| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.
This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.
Fixes: 02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While investigating on why a synchronize_net() has been added recently
in ipv6_mc_down(), I found that igmp6_event_query() and igmp6_event_report()
might drop skbs in some cases.
Discussion about removing synchronize_net() from ipv6_mc_down()
will happen in a different thread.
Fixes: f185de28d9ae ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220303173728.937869-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit said one thing but did another. It explains that we
should restore the "return err" to the original "goto out_unwind_tagger",
but instead it replaced it with "goto out_unlock".
When DSA_NOTIFIER_TAG_PROTO fails after the first switch of a
multi-switch tree, the switches would end up not using the same tagging
protocol.
Fixes: 0b0e2ff10356 ("net: dsa: restore error path of dsa_tree_change_tag_proto")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220303154249.1854436-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if
netif is not OK") addressed the ring transient state when
MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the
interface to through down/up. Maurice reported that when carrier is not
ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU
cycles due to the constant NAPI rescheduling as ixgbe_poll() states that
there is still some work to be done.
To fix this, do not set work_done to false for a !netif_carrier_ok().
Fixes: c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK")
Reported-by: Maurice Baijens <maurice.baijens@ellips.com>
Tested-by: Maurice Baijens <maurice.baijens@ellips.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test runs several test cases and is supposed to return an error in
case at least one of them failed.
Currently, the check of the return value of each test case is in the
wrong place, which can result in the wrong return value. For example:
# TESTS='tc_police' ./resource_scale.sh
TEST: 'tc_police' [default] 968 [FAIL]
tc police offload count failed
Error: mlxsw_spectrum: Failed to allocate policer index.
We have an error talking to the kernel
Command failed /tmp/tmp.i7Oc5HwmXY:969
TEST: 'tc_police' [default] overflow 969 [ OK ]
...
TEST: 'tc_police' [ipv4_max] overflow 969 [ OK ]
$ echo $?
0
Fix this by moving the check to be done after each test case.
Fixes: 059b18e21c63 ("selftests: mlxsw: Return correct error code in resource scale test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.
iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:
$ tc filter show dev swp2 ingress
...
filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
eth_type ipv6
dst_ip 2001:db8:1::7bf
skip_sw
in_hw in_hw_count 1
action order 1: police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
ref 1 bind 1
not_in_hw
used_hw_stats immediate
The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.
Fix that by using JSON output instead.
Fixes: 5061e773264b ("selftests: mlxsw: Add scale test for tc-police")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel points out that since commit 52cff74eef5d ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.
One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
-> dcb_ieee_setapp
If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().
Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.
Fixes: 91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix an error message and report the correct failing function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
seqno could be read as a stale value outside of the lock. The lock is
already acquired to protect the modification of seqno against a possible
race condition. Place the reading of this value also inside this locking
to protect it against a possible race condition.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
hci_cmd_sync_queue can be called multiple times, each adding a
hci_cmd_sync_work_entry, before hci_cmd_sync_work is run so this makes
sure they are all dequeued properly otherwise it creates a backlog of
entries that are never run.
Link: https://lore.kernel.org/all/CAJCQCtSeUtHCgsHXLGrSTWKmyjaQDbDNpP4rb0i+RE+L2FTXSA@mail.gmail.com/T/
Fixes: 6a98e3836fa20 ("Bluetooth: Add helper for serialized HCI command execution")
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
There is only one "goto done;" in set_device_flags() and this happens
*before* hci_dev_lock() is called, move the done label to after the
hci_dev_unlock() to fix the following unlock balance:
[ 31.493567] =====================================
[ 31.493571] WARNING: bad unlock balance detected!
[ 31.493576] 5.17.0-rc2+ #13 Tainted: G C E
[ 31.493581] -------------------------------------
[ 31.493584] bluetoothd/685 is trying to release lock (&hdev->lock) at:
[ 31.493594] [<ffffffffc07603f5>] set_device_flags+0x65/0x1f0 [bluetooth]
[ 31.493684] but there are no more locks to release!
Note this bug has been around for a couple of years, but before
commit fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
supported_flags was hardcoded to "((1U << HCI_CONN_FLAG_MAX) - 1)" so
the check for unsupported flags which does the "goto done;" never
triggered.
Fixes: fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The problem of SMC_CLC_DECL_ERR_REGRMB on the server is very clear.
