aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-01ARCv2: entry: push out the Z flag unclobber from common EXCEPTION_PROLOGUEVineet Gupta2-8/+11
Upon a taken interrupt/exception from User mode, HS hardware auto sets Z flag. This helps shave a few instructions from EXCEPTION_PROLOGUE by eliding re-reading ERSTATUS and some bit fiddling. However TLB Miss Exception handler can clobber the CPU flags and still end up in EXCEPTION_PROLOGUE in the slow path handling TLB handling case: EV_TLBMissD do_slow_path_pf EV_TLBProtV (aliased to call_do_page_fault) EXCEPTION_PROLOGUE As a result, EXCEPTION_PROLOGUE need to "unclobber" the Z flag which this patch changes. It is now pushed out to TLB Miss Exception handler. The reasons beings: - The flag restoration is only needed for slowpath TLB Miss Exception handling, but currently being in EXCEPTION_PROLOGUE penalizes all exceptions such as ProtV and syscall Trap, where Z flag is already as expected. - Pushing unclobber out to where it was clobbered is much cleaner and also serves to document the fact. - Makes EXCEPTION_PROLGUE similar to INTERRUPT_PROLOGUE so easier to refactor the common parts which is what this series aims to do Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01ARCv2: entry: comments about hardware auto-save on taken interruptsVineet Gupta1-16/+62
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01ARC: mm: do_page_fault refactor #8: release mmap_sem soonerVineet Gupta1-4/+3
In case of successful page fault handling, this patch releases mmap_sem before updating the perf stat event for major/minor faults. So even though the contention reduction is NOT super high, it is still an improvement. There's an additional code size improvement as we only have 2 up_read() calls now. Note to myself: -------------- 1. Given the way it is done, we are forced to move @bad_area label earlier causing the various "goto bad_area" cases to hit perf stat code. - PERF_COUNT_SW_PAGE_FAULTS is NOW updated for access errors which is what arm/arm64 seem to be doing as well (with slightly different code) - PERF_COUNT_SW_PAGE_FAULTS_{MAJ,MIN} must NOT be updated for the error case which is guarded by now setting @fault initial value to VM_FAULT_ERROR which serves both cases when handle_mm_fault() returns error or is not called at all. 2. arm/arm64 use two homebrew fault flags VM_FAULT_BAD{MAP,MAPACCESS} which I was inclined to add too but seems not needed for ARC - given that we have everything is 1 function we can still use goto - we setup si_code at the right place (arm* do that in the end) - we init fault already to error value which guards entry into perf stats event update Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01ARC: mm: do_page_fault refactor #7: fold the various error handlingVineet Gupta1-34/+14
- single up_read() call vs. 4 - so much easier on eyes Technically it seems like @bad_area label moved up, but even in old regime, it was a special case of delivering SIGSEGV unconditionally which we now do as well, although with checks. Also note that @fault needs to be initialized since we can land in @bad_area (which reads it) without setting it up with return value of handle_mm_fault() - failing to do so did bite us although as a side effect of different patch: see [1] [1]: http://lists.infradead.org/pipermail/linux-snps-arc/2019-May/005803.html Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01ARC: mm: do_page_fault refactor #6: error handlers to use same patternVineet Gupta1-11/+10
- up_read - if !user_mode - whatever error handling Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01ARC: mm: do_page_fault refactor #5: scoot no_context to endVineet Gupta1-14/+7
This is different than the rest of signal handling stuff No functional change Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01ARC: mm: do_page_fault refactor #4: consolidate retry related logicVineet Gupta1-29/+31
stats update code can now elide "retry" check and additional level of indentation since all retry handling is done ahead of it already Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01ARC: mm: do_page_fault refactor #3: tidyup vma access permission codeVineet Gupta1-18/+21
The coding pattern to NOT intialize variables at declaration time but rather near code which makes us eof them makes it much easier to grok the overall logic, specially when the init is not simply 0 or 1 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01ARC: mm: do_page_fault refactor #2: remove short lived variableVineet Gupta1-6/+1
