| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When dumping struct page information, __dump_page() prints the page type
with a trailing blank followed by the page flags on a separate line:
anon
flags: 0x100000000090034(uptodate|lru|active|head|swapbacked)
It looks like the intent was to use pr_cont() for printing "flags:" but
pr_cont() usage is discouraged so fix this by extending the format to
include the flags into a single line:
anon flags: 0x100000000090034(uptodate|lru|active|head|swapbacked)
If the page is file backed, the name might be long so use two lines:
shmem_aops name:"dev/zero"
flags: 0x10000000008000c(uptodate|dirty|swapbacked)
Eliminate pr_conf() usage as well for appending compound_mapcount.
Link: http://lkml.kernel.org/r/20191112012608.16926-1-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following race is observed due to which a processes faulting on a
swap entry, finds the page neither in swapcache nor swap. This causes
zram to give a zero filled page that gets mapped to the process,
resulting in a user space crash later.
Consider parent and child processes Pa and Pb sharing the same swap slot
with swap_count 2. Swap is on zram with SWP_SYNCHRONOUS_IO set.
Virtual address 'VA' of Pa and Pb points to the shared swap entry.
Pa Pb
fault on VA fault on VA
do_swap_page do_swap_page
lookup_swap_cache fails lookup_swap_cache fails
Pb scheduled out
swapin_readahead (deletes zram entry)
swap_free (makes swap_count 1)
Pb scheduled in
swap_readpage (swap_count == 1)
Takes SWP_SYNCHRONOUS_IO path
zram enrty absent
zram gives a zero filled page
Fix this by making sure that swap slot is freed only when swap count
drops down to one.
Link: http://lkml.kernel.org/r/1571743294-14285-1-git-send-email-vinmenon@codeaurora.org
Fixes: aa8d22a11da9 ("mm: swap: SWP_SYNCHRONOUS_IO: skip swapcache only if swapped page has no other reference")
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Suggested-by: Minchan Kim <minchan@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
try_offline_node() is pretty much broken right now:
- The node span is updated when onlining memory, not when adding it. We
ignore memory that was mever onlined. Bad.
- We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily
trigger a kernel panic. Bad for memory that is offline but also bad
for subsection hotadd with ZONE_DEVICE, whereby the memmap of the
first PFN of a section might contain garbage.
- Sections belonging to mixed nodes are not properly considered.
As memory blocks might belong to multiple nodes, we would have to walk
all pageblocks (or at least subsections) within present sections.
However, we don't have a way to identify whether a memmap that is not
online was initialized (relevant for ZONE_DEVICE). This makes things
more complicated.
Luckily, we can piggy pack on the node span and the nid stored in memory
blocks. Currently, the node span is grown when calling
move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when
removing memory, before calling try_offline_node(). Sysfs links are
created via link_mem_sections(), e.g., during boot or when adding
memory.
If the node still spans memory or if any memory block belongs to the
nid, we don't set the node offline. As memory blocks that span multiple
nodes cannot get offlined, the nid stored in memory blocks is reliable
enough (for such online memory blocks, the node still spans the memory).
Introduce for_each_memory_block() to efficiently walk all memory blocks.
Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span
when removing ZONE_DEVICE memory to fix similar issues (access of
garbage memmaps) - until we have a reliable way to identify whether
these memmaps were properly initialized. This implies later, that once
a node had ZONE_DEVICE memory, we won't be able to set a node offline -
which should be acceptable.
Since commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") memory that is added is not
assoziated with a zone/node (memmap not initialized). The introducing
commit 60a5a19e7419 ("memory-hotplug: remove sysfs file of node")
already missed that we could have multiple nodes for a section and that
the zone/node span is updated when onlining pages, not when adding them.
I tested this by hotplugging two DIMMs to a memory-less and cpu-less
NUMA node. The node is properly onlined when adding the DIMMs. When
removing the DIMMs, the node is properly offlined.
Masayoshi Mizuma reported:
: Without this patch, memory hotplug fails as panic:
:
: BUG: kernel NULL pointer dereference, address: 0000000000000000
: ...