Based on the fact that whether a new SMC connection can be accepted or
not depends on not only the limit of conn nums, but also the available
entries of rtoken. Since the rtoken release is trigger by peer, while
the conn nums is decrease by local, tons of thing can happen in this
time difference.
This only thing that needs to be mentioned is that now all connection
creations are completely protected by smc_server_lgr_pending lock, it's
enough to check only the available entries in rtokens_used_mask.
Fixes: cd6851f30386 ("smc: remote memory buffers (RMBs)")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The main reason for this unexpected SMC_CLC_DECL_ERR_REGRMB in client
dues to following execution sequence:
Server Conn A: Server Conn B: Client Conn B:
smc_lgr_unregister_conn
smc_lgr_register_conn
smc_clc_send_accept ->
smc_rtoken_add
smcr_buf_unuse
-> Client Conn A:
smc_rtoken_delete
smc_lgr_unregister_conn() makes current link available to assigned to new
incoming connection, while smcr_buf_unuse() has not executed yet, which
means that smc_rtoken_add may fail because of insufficient rtoken_entry,
reversing their execution order will avoid this problem.
Fixes: 3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.
The following log reveals it:
[ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[ 3.975181] Call Trace:
[ 3.976208] local_pci_probe+0x13f/0x210
[ 3.977248] pci_device_probe+0x34c/0x6d0
[ 3.977255] ? pci_uevent+0x470/0x470
[ 3.978265] really_probe+0x24c/0x8d0
[ 3.978273] __driver_probe_device+0x1b3/0x280
[ 3.979288] driver_probe_device+0x50/0x370
Fix this by checking whether the 'ci' is a null pointer first.
Fixes: 8c14f9c70327 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If recv_actor() returns an incorrect value, tcp_read_sock()
might loop forever.
Instead, issue a one time warning and make sure to make progress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-2-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, sk_psock_verdict_recv() returns skb->len
This is problematic because tcp_read_sock() might have
passed orig_len < skb->len, due to the presence of TCP urgent data.
This causes an infinite loop from tcp_read_sock()
Followup patch will make tcp_read_sock() more robust vs bad actors.
Fixes: ef5659280eb1 ("bpf, sockmap: Allow skipping sk_skb parser program")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to function, the IPA driver very clearly requires the
interconnect framework to be enabled in the kernel configuration.
State that dependency in the Kconfig file.
This became a problem when CONFIG_COMPILE_TEST support was added.
Non-Qualcomm platforms won't necessarily enable CONFIG_INTERCONNECT.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 38a4066f593c5 ("net: ipa: support COMPILE_TEST")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220301113440.257916-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The truesize for a UDP GRO packet is added by main skb and skbs in main
skb's frag_list:
skb_gro_receive_list
p->truesize += skb->truesize;
The commit 53475c5dd856 ("net: fix use-after-free when UDP GRO with
shared fraglist") introduced a truesize increase for frag_list skbs.
When uncloning skb, it will call pskb_expand_head and trusesize for
frag_list skbs may increase. This can occur when allocators uses
__netdev_alloc_skb and not jump into __alloc_skb. This flow does not
use ksize(len) to calculate truesize while pskb_expand_head uses.
skb_segment_list
err = skb_unclone(nskb, GFP_ATOMIC);
pskb_expand_head
if (!skb->sk || skb->destructor == sock_edemux)
skb->truesize += size - osize;
If we uses increased truesize adding as delta_truesize, it will be
larger than before and even larger than previous total truesize value
if skbs in frag_list are abundant. The main skb truesize will become
smaller and even a minus value or a huge value for an unsigned int
parameter. Then the following memory check will drop this abnormal skb.
To avoid this error we should use the original truesize to segment the
main skb.
Fixes: 53475c5dd856 ("net: fix use-after-free when UDP GRO with shared fraglist")
Signed-off-by: lena wang <lena.wang@mediatek.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1646133431-8948-1-git-send-email-lena.wang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While it might work, the current approach is fragile in a few ways:
- whenever members in the structure are shuffled, the pointer will be wrong
- the resource freeing may include more than covered by kfree()
Fix this by using charlcd_free() call instead of kfree().
Fixes: 8c9108d014c5 ("auxdisplay: add a driver for lcd2s character display")
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Once allocated the struct lcd2s_data is never freed.
Fix the memory leak by switching to devm_kzalloc().
