| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Power up the GPHY while we are bringing-up the network interface, and
conversely, upon bring down, power the GPHY down. In order to avoid
creating hardware hazards, make sure that the GPHY gets powered on
during bcmgenet_open() prior to the UniMAC being reset as the UniMAC may
start creating activity towards the GPHY if we reverse the steps.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the GPHY power down sequence by setting all power down bits, putting
the GPHY in reset, and finally cutting the 25Mhz reference clock.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We were missing a number of extra steps and delays to power-up the GPHY, update
the sequence to reflect the proper procedure here.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for implementing the power down GPHY sequence, rename
bcmgenet_ephy_power_up to illustrate that it is not EPHY specific but
PHY agnostic, and add an "enable" argument.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The CK25_DIS bit controls whether a 25Mhz clock is fed to the GPHY or
not, in preparation for powering down the integrated GPHY when relevant,
make sure we clear that bit.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If bcmgenet_power_down() fails, we would want to propagate a return
value from bcmgenet_wol_power_down_cfg() to know about this.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch reintroduces immediate rehash during insertion. If
we find during insertion that the table is full or the chain
length exceeds a set limit (currently 16 but may be disabled
with insecure_elasticity) then we will force an immediate rehash.
The rehash will contain an expansion if the table utilisation
exceeds 75%.
If this rehash fails then the insertion will fail. Otherwise the
insertion will be reattempted in the new hash table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the ability to allocate bucket table with GFP_ATOMIC
instead of GFP_KERNEL. This is needed when we perform an immediate
rehash during insertion.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the missing bits to allow multiple rehashes. The
read-side as well as remove already handle this correctly. So it's
only the rehasher and insertion that need modification to handle
this.
Note that this patch doesn't actually enable it so for now rehashing
is still only performed by the worker thread.
This patch also disables the explicit expand/shrink interface because
the table is meant to expand and shrink automatically, and continuing
to export these interfaces unnecessarily complicates the life of the
rehasher since the rehash process is now composed of two parts.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changes rhashtable_shrink to shrink to the smallest
size possible rather than halving the table. This is needed
because with multiple rehashing we will defer shrinking until
all other rehashing is done, meaning that when we do shrink
we may be able to shrink a lot.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes the explicit jhash value for the hashfn parameter
of rhashtable. The default is now jhash so removing the setting
makes no difference apart from making one less copy of jhash in
the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes the explicit jhash value for the hashfn parameter
of rhashtable. As the key length is a multiple of 4, this means that
we will actually end up using jhash2.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since every current rhashtable user uses jhash as their hash
function, the fact that jhash is an inline function causes each
user to generate a copy of its code.
This function provides a solution to this problem by allowing
hashfn to be unset. In which case rhashtable will automatically
set it to jhash. Furthermore, if the key length is a multiple
of 4, we will switch over to jhash2.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When rht_key_hashfn is called from rhashtable itself and params
is equal to ht->p, there is no point in checking params.key_len
and falling back to ht->p.key_len.
For some reason gcc couldn't figure out that params is the same
as ht->p. So let's help it by only checking params.key_len when
it's a constant.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The walker is a lockless reader so it too needs an smp_rmb before
reading the future_tbl field in order to see any new tables that
may contain elements that we should have walked over.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce TP_STATUS_CSUM_VALID tp_status flag to tell the
af_packet user that at least the transport header checksum
has been already validated.
For now, the flag may be set for incoming packets only.
Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is just an optimization. We don't need the value of status variable
if the packet is filtered.
Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Hugne reported following error :
I'm hitting this warning on latest net-next when i try to SSH into a machine
with eth0 added to a bridge (but i think the problem is older than that)
Steps to reproduce:
node2 ~ # brctl addif br0 eth0
[ 223.758785] device eth0 entered promiscuous mode
node2 ~ # ip link set br0 up
[ 244.503614] br0: port 1(eth0) entered forwarding state
[ 244.505108] br0: port 1(eth0) entered forwarding state
node2 ~ # [ 251.160159] ------------[ cut here ]------------
[ 251.160831] WARNING: CPU: 0 PID: 3 at include/net/request_sock.h:102 tcp_v4_err+0x6b1/0x720()
[ 251.162077] Modules linked in:
[ 251.162496] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc3+ #18
[ 251.163334] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 251.164078] ffffffff81a8365c ffff880038a6ba18 ffffffff8162ace4 0000000000009898
[ 251.165084] 0000000000000000 ffff880038a6ba58 ffffffff8104da85 ffff88003fa437c0
[ 251.166195] ffff88003fa437c0 ffff88003fa74e00 ffff88003fa43bb8 ffff88003fad99a0
[ 251.167203] Call Trace:
[ 251.167533] [<ffffffff8162ace4>] dump_stack+0x45/0x57
[ 251.168206] [<ffffffff8104da85>] warn_slowpath_common+0x85/0xc0
[ 251.169239] [<ffffffff8104db65>] warn_slowpath_null+0x15/0x20
[ 251.170271] [<ffffffff81559d51>] tcp_v4_err+0x6b1/0x720
[ 251.171408] [<ffffffff81630d03>] ? _raw_read_lock_irq+0x3/0x10
[ 251.172589] [<ffffffff81534e20>] ? inet_del_offload+0x40/0x40
[ 251.173366] [<ffffffff81569295>] icmp_socket_deliver+0x65/0xb0
[ 251.174134] [<ffffffff815693a2>] icmp_unreach+0xc2/0x280
[ 251.174820] [<ffffffff8156a82d>] icmp_rcv+0x2bd/0x3a0
[ 251.175473] [<ffffffff81534ea2>] ip_local_deliver_finish+0x82/0x1e0
[ 251.176282] [<ffffffff815354d8>] ip_local_deliver+0x88/0x90
[ 251.177004] [<ffffffff815350f0>] ip_rcv_finish+0xf0/0x310
[ 251.177693] [<ffffffff815357bc>] ip_rcv+0x2dc/0x390
[ 251.178336] [<ffffffff814f5da3>] __netif_receive_skb_core+0x713/0xa20
[ 251.179170] [<ffffffff814f7fca>] __netif_receive_skb+0x1a/0x80
[ 251.179922] [<ffffffff814f97d4>] process_backlog+0x94/0x120
[ 251.180639] [<ffffffff814f9612>] net_rx_action+0x1e2/0x310
[ 251.181356] [<ffffffff81051267>] __do_softirq+0xa7/0x290
[ 251.182046] [<ffffffff81051469>] run_ksoftirqd+0x19/0x30
[ 251.182726] [<ffffffff8106cc23>] smpboot_thread_fn+0x153/0x1d0
[ 251.183485] [<ffffffff8106cad0>] ? SyS_setgroups+0x130/0x130
[ 251.184228] [<ffffffff8106935e>] kthread+0xee/0x110
[ 251.184871] [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0
[ 251.185690] [<ffffffff81631108>] ret_from_fork+0x58/0x90
[ 251.186385] [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0
[ 251.187216] ---[ end trace c947fc7b24e42ea1 ]---
[ 259.542268] br0: port 1(eth0) entered forwarding state
Remove the double calls to reqsk_put()
[edumazet] :
I got confused because reqsk_timer_handler() _has_ to call
reqsk_put(req) after calling inet_csk_reqsk_queue_drop(), as
the timer handler holds a reference on req.
Signed-off-by: Fan Du <fan.du@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Erik Hugne <erik.hugne@ericsson.com>
Fixes: fa76ce7328b2 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dan Carpenter's static checker warned that in vxlan_stop we are checking
if 'vs' can be NULL while later we simply derreference it.
As after commit 56ef9c909b40 ("vxlan: Move socket initialization to
within rtnl scope") 'vs' just cannot be NULL in vxlan_stop() anymore, as
the interface won't go up if the socket initialization fails. So we are
good to just remove the check and make it consistent.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I updated the code to address a possible null pointer dereference in
resize I ended up reverting an exception handling fix for the suffix length
in the event that inflate or halve failed. This change is meant to correct
that by reverting the earlier fix and instead simply getting the parent
again after inflate has been completed to avoid the possible null pointer
issue.
Fixes: ddb4b9a13 ("fib_trie: Address possible NULL pointer dereference in resize")
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Always use software checksumming, since the hardware does not have any
checksum offload support.
This significantly improves local TCP tx performance.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This improves performance for routing and local rx
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The start-of-frame and end-of-frame bits were accidentally swapped.
In the current code it does not make any difference, since they are
always used together.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We implement the SO_SNDLOWAT etc not to be settable and return
ENOPROTOOPT per 1003.1g 7. Move the comment to appropriate
position and update the reference.
Signed-off-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dccp_v6_err() can restrict lookups to ehash table, and not to listeners.
Note this patch creates the infrastructure, but this means that ICMP
messages for request sockets are ignored until complete conversion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dccp_v4_err() can restrict lookups to ehash table, and not to listeners.
Note this patch creates the infrastructure, but this means that ICMP
messages for request sockets are ignored until complete conversion.
New dccp_req_err() helper is exported so that we can use it in IPv6
in following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_v6_err() can restrict lookups to ehash table, and not to listeners.
