aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-09-30mtd: spinand: gigadevice: Only one dummy byte in QUADIOHauke Mehrtens1-2/+2
The datasheet only lists one dummy byte in the 0xEH operation for the following chips: * GD5F1GQ4xExxG * GD5F1GQ4xFxxG * GD5F1GQ4UAYIG * GD5F4GQ4UAYIG Fixes: c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-2-hauke@hauke-m.de
2020-09-30mtd: rawnand: vf610: disable clk on error handling path in probeEvgeny Novikov1-2/+4
vf610_nfc_probe() does not invoke clk_disable_unprepare() on one error handling path. The patch fixes that. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 6f0ce4dfc5a3 ("mtd: rawnand: vf610: Avoid a potential NULL pointer dereference") Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200806072634.23528-1-novikov@ispras.ru
2020-09-30mtd: rawnand: oxnas: cleanup/simplify codePavel Machek1-2/+1
Simplify oxnas_nand_probe. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200724083825.GA31437@amd
2020-09-30mtd: spinand: macronix: Add support for MX31UF1GE4BCYouChing Lin1-0/+10
The Macronix MX31UF1GE4BC is a 1.8V, 1Gbit (128MB) serial NAND flash device. Validated by read, erase, read back, write and read back on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host (driver/spi/spi-mxic.c). Signed-off-by: YouChing Lin <ycllin@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595404978-31079-3-git-send-email-ycllin@mxic.com.tw
2020-09-30mtd: spinand: macronix: Add support for MX31LF1GE4BCYouChing Lin1-0/+10
The Macronix MX31LF1GE4BC is a 3V, 1Gbit (128MB) serial NAND flash device. Validated by read, erase, read back, write and read back on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host (driver/spi/spi-mxic.c). Signed-off-by: YouChing Lin <ycllin@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595404978-31079-2-git-send-email-ycllin@mxic.com.tw
2020-09-30mtd: rawnand: pasemi: Make pasemi_device_ready() staticWei Yongjun1-1/+1
The sparse tool complains as follows: drivers/mtd/nand/raw/pasemi_nand.c:71:5: warning: symbol 'pasemi_device_ready' was not declared. Should it be static? This function is not used outside of pasemi_nand.c, so this commit marks it static. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200721151657.41027-1-weiyongjun1@huawei.com
2020-09-30mtd: rawnand: stm32_fmc2: fix a buffer overflowChristophe Kerello1-1/+1
This patch solves following static checker warning: drivers/mtd/nand/raw/stm32_fmc2_nand.c:350 stm32_fmc2_nfc_select_chip() error: buffer overflow 'nfc->data_phys_addr' 2 <= 2 The CS value can only be 0 or 1. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595325127-32693-1-git-send-email-christophe.kerello@st.com
2020-09-30mtd: rawnand: atmel: Get rid of the legacy interface implementationBoris Brezillon1-197/+1
Now that exec_op() is implemented, we can get rid of all the legacy hooks. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-7-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Convert the driver to exec_op()Boris Brezillon1-0/+267
Both SMC and HSMC are converted to exec_op(). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-6-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Use nand_prog_page_end_op()Boris Brezillon1-14/+2
The nand_prog_page_end_op() sequence is open-coded in atmel_hsmc_nand_pmecc_write_pg(). Let's use the generic helper here. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-5-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Use nand_{write,read}_data_op()Boris Brezillon1-5/+5
Use the nand_{write,read}_data_op() helpers instead of calling the atmel_nand_{read,write}_buf() functions directly. This will ease the transition to exec_op(). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-4-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Drop redundant nand_read_page_op()Boris Brezillon1-4/+1
The legacy page read path in atmel_hsmc_nand_pmecc_read_pg() issues a nand_read_page_op() that's already issued by atmel_nand_pmecc_read_pg(). Let's get rid of the unneeded one. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-3-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Enable the NFC controller at probe timeBoris Brezillon1-6/+6
