aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-06x86/mm/doc: Enhance the x86-64 virtual memory layout descriptionsIngo Molnar1-51/+120
After the cleanups from Baoquan He, make it even more readable: - Remove the 'bits' area size column: it's pretty pointless and was even wrong for some of the entries. Given that MB, GB, TB, PT are 10, 20, 30 and 40 bits, a "8 TB" size description makes it obvious that it's 43 bits. - Introduce an "offset" column: -------------------------------------------------------------------------------- start addr | offset | end addr | size | VM area description -----------------|------------|------------------|---------|-------------------- ... ffff880000000000 | -120 TB | ffffc7ffffffffff | 64 TB | direct mapping of all physical memory (page_offset_base), this is what limits max physical memory supported. The -120 TB notation makes it obvious where this particular virtual memory region starts: 120 TB down from the top of the 64-bit virtual memory space. Especially the layout of the kernel mappings is a *lot* more obvious when written this way, plus it's much easier to compare it with the size column and understand/check/validate and modify the kernel's layout in the future. - Mark the part from where the 47-bit and 56-bit kernel layouts are 100% identical, this starts at the -512 GB offset and the EFI region. - Re-shuffle the size desciptions to be continous blocks of sizes, instead of the often mixed size. I.e. write "0.5 TB" instead of "512 GB" if we are still in the TB-granular region of the map. - Make the 47-bit and 56-bit descriptions use the *exact* same layout and wording, and only differ where there's a material difference. This makes it easy to compare the two tables side by side by switching between two terminal tabs. - Plus enhance a lot of other stylistic/typographical details: make the tables explicitly tabular, add headers, enhance certain entries, etc. etc. Note that there are some apparent errors in the tables as well, but I'll fix them in a separate patch to make it easier to review/validate. Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: thgarnie@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-06x86/mm/doc: Clean up the x86-64 virtual memory layout descriptionsBaoquan He1-42/+42
In Documentation/x86/x86_64/mm.txt, the description of the x86-64 virtual memory layout has become a confusing hodgepodge of inconsistencies: - there's a hard to read mixture of 'TB' and 'bits' notation - the entries sometimes mention a size in the description and sometimes not - sometimes they list holes by address, sometimes only as an 'unused hole' line So make it all a coherent, readable, well organized description. Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Cc: thgarnie@google.com Link: http://lkml.kernel.org/r/20181006084327.27467-3-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-06x86/KASLR: Update KERNEL_IMAGE_SIZE descriptionBaoquan He1-6/+9
Currently CONFIG_RANDOMIZE_BASE=y is set by default, which makes some of the old comments above the KERNEL_IMAGE_SIZE definition out of date. Update them to the current state of affairs. Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Cc: thgarnie@google.com Link: http://lkml.kernel.org/r/20181006084327.27467-2-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-06kdump, proc/vmcore: Enable kdumping encrypted memory with SME enabledLianbo Jiang3-25/+63
In the kdump kernel, the memory of the first kernel needs to be dumped into the vmcore file. If SME is enabled in the first kernel, the old memory has to be remapped with the memory encryption mask in order to access it properly. Split copy_oldmem_page() functionality to handle encrypted memory properly. [ bp: Heavily massage everything. ] Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: kexec@lists.infradead.org Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: akpm@linux-foundation.org Cc: dan.j.williams@intel.com Cc: bhelgaas@google.com Cc: baiyaowei@cmss.chinamobile.com Cc: tiwai@suse.de Cc: brijesh.singh@amd.com Cc: dyoung@redhat.com Cc: bhe@redhat.com Cc: jroedel@suse.de Link: https://lkml.kernel.org/r/be7b47f9-6be6-e0d1-2c2a-9125bc74b818@redhat.com
2018-10-06iommu/amd: Remap the IOMMU device table with the memory encryption mask for kdumpLianbo Jiang1-2/+12
The kdump kernel copies the IOMMU device table from the old device table which is encrypted when SME is enabled in the first kernel. So remap the old device table with the memory encryption mask in the kdump kernel. [ bp: Massage commit message. ] Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: kexec@lists.infradead.org Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: akpm@linux-foundation.org Cc: dan.j.williams@intel.com Cc: bhelgaas@google.com Cc: baiyaowei@cmss.chinamobile.com Cc: tiwai@suse.de Cc: brijesh.singh@amd.com Cc: dyoung@redhat.com Cc: bhe@redhat.com Link: https://lkml.kernel.org/r/20180930031033.22110-4-lijiang@redhat.com