Note this patch creates the infrastructure, but this means that ICMP
messages for request sockets are ignored until complete conversion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_v4_err() can restrict lookups to ehash table, and not to listeners.
Note this patch creates the infrastructure, but this means that ICMP
messages for request sockets are ignored until complete conversion.
New tcp_req_err() helper is exported so that we can use it in IPv6
in following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a low hanging fruit, as we'll get rid of syn_wait_lock eventually.
We hold syn_wait_lock for such small sections, that it makes no sense to use
a read/write lock. A spin lock is simply faster.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
listener can be source of false sharing. request sock has some
useful information like : ireq->ir_iif, ireq->ir_num, ireq->ireq_net
This patch does not solve the major problem of having to read
sk->sk_protocol which is sharing a cache line with sk->sk_wmem_alloc.
(This same field is read later in ip_build_and_send_pkt())
One idea would be to move sk_protocol close to sk_family
(using 8 bits instead of 16 for sk_family seems enough)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not needed, and req->sk_listener points to the listener anyway.
request_sock argument can be const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cache listen_sock_qlen() to limit false sharing, and read
rskq_defer_accept once as it might change under us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Restructure the control structure of the modem response parser
to improve readability and error handling.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Separate CID detection from main parser loop.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Separate literal string handling from main parser loop.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Factor out queueing of modem response events into helper function
add_cid_event().
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
make it same as the netdev_switch_port_bridge_setlink/dellink
api (ie traverse lowerdevs to get to the switch port).
removes "WARN_ON(!ops->ndo_switch_parent_id_get)" because
direct bridge ports can be stacked netdevices (like bonds
and team of switch ports) which may not implement this ndo.
v2 to v3:
- remove changes to bond and team. Bring back the
transparently following lowerdevs like i initially
had for setlink/getlink
(http://www.spinics.net/lists/netdev/msg313436.html)
dave and scott feldman also seem to prefer it be that
way and move to non-transparent way of doing things
if we see a problem down the lane.
v3 to v4:
- fix ret initialization
v4 to v5:
- return err on first failure (scott feldman)
v5 to v6:
- change variable name (err) and initialize to
-EOPNOTSUPP (scott feldman).
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb->priority can be set for two purposes:
1) With respect to IP TOS field, which is computed by a mask.
Ususally used for priority qdisc's (pfifo, prio etc.), on TX
side (we only have ingress qdisc on RX side).
2) Used as a classid or flowid, works in the same way with tc
classid. What's more, this can even override the classid
of tc filters.
For case 1), it has been respected within its netns, I don't
see any point of keeping it for another netns, especially
when packets will be forwarded to Rx path (no matter from TX
path or RX path).
For case 2) we care, our applications run inside a netns,
and we classify the packets by our own filters outside,
If some application sets this priority, it could bypass
our filters, therefore clear it when moving out of a netns,
it makes no sense to bypass tc filters out of its netns.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The way the algif_skcipher works currently is that on sendmsg/sendpage it
builds an sgl for the input data and then on read/recvmsg it sends the job
for encryption putting the user to sleep till the data is processed.
This way it can only handle one job at a given time.
This patch changes it to be asynchronous by adding AIO support.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow to link af_alg sgls.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for async operations.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change __raw accesors to endian agnostic versions to allow the driver
to work properly on big endian systems.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The hnd field of the structs does not need to be __le32: the
device just returns the value without using it itself.
Signed-off-by: Thomas Körper <thomas.koerper@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add <ifname>-rxtx trigger, that will be activated both for tx
as rx events. This trigger mimics "activity" LED for Ethernet
devices.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch removes the return from the void function m_can_fifo_write().
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use can-dev's unregister_candev() instead of directly calling
networking unregister_netdev(). While both are functionally
equivalent, unregister_candev() might do extra stuff in the
future than just calling networking layer unregistration code.
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
It is identical to the can destructor.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Make sure IP6T_F_PROTO is set to enforce layer 4 protocol matching from
the ip6_tables core.
Suggested-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix a race condition and unnecessary locking:
* the root rb_node must only be accessed under the lock in nft_rbtree_lookup()
* the lock is not needed in lookup functions in netlink context
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
Florian Fainelli
Herbert Xu
Alexander Drozdov
Fan Du
Marcelo Ricardo Leitner
Alexander Duyck
Felix Fietkau
YOSHIFUJI Hideaki/吉藤英明
Eric Dumazet
Tilman Schmidt
Roopa Prabhu
WANG Cong
Tadeusz Struk
Ben Dooks
Thomas Körper
Yegor Yefremov
Marc Kleine-Budde
Ahmed S. Darwish
Florian Westphal
Pablo Neira Ayuso
Patrick McHardy