aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-01-27dt-bindings: net: xgmac_mdio: Add "clock-frequency" and "suppress-preamble"Tobias Waldekranz1-0/+19
The driver now supports the standard "clock-frequency" and "suppress-preamble" properties, do document them in the binding description. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net/fsl: xgmac_mdio: Support setting the MDC frequencyTobias Waldekranz1-1/+37
Support the standard "clock-frequency" attribute to set the generated MDC frequency. If not specified, the driver will leave the divisor bits untouched. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net/fsl: xgmac_mdio: Support preamble suppressionTobias Waldekranz1-0/+18
Support the standard "suppress-preamble" attribute to disable preamble generation. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net/fsl: xgmac_mdio: Use managed device resourcesTobias Waldekranz1-29/+6
All of the resources used by this driver has managed interfaces, so use them. Heed the warning in the comment before platform_get_resource and use a bare devm_ioremap to allow for non-exclusive access to the IO memory. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27dt-bindings: net: xgmac_mdio: Remove unsupported "bus-frequency"Tobias Waldekranz1-9/+0
This property has never been supported by the driver. The kernel has settled on "clock-frequency" as the standard name for this binding, so once that is supported we will document that instead. Fixes: 7f93c9d90f4d ("power/fsl: add MDIO dt binding for FMan") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27ipv4: Namespaceify min_adv_mss sysctl knobxu xin2-10/+12
Different netns has different requirement on the setting of min_adv_mss sysctl which the advertised MSS will be never lower than. Enable min_adv_mss to be configured per network namespace. Signed-off-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: mvneta: use .mac_select_pcs() interfaceRussell King (Oracle)1-2/+10
Convert mvneta to use the mac_select_interface rather than using phylink_set_pcs(). The intention here is to unify the approach for PCS and eventually remove phylink_set_pcs(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: mvneta: reorder initialisationRussell King (Oracle)1-52/+51
Re-order the mvneta initialisation to move devm based resources and easy setup earlier in the probe function. The primary reason for this is to allow us to switch the driver to use phylink's mac_select_pcs() callback. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: phy: at803x: Support downstream SFP cageRobert Hancock1-0/+56
Add support for downstream SFP cages for AR8031 and AR8033. This is primarily intended for fiber modules or direct-attach cables, however copper modules which work in 1000Base-X mode may also function. Such modules are allowed with a warning. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: phy: at803x: add fiber supportRobert Hancock1-9/+67
Previously this driver always forced the copper page to be selected, however for AR8031 in 100Base-FX or 1000Base-X modes, the fiber page needs to be selected. Set the appropriate mode based on the hardware mode_cfg strap selection. Enable the appropriate interrupt bits to detect fiber-side link up or down events. Update config_aneg and read_status methods to use the appropriate Clause 37 calls when fiber mode is in use. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: phy: at803x: move page selection fix to config_initRobert Hancock1-24/+16
The fix to select the copper page on AR8031 was being done in the probe function rather than config_init, so it would not be redone after resume from suspend. Move this to config_init so it is always redone when needed. Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26tcp: allocate tcp_death_row outside of struct netns_ipv4Eric Dumazet8-23/+37
I forgot tcp had per netns tracking of timewait sockets, and their sysctl to change the limit. After 0dad4087a86a ("tcp/dccp: get rid of inet_twsk_purge()"), whole struct net can be freed before last tw socket is freed. We need to allocate a separate struct inet_timewait_death_row object per netns. tw_count becomes a refcount and gains associated debugging infrastructure. BUG: KASAN: use-after-free in inet_twsk_kill+0x358/0x3c0 net/ipv4/inet_timewait_sock.c:46 Read of size 8 at addr ffff88807d5f9f40 by task kworker/1:7/3690 CPU: 1 PID: 3690 Comm: kworker/1:7 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events pwq_unbound_release_workfn Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 inet_twsk_kill+0x358/0x3c0 net/ipv4/inet_timewait_sock.c:46 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 expire_timers kernel/time/timer.c:1466 [inline] __run_timers.part.0+0x67c/0xa30 kernel/time/timer.c:1734 __run_timers kernel/time/timer.c:1715 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:lockdep_unregister_key+0x1c9/0x250 