No need to enable it everytime select_chip() is called. If we really care about PM, we should implement runtime PM hooks and disable the controller and all its clocks when the controller has been unused for some time. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-2-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: Use the NAND framework user_conf object for ECC flagsMiquel Raynal6-13/+15
Instead of storing the ECC flags in chip->ecc.options, use nanddev->ecc.user_conf.flags. There is currently only one to save: NAND_ECC_MAXIMIZE. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-21-miquel.raynal@bootlin.com
2020-09-30mtd: rawnand: Use the ECC framework user input parsing bitsMiquel Raynal2-84/+70
Many helpers are generic to all NAND chips, they should not be raw-NAND specific, so use the generic ones. To avoid moving all the raw NAND core "history" into the generic NAND layer, we keep a part of this parsing in the raw NAND core to ensure backward compatibility. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-20-miquel.raynal@bootlin.com
2020-09-30mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helperMiquel Raynal1-38/+1
Plus, the new helper has a more "english" name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-19-miquel.raynal@bootlin.com
2020-09-30mtd: rawnand: Use the ECC framework OOB layoutsMiquel Raynal9-176/+20
No need to have our own in the raw NAND core. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-18-miquel.raynal@bootlin.com
2020-09-28mtd: rawnand: Make use of the ECC frameworkMiquel Raynal2-0/+2
Just enable the ECC framework with raw NAND so that we can drop, one by one, all the unnecessary/redundant definitions. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-17-miquel.raynal@bootlin.com
2020-09-28mtd: nand: Use the new generic ECC objectMiquel Raynal1-7/+7
Embed a generic NAND ECC high-level object in the nand_device structure to carry all the ECC engine configuration/data. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-16-miquel.raynal@bootlin.com
2020-09-28mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevantMiquel Raynal16-86/+144
Instead of accessing ->strength/step_size directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-15-miquel.raynal@bootlin.com
2020-09-28mtd: nand: Create helpers to set/extract the ECC requirementsMiquel Raynal1-0/+24
Despite its current name, the eccreq field actually encodes both the NAND requirements and the final ECC configuration. That works fine when using on-die ECC since those 2 concepts match perfectly, but it starts being a problem as soon as we use on-host ECC engines, where we're not guaranteed to have a perfect match. Let's hide the ECC requirements access behind helpers so we can later split those 2 concepts. As the structures have not been clarified yet, these helpers access the same internal variable as nanddev_get_ecc_conf() for now. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-14-miquel.raynal@bootlin.com
2020-09-28mtd: spinand: Use nanddev_get_ecc_conf() when relevantMiquel Raynal3-9/+10
Instead of accessing ->strength/step_size directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-13-miquel.raynal@bootlin.com
2020-09-28mtd: nand: Create a helper to extract the ECC configurationMiquel Raynal1-0/+10
Despite its current name, the eccreq field actually encodes both the NAND requirements and the final ECC configuration. That works fine when using on-die ECC since those 2 concepts match perfectly, but it starts being a problem as soon as we use on-host ECC engines, where we're not guaranteed to have a perfect match. Let's hide the ECC configuration access behind a helper so we can later split those 2 concepts. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-12-miquel.raynal@bootlin.com
2020-09-28mtd: rawnand: Use the new ECC engine type enumerationMiquel Raynal78-213/+239
Mechanical switch from the legacy "mode" enumeration to the new "engine type" enumeration in drivers and board files. The device tree parsing is also updated to return the new enumeration from the old strings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
2020-09-28mtd: rawnand: Separate the ECC engine type and the ECC byte placementMiquel Raynal10-48/+71
The use of "syndrome" placement should not be encoded in the ECC engine mode/type. Create a "placement" field in NAND chip and change all occurrences of the NAND_ECC_HW_SYNDROME enumeration to be just NAND_ECC_HW and possibly a placement entry like NAND_ECC_PLACEMENT_INTERLEAVED. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-10-miquel.raynal@bootlin.com
