aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-18cpufreq: remove setting of policy->cpu in policy->cpus during initSudeep Holla2-2/+0
policy->cpu is copied into policy->cpus in cpufreq_online() before calling into cpufreq_driver->init(). So there's no need to set the same in the individual driver init() functions again. This patch removes the redundant setting of policy->cpu in policy->cpus in intel_pstate and cppc drivers. Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10cpufreq: mediatek: add support of cpufreq to MT7622 SoCSean Wang1-0/+1
MT7622 is a 64-bit ARMv8 based dual-core SoC (2 * Cortex-A53) with a single cluster. The hardware is also compatible with the current driver, so add MT7622 as one of the compatible string list. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10cpufreq: mediatek: add cleanups with the more generic namingSean Wang1-13/+13
Since more MediaTek SoCs can be supported with the cpufreq driver and not limited to MT8173, a couple of cleanups are done here with renaming those functions and related structures with "mtk" instead of "mt8173". Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-08cpufreq: rcar: Add support for R8A7795 SoCKhiem Nguyen1-0/+1
After the commit "a399dc9fc50 cpufreq: shmobile: Use generic platdev driver", will use cpufreq-dt-platdev driver to enable cpufreq-dt support. Hence, follow the implementation to support new R8A7795 SoC. Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-04cpufreq: dt: Add rk3328 compatible to use generic cpufreq driverFinley Xiao1-0/+1
This patch adds the rk3328 compatible string for supporting the generic cpufreq driver on RK3328. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: s5pv210: add missing of_node_put()Julia Lawall1-0/+3
for_each_compatible_node performs an of_node_get on each iteration, so a return from the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e,e1,e2; statement S; iterator i1; iterator name for_each_compatible_node; @@ for_each_compatible_node(n,e1,e2) { ... ( of_node_put(n); | e = n | return n; | i1(...,n,...) S | + of_node_put(n); ? return ...; ) ... } // </smpl> Additionally, call of_node_put on the previous value of np, obtained from of_find_compatible_node, that is no longer accessible at the point of the for_each_compatible_node. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latencyViresh Kumar1-2/+1
With the recent updates, CPUFREQ_ETERNAL is only used by the drivers which don't know their transition latency but want to use dynamic switching. Anyway, the routine cpufreq_policy_transition_delay_us() caps the value of transition latency to 10 ms now and that can be used safely with such platforms. Remove the check from cpufreq_init_governor() and allow dynamic switching for such configurations as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: Add CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING cpufreq driver flagViresh Kumar11-18/+26
The policy->transition_latency field is used for multiple purposes today and its not straight forward at all. This is how it is used: A. Set the correct transition_latency value. B. Set it to CPUFREQ_ETERNAL because: 1. We don't want automatic dynamic switching (with ondemand/conservative) to happen at all. 2. We don't know the transition latency. This patch handles the B.1. case in a more readable way. A new flag for the cpufreq drivers is added to disallow use of cpufreq governors which have dynamic_switching flag set. All the current cpufreq drivers which are setting transition_latency unconditionally to CPUFREQ_ETERNAL are updated to use it. They don't need to set transition_latency anymore. There shouldn't be any functional change after this patch. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: schedutil: Set dynamic_switching to trueViresh Kumar1-0/+1
Set dynamic_switching to 'true' to disallow use of schedutil governor for platforms with transition_latency set to CPUFREQ_ETERNAL, as they may not want to do automatic dynamic frequency switching. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: Replace "max_transition_latency" with "dynamic_switching"Viresh Kumar3-12/+7
There is no limitation in the ondemand or conservative governors which disallow the transition_latency to be greater than 10 ms. The max_transition_latency field is rather used to disallow automatic dynamic frequency switching for platforms which didn't wanted these governors to run. Replace max_transition_latency with a boolean (dynamic_switching) and check for transition_latency == CPUFREQ_ETERNAL along with that. This makes it pretty straight forward to read/understand now. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: arm_big_little: Make ->get_transition_latency() mandatoryViresh Kumar1-6/+4