Compiler will do this anyways, still.. No functional change. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01ARC: mm: do_page_fault refactor #1: remove label @good_areaVineet Gupta1-7/+5
Invert the condition for stack expansion. No functional change Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-06-30Linux 5.2-rc7Linus Torvalds1-2/+2
2019-06-29linux/kernel.h: fix overflow for DIV_ROUND_UP_ULLVinod Koul1-1/+2
DIV_ROUND_UP_ULL adds the two arguments and then invokes DIV_ROUND_DOWN_ULL. But on a 32bit system the addition of two 32 bit values can overflow. DIV_ROUND_DOWN_ULL does it correctly and stashes the addition into a unsigned long long so cast the result to unsigned long long here to avoid the overflow condition. [akpm@linux-foundation.org: DIV_ROUND_UP_ULL must be an rval] Link: http://lkml.kernel.org/r/20190625100518.30753-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29mm, swap: fix THP swap outHuang Ying1-5/+2
0-Day test system reported some OOM regressions for several THP (Transparent Huge Page) swap test cases. These regressions are bisected to 6861428921b5 ("block: always define BIO_MAX_PAGES as 256"). In the commit, BIO_MAX_PAGES is set to 256 even when THP swap is enabled. So the bio_alloc(gfp_flags, 512) in get_swap_bio() may fail when swapping out THP. That causes the OOM. As in the patch description of 6861428921b5 ("block: always define BIO_MAX_PAGES as 256"), THP swap should use multi-page bvec to write THP to swap space. So the issue is fixed via doing that in get_swap_bio(). BTW: I remember I have checked the THP swap code when 6861428921b5 ("block: always define BIO_MAX_PAGES as 256") was merged, and thought the THP swap code needn't to be changed. But apparently, I was wrong. I should have done this at that time. Link: http://lkml.kernel.org/r/20190624075515.31040-1-ying.huang@intel.com Fixes: 6861428921b5 ("block: always define BIO_MAX_PAGES as 256") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29fork,memcg: alloc_thread_stack_node needs to set tsk->stackAndrea Arcangeli1-1/+5
Commit 5eed6f1dff87 ("fork,memcg: fix crash in free_thread_stack on memcg charge fail") corrected two instances, but there was a third instance of this bug. Without setting tsk->stack, if memcg_charge_kernel_stack fails, it'll execute free_thread_stack() on a dangling pointer. Enterprise kernels are compiled with VMAP_STACK=y so this isn't critical, but custom VMAP_STACK=n builds should have some performance advantage, with the drawback of risking to fail fork because compaction didn't succeed. So as long as VMAP_STACK=n is a supported option it's worth fixing it upstream. Link: http://lkml.kernel.org/r/20190619011450.28048-1-aarcange@redhat.com Fixes: 9b6f7e163cd0 ("mm: rework memcg kernel stack accounting") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29MAINTAINERS: add CLANG/LLVM BUILD SUPPORT infoNick Desaulniers1-0/+8
Add keyword support so that our mailing list gets cc'ed for clang/llvm patches. We're pretty active on our mailing list so far as code review. There are numerous Googlers like myself that are paid to support building the Linux kernel with Clang and LLVM. Link: http://lkml.kernel.org/r/20190620001907.255803-1-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29mm/vmalloc.c: avoid bogus -Wmaybe-uninitialized warningArnd Bergmann1-2/+2
gcc gets confused in pcpu_get_vm_areas() because there are too many branches that affect whether 'lva' was initialized before it gets used: mm/vmalloc.c: In function 'pcpu_get_vm_areas': mm/vmalloc.c:991:4: error: 'lva' may be used uninitialized in this function [-Werror=maybe-uninitialized] insert_vmap_area_augment(lva, &va->rb_node, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ &free_vmap_area_root, &free_vmap_area_list); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mm/vmalloc.c:916:20: note: 'lva' was declared here struct vmap_area *lva; ^~~ Add an intialization to NULL, and check whether this has changed before the first use. [akpm@linux-foundation.org: tweak comments] Link: http://lkml.kernel.org/r/20190618092650.2943749-1-arnd@arndb.de Fixes: 68ad4a330433 ("mm/vmalloc.c: keep track of free blocks for vmap allocation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Joel Fernandes <joelaf@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29mm/page_idle.c: fix oops because end_pfn is larger than max_pfnColin Ian King1-2/+2