2020-09-02mtd: nand: Introduce the ECC engine frameworkMiquel Raynal4-0/+608
Create a generic ECC engine framework. This is a base to instantiate ECC engine objects. If we really want to be generic, bindings must evolve, so here is the new logic. The following three properties are mutually exclusive: - The nand-no-ecc-engine boolean property is set and there is no ECC engine to retrieve. - The nand-use-soft-ecc-engine boolean property is set and the core will force using the use of software correction. - There is a nand-ecc-engine property pointing at a node which will act as ECC engine. It the later case, the property may reference: - The NAND chip node itself (for the on-die ECC case). - The parent node if the NAND controller embeds an ECC engine. - Any other node being an external ECC controller as well. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-9-miquel.raynal@bootlin.com
2020-08-27dt-bindings: mtd: Document boolean NAND ECC propertiesMiquel Raynal1-0/+8
Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties. The former is here to force software correction, the latter prevents any correction to happen. These properties (along with nand-ecc-engine) are supposed to be more accurate than the current nand-ecc-modes wich is very misleading and very often people think it is mandatory while the core should be relied upon to decide which correction to handle. nand-ecc-mode was already inacurate, but it becomes totally problematic with setups where there are several hardware engines. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-8-miquel.raynal@bootlin.com
2020-08-27dt-bindings: mtd: Document nand-ecc-engineMiquel Raynal1-0/+13
This property is needed to precisely point to the hardware ECC engine to use when there are several of them available. Here, hardware also refers to the on-die possibility. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-7-miquel.raynal@bootlin.com
2020-08-27dt-bindings: mtd: Document nand-ecc-placementMiquel Raynal1-0/+10
This optional property defines where the ECC bytes are expected to be stored. No value defaults to an unknown location, while these locations can be explicitly set to OOB or interleaved depending if the ECC bytes are entirely stored in the OOB area or mixed with regular data in the main area (also sometimes referred as "syndrome"). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-6-miquel.raynal@bootlin.com
2020-08-27mtd: nand: Add a NAND page I/O request typeMiquel Raynal2-4/+18
Use an enum to differentiate the type of I/O (reading or writing a page). Also update the request iterator. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-5-miquel.raynal@bootlin.com
2020-08-27mtd: rawnand: Move the nand_ecc_algo enum to the generic NAND layerMiquel Raynal2-14/+14
This enumeration is generic and will be reused NAND-wide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-4-miquel.raynal@bootlin.com
2020-08-27mtd: rawnand: Rename the ECC algorithm enumeration itemsMiquel Raynal28-70/+70
NAND_ECC_ is not a meaningful prefix, use NAND_ECC_ALGO_ instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-3-miquel.raynal@bootlin.com
2020-08-27mtd: rawnand: Add a kernel doc to the ECC algorithm enumerationMiquel Raynal1-0/+7
Before moving it to the generic raw NAND core, ensure the enumeration is properly described. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-2-miquel.raynal@bootlin.com
2020-08-23Linux 5.9-rc2Linus Torvalds1-1/+1
2020-08-22do_epoll_ctl(): clean the failure exits up a bitAl Viro1-13/+6
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-22epoll: Keep a reference on files added to the check listMarc Zyngier1-2/+9
When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-22net: nexthop: don't allow empty NHA_GROUPNikolay Aleksandrov1-1/+4