All users of arm_big_little driver are defining it and there is no need to keep it optional. Make it mandatory to remove the always true conditional statement. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: Don't set transition_latency for setpolicy driversViresh Kumar2-2/+0
The transition_latency field isn't used for drivers with ->setpolicy() callback present and there is no point setting it from the drivers. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: Use transition_delay_us for legacy governors as wellViresh Kumar4-18/+18
The policy->transition_delay_us field is used only by the schedutil governor currently, and this field describes how fast the driver wants the cpufreq governor to change CPUs frequency. It should rather be a common thing across all governors, as it doesn't have any schedutil dependency here. Create a new helper cpufreq_policy_transition_delay_us() to get the transition delay across all governors. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: governor: Drop min_sampling_rateViresh Kumar6-37/+2
The cpufreq core and governors aren't supposed to set a limit on how fast we want to try changing the frequency. This is currently done for the legacy governors with help of min_sampling_rate. At worst, we may end up setting the sampling rate to a value lower than the rate at which frequency can be changed and then one of the CPUs in the policy will be only changing frequency for ever. But that is something for the user to decide and there is no need to have special handling for such cases in the core. Leave it for the user to figure out. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: dt: Don't use generic platdev driver for tangoMarc Gonzalez5-3/+44
On tango platforms, firmware configures the CPU clock, and Linux is then only allowed to use the cpu_clk_divider to change the frequency. Build the OPP table dynamically at init, in order to support whatever firmware throws at us. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22dt-bindings: cpufreq: enhance MediaTek cpufreq dt-binding documentSean Wang1-3/+167
Update binding document with adding operating-points-v2 as the required property and the cooling level as the optional properties and adding more examples guiding people how to use MediaTek cpufreq driver for MediaTek SoCs. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22dt-bindings: cpufreq: move MediaTek cpufreq dt-bindings document to proper placeSean Wang1-0/+0
The old place is Documentation/devicetree/bindings/clock/ that would let people hard to find how to use MediaTek cpufreq driver, so moving it to the appropriate place as other cpufreq drivers done would be better. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoCSean Wang3-5/+6
MT2701/MT7623 is a 32-bit ARMv7 based quad-core (4 * Cortex-A7) with single cluster and this hardware is also compatible with the existing driver through enabling CPU frequency feature with operating-points-v2 bindings. Also, this driver actually supports all MediaTek SoCs, the Kconfig menu entry and file name itself should be updated with more generic name to drop "MT8173" Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-16cpufreq: dt: Add zynqmp to the cpufreq dt platdevShubhrajyoti Datta1-0/+1
Add zynqmp to the cpufreq dt platform device. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-16cpufreq: speedstep: remove unnecessary static in speedstep_detect_chipset()Gustavo A. R. Silva1-1/+1
Remove unnecessary static on local variable hostbridge. Such variable is initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the code size. This issue was detected using Coccinelle and the following semantic patch: @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; In the following log you can see the difference in the code size. Also, there is a significant difference in the bss segment. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 5084 3392 256 8732 221c drivers/cpufreq/speedstep-ich.o after: text data bss dec hex filename 5062 3304 192 8558 216e drivers/cpufreq/speedstep-ich.o Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-15Linux v4.13-rc1Linus Torvalds1-2/+2
2017-07-15random: reorder READ_ONCE() in get_random_uXXSebastian Andrzej Siewior1-2/+4
Avoid the READ_ONCE in commit 4a072c71f49b ("random: silence compiler warnings and fix race") if we can leave the function after arch_get_random_XXX(). Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-07-15random: suppress spammy warnings about unseeded randomnessTheodore Ts'o2-23/+57
