table_filter(E) ip6table_nat(E) xt_comment(E) ip6_tables(E) xt_conntrack(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) iptable_filter(E) iptable_nat(E) bpfilter(E) br_netfilter(E) bridge(E) stp(E) llc(E) xfrm_user(E) overlay(E) act_mirred(E) act_skbedit(E) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) esp6_offload(E) esp6(E) esp4_offload(E) esp4(E) xfrm_algo(E) mlx5_ib(OE) ib_uverbs(OE) geneve(E) ip6_udp_tunnel(E) udp_tunnel(E) nfnetlink_cttimeout(E) nfnetlink(E) mlx5_core(OE) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_conncount(E) nf_nat(E) mlxfw(OE) psample(E) nf_conntrack(E) nf_defrag_ipv4(E) vfio_mdev(E) mdev(E) ib_core(OE) mlx_compat(OE) crct10dif_ce(E) uio_pdrv_genirq(E) uio(E) i2c_mlx(E) mlxbf_pmc(E) sbsa_gwdt(E) mlxbf_gige(E) gpio_mlxbf2(E) mlxbf_pka(E) mlx_trio(E) mlx_bootctl(E) bluefield_edac(E) knem(O) [ 758.964225] ip_tables(E) mlxbf_tmfifo(E) ipv6(E) crc_ccitt(E) nf_defrag_ipv6(E) [ 759.154186] CPU: 5 PID: 122 Comm: kworker/u16:1 Tainted: G OE 5.4.60-mlnx.52.gde81e85 #1 [ 759.172870] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.5.0-2-gc1b5d64 Jan 4 2021 [ 759.195466] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [ 759.207344] pstate: a0000005 (NzCv daif -PAN -UAO) [ 759.217003] pc : mlx5_del_flow_rules+0x5c/0x160 [mlx5_core] [ 759.228229] lr : mlx5_del_flow_rules+0x34/0x160 [mlx5_core] [ 759.405858] Call trace: [ 759.410804] mlx5_del_flow_rules+0x5c/0x160 [mlx5_core] [ 759.421337] __mlx5_eswitch_del_rule.isra.43+0x5c/0x1c8 [mlx5_core] [ 759.433963] mlx5_eswitch_del_offloaded_rule_ct+0x34/0x40 [mlx5_core] [ 759.446942] mlx5_tc_rule_delete_ct+0x68/0x74 [mlx5_core] [ 759.457821] mlx5_tc_ct_delete_flow+0x160/0x21c [mlx5_core] [ 759.469051] mlx5e_tc_unoffload_fdb_rules+0x158/0x168 [mlx5_core] [ 759.481325] mlx5e_tc_encap_flows_del+0x140/0x26c [mlx5_core] [ 759.492901] mlx5e_rep_update_flows+0x11c/0x1ec [mlx5_core] [ 759.504127] mlx5e_rep_neigh_update+0x160/0x200 [mlx5_core] [ 759.515314] process_one_work+0x178/0x400 [ 759.523350] worker_thread+0x58/0x3e8 [ 759.530685] kthread+0x100/0x12c [ 759.537152] ret_from_fork+0x10/0x18 [ 759.544320] Code: 97ffef55 51000673 3100067f 54ffff41 (b9421ab3) [ 759.556548] ---[ end trace fab818bb1085832d ]--- Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabledMaor Dickman2-1/+3
The cited commit introduce new CONFIG_MLX5_CLS_ACT kconfig variable to control compilation of TC hardware offloads implementation. When this configuration is disabled the driver is still wrongly reports in ethtool that hw-tc-offload is supported. Fixed by reporting hw-tc-offload is supported only when CONFIG_MLX5_CLS_ACT is enabled. Fixes: d956873f908c ("net/mlx5e: Introduce kconfig var for TC support") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5: Maintain separate page trees for ECPF and PF functionsDaniel Jurgens1-24/+34
Pages for the host PF and ECPF were stored in the same tree, so the ECPF pages were being freed along with the host PF's when the host driver unloaded. Combine the function ID and ECPF flag to use as an index into the x-array containing the trees to get a different tree for the host PF and ECPF. Fixes: c6168161f693 ("net/mlx5: Add support for release all pages event") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Fix IPSEC statsMaxim Mikityanskiy1-2/+2
When IPSEC offload isn't active, the number of stats is not zero, but the strings are not filled, leading to exposing stats with empty names. Fix this by using the same condition for NUM_STATS and FILL_STRS. Fixes: 0aab3e1b04ae ("net/mlx5e: IPSec, Expose IPsec HW stat only for supporting HW") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Reduce tc unsupported key print levelMaor Dickman1-2/+2
"Unsupported key used:" appears in kernel log when flows with unsupported key are used, arp fields for example. OpenVSwitch was changed to match on arp fields by default that caused this warning to appear in kernel log for every arp rule, which can be a lot. Fix by lowering print level from warning to debug. Fixes: e3a2b7ed018e ("net/mlx5e: Support offload cls_flower with drop action") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: free page before returnPan Bian1-1/+1
Instead of directly return, goto the error handling label to free allocated page. Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: E-switch, Fix rate calculation for overflowParav Pandit1-3/+8
rate_bytes_ps is a 64-bit field. It passed as 32-bit field to apply_police_params(). Due to this when police rate is higher than 4Gbps, 32-bit calculation ignores the carry. This results in incorrect rate configurationn the device. Fix it by performing 64-bit calculation. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5: Fix memory leak on flow table creation error flowRoi Dayan1-0/+1