2018-10-06kexec: Allocate decrypted control pages for kdump if SME is enabledLianbo Jiang1-0/+6
When SME is enabled in the first kernel, it needs to allocate decrypted pages for kdump because when the kdump kernel boots, these pages need to be accessed decrypted in the initial boot stage, before SME is enabled. [ bp: clean up text. ] Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: kexec@lists.infradead.org Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: akpm@linux-foundation.org Cc: dan.j.williams@intel.com Cc: bhelgaas@google.com Cc: baiyaowei@cmss.chinamobile.com Cc: tiwai@suse.de Cc: brijesh.singh@amd.com Cc: dyoung@redhat.com Cc: bhe@redhat.com Cc: jroedel@suse.de Link: https://lkml.kernel.org/r/20180930031033.22110-3-lijiang@redhat.com
2018-10-06x86/ioremap: Add an ioremap_encrypted() helperLianbo Jiang2-9/+18
When SME is enabled, the memory is encrypted in the first kernel. In this case, SME also needs to be enabled in the kdump kernel, and we have to remap the old memory with the memory encryption mask. The case of concern here is if SME is active in the first kernel, and it is active too in the kdump kernel. There are four cases to be considered: a. dump vmcore It is encrypted in the first kernel, and needs be read out in the kdump kernel. b. crash notes When dumping vmcore, the people usually need to read useful information from notes, and the notes is also encrypted. c. iommu device table It's encrypted in the first kernel, kdump kernel needs to access its content to analyze and get information it needs. d. mmio of AMD iommu not encrypted in both kernels Add a new bool parameter @encrypted to __ioremap_caller(). If set, memory will be remapped with the SME mask. Add a new function ioremap_encrypted() to explicitly pass in a true value for @encrypted. Use ioremap_encrypted() for the above a, b, c cases. [ bp: cleanup commit message, extern defs in io.h and drop forgotten include. ] Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: kexec@lists.infradead.org Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: akpm@linux-foundation.org Cc: dan.j.williams@intel.com Cc: bhelgaas@google.com Cc: baiyaowei@cmss.chinamobile.com Cc: tiwai@suse.de Cc: brijesh.singh@amd.com Cc: dyoung@redhat.com Cc: bhe@redhat.com Cc: jroedel@suse.de Link: https://lkml.kernel.org/r/20180927071954.29615-2-lijiang@redhat.com
2018-10-03x86/mm: Fix typo in commentTakuya Yamamoto1-1/+1
Signed-off-by: Takuya Yamamoto <tkyymmt01@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20180829072730.988-1-tkyymmt01@gmail.com
2018-09-27x86/mm/cpa: Optimize __cpa_flush_range()Peter Zijlstra1-1/+1
If we IPI for WBINDV, then we might as well kill the entire TLB too. But if we don't have to invalidate cache, there is no reason not to use a range TLB flush. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180919085948.195633798@infradead.org
2018-09-27x86/mm/cpa: Factor common code between cpa_flush_*()Peter Zijlstra1-16/+13
The start of cpa_flush_range() and cpa_flush_array() is the same, use a common function. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180919085948.138859183@infradead.org
2018-09-27x86/mm/cpa: Move CLFLUSH test into cpa_flush_array()Peter Zijlstra1-11/+16
Rather than guarding cpa_flush_array() users with a CLFLUSH test, put it inside. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180919085948.087848187@infradead.org
2018-09-27x86/mm/cpa: Move CLFLUSH test into cpa_flush_range()Peter Zijlstra1-8/+7
Rather than guarding all cpa_flush_range() uses with a CLFLUSH test, put it inside. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180919085948.036195503@infradead.org
2018-09-27x86/mm/cpa: Use flush_tlb_kernel_range()Peter Zijlstra1-4/+5
Both cpa_flush_range() and cpa_flush_array() have a well specified range, use that to do a range based TLB invalidate. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180919085947.985193217@infradead.org
2018-09-27x86/mm/cpa: Unconditionally avoid WBINDV when we canPeter Zijlstra1-16/+2
CAT has happened, WBINDV is bad (even before CAT blowing away the entire cache on a multi-core platform wasn't nice), try not to use it ever. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180919085947.933674526@infradead.org
2018-09-27x86/mm/cpa: Move flush_tlb_all()Peter Zijlstra1-27/+17
There is an atom errata, where we do a local TLB invalidate right before we return and then do a global TLB invalidate. Move the global invalidate up a little bit and avoid the local invalidate entirely. This does put the global invalidate under pgd_lock, but that shouldn't matter. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180919085947.882287392@infradead.org
2018-09-27x86/mm/cpa: Use flush_tlb_all()Peter Zijlstra1-11/+1
Instead of open-coding it.. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180919085947.831102058@infradead.org
2018-09-27x86/mm/cpa: Avoid the 4k pages check completelyThomas Gleixner1-48/+16