Unfortunately, on some models of some architectures getting a fully seeded CRNG is extremely difficult, and so this can result in dmesg getting spammed for a surprisingly long time. This is really bad from a security perspective, and so architecture maintainers really need to do what they can to get the CRNG seeded sooner after the system is booted. However, users can't do anything actionble to address this, and spamming the kernel messages log will only just annoy people. For developers who want to work on improving this situation, CONFIG_WARN_UNSEEDED_RANDOM has been renamed to CONFIG_WARN_ALL_UNSEEDED_RANDOM. By default the kernel will always print the first use of unseeded randomness. This way, hopefully the security obsessed will be happy that there is _some_ indication when the kernel boots there may be a potential issue with that architecture or subarchitecture. To see all uses of unseeded randomness, developers can enable CONFIG_WARN_ALL_UNSEEDED_RANDOM. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-07-14replace incorrect strscpy use in FORTIFY_SOURCEDaniel Micay1-11/+12
Using strscpy was wrong because FORTIFY_SOURCE is passing the maximum possible size of the outermost object, but strscpy defines the count parameter as the exact buffer size, so this could copy past the end of the source. This would still be wrong with the planned usage of __builtin_object_size(p, 1) for intra-object overflow checks since it's the maximum possible size of the specified object with no guarantee of it being that large. Reuse of the fortified functions like this currently makes the runtime error reporting less precise but that can be improved later on. Noticed by Dave Jones and KASAN. Signed-off-by: Daniel Micay <danielmicay@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14kmod: throttle kmod thread limitLuis R. Rodriguez2-31/+9
If we reach the limit of modprobe_limit threads running the next request_module() call will fail. The original reason for adding a kill was to do away with possible issues with in old circumstances which would create a recursive series of request_module() calls. We can do better than just be super aggressive and reject calls once we've reached the limit by simply making pending callers wait until the threshold has been reduced, and then throttling them in, one by one. This throttling enables requests over the kmod concurrent limit to be processed once a pending request completes. Only the first item queued up to wait is woken up. The assumption here is once a task is woken it will have no other option to also kick the queue to check if there are more pending tasks -- regardless of whether or not it was successful. By throttling and processing only max kmod concurrent tasks we ensure we avoid unexpected fatal request_module() calls, and we keep memory consumption on module loading to a minimum. With x86_64 qemu, with 4 cores, 4 GiB of RAM it takes the following run time to run both tests: time ./kmod.sh -t 0008 real 0m16.366s user 0m0.883s sys 0m8.916s time ./kmod.sh -t 0009 real 0m50.803s user 0m0.791s sys 0m9.852s Link: http://lkml.kernel.org/r/20170628223155.26472-4-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14kmod: add test driver to stress test the module loaderLuis R. Rodriguez7-0/+1929
This adds a new stress test driver for kmod: the kernel module loader. The new stress test driver, test_kmod, is only enabled as a module right now. It should be possible to load this as built-in and load tests early (refer to the force_init_test module parameter), however since a lot of test can get a system out of memory fast we leave this disabled for now. Using a system with 1024 MiB of RAM can *easily* get your kernel OOM fast with this test driver. The test_kmod driver exposes API knobs for us to fine tune simple request_module() and get_fs_type() calls. Since these API calls only allow each one parameter a test driver for these is rather simple. Other factors that can help out test driver though are the number of calls we issue and knowing current limitations of each. This exposes configuration as much as possible through userspace to be able to build tests directly from userspace. Since it allows multiple misc devices its will eventually (once we add a knob to let us create new devices at will) also be possible to perform more tests in parallel, provided you have enough memory. We only enable tests we know work as of right now. Demo