Fixes: 8c9108d014c5 ("auxdisplay: add a driver for lcd2s character display")
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
It seems that the lcd2s_redefine_char() has never been properly
tested. The buffer is filled by DEF_CUSTOM_CHAR command followed
by the character number (from 0 to 7), but immediately after that
these bytes are rewritten by the decoded hex stream.
Fix the index to fill the buffer after the command and number.
Fixes: 8c9108d014c5 ("auxdisplay: add a driver for lcd2s character display")
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
[fixed typo in commit message]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Propagate the value to the user space so it can understand
if the operation failed or not.
Fixes: bfcfdb59b669 ("iwlwifi: mvm: add vendor commands needed for iwlmei")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20220302072715.4885-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The wdev channel information is updated post channel switch only for
the station mode and not for the other modes. Due to this, the P2P client
still points to the old value though it moved to the new channel
when the channel change is induced from the P2P GO.
Update the bss channel after CSA channel switch completion for P2P client
interface as well.
Signed-off-by: Sreeramya Soratkal <quic_ssramya@quicinc.com>
Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When CONFIG_IWLWIFI=m and CONFIG_IWLMEI=y, the kernel build system
must be told to build the iwlwifi/ subdirectory for both IWLWIFI and
IWLMEI so that builds for both =y and =m are done.
This resolves an undefined reference build error:
ERROR: modpost: "iwl_mei_is_connected" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined!
Fixes: 977df8bd5844 ("wlwifi: work around reverse dependency on MEI")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20220227200051.7176-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In ("ptp: ocp: Have FPGA fold in ns adjustment for adjtime."), the
ns adjustment was written to the FPGA register, so the clock could
accurately perform adjustments.
However, the adjtime() call passes in a s64, while the clock adjustment
registers use a s32. When trying to perform adjustments with a large
value (37 sec), things fail.
Examine the incoming delta, and if larger than 1 sec, use the original
(coarse) adjustment method. If smaller than 1 sec, then allow the
FPGA to fold in the changes over a 1 second window.
Fixes: 6d59d4fa1789 ("ptp: ocp: Have FPGA fold in ns adjustment for adjtime.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220228203957.367371-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
z_idataoff here is an absolute physical offset, so it should use
erofs_off_t (64 bits at least). Otherwise, it'll get trimmed and
cause the decompresion failure.
Link: https://lore.kernel.org/r/20220222033118.20540-1-hsiangkao@linux.alibaba.com
Fixes: ab92184ff8f1 ("erofs: add on-disk compressed tail-packing inline support")
Reviewed-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The ifindex doesn't have to be unique for multiple network namespaces on
the same machine.
$ ip netns add test1
$ ip -net test1 link add dummy1 type dummy
$ ip netns add test2
$ ip -net test2 link add dummy2 type dummy
$ ip -net test1 link show dev dummy1
6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 96:81:55:1e:dd:85 brd ff:ff:ff:ff:ff:ff
$ ip -net test2 link show dev dummy2
6: dummy2: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 5a:3c:af:35:07:c3 brd ff:ff:ff:ff:ff:ff
But the batman-adv code to walk through the various layers of virtual
interfaces uses this assumption because dev_get_iflink handles it
internally and doesn't return the actual netns of the iflink. And
dev_get_iflink only documents the situation where ifindex == iflink for
physical devices.
But only checking for dev->netdev_ops->ndo_get_iflink is also not an option
because ipoib_get_iflink implements it even when it sometimes returns an
iflink != ifindex and sometimes iflink == ifindex. The caller must
therefore make sure itself to check both netns and iflink + ifindex for
equality. Only when they are equal, a "physical" interface was detected
which should stop the traversal. On the other hand, vxcan_get_iflink can
also return 0 in case there was currently no valid peer. In this case, it
is still necessary to stop.
Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_get_real_netdevice. And since some of the
ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.
Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_is_on_batman_iface. And since some of the
.ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.
Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
When the DSA_NOTIFIER_TAG_PROTO returns an error, the user space process
which initiated the protocol change exits the kernel processing while
still holding the rtnl_mutex. So any other process attempting to lock
the rtnl_mutex would deadlock after such event.
The error handling of DSA_NOTIFIER_TAG_PROTO was inadvertently changed
by the blamed commit, introducing this regression. We must still call
rtnl_unlock(), and we must still call DSA_NOTIFIER_TAG_PROTO for the old
protocol. The latter is due to the limiting design of notifier chains
for cross-chip operations, which don't have a built-in error recovery
mechanism - we should look into using notifier_call_chain_robust for that.