: Call Trace:
: remove_memory_block_devices+0x81/0xc0
: try_remove_memory+0xb4/0x130
: __remove_memory+0xa/0x20
: acpi_memory_device_remove+0x84/0x100
: acpi_bus_trim+0x57/0x90
: acpi_bus_trim+0x2e/0x90
: acpi_device_hotplug+0x2b2/0x4d0
: acpi_hotplug_work_fn+0x1a/0x30
: process_one_work+0x171/0x380
: worker_thread+0x49/0x3f0
: kthread+0xf8/0x130
: ret_from_fork+0x35/0x40
[david@redhat.com: v3]
Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com
Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com
Fixes: 60a5a19e7419 ("memory-hotplug: remove sysfs file of node")
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e86b319
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In collapse_file(), for !is_shmem case, current check cannot guarantee
the locked page is up-to-date. Specifically, xas_unlock_irq() should
not be called before lock_page() and get_page(); and it is necessary to
recheck PageUptodate() after locking the page.
With this bug and CONFIG_READ_ONLY_THP_FOR_FS=y, madvise(HUGE)'ed .text
may contain corrupted data. This is because khugepaged mistakenly
collapses some not up-to-date sub pages into a huge page, and assumes
the huge page is up-to-date. This will NOT corrupt data in the disk,
because the page is read-only and never written back. Fix this by
properly checking PageUptodate() after locking the page. This check
replaces "VM_BUG_ON_PAGE(!PageUptodate(page), page);".
Also, move PageDirty() check after locking the page. Current khugepaged
should not try to collapse dirty file THP, because it is limited to
read-only .text. The only case we hit a dirty page here is when the
page hasn't been written since write. Bail out and retry when this
happens.
syzbot reported bug on previous version of this patch.
Link: http://lkml.kernel.org/r/20191106060930.2571389-2-songliubraving@fb.com
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reported-by: syzbot+efb9e48b9fbdc49bb34a@syzkaller.appspotmail.com
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 1b7e816fc80e ("mm: slub: Fix slab walking for init_on_free")
fixed one problem with the slab walking but missed a key detail: When
walking the list, the head and tail pointers need to be updated since we
end up reversing the list as a result. Without doing this, bulk free is
broken.
One way this is exposed is a NULL pointer with slub_debug=F:
=============================================================================
BUG skbuff_head_cache (Tainted: G T): Object already free
-----------------------------------------------------------------------------
INFO: Slab 0x000000000d2d2f8f objects=16 used=3 fp=0x0000000064309071 flags=0x3fff00000000201
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: 0000 [#1] PREEMPT SMP PTI
RIP: 0010:print_trailer+0x70/0x1d5
Call Trace:
<IRQ>
free_debug_processing.cold.37+0xc9/0x149
__slab_free+0x22a/0x3d0
kmem_cache_free_bulk+0x415/0x420
__kfree_skb_flush+0x30/0x40
net_rx_action+0x2dd/0x480
__do_softirq+0xf0/0x246
irq_exit+0x93/0xb0
do_IRQ+0xa0/0x110
common_interrupt+0xf/0xf
</IRQ>
Given we're now almost identical to the existing debugging code which
correctly walks the list, combine with that.
Link: https://lkml.kernel.org/r/20191104170303.GA50361@gandi.net
Link: http://lkml.kernel.org/r/20191106222208.26815-1-labbott@redhat.com
Fixes: 1b7e816fc80e ("mm: slub: Fix slab walking for init_on_free")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reported-by: Thibaut Sautereau <thibaut.sautereau@clip-os.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <clipos@ssi.gouv.fr>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
An exiting task might belong to an offline cgroup. In this case an
attempt to grab a cgroup reference from the task can end up with an
infinite loop in hugetlb_cgroup_charge_cgroup(), because neither the
cgroup will become online, neither the task will be migrated to a live
cgroup.
Fix this by switching over to css_tryget(). As css_tryget_online()
can't guarantee that the cgroup won't go offline, in most cases the
check doesn't make sense. In this particular case users of
hugetlb_cgroup_charge_cgroup() are not affected by this change.