screenshots: # tools/testing/selftests/kmod/kmod.sh kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0002_driver: OK! - loading kmod test kmod_test_0002_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0002_fs: OK! - loading kmod test kmod_test_0002_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0003: OK! - loading kmod test kmod_test_0003: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0004: OK! - loading kmod test kmod_test_0004: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS XXX: add test restult for 0007 Test completed You can also request for specific tests: # tools/testing/selftests/kmod/kmod.sh -t 0001 kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL Test completed Lastly, the current available number of tests: # tools/testing/selftests/kmod/kmod.sh --help Usage: tools/testing/selftests/kmod/kmod.sh [ -t <4-number-digit> ] Valid tests: 0001-0009 0001 - Simple test - 1 thread for empty string 0002 - Simple test - 1 thread for modules/filesystems that do not exist 0003 - Simple test - 1 thread for get_fs_type() only 0004 - Simple test - 2 threads for get_fs_type() only 0005 - multithreaded tests with default setup - request_module() only 0006 - multithreaded tests with default setup - get_fs_type() only 0007 - multithreaded tests with default setup test request_module() and get_fs_type() 0008 - multithreaded - push kmod_concurrent over max_modprobes for request_module() 0009 - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type() The following test cases currently fail, as such they are not currently enabled by default: # tools/testing/selftests/kmod/kmod.sh -t 0008 # tools/testing/selftests/kmod/kmod.sh -t 0009 To be sure to run them as intended please unload both of the modules: o test_module o xfs And ensure they are not loaded on your system prior to testing them. If you use these paritions for your rootfs you can change the default test driver used for get_fs_type() by exporting it into your environment. For example of other test defaults you can override refer to kmod.sh allow_user_defaults(). Behind the scenes this is how we fine tune at a test case prior to hitting a trigger to run it: cat /sys/devices/virtual/misc/test_kmod0/config echo -n "2" > /sys/devices/virtual/misc/test_kmod0/config_test_case echo -n "ext4" > /sys/devices/virtual/misc/test_kmod0/config_test_fs echo -n "80" > /sys/devices/virtual/misc/test_kmod0/config_num_threads cat /sys/devices/virtual/misc/test_kmod0/config echo -n "1" > /sys/devices/virtual/misc/test_kmod0/config_num_threads Finally to trigger: echo -n "1" > /sys/devices/virtual/misc/test_kmod0/trigger_config The kmod.sh script uses the above constructs to build different test cases. A bit of interpretation of the current failures follows, first two premises: a) When request_module() is used userspace figures out an optimized version of module order for us. Once it finds the modules it needs, as per depmod symbol dep map, it will finit_module() the respective modules which are needed for the original request_module() request. b) We have an optimization in place whereby if a kernel uses request_module() on a module already loaded we never bother userspace as the module already is loaded. This is all handled by kernel/kmod.c. A few things to consider to help identify root causes of issues: 0) kmod 19 has a broken heuristic for modules being assumed to be built-in to your kernel and will return 0 even though request_module() failed. Upgrade to a newer version of kmod. 1) A get_fs_type() call for "xfs" will request_module() for "fs-xfs", not for "xfs". The optimization in kernel described in b) fails to catch if we have a lot of consecutive get_fs_type() calls. The reason is the optimization in place does not look for aliases. This means two consecutive get_fs_type() calls will bump kmod_concurrent, whereas request_module() will not. This one explanation why test case 0009 fails at least once for get_fs_type(). 2) If a module fails to load --- for whatever reason (kmod_concurrent limit reached, file not yet present due to rootfs switch, out of memory) we have a period of time during which module request for the same name either with request_module() or get_fs_type() will *also* fail to load even if the file for the module is ready. This explains why *multiple* NULLs are possible on test 0009. 3) finit_module() consumes quite a bit of memory. 