kernel/locking/lockdep.c:6328 Code: 00 00 00 48 89 ee e8 46 fd ff ff 4c 89 f7 e8 5e c9 ff ff e8 09 cc ff ff 9c 58 f6 c4 02 75 26 41 f7 c4 00 02 00 00 74 01 fb 5b <5d> 41 5c 41 5d 41 5e 41 5f e9 19 4a 08 00 0f 0b 5b 5d 41 5c 41 5d RSP: 0018:ffffc90004077cb8 EFLAGS: 00000206 RAX: 0000000000000046 RBX: ffff88807b61b498 RCX: 0000000000000001 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888077027128 R08: 0000000000000001 R09: ffffffff8f1ea4fc R10: fffffbfff1ff93ee R11: 000000000000af1e R12: 0000000000000246 R13: 0000000000000000 R14: ffffffff8ffc89b8 R15: ffffffff90157fb0 wq_unregister_lockdep kernel/workqueue.c:3508 [inline] pwq_unbound_release_workfn+0x254/0x340 kernel/workqueue.c:3746 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Allocated by task 3635: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:260 [inline] slab_post_alloc_hook mm/slab.h:732 [inline] slab_alloc_node mm/slub.c:3230 [inline] slab_alloc mm/slub.c:3238 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3243 kmem_cache_zalloc include/linux/slab.h:705 [inline] net_alloc net/core/net_namespace.c:407 [inline] copy_net_ns+0x125/0x760 net/core/net_namespace.c:462 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3048 __do_sys_unshare kernel/fork.c:3119 [inline] __se_sys_unshare kernel/fork.c:3117 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3117 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88807d5f9a80 which belongs to the cache net_namespace of size 6528 The buggy address is located 1216 bytes inside of 6528-byte region [ffff88807d5f9a80, ffff88807d5fb400) The buggy address belongs to the page: page:ffffea0001f57e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88807d5f9a80 pfn:0x7d5f8 head:ffffea0001f57e00 order:3 compound_mapcount:0 compound_pincount:0 memcg:ffff888070023001 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 ffff888010dd4f48 ffffea0001404e08 ffff8880118fd000 raw: ffff88807d5f9a80 0000000000040002 00000001ffffffff ffff888070023001 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3634, ts 119694798460, free_ts 119693556950 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271 alloc_slab_page mm/slub.c:1799 [inline] allocate_slab mm/slub.c:1944 [inline] new_slab+0x28a/0x3b0 mm/slub.c:2004 ___slab_alloc+0x87c/0xe90 mm/slub.c:3018 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105 slab_alloc_node mm/slub.c:3196 [inline] slab_alloc mm/slub.c:3238 [inline] kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3243 kmem_cache_zalloc include/linux/slab.h:705 [inline] net_alloc net/core/net_namespace.c:407 [inline] copy_net_ns+0x125/0x760 net/core/net_namespace.c:462 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3048 __do_sys_unshare kernel/fork.c:3119 [inline] __se_sys_unshare kernel/fork.c:3117 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3117 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1352 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404 free_unref_page_prepare mm/page_alloc.c:3325 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3404 skb_free_head net/core/skbuff.c:655 [inline] skb_release_data+0x65d/0x790 net/core/skbuff.c:677 skb_release_all net/core/skbuff.c:742 [inline] __kfree_skb net/core/skbuff.c:756 [inline] consume_skb net/core/skbuff.c:914 [inline] consume_skb+0xc2/0x160 net/core/skbuff.c:908 skb_free_datagram+0x1b/0x1f0 net/core/datagram.c:325 netlink_recvmsg+0x636/0xea0 net/netlink/af_netlink.c:1998 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Memory state around the buggy address: ffff88807d5f9e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807d5f9e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88807d5f9f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807d5f9f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807d5fa000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0dad4087a86a ("tcp/dccp: get rid of inet_twsk_purge()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220126180714.845362-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-26nfp: only use kdoc style comments for kdocSimon Horman3-59/+28
Update comments to only use kdoc style comments, starting with '/**', for kdoc. Flagged by ./scripts/kernel-doc Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220126090803.5582-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-26net: ethernet: cortina: permit to set mac address in DTCorentin Labbe1-0/+8
Add ability of setting mac address in DT for cortina ethernet driver. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220125210811.54350-1-clabbe@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-26nfp: flower: Use struct_size() helper in kmalloc()Gustavo A. R. Silva1-1/+1
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c:359:25: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: spectrum_kvdl: Use struct_size() helper in kzalloc()Gustavo A. R. Silva1-3/+2