Currently the calcuation of end_pfn can round up the pfn number to more than the actual maximum number of pfns, causing an Oops. Fix this by ensuring end_pfn is never more than max_pfn. This can be easily triggered when on systems where the end_pfn gets rounded up to more than max_pfn using the idle-page stress-ng stress test: sudo stress-ng --idle-page 0 BUG: unable to handle kernel paging request at 00000000000020d8 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 11039 Comm: stress-ng-idle- Not tainted 5.0.0-5-generic #6-Ubuntu Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:page_idle_get_page+0xc8/0x1a0 Code: 0f b1 0a 75 7d 48 8b 03 48 89 c2 48 c1 e8 33 83 e0 07 48 c1 ea 36 48 8d 0c 40 4c 8d 24 88 49 c1 e4 07 4c 03 24 d5 00 89 c3 be <49> 8b 44 24 58 48 8d b8 80 a1 02 00 e8 07 d5 77 00 48 8b 53 08 48 RSP: 0018:ffffafd7c672fde8 EFLAGS: 00010202 RAX: 0000000000000005 RBX: ffffe36341fff700 RCX: 000000000000000f RDX: 0000000000000284 RSI: 0000000000000275 RDI: 0000000001fff700 RBP: ffffafd7c672fe00 R08: ffffa0bc34056410 R09: 0000000000000276 R10: ffffa0bc754e9b40 R11: ffffa0bc330f6400 R12: 0000000000002080 R13: ffffe36341fff700 R14: 0000000000080000 R15: ffffa0bc330f6400 FS: 00007f0ec1ea5740(0000) GS:ffffa0bc7db00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000020d8 CR3: 0000000077d68000 CR4: 00000000000006e0 Call Trace: page_idle_bitmap_write+0x8c/0x140 sysfs_kf_bin_write+0x5c/0x70 kernfs_fop_write+0x12e/0x1b0 __vfs_write+0x1b/0x40 vfs_write+0xab/0x1b0 ksys_write+0x55/0xc0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: http://lkml.kernel.org/r/20190618124352.28307-1-colin.king@canonical.com Fixes: 33c3fc71c8cf ("mm: introduce idle page tracking") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29initramfs: fix populate_initrd_image() section mismatchGeert Uytterhoeven1-2/+2
With gcc-4.6.3: WARNING: vmlinux.o(.text.unlikely+0x140): Section mismatch in reference from the function populate_initrd_image() to the variable .init.ramfs.info:__initramfs_size The function populate_initrd_image() references the variable __init __initramfs_size. This is often because populate_initrd_image lacks a __init annotation or the annotation of __initramfs_size is wrong. WARNING: vmlinux.o(.text.unlikely+0x14c): Section mismatch in reference from the function populate_initrd_image() to the function .init.text:unpack_to_rootfs() The function populate_initrd_image() references the function __init unpack_to_rootfs(). This is often because populate_initrd_image lacks a __init annotation or the annotation of unpack_to_rootfs is wrong. WARNING: vmlinux.o(.text.unlikely+0x198): Section mismatch in reference from the function populate_initrd_image() to the function .init.text:xwrite() The function populate_initrd_image() references the function __init xwrite(). This is often because populate_initrd_image lacks a __init annotation or the annotation of xwrite is wrong. Indeed, if the compiler decides not to inline populate_initrd_image(), a warning is generated. Fix this by adding the missing __init annotations. Link: http://lkml.kernel.org/r/20190617074340.12779-1-geert@linux-m68k.org Fixes: 7c184ecd262fe64f ("initramfs: factor out a helper to populate the initrd image") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29mm/oom_kill.c: fix uninitialized oc->constraintYafang Shao1-7/+5
In dump_oom_summary() oc->constraint is used to show oom_constraint_text, but it hasn't been set before. So the value of it is always the default value 0. We should inititialize it before. Bellow is the output when memcg oom occurs, before this patch: oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=7997,uid=0 after this patch: oom-kill:constraint=CONSTRAINT_MEMCG,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=13681,uid=0 Link: http://lkml.kernel.org/r/1560522038-15879-1-git-send-email-laoar.shao@gmail.com Fixes: ef8444ea01d7 ("mm, oom: reorganize the oom report in dump_header") Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Wind Yu <yuzhoujian@didichuxing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHugeNaoya Horiguchi2-13/+21