4) Filesystems typically also have more dependent modules than other modules, its important to note though that even though a get_fs_type() call does not incur additional kmod_concurrent bumps, since userspace loads dependencies it finds it needs via finit_module_fd(), it *will* take much more memory to load a module with a lot of dependencies. Because of 3) and 4) we will easily run into out of memory failures with certain tests. For instance test 0006 fails on qemu with 1024 MiB of RAM. It panics a box after reaping all userspace processes and still not having enough memory to reap. [arnd@arndb.de: add dependencies for test module] Link: http://lkml.kernel.org/r/20170630154834.3689272-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170628223155.26472-3-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14MAINTAINERS: give kmod some maintainer loveLuis R. Rodriguez1-0/+7
As suggested by Jessica, I've been actively working on kmod, so might as well reflect its maintained status. Changes are expected to go through akpm's tree. Link: http://lkml.kernel.org/r/20170628223155.26472-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Suggested-by: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14xtensa: use generic fb.hTobias Klauser2-12/+1
The arch uses a verbatim copy of the asm-generic version and does not add any own implementations to the header, so use asm-generic/fb.h instead of duplicating code. Link: http://lkml.kernel.org/r/20170517083545.2115-1-tklauser@distanz.ch Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: add /proc/<pid>/fail-nthAkinobu Mita2-1/+3
fail-nth interface is only created in /proc/self/task/<current-tid>/. This change also adds it in /proc/<pid>/. This makes shell based tool a bit simpler. $ bash -c "builtin echo 100 > /proc/self/fail-nth && exec ls /" Link: http://lkml.kernel.org/r/1491490561-10485-6-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: simplify access check for fail-nthAkinobu Mita2-17/+15
The fail-nth file is created with 0666 and the access is permitted if and only if the task is current. This file is owned by the currnet user. So we can create it with 0644 and allow the owner to write it. This enables to watch the status of task->fail_nth from another processes. [akinobu.mita@gmail.com: don't convert unsigned type value as signed int] Link: http://lkml.kernel.org/r/1492444483-9239-1-git-send-email-akinobu.mita@gmail.com [akinobu.mita@gmail.com: avoid unwanted data race to task->fail_nth] Link: http://lkml.kernel.org/r/1499962492-8931-1-git-send-email-akinobu.mita@gmail.com Link: http://lkml.kernel.org/r/1491490561-10485-5-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: make fail-nth read/write interface symmetricAkinobu Mita2-14/+13
The read interface for fail-nth looks a bit odd. Read from this file returns "NYYYY..." or "YYYYY..." (this makes me surprise when cat this file). Because there is no EOF condition. The first character indicates current->fail_nth is zero or not, and then current->fail_nth is reset to zero. Just returning task->fail_nth value is more natural to understand. Link: http://lkml.kernel.org/r/1491490561-10485-4-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: parse as natural 1-based value for fail-nth write interfaceAkinobu Mita3-10/+8
The value written to fail-nth file is parsed as 0-based. Parsing as one-based is more natural to understand and it enables to cancel the previous setup by simply writing '0'. This change also converts task->fail_nth from signed to unsigned int. Link: http://lkml.kernel.org/r/1491490561-10485-3-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14fault-inject: automatically detect the number base for fail-nth write interfaceAkinobu Mita1-1/+1
Automatically detect the number base to use when writing to fail-nth file instead of always parsing as a decimal number. Link: http://lkml.kernel.org/r/1491490561-10485-2-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14kernel/watchdog.c: use better pr_fmt prefixKefeng Wang1-1/+1
After commit 73ce0511c436 ("kernel/watchdog.c: move hardlockup detector to separate file"), 'NMI watchdog' is inappropriate in kernel/watchdog.c, using 'watchdog' only. Link: http://lkml.kernel.org/r/1499928642-48983-1-git-send-email-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Babu Moger <babu.moger@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14MAINTAINERS: move the befs tree to kernel.orgLuis de Bethencourt1-2/+2
Update the location of the befs git tree and my email address. Link: http://lkml.kernel.org/r/20170709110012.2991-1-luisbg@kernel.org Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an intMichael Ellerman1-0/+7