The extra loop which tries hard to preserve large pages in case of conflicts with static protection regions turns out to be not preserving anything, at least not in the experiments which have been conducted. There might be corner cases in which the code would be able to preserve a large page oaccsionally, but it's really not worth the extra code and the cycles wasted in the common case. Before: 1G pages checked: 2 1G pages sameprot: 0 1G pages preserved: 0 2M pages checked: 541 2M pages sameprot: 466 2M pages preserved: 47 4K pages checked: 514 4K pages set-checked: 7668 After: 1G pages checked: 2 1G pages sameprot: 0 1G pages preserved: 0 2M pages checked: 538 2M pages sameprot: 466 2M pages preserved: 47 4K pages set-checked: 7668 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143546.589642503@linutronix.de
2018-09-27x86/mm/cpa: Do the range check earlyThomas Gleixner1-4/+23
To avoid excessive 4k wise checks in the common case do a quick check first whether the requested new page protections conflict with a static protection area in the large page. If there is no conflict then the decision whether to preserve or to split the page can be made immediately. If the requested range covers the full large page, preserve it. Otherwise split it up. No point in doing a slow crawl in 4k steps. Before: 1G pages checked: 2 1G pages sameprot: 0 1G pages preserved: 0 2M pages checked: 538 2M pages sameprot: 466 2M pages preserved: 47 4K pages checked: 560642 4K pages set-checked: 7668 After: 1G pages checked: 2 1G pages sameprot: 0 1G pages preserved: 0 2M pages checked: 541 2M pages sameprot: 466 2M pages preserved: 47 4K pages checked: 514 4K pages set-checked: 7668 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143546.507259989@linutronix.de
2018-09-27x86/mm/cpa: Optimize same protection checkThomas Gleixner1-0/+14
When the existing mapping is correct and the new requested page protections are the same as the existing ones, then further checks can be omitted and the large page can be preserved. The slow path 4k wise check will not come up with a different result. Before: 1G pages checked: 2 1G pages sameprot: 0 1G pages preserved: 0 2M pages checked: 540 2M pages sameprot: 466 2M pages preserved: 47 4K pages checked: 800709 4K pages set-checked: 7668 After: 1G pages checked: 2 1G pages sameprot: 0 1G pages preserved: 0 2M pages checked: 538 2M pages sameprot: 466 2M pages preserved: 47 4K pages checked: 560642 4K pages set-checked: 7668 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143546.424477581@linutronix.de
2018-09-27x86/mm/cpa: Add sanity check for existing mappingsThomas Gleixner1-10/+67
With the range check it is possible to do a quick verification that the current mapping is correct vs. the static protection areas. In case a incorrect mapping is detected a warning is emitted and the large page is split up. If the large page is a 2M page, then the split code is forced to check the static protections for the PTE entries to fix up the incorrectness. For 1G pages this can't be done easily because that would require to either find the offending 2M areas before the split or afterwards. For now just warn about that case and revisit it when reported. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143546.331408643@linutronix.de
2018-09-27x86/mm/cpa: Avoid static protection checks on unmapThomas Gleixner1-0/+7
If the new pgprot has the PRESENT bit cleared, then conflicts vs. RW/NX are completely irrelevant. Before: 1G pages checked: 2 1G pages sameprot: 0 1G pages preserved: 0 2M pages checked: 540 2M pages sameprot: 466 2M pages preserved: 47 4K pages checked: 800770 4K pages set-checked: 7668 After: 1G pages checked: 2 1G pages sameprot: 0 1G pages preserved: 0 2M pages checked: 540 2M pages sameprot: 466 2M pages preserved: 47 4K pages checked: 800709 4K pages set-checked: 7668 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143546.245849757@linutronix.de
2018-09-27x86/mm/cpa: Add large page preservation statisticsThomas Gleixner2-2/+105
The large page preservation mechanism is just magic and provides no information at all. Add optional statistic output in debugfs so the magic can be evaluated. Defaults is off. Output: 1G pages checked: 2 1G pages sameprot: 0 1G pages preserved: 0 2M pages checked: 540 2M pages sameprot: 466 2M pages preserved: 47 4K pages checked: 800770 4K pages set-checked: 7668 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143546.160867778@linutronix.de
2018-09-27x86/mm/cpa: Add debug mechanismThomas Gleixner1-9/+52
The whole static protection magic is silently fixing up anything which is handed in. That's just wrong. The offending call sites need to be fixed. Add a debug mechanism which emits a warning if a requested mapping needs to be fixed up. The DETECT debug mechanism is really not meant to be enabled except for developers, so limit the output hard to the protection fixups. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143546.078998733@linutronix.de
2018-09-27x86/mm/cpa: Allow range check for static protectionsThomas Gleixner1-25/+44