A similar problem is described by commit 18fa84a2db0e ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Link: http://lkml.kernel.org/r/20191106225131.3543616-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We've encountered a rcu stall in get_mem_cgroup_from_mm():
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 33-....: (21000 ticks this GP) idle=6c6/1/0x4000000000000002 softirq=35441/35441 fqs=5017
(t=21031 jiffies g=324821 q=95837) NMI backtrace for cpu 33
<...>
RIP: 0010:get_mem_cgroup_from_mm+0x2f/0x90
<...>
__memcg_kmem_charge+0x55/0x140
__alloc_pages_nodemask+0x267/0x320
pipe_write+0x1ad/0x400
new_sync_write+0x127/0x1c0
__kernel_write+0x4f/0xf0
dump_emit+0x91/0xc0
writenote+0xa0/0xc0
elf_core_dump+0x11af/0x1430
do_coredump+0xc65/0xee0
get_signal+0x132/0x7c0
do_signal+0x36/0x640
exit_to_usermode_loop+0x61/0xd0
do_syscall_64+0xd4/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The problem is caused by an exiting task which is associated with an
offline memcg. We're iterating over and over in the do {} while
(!css_tryget_online()) loop, but obviously the memcg won't become online
and the exiting task won't be migrated to a live memcg.
Let's fix it by switching from css_tryget_online() to css_tryget().
As css_tryget_online() cannot guarantee that the memcg won't go offline,
the check is usually useless, except some rare cases when for example it
determines if something should be presented to a user.
A similar problem is described by commit 18fa84a2db0e ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Johannes:
: The bug aside, it doesn't matter whether the cgroup is online for the
: callers. It used to matter when offlining needed to evacuate all charges
: from the memcg, and so needed to prevent new ones from showing up, but we
: don't care now.
Link: http://lkml.kernel.org/r/20191106225131.3543616-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeeb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
s->dict.allocated was initialized to 0 but never set after a successful
allocation, thus the code always thought that the dictionary buffer has
to be reallocated.
Link: http://lkml.kernel.org/r/20191104185107.3b6330df@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reported-by: Yu Sun <yusun2@cisco.com>
Acked-by: Daniel Walker <danielwa@cisco.com>
Cc: "Yixia Si (yisi)" <yisi@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Recently, I hit the following issue when running upstream.
kernel BUG at mm/vmscan.c:1521!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 23385 Comm: syz-executor.6 Not tainted 5.4.0-rc4+ #1
RIP: 0010:shrink_page_list+0x12b6/0x3530 mm/vmscan.c:1521
Call Trace:
reclaim_pages+0x499/0x800 mm/vmscan.c:2188
madvise_cold_or_pageout_pte_range+0x58a/0x710 mm/madvise.c:453
walk_pmd_range mm/pagewalk.c:53 [inline]
walk_pud_range mm/pagewalk.c:112 [inline]
walk_p4d_range mm/pagewalk.c:139 [inline]
walk_pgd_range mm/pagewalk.c:166 [inline]
__walk_page_range+0x45a/0xc20 mm/pagewalk.c:261
walk_page_range+0x179/0x310 mm/pagewalk.c:349
madvise_pageout_page_range mm/madvise.c:506 [inline]
madvise_pageout+0x1f0/0x330 mm/madvise.c:542
madvise_vma mm/madvise.c:931 [inline]
__do_sys_madvise+0x7d2/0x1600 mm/madvise.c:1113
do_syscall_64+0x9f/0x4c0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
madvise_pageout() accesses the specified range of the vma and isolates
them, then runs shrink_page_list() to reclaim its memory. But it also
isolates the unevictable pages to reclaim. Hence, we can catch the
cases in shrink_page_list().
The root cause is that we scan the page tables instead of specific LRU
list. and so we need to filter out the unevictable lru pages from our
end.
Link: http://lkml.kernel.org/r/1572616245-18946-1-git-send-email-zhongjiang@huawei.com
Fixes: 1a4e58cce84e ("mm: introduce MADV_PAGEOUT")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit d883544515aa ("mm: mempolicy: make the behavior consistent when
MPOL_MF_MOVE* and MPOL_MF_STRICT were specified") fixed the return value
of mbind() for a couple of corner cases. But, it altered the errno for
some other cases, for example, mbind() should return -EFAULT when part
or all of the memory range specified by nodemask and maxnode points
outside your accessible address space, or there was an unmapped hole in
the specified memory range specified by addr and len.