Currently the nexthop code will use an empty NHA_GROUP attribute, but it requires at least 1 entry in order to function properly. Otherwise we end up derefencing null or random pointers all over the place due to not having any nh_grp_entry members allocated, nexthop code relies on having at least the first member present. Empty NHA_GROUP doesn't make any sense so just disallow it. Also add a WARN_ON for any future users of nexthop_create_group(). BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 0 PID: 558 Comm: ip Not tainted 5.9.0-rc1+ #93 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:fib_check_nexthop+0x4a/0xaa Code: 0f 84 83 00 00 00 48 c7 02 80 03 f7 81 c3 40 80 fe fe 75 12 b8 ea ff ff ff 48 85 d2 74 6b 48 c7 02 40 03 f7 81 c3 48 8b 40 10 <48> 8b 80 80 00 00 00 eb 36 80 78 1a 00 74 12 b8 ea ff ff ff 48 85 RSP: 0018:ffff88807983ba00 EFLAGS: 00010213 RAX: 0000000000000000 RBX: ffff88807983bc00 RCX: 0000000000000000 RDX: ffff88807983bc00 RSI: 0000000000000000 RDI: ffff88807bdd0a80 RBP: ffff88807983baf8 R08: 0000000000000dc0 R09: 000000000000040a R10: 0000000000000000 R11: ffff88807bdd0ae8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88807bea3100 R15: 0000000000000001 FS: 00007f10db393700(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000007bd0f004 CR4: 00000000003706f0 Call Trace: fib_create_info+0x64d/0xaf7 fib_table_insert+0xf6/0x581 ? __vma_adjust+0x3b6/0x4d4 inet_rtm_newroute+0x56/0x70 rtnetlink_rcv_msg+0x1e3/0x20d ? rtnl_calcit.isra.0+0xb8/0xb8 netlink_rcv_skb+0x5b/0xac netlink_unicast+0xfa/0x17b netlink_sendmsg+0x334/0x353 sock_sendmsg_nosec+0xf/0x3f ____sys_sendmsg+0x1a0/0x1fc ? copy_msghdr_from_user+0x4c/0x61 ___sys_sendmsg+0x63/0x84 ? handle_mm_fault+0xa39/0x11b5 ? sockfd_lookup_light+0x72/0x9a __sys_sendmsg+0x50/0x6e do_syscall_64+0x54/0xbe entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f10dacc0bb7 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 8b 05 9a 4b 2b 00 85 c0 75 2e 48 63 ff 48 63 d2 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 b1 f2 2a 00 f7 d8 64 89 02 48 RSP: 002b:00007ffcbe628bf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffcbe628f80 RCX: 00007f10dacc0bb7 RDX: 0000000000000000 RSI: 00007ffcbe628c60 RDI: 0000000000000003 RBP: 000000005f41099c R08: 0000000000000001 R09: 0000000000000008 R10: 00000000000005e9 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007ffcbe628d70 R15: 0000563a86c6e440 Modules linked in: CR2: 0000000000000080 CC: David Ahern <dsahern@gmail.com> Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-21dt-bindings: vendor-prefixes: Remove trailing whitespaceGeert Uytterhoeven1-1/+1
Fixes: f516fb704d02fff2 ("dt-bindings: Whitespace clean-ups in schema files") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200819092058.1526-1-geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-21KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not setWill Deacon1-4/+13
When an MMU notifier call results in unmapping a range that spans multiple PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary, since this avoids running into RCU stalls during VM teardown. Unfortunately, if the VM is destroyed as a result of OOM, then blocking is not permitted and the call to the scheduler triggers the following BUG(): | BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394 | in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper | INFO: lockdep is turned off. | CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1 | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 | Call trace: | dump_backtrace+0x0/0x284 | show_stack+0x1c/0x28 | dump_stack+0xf0/0x1a4 | ___might_sleep+0x2bc/0x2cc | unmap_stage2_range+0x160/0x1ac | kvm_unmap_hva_range+0x1a0/0x1c8 | kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8 | __mmu_notifier_invalidate_range_start+0x218/0x31c | mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0 | __oom_reap_task_mm+0x128/0x268 | oom_reap_task+0xac/0x298 | oom_reaper+0x178/0x17c | kthread+0x1e4/0x1fc | ret_from_fork+0x10/0x30 Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier flags. Cc: <stable@vger.kernel.org> Fixes: 8b3405e345b5 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd") Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-3-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()Will Deacon10-10/+17
The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21dt-bindings: net: correct description of phy-connection-typeMadalin Bucur1-1/+2
The phy-connection-type parameter is described in ePAPR 1.1: Specifies interface type between the Ethernet device and a physical layer (PHY) device. The value of this property is specific to the implementation. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Link: https://lore.kernel.org/r/1597917724-11127-1-git-send-email-madalin.bucur@oss.nxp.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-21dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instancesRob Herring1-0/+8