Checking static protections only page by page is slow especially for huge pages. To allow quick checks over a complete range, add the ability to do that. Make the checks inclusive so the ranges can be directly used for debug output later. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143545.995734490@linutronix.de
2018-09-27x86/mm/cpa: Rework static_protections()Thomas Gleixner1-64/+98
static_protections() is pretty unreadable. Split it up into separate checks for each protection area. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143545.913005317@linutronix.de
2018-09-27x86/mm/cpa: Split, rename and clean up try_preserve_large_page()Thomas Gleixner1-61/+60
Avoid the extra variable and gotos by splitting the function into the actual algorithm and a callable function which contains the lock protection. Rename it to should_split_large_page() while at it so the return values make actually sense. Clean up the code flow, comments and general whitespace damage while at it. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143545.830507216@linutronix.de
2018-09-27x86/mm/init32: Mark text and rodata RO in one goThomas Gleixner1-19/+4
The sequence of marking text and rodata read-only in 32bit init is: set_ro(text); kernel_set_to_readonly = 1; set_ro(rodata); When kernel_set_to_readonly is 1 it enables the protection mechanism in CPA for the read only regions. With the upcoming checks for existing mappings this consequently triggers the warning about an existing mapping being incorrect vs. static protections because rodata has not been converted yet. There is no technical reason to split the two, so just combine the RO protection to convert text and rodata in one go. Convert the printks to pr_info while at it. Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bin Yang <bin.yang@intel.com> Cc: Mark Gross <mark.gross@intel.com> Link: https://lkml.kernel.org/r/20180917143545.731701535@linutronix.de
2018-09-23Linux 4.19-rc5Greg Kroah-Hartman1-1/+1
2018-09-21block: use nanosecond resolution for iostatOmar Sandoval5-11/+12
Klaus Kusche reported that the I/O busy time in /proc/diskstats was not updating properly on 4.18. This is because we started using ktime to track elapsed time, and we convert nanoseconds to jiffies when we update the partition counter. However, this gets rounded down, so any I/Os that take less than a jiffy are not accounted for. Previously in this case, the value of jiffies would sometimes increment while we were doing I/O, so at least some I/Os were accounted for. Let's convert the stats to use nanoseconds internally. We still report milliseconds as before, now more accurately than ever. The value is still truncated to 32 bits for backwards compatibility. Fixes: 522a777566f5 ("block: consolidate struct request timestamp fields") Cc: stable@vger.kernel.org Reported-by: Klaus Kusche <klaus.kusche@computerix.info> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20x86/mm: Expand static page table for fixmap spaceFeng Tang6-8/+42
We met a kernel panic when enabling earlycon, which is due to the fixmap address of earlycon is not statically setup. Currently the static fixmap setup in head_64.S only covers 2M virtual address space, while it actually could be in 4M space with different kernel configurations, e.g. when VSYSCALL emulation is disabled. So increase the static space to 4M for now by defining FIXMAP_PMD_NUM to 2, and add a build time check to ensure that the fixmap is covered by the initial static page tables. Fixes: 1ad83c858c7d ("x86_64,vsyscall: Make vsyscall emulation configurable") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: kernel test robot <rong.a.chen@intel.com> Reviewed-by: Juergen Gross <jgross@suse.com> (Xen parts) Cc: H Peter Anvin <hpa@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180920025828.23699-1-feng.tang@intel.com
2018-09-20ocfs2: fix ocfs2 read block panicJunxiao Bi1-0/+1
While reading block, it is possible that io error return due to underlying storage issue, in this case, BH_NeedsValidate was left in the buffer head. Then when reading the very block next time, if it was already linked into journal, that will trigger the following panic. [203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342! [203748.702533] invalid opcode: 0000 [#1] SMP [203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2 [203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015 [203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000 [203748.703088] RIP: 0010:[<ffffffffa05e9f09>] [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.703130] RSP: 0018:ffff88006ff4b818 EFLAGS: 00010206 [203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000 [203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe [203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0 [203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000 [203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000 [203748.705871] FS: 