Fixes: dc452a471dba ("net: dsa: introduce tagger-owned storage for private and shared data")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220228141715.146485-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A number of places in the MGMT handlers we examine the command queue for
other commands (in progress but not yet complete) that will interact
with the process being performed. However, not all commands go into the
queue if one of:
1. There is no negative side effect of consecutive or redundent commands
2. The command is entirely perform "inline".
This change examines each "pending command" check, and if it is not
needed, deletes the check. Of the remaining pending command checks, we
make sure that the command is in the pending queue by using the
mgmt_pending_add/mgmt_pending_remove pair rather than the
mgmt_pending_new/mgmt_pending_free pair.
Link: https://lore.kernel.org/linux-bluetooth/f648f2e11bb3c2974c32e605a85ac3a9fac944f1.camel@redhat.com/T/
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
After cited commit optimizted hw insertion, flow table entries are
populated with ifindex information which was intended to only be used
for HW offload. This tuple ifindex is hashed in the flow table key, so
it must be filled for lookup to be successful. But tuple ifindex is only
relevant for the netfilter flowtables (nft), so it's not filled in
act_ct flow table lookup, resulting in lookup failure, and no SW
offload and no offload teardown for TCP connection FIN/RST packets.
To fix this, add new tc ifindex field to tuple, which will
only be used for offloading, not for lookup, as it will not be
part of the tuple hash.
Fixes: 9795ded7f924 ("net/sched: act_ct: Fill offloading tuple iifidx")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Partially revert commit 5f501d555653 ("binfmt_elf: reintroduce using
MAP_FIXED_NOREPLACE"), which applied the ET_DYN "total_mapping_size"
logic also to ET_EXEC.
At least ia64 has ET_EXEC PT_LOAD segments that are not virtual-address
contiguous (but _are_ file-offset contiguous). This would result in a
giant mapping attempting to cover the entire span, including the virtual
address range hole, and well beyond the size of the ELF file itself,
causing the kernel to refuse to load it. For example:
$ readelf -lW /usr/bin/gcc
...
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz ...
...
LOAD 0x000000 0x4000000000000000 0x4000000000000000 0x00b5a0 0x00b5a0 ...
LOAD 0x00b5a0 0x600000000000b5a0 0x600000000000b5a0 0x0005ac 0x000710 ...
...
^^^^^^^^ ^^^^^^^^^^^^^^^^^^ ^^^^^^^^ ^^^^^^^^
File offset range : 0x000000-0x00bb4c
0x00bb4c bytes
Virtual address range : 0x4000000000000000-0x600000000000bcb0
0x200000000000bcb0 bytes
Remove the total_mapping_size logic for ET_EXEC, which reduces the
ET_EXEC MAP_FIXED_NOREPLACE coverage to only the first PT_LOAD (better
than nothing), and retains it for ET_DYN.
Ironically, this is the reverse of the problem that originally caused
problems with MAP_FIXED_NOREPLACE: overlapping PT_LOAD segments. Future
work could restore full coverage if load_elf_binary() were to perform
mappings in a separate phase from the loading (where it could resolve
both overlaps and holes).
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Reported-by: matoro <matoro_bugzilla_kernel@matoro.tk>
Fixes: 5f501d555653 ("binfmt_elf: reintroduce using MAP_FIXED_NOREPLACE")
Link: https://lore.kernel.org/r/a3edd529-c42d-3b09-135c-7e98a15b150f@leemhuis.info
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Link: https://lore.kernel.org/lkml/ce8af9c13bcea9230c7689f3c1e0e2cd@matoro.tk
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/49182d0d-708b-4029-da5f-bc18603440a6@physik.fu-berlin.de
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The kbuild change here accidentally removed not only the
unquoting, but also the last character of the variable
name. Fix that.
Fixes: 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf")
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In case someone combines bpf socket assign and nf_queue, then we will
queue an skb who references a struct sock that did not have its
reference count incremented.
As we leave rcu protection, there is no guarantee that skb->sk is still
valid.
For refcount-less skb->sk case, try to increment the reference count
and then override the destructor.
In case of failure we have two choices: orphan the skb and 'delete'
preselect or let nf_queue() drop the packet.
Do the latter, it should not happen during normal operation.
Fixes: cf7fbe660f2d ("bpf: Add socket assign support")
Acked-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Eric Dumazet says:
The sock_hold() side seems suspect, because there is no guarantee
that sk_refcnt is not already 0.