The intel,lgm-pcie binding is matching on all snps,dw-pcie instances which is wrong. Add a custom 'select' entry to fix this. Fixes: e54ea45a4955 ("dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller") Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Reviewed-by: Dilip Kota <eswara.kota@linux.intel.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-21bpf: Fix two typos in uapi/linux/bpf.hTobias Klauser2-10/+10
Also remove trailing whitespaces in bpf_skb_get_tunnel_key example code. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200821133642.18870-1-tklauser@distanz.ch
2020-08-21net: dsa: b53: check for timeoutTom Rix1-0/+2
clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-21ARM64: vdso32: Install vdso32 from vdso_installStephen Boyd2-1/+2
Add the 32-bit vdso Makefile to the vdso_install rule so that 'make vdso_install' installs the 32-bit compat vdso when it is compiled. Fixes: a7f71a2c8903 ("arm64: compat: Add vDSO") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Will Deacon <will@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20200818014950.42492-1-swboyd@chromium.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-08-21afs: Fix NULL deref in afs_dynroot_depopulate()David Howells1-9/+11
If an error occurs during the construction of an afs superblock, it's possible that an error occurs after a superblock is created, but before we've created the root dentry. If the superblock has a dynamic root (ie. what's normally mounted on /afs), the afs_kill_super() will call afs_dynroot_depopulate() to unpin any created dentries - but this will oops if the root hasn't been created yet. Fix this by skipping that bit of code if there is no root dentry. This leads to an oops looking like: general protection fault, ... KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] ... RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385 ... Call Trace: afs_kill_super+0x13b/0x180 fs/afs/super.c:535 deactivate_locked_super+0x94/0x160 fs/super.c:335 afs_get_tree+0x1124/0x1460 fs/afs/super.c:598 vfs_get_tree+0x89/0x2f0 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x1387/0x2070 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount fs/namespace.c:3390 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 which is oopsing on this line: inode_lock(root->d_inode); presumably because sb->s_root was NULL. Fixes: 0da0b7fd73e4 ("afs: Display manually added cells in dynamic root mount") Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-21mm, page_alloc: fix core hung in free_pcppages_bulk()Charan Teja Reddy1-0/+5
The following race is observed with the repeated online, offline and a delay between two successive online of memory blocks of movable zone. P1 P2 Online the first memory block in the movable zone. The pcp struct values are initialized to default values,i.e., pcp->high = 0 & pcp->batch = 1. Allocate the pages from the movable zone. Try to Online the second memory block in the movable zone thus it entered the online_pages() but yet to call zone_pcp_update(). This process is entered into the exit path thus it tries to release the order-0 pages to pcp lists through free_unref_page_commit(). As pcp->high = 0, pcp->count = 1 proceed to call the function free_pcppages_bulk(). Update the pcp values thus the new pcp values are like, say, pcp->high = 378, pcp->batch = 63. Read the pcp's batch value using READ_ONCE() and pass the same to free_pcppages_bulk(), pcp values passed here are, batch = 63, count = 1. Since num of pages in the pcp lists are less than ->batch, then it will stuck in while(list_empty(list)) loop with interrupts disabled thus a core hung. Avoid this by ensuring free_pcppages_bulk() is called with proper count of pcp list pages. The mentioned race is some what easily reproducible without [1] because pcp's are not updated for the first memory block online and thus there is a enough race window for P2 between alloc+free and pcp struct values update through onlining of second memory block. With [1], the race still exists but it is very narrow as we update the pcp struct values for the first memory block online itself. This is not limited to the movable zone, it could also happen in cases with the normal zone (e.g., hotplug to a node that only has DMA memory, or no other memory yet). [1]: https://patchwork.kernel.org/patch/11696389/ Fixes: 5f8dcc21211a ("page-allocator: split per-cpu list into one-list-per-migrate-type") Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: <stable@vger.kernel.org> [2.6+] Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-21mm: include CMA pages in lowmem_reserve at bootDoug Berger1-1/+1