00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000 [203748.706370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670 [203748.707124] Stack: [203748.707371] ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001 [203748.707885] 0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00 [203748.708399] 00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000 [203748.708915] Call Trace: [203748.709175] [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2] [203748.709680] [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2] [203748.710185] [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2] [203748.710691] [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2] [203748.711204] [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2] [203748.711716] [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2] [203748.712227] [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2] [203748.712737] [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2] [203748.713003] [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2] [203748.713263] [<ffffffff8121714b>] vfs_create+0xdb/0x150 [203748.713518] [<ffffffff8121b225>] do_last+0x815/0x1210 [203748.713772] [<ffffffff812192e9>] ? path_init+0xb9/0x450 [203748.714123] [<ffffffff8121bca0>] path_openat+0x80/0x600 [203748.714378] [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620 [203748.714634] [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0 [203748.714888] [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130 [203748.715143] [<ffffffff81209ffc>] do_sys_open+0x12c/0x220 [203748.715403] [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180 [203748.715668] [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190 [203748.715928] [<ffffffff8120a10e>] SyS_open+0x1e/0x20 [203748.716184] [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7 [203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10 [203748.717505] RIP [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.717775] RSP <ffff88006ff4b818> Joesph ever reported a similar panic. Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20mm: slowly shrink slabs with a relatively small number of objectsRoman Gushchin1-0/+11
9092c71bb724 ("mm: use sc->priority for slab shrink targets") changed the way that the target slab pressure is calculated and made it priority-based: delta = freeable >> priority; delta *= 4; do_div(delta, shrinker->seeks); The problem is that on a default priority (which is 12) no pressure is applied at all, if the number of potentially reclaimable objects is less than 4096 (1<<12). This causes the last objects on slab caches of no longer used cgroups to (almost) never get reclaimed. It's obviously a waste of memory. It can be especially painful, if these stale objects are holding a reference to a dying cgroup. Slab LRU lists are reparented on memcg offlining, but corresponding objects are still holding a reference to the dying cgroup. If we don't scan these objects, the dying cgroup can't go away. Most likely, the parent cgroup hasn't any directly charged objects, only remaining objects from dying children cgroups. So it can easily hold a reference to hundreds of dying cgroups. If there are no big spikes in memory pressure, and new memory cgroups are created and destroyed periodically, this causes the number of dying cgroups grow steadily, causing a slow-ish and hard-to-detect memory "leak". It's not a real leak, as the memory can be eventually reclaimed, but it could not happen in a real life at all. I've seen hosts with a steadily climbing number of dying cgroups, which doesn't show any signs of a decline in months, despite the host is loaded with a production workload. It is an obvious waste of memory, and to prevent it, let's apply a minimal pressure even on small shrinker lists. E.g. if there are freeable objects, let's scan at least min(freeable, scan_batch) objects. This fix significantly improves a chance of a dying cgroup to be reclaimed, and together with some previous patches stops the steady growth of the dying cgroups number on some of our hosts. Link: http://lkml.kernel.org/r/20180905230759.12236-1-guro@fb.com Fixes: 9092c71bb724 ("mm: use sc->priority for slab shrink targets") Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Rik van Riel <riel@surriel.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20kernel/sys.c: remove duplicated includeYueHaibing1-3/+0
Link: http://lkml.kernel.org/r/20180821133424.18716-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20mm: shmem.c: Correctly annotate new inodes for lockdepJoel Fernandes (Google)1-0/+2