atomic64_inc_not_zero() returns a "truth value" which in C is traditionally an int. That means callers are likely to expect the result will fit in an int. If an implementation returns a "true" value which does not fit in an int, then there's a possibility that callers will truncate it when they store it in an int. In fact this happened in practice, see commit 966d2b04e070 ("percpu-refcount: fix reference leak during percpu-atomic transition"). So add a test that the result fits in an int, even when the input doesn't. This catches the case where an implementation just passes the non-zero input value out as the result. Link: http://lkml.kernel.org/r/1499775133-1231-1-git-send-email-mpe@ellerman.id.au Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14mm: fix overflow check in expand_upwards()Helge Deller1-1/+1
Jörn Engel noticed that the expand_upwards() function might not return -ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE. Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa which all define TASK_SIZE as 0xffffffff, but since none of those have an upwards-growing stack we currently have no actual issue. Nevertheless let's fix this just in case any of the architectures with an upward-growing stack (currently parisc, metag and partly ia64) define TASK_SIZE similar. Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box Fixes: bd726c90b6b8 ("Allow stack to grow up to address space limit") Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Jörn Engel <joern@purestorage.com> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14ubifs: Set double hash cookie also for RENAME_EXCHANGERichard Weinberger1-0/+2
We developed RENAME_EXCHANGE and UBIFS_FLG_DOUBLE_HASH more or less in parallel and this case was forgotten. :-( Cc: stable@vger.kernel.org Fixes: d63d61c16972 ("ubifs: Implement UBIFS_FLG_DOUBLE_HASH") Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrsXiaolei Li3-11/+15
The inode is not locked in init_xattrs when creating a new inode. Without this patch, there will occurs assert when booting or creating a new file, if the kernel config CONFIG_SECURITY_SMACK is enabled. Log likes: UBIFS assert failed in ubifs_xattr_set at 298 (pid 1156) CPU: 1 PID: 1156 Comm: ldconfig Tainted: G S 4.12.0-rc1-207440-g1e70b02 #2 Hardware name: MediaTek MT2712 evaluation board (DT) Call trace: [<ffff000008088538>] dump_backtrace+0x0/0x238 [<ffff000008088834>] show_stack+0x14/0x20 [<ffff0000083d98d4>] dump_stack+0x9c/0xc0 [<ffff00000835d524>] ubifs_xattr_set+0x374/0x5e0 [<ffff00000835d7ec>] init_xattrs+0x5c/0xb8 [<ffff000008385788>] security_inode_init_security+0x110/0x190 [<ffff00000835e058>] ubifs_init_security+0x30/0x68 [<ffff00000833ada0>] ubifs_mkdir+0x100/0x200 [<ffff00000820669c>] vfs_mkdir+0x11c/0x1b8 [<ffff00000820b73c>] SyS_mkdirat+0x74/0xd0 [<ffff000008082f8c>] __sys_trace_return+0x0/0x4 Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Don't leak kernel memory to the MTDRichard Weinberger1-5/+5
When UBIFS prepares data structures which will be written to the MTD it ensues that their lengths are multiple of 8. Since it uses kmalloc() the padded bytes are left uninitialized and we leak a few bytes of kernel memory to the MTD. To make sure that all bytes are initialized, let's switch to kzalloc(). Kzalloc() is fine in this case because the buffers are not huge and in the IO path the performance bottleneck is anyway the MTD. Cc: stable@vger.kernel.org Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Change gfp flags in page allocation for bulk readHyunchul Lee1-2/+2
In low memory situations, page allocations for bulk read can kill applications for reclaiming memory, and print an failure message when allocations are failed. Because bulk read is just an optimization, we don't have to do these and can stop page allocations. Though this siutation happens rarely, add __GFP_NORETRY to prevent from excessive memory reclaim and killing applications, and __GFP_WARN to suppress this failure message. For this, Use readahead_gfp_mask for gfp flags when allocating pages. Signed-off-by: Hyunchul Lee <cheol.lee@lge.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Fix oops when remounting with no_bulk_read.karam.lee1-0/+2