madvise(MADV_SOFT_OFFLINE) often returns -EBUSY when calling soft offline for hugepages with overcommitting enabled. That was caused by the suboptimal code in current soft-offline code. See the following part: ret = migrate_pages(&pagelist, new_page, NULL, MPOL_MF_MOVE_ALL, MIGRATE_SYNC, MR_MEMORY_FAILURE); if (ret) { ... } else { /* * We set PG_hwpoison only when the migration source hugepage * was successfully dissolved, because otherwise hwpoisoned * hugepage remains on free hugepage list, then userspace will * find it as SIGBUS by allocation failure. That's not expected * in soft-offlining. */ ret = dissolve_free_huge_page(page); if (!ret) { if (set_hwpoison_free_buddy_page(page)) num_poisoned_pages_inc(); } } return ret; Here dissolve_free_huge_page() returns -EBUSY if the migration source page was freed into buddy in migrate_pages(), but even in that case we actually has a chance that set_hwpoison_free_buddy_page() succeeds. So that means current code gives up offlining too early now. dissolve_free_huge_page() checks that a given hugepage is suitable for dissolving, where we should return success for !PageHuge() case because the given hugepage is considered as already dissolved. This change also affects other callers of dissolve_free_huge_page(), which are cleaned up together. [n-horiguchi@ah.jp.nec.com: v3] Link: http://lkml.kernel.org/r/1560761476-4651-3-git-send-email-n-horiguchi@ah.jp.nec.comLink: http://lkml.kernel.org/r/1560154686-18497-3-git-send-email-n-horiguchi@ah.jp.nec.com Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining") Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Chen, Jerry T <jerry.t.chen@intel.com> Tested-by: Chen, Jerry T <jerry.t.chen@intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com> Cc: "Chen, Jerry T" <jerry.t.chen@intel.com> Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29mm: soft-offline: return -EBUSY if set_hwpoison_free_buddy_page() failsNaoya Horiguchi1-0/+2
The pass/fail of soft offline should be judged by checking whether the raw error page was finally contained or not (i.e. the result of set_hwpoison_free_buddy_page()), but current code do not work like that. It might lead us to misjudge the test result when set_hwpoison_free_buddy_page() fails. Without this fix, there are cases where madvise(MADV_SOFT_OFFLINE) may not offline the original page and will not return an error. Link: http://lkml.kernel.org/r/1560154686-18497-2-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining") Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com> Cc: "Chen, Jerry T" <jerry.t.chen@intel.com> Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29signal: remove the wrong signal_pending() check in restore_user_sigmask()Oleg Nesterov6-28/+36
This is the minimal fix for stable, I'll send cleanups later. Commit 854a6ed56839 ("signal: Add restore_user_sigmask()") introduced the visible change which breaks user-space: a signal temporary unblocked by set_user_sigmask() can be delivered even if the caller returns success or timeout. Change restore_user_sigmask() to accept the additional "interrupted" argument which should be used instead of signal_pending() check, and update the callers. Eric said: : For clarity. I don't think this is required by posix, or fundamentally to : remove the races in select. It is what linux has always done and we have : applications who care so I agree this fix is needed. : : Further in any case where the semantic change that this patch rolls back : (aka where allowing a signal to be delivered and the select like call to : complete) would be advantage we can do as well if not better by using : signalfd. : : Michael is there any chance we can get this guarantee of the linux : implementation of pselect and friends clearly documented. The guarantee : that if the system call completes successfully we are guaranteed that no : signal that is unblocked by using sigmask will be delivered? Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com Fixes: 854a6ed56839a40f6b5d02a2962f48841482eec4 ("signal: Add restore_user_sigmask()") Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Eric Wong <e@80x24.org> Tested-by: Eric Wong <e@80x24.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Laight <David.Laight@ACULAB.COM> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29fs/binfmt_flat.c: make load_flat_shared_library() workJann Horn1-16/+7