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum1_kvdl.c:229:24: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: enetc: use .mac_select_pcs() interfaceRussell King (Oracle)1-5/+9
Convert the PCS selection to use mac_select_pcs, which allows the PCS to perform any validation it needs. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: dpaa2-mac: use .mac_select_pcs() interfaceRussell King (Oracle)1-3/+9
Convert dpaa2-mac to use the mac_select_pcs() interface rather than using phylink_set_pcs(). The intention here is to unify the approach for PCS and eventually to remove phylink_set_pcs(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: axienet: replace mdiobus_write() with mdiodev_write()Russell King (Oracle)1-2/+1
Commit 0ebecb2644c8 ("net: mdio: Add helper functions for accessing MDIO devices") added support for mdiodev accessor operations that neatly wrap the mdiobus accessor operations. Since we are dealing with a mdio device here, update the driver to use mdiodev_write(). Tested-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: axienet: convert to phylink_pcsRussell King (Oracle)2-54/+55
Convert axienet to use the phylink_pcs layer, resulting in it no longer being a legacy driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: Handle async event when the PHC is updated in RTC modePavan Chebbi1-0/+29
In Multi-host environment, when the PHC is updated by one host, an async message from firmware will be sent to other hosts. Re-initialize the timecounter when the driver receives this async message. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: Implement .adjtime() for PTP RTC modePavan Chebbi2-0/+37
The adjusted time is set in the PHC in RTC mode. We also need to update the snapshots ptp->current_time and ptp->old_time when the time is adjusted. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: Add driver support to use Real Time Counter for PTPPavan Chebbi4-6/+79
Add support for RTC mode if it is supported by firmware. In RTC mode, the PHC is set to the 64-bit clock. Because the legacy interface is 48-bit, the driver still has to keep track of the upper 16 bits and handle the rollover. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: PTP: Refactor PTP initialization functionsPavan Chebbi1-14/+31
Making the ptp free and timecounter initialization code into separate functions so that later patches can use them. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: Update firmware interface to 1.10.2.73Michael Chan1-39/+460
The main changes are PTP support for RTC, additional NVM error codes, backing store v2 firmware APIs. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: stmmac: use .mac_select_pcs() interfaceRussell King (Oracle)1-3/+12
Convert stmmac to use the mac_select_pcs() interface rather than using phylink_set_pcs(). The intention here is to unify the approach for PCS and eventually to remove phylink_set_pcs(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: stmmac: convert to phylink_generic_validate()Russell King (Oracle)1-24/+1
Convert stmmac to use phylink_generic_validate() now that we have the MAC capabilities and supported interfaces filled in, and we have the PCS validation handled via the PCS operations. Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: stmmac: remove phylink_config.pcs_poll usageRussell King (Oracle)1-1/+0
Phylink will use PCS polling whenever the PCS's poll member is set, so setting phylink_config.pcs_poll as well is redundant. Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: stmmac/xpcs: convert to pcs_validate()Russell King (Oracle)3-23/+11
stmmac explicitly calls the xpcs driver to validate the ethtool linkmodes. This is no longer necessary as phylink now supports validation through a PCS method. Convert both drivers to use this new mechanism. Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: stmmac: fill in supported_interfacesRussell King (Oracle)1-0/+8
Fill in phylink's supported_interfaces bitmap with the PHY interface modes which can be used to talk to the PHY. We indicate that the PHY interface mode passed in platform data is always supported, as this is the initial mode passed into phylink. When there is no PCS specified, we assume that this is the only mode that is supported - indeed, the driver appears not to support dynamic switching of interface types at present. When a xpcs is present, it defines the PHY interface modes that the stmmac driver can support. Request the supported interfaces from the xpcs driver, and pass them to phylink. Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: stmmac: convert to phylink_get_linkmodes()Russell King (Oracle)1-83/+42