Directories and inodes don't necessarily need to be in the same lockdep class. For ex, hugetlbfs splits them out too to prevent false positives in lockdep. Annotate correctly after new inode creation. If its a directory inode, it will be put into a different class. This should fix a lockdep splat reported by syzbot: > ====================================================== > WARNING: possible circular locking dependency detected > 4.18.0-rc8-next-20180810+ #36 Not tainted > ------------------------------------------------------ > syz-executor900/4483 is trying to acquire lock: > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock > include/linux/fs.h:765 [inline] > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > > but task is already holding lock: > 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630 > drivers/staging/android/ashmem.c:448 > > which lock already depends on the new lock. > > -> #2 (ashmem_mutex){+.+.}: > __mutex_lock_common kernel/locking/mutex.c:925 [inline] > __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 > mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 > ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361 > call_mmap include/linux/fs.h:1844 [inline] > mmap_region+0xf27/0x1c50 mm/mmap.c:1762 > do_mmap+0xa10/0x1220 mm/mmap.c:1535 > do_mmap_pgoff include/linux/mm.h:2298 [inline] > vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357 > ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585 > __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline] > __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline] > __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #1 (&mm->mmap_sem){++++}: > __might_fault+0x155/0x1e0 mm/memory.c:4568 > _copy_to_user+0x30/0x110 lib/usercopy.c:25 > copy_to_user include/linux/uaccess.h:155 [inline] > filldir+0x1ea/0x3a0 fs/readdir.c:196 > dir_emit_dot include/linux/fs.h:3464 [inline] > dir_emit_dots include/linux/fs.h:3475 [inline] > dcache_readdir+0x13a/0x620 fs/libfs.c:193 > iterate_dir+0x48b/0x5d0 fs/readdir.c:51 > __do_sys_getdents fs/readdir.c:231 [inline] > __se_sys_getdents fs/readdir.c:212 [inline] > __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #0 (&sb->s_type->i_mutex_key#9){++++}: > lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 > down_write+0x8f/0x130 kernel/locking/rwsem.c:70 > inode_lock include/linux/fs.h:765 [inline] > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455 > ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797 > vfs_ioctl fs/ioctl.c:46 [inline] > file_ioctl fs/ioctl.c:501 [inline] > do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685 > ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702 > __do_sys_ioctl fs/ioctl.c:709 [inline] > __se_sys_ioctl fs/ioctl.c:707 [inline] > __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > other info that might help us debug this: > > Chain exists of: > &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(ashmem_mutex); > lock(&mm->mmap_sem); > lock(ashmem_mutex); > lock(&sb->s_type->i_mutex_key#9); > > *** DEADLOCK *** > > 1 lock held by syz-executor900/4483: > #0: 0000000025208078 (ashmem_mutex){+.+.}, at: > ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448 Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: NeilBrown <neilb@suse.com> Suggested-by: NeilBrown <neilb@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20fs/proc/kcore.c: fix invalid memory access in multi-page read optimizationDominique Martinet1-0/+1
The 'm' kcore_list item could point to kclist_head, and it is incorrect to look at m->addr / m->size in this case. There is no choice but to run through the list of entries for every address if we did not find any entry in the previous iteration Reset 'm' to NULL in that case at Omar Sandoval's suggestion. [akpm@linux-foundation.org: add comment] Link: http://lkml.kernel.org/r/1536100702-28706-1-git-send-email-asmadeus@codewreck.org Fixes: bf991c2231117 ("proc/kcore: optimize multiple page reads") Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Omar Sandoval <osandov@osandov.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: James Morse <james.morse@arm.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20mm: disable deferred struct page for 32-bit archesPasha Tatashin1-0/+1
Deferred struct page init is needed only on systems with large amount of physical memory to improve boot performance. 32-bit systems do not benefit from this feature. Jiri reported a problem where deferred struct pages do not work well with x86-32: [ 0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.036269] Initializing CPU#0 [ 0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0) [ 0.038459] page:f6780000 is uninitialized and poisoned [ 0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff [ 0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page)) [ 0.040038] ------------[ cut here ]------------ [ 0.040399] kernel BUG at include/linux/page-flags.h:293! [ 0.040823] invalid opcode: 0000 [#1] SMP PTI [ 0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9 [ 0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 0.042496] EIP: free_highmem_page+0x64/0x80 [ 0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71 [ 0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8 [ 0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc [ 0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086 [ 