load_flat_shared_library() is broken: It only calls load_flat_file() if prepare_binprm() returns zero, but prepare_binprm() returns the number of bytes read - so this only happens if the file is empty. Instead, call into load_flat_file() if the number of bytes read is non-negative. (Even if the number of bytes is zero - in that case, load_flat_file() will see nullbytes and return a nice -ENOEXEC.) In addition, remove the code related to bprm creds and stop using prepare_binprm() - this code is loading a library, not a main executable, and it only actually uses the members "buf", "file" and "filename" of the linux_binprm struct. Instead, call kernel_read() directly. Link: http://lkml.kernel.org/r/20190524201817.16509-1-jannh@google.com Fixes: 287980e49ffc ("remove lots of IS_ERR_VALUE abuses") Signed-off-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29mm/mempolicy.c: fix an incorrect rebind node in mpol_rebind_nodemaskzhong jiang1-1/+1
mpol_rebind_nodemask() is called for MPOL_BIND and MPOL_INTERLEAVE mempoclicies when the tasks's cpuset's mems_allowed changes. For policies created without MPOL_F_STATIC_NODES or MPOL_F_RELATIVE_NODES, it works by remapping the policy's allowed nodes (stored in v.nodes) using the previous value of mems_allowed (stored in w.cpuset_mems_allowed) as the domain of map and the new mems_allowed (passed as nodes) as the range of the map (see the comment of bitmap_remap() for details). The result of remapping is stored back as policy's nodemask in v.nodes, and the new value of mems_allowed should be stored in w.cpuset_mems_allowed to facilitate the next rebind, if it happens. However, 213980c0f23b ("mm, mempolicy: simplify rebinding mempolicies when updating cpusets") introduced a bug where the result of remapping is stored in w.cpuset_mems_allowed instead. Thus, a mempolicy's allowed nodes can evolve in an unexpected way after a series of rebinding due to cpuset mems_allowed changes, possibly binding to a wrong node or a smaller number of nodes which may e.g. overload them. This patch fixes the bug so rebinding again works as intended. [vbabka@suse.cz: new changlog] Link: http://lkml.kernel.org/r/ef6a69c6-c052-b067-8f2c-9d615c619bb9@suse.cz Link: http://lkml.kernel.org/r/1558768043-23184-1-git-send-email-zhongjiang@huawei.com Fixes: 213980c0f23b ("mm, mempolicy: simplify rebinding mempolicies when updating cpusets") Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29fs/proc/array.c: allow reporting eip/esp for all coredumping threadsJohn Ogness1-1/+1
0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in /proc/PID/stat") stopped reporting eip/esp and fd7d56270b52 ("fs/proc: Report eip/esp in /prod/PID/stat for coredumping") reintroduced the feature to fix a regression with userspace core dump handlers (such as minicoredumper). Because PF_DUMPCORE is only set for the primary thread, this didn't fix the original problem for secondary threads. Allow reporting the eip/esp for all threads by checking for PF_EXITING as well. This is set for all the other threads when they are killed. coredump_wait() waits for all the tasks to become inactive before proceeding to invoke a core dumper. Link: http://lkml.kernel.org/r/87y32p7i7a.fsf@linutronix.de Link: http://lkml.kernel.org/r/20190522161614.628-1-jlu@pengutronix.de Fixes: fd7d56270b526ca3 ("fs/proc: Report eip/esp in /prod/PID/stat for coredumping") Signed-off-by: John Ogness <john.ogness@linutronix.de> Reported-by: Jan Luebbe <jlu@pengutronix.de> Tested-by: Jan Luebbe <jlu@pengutronix.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29mm/dev_pfn: exclude MEMORY_DEVICE_PRIVATE while computing virtual addressAnshuman Khandual1-1/+1
The presence of struct page does not guarantee linear mapping for the pfn physical range. Device private memory which is non-coherent is excluded from linear mapping during devm_memremap_pages() though they will still have struct page coverage. Change pfn_t_to_virt() to just check for device private memory before giving out virtual address for a given pfn. pfn_t_to_virt() actually has no callers. Let's fix it for the 5.2 kernel and remove it in 5.3. Link: http://lkml.kernel.org/r/1558089514-25067-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-28NFS/flexfiles: Use the correct TCP timeout for flexfiles I/OTrond Myklebust1-1/+1
Fix a typo where we're confusing the default TCP retrans value (NFS_DEF_TCP_RETRANS) for the default TCP timeout value. Fixes: 15d03055cf39f ("pNFS/flexfiles: Set reasonable default ...") Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-28SUNRPC: Fix up calculation of client message lengthTrond Myklebust1-8/+8