The lowmem_reserve arrays provide a means of applying pressure against allocations from lower zones that were targeted at higher zones. Its values are a function of the number of pages managed by higher zones and are assigned by a call to the setup_per_zone_lowmem_reserve() function. The function is initially called at boot time by the function init_per_zone_wmark_min() and may be called later by accesses of the /proc/sys/vm/lowmem_reserve_ratio sysctl file. The function init_per_zone_wmark_min() was moved up from a module_init to a core_initcall to resolve a sequencing issue with khugepaged. Unfortunately this created a sequencing issue with CMA page accounting. The CMA pages are added to the managed page count of a zone when cma_init_reserved_areas() is called at boot also as a core_initcall. This makes it uncertain whether the CMA pages will be added to the managed page counts of their zones before or after the call to init_per_zone_wmark_min() as it becomes dependent on link order. With the current link order the pages are added to the managed count after the lowmem_reserve arrays are initialized at boot. This means the lowmem_reserve values at boot may be lower than the values used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the ratio values are unchanged. In many cases the difference is not significant, but for example an ARM platform with 1GB of memory and the following memory layout cma: Reserved 256 MiB at 0x0000000030000000 Zone ranges: DMA [mem 0x0000000000000000-0x000000002fffffff] Normal empty HighMem [mem 0x0000000030000000-0x000000003fffffff] would result in 0 lowmem_reserve for the DMA zone. This would allow userspace to deplete the DMA zone easily. Funnily enough $ cat /proc/sys/vm/lowmem_reserve_ratio would fix up the situation because as a side effect it forces setup_per_zone_lowmem_reserve. This commit breaks the link order dependency by invoking init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages have the chance to be properly accounted in their zone(s) and allowing the lowmem_reserve arrays to receive consistent values. Fixes: bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jason Baron <jbaron@akamai.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-21squashfs: avoid bio_alloc() failure with 1Mbyte blocksPhillip Lougher1-1/+5
This is a regression introduced by the patch "migrate from ll_rw_block usage to BIO". Bio_alloc() is limited to 256 pages (1 Mbyte). This can cause a failure when reading 1 Mbyte block filesystems. The problem is a datablock can be fully (or almost uncompressed), requiring 256 pages, but, because blocks are not aligned to page boundaries, it may require 257 pages to read. Bio_kmalloc() can handle 1024 pages, and so use this for the edge condition. Fixes: 93e72b3c612a ("squashfs: migrate from ll_rw_block usage to BIO") Reported-by: Nicolas Prochazka <nicolas.prochazka@gmail.com> Reported-by: Tomoatsu Shimada <shimada@walbrix.com> Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Cc: Philippe Liard <pliard@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Adrien Schildknecht <adrien+dev@schischi.me> Cc: Daniel Rosenberg <drosen@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200815035637.15319-1-phillip@squashfs.org.uk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-21uprobes: __replace_page() avoid BUG in munlock_vma_page()Hugh Dickins1-1/+1
syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when called from uprobes __replace_page(). Which of many ways to fix it? Settled on not calling when PageCompound (since Head and Tail are equals in this context, PageCompound the usual check in uprobes.c, and the prior use of FOLL_SPLIT_PMD will have cleared PageMlocked already). Fixes: 5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [5.4+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.