0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690 [ 0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.046913] DR6: fffe0ff0 DR7: 00000400 [ 0.047220] Call Trace: [ 0.047419] add_highpages_with_active_regions+0xbd/0x10d [ 0.047854] set_highmem_pages_init+0x5b/0x71 [ 0.048202] mem_init+0x2b/0x1e8 [ 0.048460] start_kernel+0x1d2/0x425 [ 0.048757] i386_start_kernel+0x93/0x97 [ 0.049073] startup_32_smp+0x164/0x168 [ 0.049379] Modules linked in: [ 0.049626] ---[ end trace 337949378db0abbb ]--- We free highmem pages before their struct pages are initialized: mem_init() set_highmem_pages_init() add_highpages_with_active_regions() free_highmem_page() .. Access uninitialized struct page here.. Because there is no reason to have this feature on 32-bit systems, just disable it. Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com Fixes: 2e3ca40f03bb ("mm: relax deferred struct page requirements") Signed-off-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reported-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20fork: report pid exhaustion correctlyKJ Tsanaktsidis1-1/+1
Make the clone and fork syscalls return EAGAIN when the limit on the number of pids /proc/sys/kernel/pid_max is exceeded. Currently, when the pid_max limit is exceeded, the kernel will return ENOSPC from the fork and clone syscalls. This is contrary to the documented behaviour, which explicitly calls out the pid_max case as one where EAGAIN should be returned. It also leads to really confusing error messages in userspace programs which will complain about a lack of disk space when they fail to create processes/threads for this reason. This error is being returned because alloc_pid() uses the idr api to find a new pid; when there are none available, idr_alloc_cyclic() returns -ENOSPC, and this is being propagated back to userspace. This behaviour has been broken before, and was explicitly fixed in commit 35f71bc0a09a ("fork: report pid reservation failure properly"), so I think -EAGAIN is definitely the right thing to return in this case. The current behaviour change dates from commit 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") and was I believe unintentional. This patch has no impact on the case where allocating a pid fails because the child reaper for the namespace is dead; that case will still return -ENOMEM. Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com Fixes: 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") Signed-off-by: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Gargi Sharma <gs051095@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20MAINTAINERS: Add X86 MM entryThomas Gleixner1-0/+9
Dave, Andy and Peter are de facto overseing the mm parts of X86. Add an explicit maintainers entry. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-09-20x86/intel_rdt: Add Reinette as co-maintainer for RDTFenghua Yu1-0/+1
Reinette Chatre is doing great job on enabling pseudo-locking and other features in RDT. Add her as co-maintainer for RDT. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc: "H Peter Anvin" <hpa@zytor.com> Cc: "Tony Luck" <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1537472228-221799-1-git-send-email-fenghua.yu@intel.com
2018-09-20Revert "ubifs: xattr: Don't operate on deleted inodes"Richard Weinberger1-24/+0
This reverts commit 11a6fc3dc743e22fb50f2196ec55bee5140d3c52. UBIFS wants to assert that xattr operations are only issued on files with positive link count. The said patch made this operations return -ENOENT for unlinked files such that the asserts will no longer trigger. This was wrong since xattr operations are perfectly fine on unlinked files. Instead the assertions need to be fixed/removed. Cc: <stable@vger.kernel.org> Fixes: 11a6fc3dc743 ("ubifs: xattr: Don't operate on deleted inodes") Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-09-20ubifs: drop false positive assertionSascha Hauer1-1/+3
The following sequence triggers ubifs_assert(c, c->lst.taken_empty_lebs > 0); at the end of ubifs_remount_fs(): mount -t ubifs /dev/ubi0_0 /mnt echo 1 > /sys/kernel/debug/ubifs/ubi0_0/ro_error umount /mnt mount -t ubifs -o ro /dev/ubix_y /mnt mount -o remount,ro /mnt The resulting UBIFS assert failed in ubifs_remount_fs at 1878 (pid 161) is a false positive. In the case above c->lst.taken_empty_lebs has never been changed from its initial zero value. This will only happen when the deferred recovery is done. Fix this by doing the assertion only when recovery has been done already. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-09-20ubifs: Check for name being NULL while mountingRichard Weinberger1-0/+3
The requested device name can be NULL or an empty string. Check for that and refuse to continue. UBIFS has to do this manually since we cannot use mount_bdev(), which checks for this condition. Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at>
2018-09-20KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLsLiran Alon1-8/+14