Fix this by preserving the errno returned by queue_pages_range(). And,
the pagelist may be not empty even though queue_pages_range() returns
error, put the pages back to LRU since mbind_range() is not called to
really apply the policy so those pages should not be migrated, this is
also the old behavior before the problematic commit.
Link: http://lkml.kernel.org/r/1572454731-3925-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: d883544515aa ("mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Li Xinhai <lixinhai.lxh@gmail.com>
Reviewed-by: Li Xinhai <lixinhai.lxh@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.19 and 5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Just got one of these for debugging some unrelated issues, and noticed
that Lenovo seems to have gone back to using RMI4 over smbus with
Synaptics touchpads on some of their new systems, particularly this one.
So, let's enable RMI mode for the X1 Extreme 2nd Generation.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191115221814.31903-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver forgets to destroy workqueue in remove() similarly to what is
done when probe() fails. Add a call to destroy_workqueue() to fix it.
Since unregistration will wait for the work to finish, we do not need to
cancel/flush the work instance in remove().
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191114023405.31477-1-hslester96@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
No timer must be left running when the device goes away.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-and-tested-by: syzbot+b6c55daa701fc389e286@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1573726121.17351.3.camel@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When a lookup is done, the afs filesystem will perform a bulk status-fetch
operation on the requested vnode (file) plus the next 49 other vnodes from
the directory list (in AFS, directory contents are downloaded as blobs and
parsed locally). When the results are received, it will speculatively
populate the inode cache from the extra data.
However, if the lookup races with another lookup on the same directory, but
for a different file - one that's in the 49 extra fetches, then if the bulk
status-fetch operation finishes first, it will try and update the inode
from the other lookup.
If this other inode is still in the throes of being created, however, this
will cause an assertion failure in afs_apply_status():
BUG_ON(test_bit(AFS_VNODE_UNSET, &vnode->flags));
on or about fs/afs/inode.c:175 because it expects data to be there already
that it can compare to.
Fix this by skipping the update if the inode is being created as the
creator will presumably set up the inode with the same information.
Fixes: 39db9815da48 ("afs: Fix application of the results of a inline bulk status fetch")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a comment explaining the rational behind having both
no_compat open and ioctl callbacks to fend off compat tasks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
v2: declare as (struct common_firmware_header *) type because
struct xxx_firmware_header inherits from it
When CE's ucode_id(8) is used to get sdma_hdr, we will be accessing an
unallocated amdgpu_firmware_info instance.
This issue appears on rhel7.7 with gcc 4.8.5. Newer compilers might have
optimized out such 'defined but not referenced' variable.
[ 1120.798564] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a
[ 1120.806703] IP: [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu]
[ 1120.813693] PGD 80000002603ff067 PUD 271b8d067 PMD 0
[ 1120.818931] Oops: 0000 [#1] SMP