On failure, we cannot queue the packet and need to indicate an
error. The packet will be dropped by the caller.
v2: split skb prefetch hunk into separate change
Fixes: 271b72c7fa82c ("udp: RCU handling for Unicast packets.")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
causes:
BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80
Write of size 4 at addr ffff888106df0284 by task nf-queue/1459
sk_free+0x25/0x80
nf_queue_entry_release_refs+0x143/0x1a0
nf_reinject+0x233/0x770
... without 'netfilter: nf_queue: don't assume sk is full socket'.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
There is no guarantee that state->sk refers to a full socket.
If refcount transitions to 0, sock_put calls sk_free which then ends up
with garbage fields.
I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable
debug work and pointing out state->sk oddities.
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
When we get anti-clogging token required (added by the commit
mentioned below), or the other status codes added by the later
commit 4e56cde15f7d ("mac80211: Handle special status codes in
SAE commit") we currently just pretend (towards the internal
state machine of authentication) that we didn't receive anything.
This has the undesirable consequence of retransmitting the prior
frame, which is not expected, because the timer is still armed.
If we just disarm the timer at that point, it would result in
the undesirable side effect of being in this state indefinitely
if userspace crashes, or so.
So to fix this, reset the timer and set a new auth_data->waiting
in order to have no more retransmissions, but to have the data
destroyed when the timer actually fires, which will only happen
if userspace didn't continue (i.e. crashed or abandoned it.)
Fixes: a4055e74a2ff ("mac80211: Don't destroy auth data in case of anti-clogging")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As there's potential for failure of the nla_memdup(),
check the return value.
Fixes: a442b761b24b ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When "debugfs=off" is used on the kernel command line, iwiwifi's
mvm module uses an invalid/unchecked debugfs_dir pointer and causes
a BUG:
BUG: kernel NULL pointer dereference, address: 000000000000004f
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 503 Comm: modprobe Tainted: G W 5.17.0-rc5 #7
Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021
RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm]
Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73
RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246
RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328
RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c
RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620
R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000
R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320
FS: 00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm]
iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm]
iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm]
_iwl_op_mode_start+0x6f/0xd0 [iwlwifi]
iwl_opmode_register+0x6a/0xe0 [iwlwifi]
? 0xffffffffa0231000
iwl_mvm_init+0x35/0x1000 [iwlmvm]
? 0xffffffffa0231000
do_one_initcall+0x5a/0x1b0
? kmem_cache_alloc+0x1e5/0x2f0
? do_init_module+0x1e/0x220
do_init_module+0x48/0x220
load_module+0x2602/0x2bc0
? __kernel_read+0x145/0x2e0
? kernel_read_file+0x229/0x290
__do_sys_finit_module+0xc5/0x130
? __do_sys_finit_module+0xc5/0x130
__x64_sys_finit_module+0x13/0x20
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f64dda564dd
Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd
RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001
RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002
R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2
R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018
</TASK>
Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev
CR2: 000000000000004f
---[ end trace 0000000000000000 ]---
Check the debugfs_dir pointer for an error before using it.
Fixes: 8c082a99edb9 ("iwlwifi: mvm: simplify iwl_mvm_dbgfs_register")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220223030630.23241-1-rdunlap@infradead.org
[change to make both conditional]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some APs misbehave when TWT is used and cause our firmware to crash.
We don't know a reasonable way to detect and work around this problem
in the FW yet. To prevent these crashes, disable TWT in the driver by
stopping to advertise TWT support.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
[reworded the commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If CONFIG_RFKILL is not set, the Intel WiFi driver will not build
the iw_mvm driver part due to the missing rfill_soft_blocked()
call. Adding a inline declaration of rfill_soft_blocked() if
CONFIG_RFKILL=n fixes the following error:
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h: In function 'iwl_mvm_mei_set_sw_rfkill_state':
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:2215:38: error: implicit declaration of function 'rfkill_soft_blocked'; did you mean 'rfkill_blocked'? [-Werror=implicit-function-declaration]
2215 | mvm->hw_registered ? rfkill_soft_blocked(mvm->hw->wiphy->rfkill) : false;
| ^~~~~~~~~~~~~~~~~~~
| rfkill_blocked
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reported-by: Neill Whillans <neill.whillans@codethink.co.uk>
Fixes: 5bc9a9dd7535 ("rfkill: allow to get the software rfkill state")
Link: https://lore.kernel.org/r/20220218093858.1245677-1-ben.dooks@codethink.co.uk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It was the intention to reverse the bits, not make them all zero by
using logical NOT operator.