Add the MAC speed, duplex and pause capabilities to the phylink_config structure, and switch stmmac_validate() to use phylink_get_linkmodes() to generate the mask of supported ethtool link modes. Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: xpcs: add support for retrieving supported interface modesRussell King (Oracle)2-0/+15
Add a function to the xpcs driver to retrieve the supported PHY interface modes, which can be used by drivers to fill in phylink's supported_interfaces mask. We validate the interface bit index to ensure that it fits within the bitmap as xpcs lists PHY_INTERFACE_MODE_MAX in an entry. Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: core_env: Forbid module reset on RJ45 portsDanielle Ratson1-0/+6
Transceiver module reset through 'rst' field in PMAOS register is not supported on RJ45 ports, so module reset should be rejected. Therefore, before trying to access this field, validate the port module type that was queried during initialization and return an error to user space in case the port module type is RJ45 (twisted pair). Output example: # ethtool --reset swp11 phy ETHTOOL_RESET 0x40 Cannot issue ETHTOOL_RESET: Invalid argument $ dmesg mlxsw_spectrum 0000:03:00.0 swp11: Reset module is not supported on port module type Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: core_env: Forbid power mode set and get on RJ45 portsDanielle Ratson1-0/+13
PMMP (Port Module Memory Map Properties) and MCION (Management Cable IO and Notifications) registers are not supported on RJ45 ports, so setting and getting power mode should be rejected. Therefore, before trying to access those registers, validate the port module type that was queried during initialization and return an error to user space in case the port module type is RJ45 (twisted pair). Set output example: # ethtool --set-module swp1 power-mode-policy auto netlink error: mlxsw_core: Power mode is not supported on port module type netlink error: Invalid argument Get output example: $ ethtool --show-module swp11 netlink error: mlxsw_core: Power mode is not supported on port module type netlink error: Invalid argument Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: core_env: Forbid getting module EEPROM on RJ45 portsDanielle Ratson1-3/+49
MCIA (Management Cable Info Access) register is not supported on RJ45 ports, so getting module EEPROM should be rejected. Therefore, before trying to access this register, validate the port module type that was queried during initialization and return an error to user space in case the port module type is RJ45 (twisted pair). Examples for output when trying to get EEPROM module: Using netlink: # ethtool -m swp1 netlink error: mlxsw_core: EEPROM is not equipped on port module type netlink error: Invalid argument Using IOCTL: # ethtool -m swp1 Cannot get module EEPROM information: Invalid argument $ dmesg mlxsw_spectrum 0000:03:00.0 swp1: EEPROM is not equipped on port module type Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: core_env: Query and store port module's type during initializationDanielle Ratson1-0/+28
Query and store port module's type during initialization so that it could be later used to determine if certain configurations are allowed based on the type. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: reg: Add Port Module Type Mapping registerDanielle Ratson1-0/+53
Add the Port Module Type Mapping (PMTP) register. It will be used by subsequent patches to query port module types and forbid certain configurations based on the port module's type. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: spectrum_ethtool: Add support for two new link modesDanielle Ratson2-0/+12
As part of a process for supporting a new system with RJ45 connectors, 100BaseT and 1000BaseT link modes need to be supported. Add support for these two link modes by adding the two corresponding bits in PTYS (Port Type and Speed) register. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: Add netdev argument to mlxsw_env_get_module_info()Danielle Ratson4-4/+7
The next patches will forbid querying the port module's EEPROM info when its type is RJ45 as in this case no transceiver module can ever be connected to the port. Add netdev argument to mlxsw_env_get_module_info() so it could be used to print an error to the kernel log via netdev_err(). Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: core_env: Do not pass number of modules as argumentIdo Schimmel1-9/+6
The number of modules can be resolved from the first argument, so do not pass it. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: spectrum_ethtool: Remove redundant variableIdo Schimmel1-12/+6
Remove the 'err' variable and simply return. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25net: Adjust sk_gso_max_size once when setDavid Ahern3-3/+3