[ 1120.822245] Modules linked in: amdgpu(OE+) amdkcl(OE) amd_iommu_v2 amdttm(OE) amd_sched(OE) xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun bridge stp llc devlink ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat iptable_mangle iptable_security iptable_raw nf_conntrack libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dm_mirror dm_region_hash dm_log dm_mod intel_pmc_core intel_powerclamp coretemp intel_rapl joydev kvm_intel eeepc_wmi asus_wmi kvm sparse_keymap iTCO_wdt irqbypass rfkill crc32_pclmul snd_hda_codec_realtek mxm_wmi ghash_clmulni_intel intel_wmi_thunderbolt iTCO_vendor_support snd_hda_codec_generic snd_hda_codec_hdmi aesni_intel lrw gf128mul glue_helper ablk_helper sg cryptd pcspkr snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd pinctrl_sunrisepoint pinctrl_intel soundcore acpi_pad mei_me wmi mei i2c_i801 pcc_cpufreq ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic i915 i2c_algo_bit iosf_mbi drm_kms_helper e1000e syscopyarea sysfillrect sysimgblt fb_sys_fops ahci libahci drm ptp libata crct10dif_pclmul crct10dif_common crc32c_intel serio_raw pps_core drm_panel_orientation_quirks video i2c_hid
[ 1120.954136] CPU: 4 PID: 2426 Comm: modprobe Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1
[ 1120.964390] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 1302 11/09/2015
[ 1120.973321] task: ffff991ef1e3c1c0 ti: ffff991ee625c000 task.ti: ffff991ee625c000
[ 1120.981020] RIP: 0010:[<ffffffffc0e3c9b3>] [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu]
[ 1120.990483] RSP: 0018:ffff991ee625f950 EFLAGS: 00010202
[ 1120.995935] RAX: 0000000000000002 RBX: ffff991edf6b2d38 RCX: ffff991edf6a0000
[ 1121.003391] RDX: 0000000000000000 RSI: ffff991f01d13898 RDI: ffffffffc110afb3
[ 1121.010706] RBP: ffff991ee625f9b0 R08: 0000000000000000 R09: 0000000000000000
[ 1121.018029] R10: 00000000000004c4 R11: ffff991ee625f64e R12: ffff991edf6b3220
[ 1121.025353] R13: ffff991edf6a0000 R14: 0000000000000008 R15: ffff991edf6b2d30
[ 1121.032666] FS: 00007f97b0c0b740(0000) GS:ffff991f01d00000(0000) knlGS:0000000000000000
[ 1121.041000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1121.046880] CR2: 000000000000000a CR3: 000000025e604000 CR4: 00000000003607e0
[ 1121.054239] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1121.061631] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1121.068938] Call Trace:
[ 1121.071494] [<ffffffffc0e3dba8>] psp_hw_init+0x218/0x270 [amdgpu]
[ 1121.077886] [<ffffffffc0da3188>] amdgpu_device_fw_loading+0xe8/0x160 [amdgpu]
[ 1121.085296] [<ffffffffc0e3b34c>] ? vega10_ih_irq_init+0x4bc/0x730 [amdgpu]
[ 1121.092534] [<ffffffffc0da5c75>] amdgpu_device_init+0x1495/0x1c90 [amdgpu]
[ 1121.099675] [<ffffffffc0da9cab>] amdgpu_driver_load_kms+0x8b/0x2f0 [amdgpu]
[ 1121.106888] [<ffffffffc01b25cf>] drm_dev_register+0x12f/0x1d0 [drm]
[ 1121.113419] [<ffffffffa4dcdfd8>] ? pci_enable_device_flags+0xe8/0x140
[ 1121.120183] [<ffffffffc0da260a>] amdgpu_pci_probe+0xca/0x170 [amdgpu]
[ 1121.126919] [<ffffffffa4dcf97a>] local_pci_probe+0x4a/0xb0
[ 1121.132622] [<ffffffffa4dd10c9>] pci_device_probe+0x109/0x160
[ 1121.138607] [<ffffffffa4eb4205>] driver_probe_device+0xc5/0x3e0
[ 1121.144766] [<ffffffffa4eb4603>] __driver_attach+0x93/0xa0
[ 1121.150507] [<ffffffffa4eb4570>] ? __device_attach+0x50/0x50
[ 1121.156422] [<ffffffffa4eb1da5>] bus_for_each_dev+0x75/0xc0
[ 1121.162213] [<ffffffffa4eb3b7e>] driver_attach+0x1e/0x20
[ 1121.167771] [<ffffffffa4eb3620>] bus_add_driver+0x200/0x2d0
[ 1121.173590] [<ffffffffa4eb4c94>] driver_register+0x64/0xf0
[ 1121.179345] [<ffffffffa4dd0905>] __pci_register_driver+0xa5/0xc0
[ 1121.185593] [<ffffffffc099f000>] ? 0xffffffffc099efff
[ 1121.190914] [<ffffffffc099f0a4>] amdgpu_init+0xa4/0xb0 [amdgpu]
[ 1121.197101] [<ffffffffa4a0210a>] do_one_initcall+0xba/0x240
[ 1121.202901] [<ffffffffa4b1c90a>] load_module+0x271a/0x2bb0
[ 1121.208598] [<ffffffffa4dad740>] ? ddebug_proc_write+0x100/0x100
[ 1121.214894] [<ffffffffa4b1ce8f>] SyS_init_module+0xef/0x140
[ 1121.220698] [<ffffffffa518bede>] system_call_fastpath+0x25/0x2a
[ 1121.226870] Code: b4 01 60 a2 00 00 31 c0 e8 83 60 33 e4 41 8b 47 08 48 8b 4d d0 48 c7 c7 b3 af 10 c1 48 69 c0 68 07 00 00 48 8b 84 01 60 a2 00 00 <48> 8b 70 08 31 c0 48 89 75 c8 e8 56 60 33 e4 48 8b 4d d0 48 c7
[ 1121.247422] RIP [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu]
[ 1121.254432] RSP <ffff991ee625f950>
[ 1121.258017] CR2: 000000000000000a
[ 1121.261427] ---[ end trace e98b35387ede75bd ]---
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Fixes: c5fb912653dae3f878 ("drm/amdgpu: add firmware header printing for psp fw loading (v2)")
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The driver misses calling destroy_workqueue in remove like what is done
when probe fails.