Fixes: cc19db8b312a ("MIPS: ralink: mt7621: do memory detection on KSEG1")
Suggested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp,
NVM checksum update is still possible.
Emit a more detailed warning message.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663
Fixes: 4051f68318ca ("e1000e: Do not take care about recovery NVM checksum")
Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY
LAN connected device (LCD) reset during power management flows. This
fixes possible HW unit hangs on the s0ix exit on some corporate ADL
platforms.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Netfilter assumes its called with rcu_read_lock held, but in egress
hook case it may be called with BH readlock.
This triggers lockdep splat.
In order to avoid to change all rcu_dereference() to
rcu_dereference_check(..., rcu_read_lock_bh_held()), wrap nf_hook_slow
with read lock/unlock pair.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We must not dereference @new_hooks after nf_hook_mutex has been released,
because other threads might have freed our allocated hooks already.
BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline]
BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430
CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
hooks_validate net/netfilter/core.c:171 [inline]
__nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024
rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084
__sys_setsockopt+0x2db/0x610 net/socket.c:2180
__do_sys_setsockopt net/socket.c:2191 [inline]
__se_sys_setsockopt net/socket.c:2188 [inline]
__x64_sys_setsockopt+0xba/0x150 net/socket.c:2188
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f65a1ace7d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9
RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130
R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000
</TASK>
The buggy address belongs to the page:
page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993
prep_new_page mm/page_alloc.c:2434 [inline]
get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
__alloc_pages_node include/linux/gfp.h:572 [inline]
alloc_pages_node include/linux/gfp.h:595 [inline]
kmalloc_large_node+0x62/0x130 mm/slub.c:4438
__kmalloc_node+0x35a/0x4a0 mm/slub.c:4454
kmalloc_node include/linux/slab.h:604 [inline]
kvmalloc_node+0x97/0x100 mm/util.c:580
kvmalloc include/linux/slab.h:731 [inline]
kvzalloc include/linux/slab.h:739 [inline]
allocate_hook_entries_size net/netfilter/core.c:61 [inline]
nf_hook_entries_grow+0x140/0x780 net/netfilter/core.c:128
__nf_register_net_hook+0x144/0x820 net/netfilter/core.c:429
nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1352 [inline]
free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404
free_unref_page_prepare mm/page_alloc.c:3325 [inline]
free_unref_page+0x19/0x690 mm/page_alloc.c:3404
kvfree+0x42/0x50 mm/util.c:613
rcu_do_batch kernel/rcu/tree.c:2527 [inline]
rcu_core+0x7b1/0x1820 kernel/rcu/tree.c:2778
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
Memory state around the buggy address:
ffff88801c1a7f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88801c1a7f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88801c1a8000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88801c1a8080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88801c1a8100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes: 2420b79f8c18 ("netfilter: debug: check for sorted array")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Similar to "igc_read_phy_reg_gpy: drop premature return" patch.
igc_write_phy_reg_gpy checks the return value from igc_write_phy_reg_mdic
and if it's not 0, returns immediately. By doing this, it leaves the HW
semaphore in the acquired state.
Drop this premature return statement, the function returns after
releasing the semaphore immediately anyway.
Fixes: 5586838fe9ce ("igc: Add code for PHY support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Reported-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
igc_read_phy_reg_gpy checks the return value from igc_read_phy_reg_mdic
and if it's not 0, returns immediately. By doing this, it leaves the HW
semaphore in the acquired state.
Drop this premature return statement, the function returns after
releasing the semaphore immediately anyway.
Fixes: 5586838fe9ce ("igc: Add code for PHY support")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
Robert Hancock
Eric Dumazet
Vladimir Oltean
Maciej Fijalkowski
Amit Cohen
Christophe JAILLET
Niels Dossche
Luiz Augusto von Dentz
Hans de Goede
D. Wythe
Zheyu Ma
Alex Elder
lena wang
Andy Shevchenko
Emmanuel Grumbach
Sreeramya Soratkal
Randy Dunlap
Jonathan Lemon
Gao Xiang
Sven Eckelmann
Brian Gix
Paul Blakey
Kees Cook
Johannes Berg
Florian Westphal
Jiasheng Jiang
Golan Ben Ami
Ben Dooks
Ilya Lipnitskiy
Sasha Neftin
Corinna Vinschen