sk_gso_max_size is set based on the dst dev. Both users of it adjust the value by the same offset - (MAX_TCP_HEADER + 1). Rather than compute the same adjusted value on each call do the adjustment once when set. Signed-off-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220125024511.27480-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-25net: tulip: remove redundant assignment to variable new_csr6Colin Ian King1-1/+1
Variable new_csr6 is being initialized with a value that is never read, it is being re-assigned later on. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220123183440.112495-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-25ipv6: gro: flush instead of assuming different flows on hop_limit mismatchJakub Kicinski1-2/+3
IPv6 GRO considers packets to belong to different flows when their hop_limit is different. This seems counter-intuitive, the flow is the same. hop_limit may vary because of various bugs or hacks but that doesn't mean it's okay for GRO to reorder packets. Practical impact of this problem on overall TCP performance is unclear, but TCP itself detects this reordering and bumps TCPSACKReorder resulting in user complaints. Eric warns that there may be performance regressions in setups which do packet spraying across links with similar RTT but different hop count. To be safe let's target -next and not treat this as a fix. If the packet spraying is using flow label there should be no difference in behavior as flow label is checked first. Note that the code plays an easy to miss trick by upcasting next_hdr to a u16 pointer and compares next_hdr and hop_limit in one go. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25net: mana: Use struct_size() helper in mana_gd_create_dma_region()Gustavo A. R. Silva1-2/+2
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/net/ethernet/microsoft/mana/gdma_main.c:677:24: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25r8169: use new PM macrosHeiner Kallweit1-12/+6
This is based on series [0] that extended the PM core. Now the compiler can see the PM callbacks also on systems not defining CONFIG_PM. The optimizer will remove the functions then in this case. [0] https://lore.kernel.org/netdev/20211207002102.26414-1-paul@crapouillou.net/ Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25net: dsa: Avoid cross-chip syncing of VLAN filteringTobias Waldekranz1-3/+5
Changes to VLAN filtering are not applicable to cross-chip notifications. On a system like this: .-----. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-' '-1-2-' '-1-2-' Before this change, upon sw1p1 leaving a bridge, a call to dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. In this scenario: .---------. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-3-4-' '-1-2-' '-1-2-' When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be called for sw2 and sw3 with a non-existing port - leading to array out-of-bounds accesses and crashes on mv88e6xxx. Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25net: dsa: Move VLAN filtering syncing out of dsa_switch_bridge_leaveTobias Waldekranz1-13/+25
Most of dsa_switch_bridge_leave was, in fact, dealing with the syncing of VLAN filtering for switches on which that is a global setting. Separate the two phases to prepare for the cross-chip related bugfix in the following commit. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25ipv4/tcp: do not use per netns ctl socketsEric Dumazet2-35/+27
TCP ipv4 uses per-cpu/per-netns ctl sockets in order to send RST and some ACK packets (on behalf of TIMEWAIT sockets). This adds memory and cpu costs, which do not seem needed. Now typical servers have 256 or more cores, this adds considerable tax to netns users. tcp sockets are used from BH context, are not receiving packets, and do not store any persistent state but the 'struct net' pointer in order to be able to use IPv4 output functions. Note that I attempted a related change in the past, that had to be hot-fixed in commit bdbbb8527b6f ("ipv4: tcp: get rid of ugly unicast_sock") This patch could very well surface old bugs, on layers not taking care of sk->sk_kern_sock properly. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25ipv6: do not use per netns icmp socketsEric Dumazet2-53/+10
Back in linux-2.6.25 (commit 98c6d1b261e7 "[NETNS]: Make icmpv6_sk per namespace.", we added private per-cpu/per-netns ipv6 icmp sockets. This adds memory and cpu costs, which do not seem needed. Now typical servers have 256 or more cores, this adds considerable tax to netns users. icmp sockets are used from BH context, are not receiving packets, and do not store any persistent state but the 'struct net' pointer. icmpv6_xmit_lock() already makes sure to lock the chosen per-cpu socket. This patch has a considerable impact on the number of netns that the worker thread in cleanup_net() can dismantle per second, because ip6mr_sk_done() is no longer called, meaning we no longer acquire the rtnl mutex, competing with other threads adding new netns. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.