Add the missed calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a bug that checking the same active_list over and over again
in iocg_activate(). The intention of the code was checking whether all
the ancestors and self have already been activated. So fix it.
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some versions of gcc (so far 6.3 and 7.4) throw a warning:
drivers/block/rbd.c: In function 'rbd_object_map_callback':
drivers/block/rbd.c:2124:21: warning: 'current_state' may be used uninitialized in this function [-Wmaybe-uninitialized]
(current_state == OBJECT_EXISTS && state == OBJECT_EXISTS_CLEAN))
drivers/block/rbd.c:2092:23: note: 'current_state' was declared here
u8 state, new_state, current_state;
^~~~~~~~~~~~~
It's bogus because all current_state accesses are guarded by
has_current_state.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Ceph can in some cases issue an async DIO request, in which case we can
end up calling ceph_end_io_direct before the I/O is actually complete.
That may allow buffered operations to proceed while DIO requests are
still in flight.
Fix this by incrementing the i_dio_count when issuing an async DIO
request, and decrement it when tearing down the aio_req.
Fixes: 321fe13c9398 ("ceph: add buffered/direct exclusionary locking for reads and writes")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Most of the time, we (or the vfs layer) takes the inode_lock and then
acquires caps, but ceph_read_iter does the opposite, and that can lead
to a deadlock.
When there are multiple clients treading over the same data, we can end
up in a situation where a reader takes caps and then tries to acquire
the inode_lock. Another task holds the inode_lock and issues a request
to the MDS which needs to revoke the caps, but that can't happen until
the inode_lock is unwedged.
Fix this by having ceph_read_iter take the inode_lock earlier, before
attempting to acquire caps.
Fixes: 321fe13c9398 ("ceph: add buffered/direct exclusionary locking for reads and writes")
Link: https://tracker.ceph.com/issues/36348
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The recently introduced unit descriptor validation had some bug for
processing and extension units, it counts a bControlSize byte twice so
it expected a bigger size than it should have been. This seems
resulting in a probe error on a few devices.
Fix the calculation for proper checks of PU and EU.
Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Acquire the per-VM slots_lock when zapping all shadow pages as part of
toggling nx_huge_pages. The fast zap algorithm relies on exclusivity
(via slots_lock) to identify obsolete vs. valid shadow pages, because it
uses a single bit for its generation number. Holding slots_lock also
obviates the need to acquire a read lock on the VM's srcu.
Failing to take slots_lock when toggling nx_huge_pages allows multiple
instances of kvm_mmu_zap_all_fast() to run concurrently, as the other
user, KVM_SET_USER_MEMORY_REGION, does not take the global kvm_lock.
(kvm_mmu_zap_all_fast() does take kvm->mmu_lock, but it can be
temporarily dropped by kvm_zap_obsolete_pages(), so it is not enough
to enforce exclusivity).
Concurrent fast zap instances causes obsolete shadow pages to be
incorrectly identified as valid due to the single bit generation number
wrapping, which results in stale shadow pages being left in KVM's MMU
and leads to all sorts of undesirable behavior.
The bug is easily confirmed by running with CONFIG_PROVE_LOCKING and
toggling nx_huge_pages via its module param.