When remounting with the no_bulk_read option, there is a problem accessing the "bulk_read buffer(bu.buf)" which has already been freed. If the bulk_read option is enabled, ubifs_tnc_bulk_read uses the pre-allocated bu.buf. While bu.buf is being used by ubifs_tnc_bulk_read, remounting with no_bulk_read frees bu.buf. So I added code to check the use of "bu.buf" to avoid this situation. ------ I tested as follows(kernel v3.18) : Use the script to repeat "no_bulk_read <-> bulk_read" remount.sh #!/bin/sh while true do; mount -o remount,no_bulk_read ${MOUNT_POINT}; sleep 1; mount -o remount,bulk_read ${MOUNT_POINT}; sleep 1; done Perform read operation cat ${MOUNT_POINT}/* > /dev/null The problem is reproduced immediately. [ 234.256845][kernel.0]Internal error: Oops: 17 [#1] PREEMPT ARM [ 234.258557][kernel.0]CPU: 0 PID: 2752 Comm: cat Tainted: G W O 3.18.31+ #51 [ 234.259531][kernel.0]task: cbff8580 ti: cbd66000 task.ti: cbd66000 [ 234.260306][kernel.0]PC is at validate_data_node+0x10/0x264 [ 234.260994][kernel.0]LR is at ubifs_tnc_bulk_read+0x388/0x3ec [ 234.261712][kernel.0]pc : [<c01d98fc>] lr : [<c01dc300>] psr: 80000013 [ 234.261712][kernel.0]sp : cbd67ba0 ip : 00000001 fp : 00000000 [ 234.263337][kernel.0]r10: cd3e0260 r9 : c0df2008 r8 : 00000000 [ 234.264087][kernel.0]r7 : cd3e0000 r6 : 00000000 r5 : cd3e0278 r4 : cd3e0000 [ 234.264999][kernel.0]r3 : 00000003 r2 : cd3e0280 r1 : 00000000 r0 : cd3e0000 [ 234.265910][kernel.0]Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 234.266896][kernel.0]Control: 10c53c7d Table: 8c40c059 DAC: 00000015 [ 234.267711][kernel.0]Process cat (pid: 2752, stack limit = 0xcbd66400) [ 234.268525][kernel.0]Stack: (0xcbd67ba0 to 0xcbd68000) [ 234.269169][kernel.0]7ba0: cd7c3940 c03d8650 0001bfe0 00002ab2 00000000 cbd67c5c cbd67c58 0001bfe0 [ 234.270287][kernel.0]7bc0: cd3e0000 00002ab2 0001bfe0 00000014 cbd66000 cd3e0260 00000000 c01d6660 [ 234.271403][kernel.0]7be0: 00002ab2 00000000 c82a5800 ffffffff cd3e0298 cd3e0278 00000000 cd3e0000 [ 234.272520][kernel.0]7c00: 00000000 00000000 cd3e0260 c01dc300 00002ab2 00000000 60000013 d663affa [ 234.273639][kernel.0]7c20: cd3e01f0 cd3e01f0 60000013 c09397ec 00000000 cd3e0278 00002ab2 00000000 [ 234.274755][kernel.0]7c40: cd3e0000 c01dbf48 00000014 00000003 00000160 00000015 00000004 d663affa [ 234.275874][kernel.0]7c60: ccdaa978 cd3e0278 cd3e0000 cf32a5f4 ccdaa820 00000044 cbd66000 cd3e0260 [ 234.276992][kernel.0]7c80: 00000003 c01cec84 ccdaa8dc cbd67cc4 cbd67ec0 00000010 ccdaa978 00000000 [ 234.278108][kernel.0]7ca0: 0000015e ccdaa8dc 00000000 00000000 cf32a5d0 00000000 0000015f ccdaa8dc [ 234.279228][kernel.0]7cc0: 00000000 c8488300 0009e5a4 0000000e cbd66000 0000015e cf32a5f4 c0113c04 [ 234.280346][kernel.0]7ce0: 0000009f 0000003c c00098c4 ffffffff 00001000 00000000 000000ad 00000010 [ 234.281463][kernel.0]7d00: 00000038 cd68f580 00000150 c8488360 00000000 cbd67d30 cbd67d70 0000000e [ 234.282579][kernel.0]7d20: 00000010 00000000 c0951874 c0112a9c cf379b60 cf379b84 cf379890 cf3798b4 [ 234.283699][kernel.0]7d40: cf379578 cf37959c cf379380 cf3793a4 cf3790b0 cf3790d4 cf378fd8 cf378ffc [ 234.284814][kernel.0]7d60: cf378f48 cf378f6c cf32a5f4 cf32a5d0 00000000 00001000 00000018 00000000 [ 234.285932][kernel.0]7d80: 00001000 c0050da4 00000000 00001000 cec04c00 00000000 00001000 c0e11328 [ 234.287049][kernel.0]7da0: 00000000 00001000 cbd66000 00000000 00001000 c0012a60 00000000 00001000 [ 234.288166][kernel.0]7dc0: cbd67dd4 00000000 00001000 80000013 00000000 00001000 cd68f580 00000000 [ 234.289285][kernel.0]7de0: 00001000 c915d600 00000000 00001000 cbd67e48 00000000 00001000 00000018 [ 234.290402][kernel.0]7e00: 00000000 00001000 00000000 00000000 00001000 c915d768 c915d768 c0113550 [ 234.291522][kernel.0]7e20: cd68f580 cbd67e48 cd68f580 cb6713c0 00010000 000ac5a4 00000000 001fc5a4 [ 234.292637][kernel.0]7e40: 00000000 c8488300 cbd67ec0 00eb0000 cd68f580 c0113ee4 00000000 cbd67ec0 [ 234.293754][kernel.0]7e60: cd68f580 c8488300 cbd67ec0 00eb0000 cd68f580 00150000 c8488300 00eb0000 [ 234.294874][kernel.0]7e80: 00010000 c0112fd0 00000000 cbd67ec0 cd68f580 00150000 00000000 cd68f580 [ 234.295991][kernel.0]7ea0: cbd67ef0 c011308c 00000000 00000002 cd768850 00010000 00000000 c01133fc [ 234.297110][kernel.0]7ec0: 00150000 00000000 cbd67f50 00000000 00000000 cb6713c0 01000000 cbd67f48 [ 234.298226][kernel.0]7ee0: cbd67f50 c8488300 00000000 c0113204 00010000 01000000 00000000 cb6713c0 [ 234.299342][kernel.0]7f00: 00150000 00000000 cbd67f50 00000000 00000000 00000000 00000000 00000000 [ 234.300462][kernel.0]7f20: cbd67f50 01000000 01000000 cb6713c0 c8488300 c00ebba8 01000000 00000000 [ 234.301577][kernel.0]7f40: c8488300 cb6713c0 00000000 00000000 00000000 00000000 ccdaa820 00000000 [ 234.302697][kernel.0]7f60: 00000000 01000000 00000003 00000001 cbd66000 00000000 00000001 c00ec678 [ 234.303813][kernel.0]7f80: 00000000 00000200 00000000 01000000 01000000 00000000 00000000 000000ef [ 234.304933][kernel.0]7fa0: c000e904 c000e780 01000000 00000000 00000001 00000003 00000000 01000000 [ 