The handlers of IOCTLs in kvm_arch_vcpu_ioctl() are expected to set their return value in "r" local var and break out of switch block when they encounter some error. This is because vcpu_load() is called before the switch block which have a proper cleanup of vcpu_put() afterwards. However, KVM_{GET,SET}_NESTED_STATE IOCTLs handlers just return immediately on error without performing above mentioned cleanup. Thus, change these handlers to behave as expected. Fixes: 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Reviewed-by: Mark Kanda <mark.kanda@oracle.com> Reviewed-by: Patrick Colp <patrick.colp@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20drm/amdkfd: Fix ATS capablity was not reported correctly on some APUsYong Zhao3-6/+29
Because CRAT_CU_FLAGS_IOMMU_PRESENT was not set in some BIOS crat, we need to workaround this. For future compatibility, we also overwrite the bit in capability according to the value of needs_iommu_device. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9Yong Zhao5-5/+10
CWSR fails on Raven if the control stack is MTYPE_UC, which is used for regular GART mappings. As a workaround we map it using MTYPE_NC. The MEC firmware expects the control stack at one page offset from the start of the MQD so it is part of the MQD allocation on GFXv9. AMDGPU added a memory allocation flag just for this purpose. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7Amber Lin1-1/+1
A wrong register bit was examinated for checking SDMA status so it reports false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct bit. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20pinctrl: intel: Do pin translation in other GPIO operations as wellMika Westerberg1-48/+63
For some reason I thought GPIOLIB handles translation from GPIO ranges to pinctrl pins but it turns out not to be the case. This means that when GPIOs operations are performed for a pin controller having a custom GPIO base such as Cannon Lake and Ice Lake incorrect pin number gets used internally. Fix this in the same way we did for lock/unlock IRQ operations and translate the GPIO number to pin before using it. Fixes: a60eac3239f0 ("pinctrl: intel: Allow custom GPIO base for pad groups") Reported-by: Rajat Jain <rajatja@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Rajat Jain <rajatja@google.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctlAndy Whitcroft1-0/+3
The final field of a floppy_struct is the field "name", which is a pointer to a string in kernel memory. The kernel pointer should not be copied to user memory. The FDGETPRM ioctl copies a floppy_struct to user memory, including this "name" field. This pointer cannot be used by the user and it will leak a kernel address to user-space, which will reveal the location of kernel code and data and undermine KASLR protection. Model this code after the compat ioctl which copies the returned data to a previously cleared temporary structure on the stack (excluding the name pointer) and copy out to userspace from there. As we already have an inparam union with an appropriate member and that memory is already cleared even for read only calls make use of that as a temporary store. Based on an initial patch by Brian Belleville. CVE-2018-7755 Signed-off-by: Andy Whitcroft <apw@canonical.com> Broke up long line. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20libata: mask swap internal and hardware tagJens Axboe1-2/+12
hen we're comparing the hardware completion mask passed in from the driver with the internal tag pending mask, we need to account for the fact that the internal tag is different from the hardware tag. If not, then we can end up either prematurely completing the internal tag (since it's not set in the hw mask), or simply flag an error: ata2: illegal qc_active transition (100000000->00000001) If the internal tag is set, then swap that with the hardware tag in this case before comparing with what the hardware reports. Fixes: 28361c403683 ("libata: add extra internal command") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201151 Cc: stable@vger.kernel.org Reported-by: Paul Sbarra <sbarra.paul@gmail.com> Tested-by: Paul Sbarra <sbarra.paul@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20Compiler Attributes: naked can be sharedMiguel Ojeda2-8/+8
The naked attribute is supported by at least gcc >= 4.6 (for ARM, which is the only current user), gcc >= 8 (for x86), clang >= 3.1 and icc >= 13. See https://godbolt.org/z/350Dyc Therefore, move it out of compiler-gcc.h so that the definition is shared by all compilers. This also fixes Clang support for ARM32 --- 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive"). Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Eli Friedman <efriedma@codeaurora.org> Cc: Christopher Li <sparse@chrisli.org> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joe Perches <joe@perches.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-sparse@vger.kernel.org Suggested-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.