When we create the ft object we also init rhltable in ft->fgs_hash. So in error flow before kfree of ft we need to destroy that rhltable. Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26iwlwifi: provide gso_type to GSO packetsEric Dumazet1-0/+3
net/core/tso.c got recent support for USO, and this broke iwlfifi because the driver implemented a limited form of GSO. Providing ->gso_type allows for skb_is_gso_tcp() to provide a correct result. Fixes: 3d5b459ba0e3 ("net: tso: add UDP segmentation support") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209913 Link: https://lore.kernel.org/r/20210125150949.619309-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bpf, preload: Fix build when $(O) points to a relative pathQuentin Monnet1-1/+4
Building the kernel with CONFIG_BPF_PRELOAD, and by providing a relative path for the output directory, may fail with the following error: $ make O=build bindeb-pkg ... /.../linux/tools/scripts/Makefile.include:5: *** O=build does not exist. Stop. make[7]: *** [/.../linux/kernel/bpf/preload/Makefile:9: kernel/bpf/preload/libbpf.a] Error 2 make[6]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf/preload] Error 2 make[5]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf] Error 2 make[4]: *** [/.../linux/Makefile:1799: kernel] Error 2 make[4]: *** Waiting for unfinished jobs.... In the case above, for the "bindeb-pkg" target, the error is produced by the "dummy" check in Makefile.include, called from libbpf's Makefile. This check changes directory to $(PWD) before checking for the existence of $(O). But at this step we have $(PWD) pointing to "/.../linux/build", and $(O) pointing to "build". So the Makefile.include tries in fact to assert the existence of a directory named "/.../linux/build/build", which does not exist. Note that the error does not occur for all make targets and architectures combinations. This was observed on x86 for "bindeb-pkg", or for a regular build for UML [0]. Here are some details. The root Makefile recursively calls itself once, after changing directory to $(O). The content for the variable $(PWD) is preserved across recursive calls to make, so it is unchanged at this step. For "bindeb-pkg", $(PWD) is eventually updated because the target writes a new Makefile (as debian/rules) and calls it indirectly through dpkg-buildpackage. This script does not preserve $(PWD), which is reset to the current working directory when the target in debian/rules is called. Although not investigated, it seems likely that something similar causes UML to change its value for $(PWD). Non-trivial fixes could be to remove the use of $(PWD) from the "dummy" check, or to make sure that $(PWD) and $(O) are preserved or updated to always play well and form a valid $(PWD)/$(O) path across the different targets and architectures. Instead, we take a simpler approach and just update $(O) when calling libbpf's Makefile, so it points to an absolute path which should always resolve for the "dummy" check run (through includes) by that Makefile. David Gow previously posted a slightly different version of this patch as a RFC [0], two months ago or so. [0] https://lore.kernel.org/bpf/20201119085022.3606135-1-davidgow@google.com/t/#u Fixes: d71fa5c9763c ("bpf: Add kernel module with user mode driver that populates bpffs.") Reported-by: David Gow <davidgow@google.com> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/bpf/20210126161320.24561-1-quentin@isovalent.com
2021-01-26igc: fix link speed advertisingCorinna Vinschen1-6/+18
Link speed advertising in igc has two problems: - When setting the advertisement via ethtool, the link speed is converted to the legacy 32 bit representation for the intel PHY code. This inadvertently drops ETHTOOL_LINK_MODE_2500baseT_Full_BIT (being beyond bit 31). As a result, any call to `ethtool -s ...' drops the 2500Mbit/s link speed from the PHY settings. Only reloading the driver alleviates that problem. Fix this by converting the ETHTOOL_LINK_MODE_2500baseT_Full_BIT to the Intel PHY ADVERTISE_2500_FULL bit explicitly. - Rather than checking the actual PHY setting, the .get_link_ksettings function always fills link_modes.advertising with all link speeds the device is capable of. Fix this by checking the PHY autoneg_advertised settings and report only the actually advertised speeds up to ethtool. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.