234.306049][kernel.0]7fc0: 01000000 00000000 00000000 000000ef 00000001 00000003 01000000 00000001 [ 234.307165][kernel.0]7fe0: 00000000 beafb78c 0000ad08 00128d1c 60000010 00000001 00000000 00000000 [ 234.308292][kernel.0][<c01d98fc>] (validate_data_node) from [<c01dc300>] (ubifs_tnc_bulk_read+0x388/0x3ec) [ 234.309493][kernel.0][<c01dc300>] (ubifs_tnc_bulk_read) from [<c01cec84>] (ubifs_readpage+0x1dc/0x46c) [ 234.310656][kernel.0][<c01cec84>] (ubifs_readpage) from [<c0113c04>] (__generic_file_splice_read+0x29c/0x4cc) [ 234.311890][kernel.0][<c0113c04>] (__generic_file_splice_read) from [<c0113ee4>] (generic_file_splice_read+0xb0/0xf4) [ 234.313214][kernel.0][<c0113ee4>] (generic_file_splice_read) from [<c0112fd0>] (do_splice_to+0x68/0x7c) [ 234.314386][kernel.0][<c0112fd0>] (do_splice_to) from [<c011308c>] (splice_direct_to_actor+0xa8/0x190) [ 234.315544][kernel.0][<c011308c>] (splice_direct_to_actor) from [<c0113204>] (do_splice_direct+0x90/0xb8) [ 234.316741][kernel.0][<c0113204>] (do_splice_direct) from [<c00ebba8>] (do_sendfile+0x17c/0x2b8) [ 234.317838][kernel.0][<c00ebba8>] (do_sendfile) from [<c00ec678>] (SyS_sendfile64+0xc4/0xcc) [ 234.318890][kernel.0][<c00ec678>] (SyS_sendfile64) from [<c000e780>] (ret_fast_syscall+0x0/0x38) [ 234.319983][kernel.0]Code: e92d47f0 e24dd050 e59f9228 e1a04000 (e5d18014) Signed-off-by: karam.lee <karam.lee@lge.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Fail commit if TNC is obviously inconsistentRichard Weinberger1-0/+4
A reference to LEB 0 or with length 0 in the TNC is never correct and could be caused by a memory corruption. Don't write such a bad index node to the MTD. Instead fail the commit which will turn UBIFS into read-only mode. This is less painful than having the bad reference on the MTD from where UBFIS has no chance to recover. Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: allow userspace to map mounts to volumesRabin Vincent1-0/+7
There currently appears to be no way for userspace to find out the underlying volume number for a mounted ubifs file system, since ubifs uses anonymous block devices. The volume name is present in /proc/mounts but UBI volumes can be renamed after the volume has been mounted. To remedy this, show the UBI number and UBI volume number as part of the options visible under /proc/mounts. Also, accept and ignore the ubi= vol= options if they are used mounting (patch from Richard Weinberger). # mount -t ubifs ubi:baz x # mount ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2) # ubirename /dev/ubi0 baz bazz # mount ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2) # ubinfo -d 0 -n 2 Volume ID: 2 (on ubi0) Type: dynamic Alignment: 1 Size: 67 LEBs (1063424 bytes, 1.0 MiB) State: OK Name: bazz Character device major/minor: 254:3 Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Wire-up statx() supportRichard Weinberger1-0/+15
statx() can report what flags a file has, expose flags that UBIFS supports. Especially STATX_ATTR_COMPRESSED and STATX_ATTR_ENCRYPTED can be interesting for userspace. Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Remove dead code from ubifs_get_link()Richard Weinberger1-6/+0
We check the length already, no need to check later again for an empty string. Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Massage debug prints wrt. fscryptRichard Weinberger2-15/+4
If file names are encrypted we can no longer print them. That's why we have to change these prints or remove them completely. Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Add assert to dent_key_init()Richard Weinberger1-0/+1
...to make sure that we don't use it for double hashed lookups instead of dent_key_init_hash(). Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Fix unlink code wrt. double hash lookupsRichard Weinberger3-24/+117
When removing an encrypted file with a long name and without having the key we have to be able to locate and remove the directory entry via a double hash. This corner case was simply forgotten. Fixes: 528e3d178f25 ("ubifs: Add full hash lookup support") Reported-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14ubifs: Fix data node size for truncating uncompressed nodesDavid Oberhollenzer1-1/+3
Currently, the function truncate_data_node only updates the destination data node size if compression is used. For uncompressed nodes, the old length is incorrectly retained. This patch makes sure that the length is correctly set when compression is disabled. Fixes: 7799953b34d1 ("ubifs: Implement encrypt/decrypt for all IO") Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.