In the case where a record marker was used, xs_sendpages() needs to return the length of the payload + record marker so that we operate correctly in the case of a partial transmission. When the callers check return value, they therefore need to take into account the record marker length. Fixes: 06b5fc3ad94e ("Merge tag 'nfs-rdma-for-5.1-1'...") Cc: stable@vger.kernel.org # 5.1+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-28x86/unwind/orc: Fall back to using frame pointers for generated codeJosh Poimboeuf1-4/+22
The ORC unwinder can't unwind through BPF JIT generated code because there are no ORC entries associated with the code. If an ORC entry isn't available, try to fall back to frame pointers. If BPF and other generated code always do frame pointer setup (even with CONFIG_FRAME_POINTERS=n) then this will allow ORC to unwind through most generated code despite there being no corresponding ORC entries. Fixes: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER") Reported-by: Song Liu <songliubraving@fb.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Kairui Song <kasong@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/b6f69208ddff4343d56b7bfac1fc7cfcd62689e8.1561595111.git.jpoimboe@redhat.com
2019-06-28perf/x86: Always store regs->ip in perf_callchain_kernel()Song Liu1-5/+5
The stacktrace_map_raw_tp BPF selftest is failing because the RIP saved by perf_arch_fetch_caller_regs() isn't getting saved by perf_callchain_kernel(). This was broken by the following commit: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER") With that change, when starting with non-HW regs, the unwinder starts with the current stack frame and unwinds until it passes up the frame which called perf_arch_fetch_caller_regs(). So regs->ip needs to be saved deliberately. Fixes: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER") Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Kairui Song <kasong@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/3975a298fa52b506fea32666d8ff6a13467eee6d.1561595111.git.jpoimboe@redhat.com
2019-06-27ceph: fix ceph_mdsc_build_path to not stop on first componentJeff Layton1-1/+2
When ceph_mdsc_build_path is handed a positive dentry, it will return a zero-length path string with the base set to that dentry. This is not what we want. Always include at least one path component in the string. ceph_mdsc_build_path has behaved this way for a long time but it didn't matter until recent d_name handling rework. Fixes: 964fff7491e4 ("ceph: use ceph_mdsc_build_path instead of clone_dentry_name") Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-06-27pinctrl: mediatek: Update cur_mask in mask/mask opsNicolas Boichat1-14/+4
During suspend/resume, mtk_eint_mask may be called while wake_mask is active. For example, this happens if a wake-source with an active interrupt handler wakes the system: irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so that it can be handled later on in the resume flow. However, this may happen before mtk_eint_do_resume is called: in this case, wake_mask is loaded, and cur_mask is restored from an older copy, re-enabling the interrupt, and causing an interrupt storm (especially for level interrupts). Step by step, for a line that has both wake and interrupt enabled: 1. cur_mask[irq] = 1; wake_mask[irq] = 1; EINT_EN[irq] = 1 (interrupt enabled at hardware level) 2. System suspends, resumes due to that line (at this stage EINT_EN == wake_mask) 3. irq_pm_check_wakeup is called, and disables the interrupt => EINT_EN[irq] = 0, but we still have cur_mask[irq] = 1 4. mtk_eint_do_resume is called, and restores EINT_EN = cur_mask, so it reenables EINT_EN[irq] = 1 => interrupt storm as the driver is not yet ready to handle the interrupt. This patch fixes the issue in step 3, by recording all mask/unmask changes in cur_mask. This also avoids the need to read the current mask in eint_do_suspend, and we can remove mtk_eint_chip_read_mask function. The interrupt will be re-enabled properly later on, sometimes after mtk_eint_do_resume, when the driver is ready to handle it. Fixes: 58a5e1b64bb0 ("pinctrl: mediatek: Implement wake handler and suspend resume") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27proc: remove useless d_is_dir() checkChristian Brauner1-2/+1
Remove the d_is_dir() check from tgid_pidfd_to_pid(). It is pointless since you should never get &proc_tgid_base_operations for f_op on a non-directory. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-06-27copy_process(): don't use ksys_close() on cleanupsAl Viro1-28/+18
anon_inode_getfd() should be used *ONLY* in situations when we are guaranteed to be past the last failure point (including copying the descriptor number to userland, at that). And ksys_close() should not be used for cleanups at all. anon_inode_getfile() is there for all nontrivial cases like that. Just use that... Fixes: b3e583825266 ("clone: add CLONE_PIDFD") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-06-27cpu/hotplug: Fix out-of-bounds read when setting fail stateEiichi Tsukata1-0/+3
Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail can control `struct cpuhp_step *sp` address, results in the following global-out-of-bounds read. Reproducer: # echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail KASAN report: BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0 Read of size 8 at addr ffffffff89734438 by task bash/1941 CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ #31 Call Trace: write_cpuhp_fail+0x2cd/0x2e0 dev_attr_store+0x58/0x80 sysfs_kf_write+0x13d/0x1a0 kernfs_fop_write+0x2bc/0x460 vfs_write+0x1e1/0x560 ksys_write+0x126/0x250 do_syscall_64+0xc1/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f05e4f4c970 The buggy address belongs to the variable: cpu_hotplug_lock+0x98/0xa0 Memory state around the buggy address: ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa ^ ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Add a sanity check for the value written from user space. Fixes: 1db49484f21ed ("smp/hotplug: Hotplug state fail injection") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Link: https://lkml.kernel.org/r/20190627024732.31672-1-devel@etsukata.com
2019-06-26af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKETNeil Horman2-3/+18
When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26sctp: change to hold sk after auth shkey is created successfullyXin Long1-4/+4
Now in sctp_endpoint_init(), it holds the sk then creates auth shkey. But when the creation fails, it doesn't release the sk, which causes a sk defcnf leak, Here to fix it by only holding the sk when auth shkey is created successfully. Fixes: a29a5bd4f5c3 ("[SCTP]: Implement SCTP-AUTH initializations.") Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26riscv: mm: Fix code commentShihPo Hung1-3/+0
Fix the comment since vmalloc_fault doesn't reach flush_tlb_fix_spurious_fault. Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: linux-riscv@lists.infradead.org Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-26dt-bindings: clock: sifive: add MIT license as an option for the header filePaul Walmsley1-1/+1
At Bin Meng's request, add the MIT license as an option for the SiFive FU540 PRCI header file. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Bin Meng <bmeng.cn@gmail.com>
2019-06-26PCI: PM: Avoid skipping bus-level PM on platforms without ACPIRafael J. Wysocki3-6/+31
There are platforms that do not call pm_set_suspend_via_firmware(), so pm_suspend_via_firmware() returns 'false' on them, but the power states of PCI devices (PCIe ports in particular) are changed as a result of powering down core platform components during system-wide suspend. Thus the pm_suspend_via_firmware() checks in pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by commit 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to- idle") are not sufficient to determine that devices left in D0 during suspend will remain in D0 during resume and so the bus-level power management can be skipped for them. For this reason, introduce a new global suspend flag, PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only and replace the pm_suspend_via_firmware() checks mentioned above with checks against this flag. Fixes: 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-idle") Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-26ipv6: fix neighbour resolution with raw socketNicolas Dichtel1-1/+2
The scenario is the following: the user uses a raw socket to send an ipv6 packet, destinated to a not-connected network, and specify a connected nh. Here is the corresponding python script to reproduce this scenario: import socket IPPROTO_RAW = 255 send_s = socket.socket(socket.AF_INET6, socket.SOCK_RAW, IPPROTO_RAW) # scapy # p = IPv6(src='fd00:100::1', dst='fd00:200::fa')/ICMPv6EchoRequest() # str(p) req = b'`\x00\x00\x00\x00\x08:@\xfd\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xfd\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfa\x80\x00\x81\xc0\x00\x00\x00\x00' send_s.sendto(req, ('fd00:175::2', 0, 0, 0)) fd00:175::/64 is a connected route and fd00:200::fa is not a connected host. With this scenario, the kernel starts by sending a NS to resolve fd00:175::2. When it receives the NA, it flushes its queue and try to send the initial packet. But instead of sending it, it sends another NS to resolve fd00:200::fa, which obvioulsy fails, thus the packet is dropped. If the user sends again the packet, it now uses the right nh (fd00:175::2). The problem is that ip6_dst_lookup_neigh() uses the rt6i_gateway, which is :: because the associated route is a connected route, thus it uses the dst addr of the packet. Let's use rt6_nexthop() to choose the right nh. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26ipv6: constify rt6_nexthop()Nicolas Dichtel5-7/+7
There is no functional change in this patch, it only prepares the next one. rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const variables. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: dsa: microchip: Use gpiod_set_value_cansleep()Marek Vasut1-3/+3
Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly fine for the kernel to sleep for a bit in ksz_switch_register(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: aquantia: fix vlans not working over bridged networkDmitry Bogdanov4-8/+23
In configuration of vlan over bridge over aquantia device it was found that vlan tagged traffic is dropped on chip. The reason is that bridge device enables promisc mode, but in atlantic chip vlan filters will still apply. So we have to corellate promisc settings with vlan configuration. The solution is to track in a separate state variable the need of vlan forced promisc. And also consider generic promisc configuration when doing vlan filter config. Fixes: 7975d2aff5af ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26ipv4: reset rt_iif for recirculated mcast/bcast out pktsStephen Suryaputra3-0/+46
Multicast or broadcast egress packets have rt_iif set to the oif. These packets might be recirculated back as input and lookup to the raw sockets may fail because they are bound to the incoming interface (skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function returns rt_iif instead of skb_iif. Hence, the lookup fails. v2: Make it non vrf specific (David Ahern). Reword the changelog to reflect it. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26dt-bindings: riscv: resolve 'make dt_binding_check' warningsPaul Walmsley1-12/+14
Rob pointed out that one of the examples in the RISC-V 'cpus' YAML schema results in warnings from 'make dt_binding_check'. Fix these. While here, make the whitespace in the second example consistent with the first example. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> # for fixing the dtc warnings
2019-06-26riscv: dts: Re-organize the DT nodesYash Shah2-0/+19
As per the convention for any SOC device with external connection, define only device DT node in SOC DTSi file with status = "disabled" and enable device in Board DTS file with status = "okay" Reported-by: Anup Patel <anup@brainfault.org> Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-26RISC-V: defconfig: enable MMC & SPI for RISC-VAtish Patra1-0/+5
Currently, riscv upstream defconfig doesn't let you boot through userspace if rootfs is on the SD card. Let's enable MMC & SPI drivers as well so that one can boot to the user space using default config in upstream kernel. While here, enable automatic mounting of devtmpfs to simplify kernel testing with minimal root filesystems. (pjw) Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: mention the DEVTMPFS_MOUNT change in the patch description] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-26team: Always enable vlan tx offloadYueHaibing1-1/+1
We should rather have vlan_tci filled all the way down to the transmitting netdevice and let it do the hw/sw vlan implementation. Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net/smc: Fix error path in smc_initYueHaibing1-1/+4
If register_pernet_subsys success in smc_init, we should cleanup it in case any other error. Fixes: 64e28b52c7a6 (net/smc: add pnet table namespace support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.