Note, until commit 4ae5acbc4936 ("KVM: x86/mmu: Take slots_lock when
using kvm_mmu_zap_all_fast()", 2019-11-13) the fast zap algorithm used
an ulong-sized generation instead of relying on exclusivity for
correctness, but all callers except the recently added set_nx_huge_pages()
needed to hold slots_lock anyways. Therefore, this patch does not have
to be backported to stable kernels.
Given that toggling nx_huge_pages is by no means a fast path, force it
to conform to the current approach instead of reintroducing the previous
generation count.
Fixes: b8e8c8303ff28 ("kvm: mmu: ITLB_MULTIHIT mitigation", but NOT FOR STABLE)
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Sparse uses the same executable for all archs and uses flags
like -m64, -mbig-endian or -D__arm__ for arch-specific parameters.
But Sparse also uses value from the host machine used to build
Sparse as default value for the target machine.
This works, of course, well for native build but can create
problems when cross-compiling, like defining both '__i386__'
and '__arm__' when cross-compiling for arm on a x86-64 machine.
Fix this by explicitely telling sparse the target architecture.
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Since commit 54b8ae66ae1a ("kbuild: change *FLAGS_<basetarget>.o to
take the path relative to $(obj)"), sparc allmodconfig fails to build
as follows:
CC arch/sparc/vdso/vdso32/vclock_gettime.o
unrecognized e_machine 18 arch/sparc/vdso/vdso32/vclock_gettime.o
arch/sparc/vdso/vdso32/vclock_gettime.o: failed
The cause of the breakage is that -pg flag not being dropped.
The vdso32 files are located in the vdso32/ subdirectory, but I missed
to update the Makefile.
I removed the meaningless CFLAGS_REMOVE_vdso-note.o since it is only
effective for C file.
vdso-note.o is compiled from assembly file:
arch/sparc/vdso/vdso-note.S
arch/sparc/vdso/vdso32/vdso-note.S
Fixes: 54b8ae66ae1a ("kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)")
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 3726112ec731 ("block, bfq: re-schedule empty queues if
they deserve I/O plugging"), to prevent the service guarantees of a
bfq_queue from being violated, the bfq_queue may be left busy, i.e.,
scheduled for service, even if empty (see comments in
__bfq_bfqq_expire() for details). But, if no process will send
requests to the bfq_queue any longer, then there is no point in
keeping the bfq_queue scheduled for service.
In addition, keeping the bfq_queue scheduled for service, but with no
process reference any longer, may cause the bfq_queue to be freed when
descheduled from service. But this is assumed to never happen, and
causes a UAF if it happens. This, in turn, caused crashes [1, 2].
This commit fixes this issue by descheduling an empty bfq_queue when
it remains with not process reference.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1767539
[2] https://bugzilla.kernel.org/show_bug.cgi?id=205447
Fixes: 3726112ec731 ("block, bfq: re-schedule empty queues if they deserve I/O plugging")
Reported-by: Chris Evich <cevich@redhat.com>
Reported-by: Patrick Dung <patdung100@gmail.com>
Reported-by: Thorsten Schubert <tschubert@bafh.org>
Tested-by: Thorsten Schubert <tschubert@bafh.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The quirks2 are parsed and set (e.g. from DT) before the quirk for broken
HS200 is set in the driver.
The driver needs to enable just this flag, not rewrite the whole quirk set.
Fixes: 7871aa60ae00 ("mmc: sdhci-of-at91: add quirk for broken HS200")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The commit 60849562a5db ("ALSA: usb-audio: Fix possible NULL
dereference at create_yamaha_midi_quirk()") added NULL checks in
create_yamaha_midi_quirk(), but there was an overlook. The code
allows one of either injd or outjd is NULL, but the second if check
made returning -ENODEV if any of them is NULL. Fix it in a proper
form.
Fixes: 60849562a5db ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A test case was reported where two linked reads with registered buffers
failed the second link always. This is because we set the expected value
of a request in req->result, and if we don't get this result, then we
fail the dependent links. For some reason the registered buffer import
returned -ERROR/0, while the normal import returns -ERROR/length. This
broke linked commands with registered buffers.
Fix this by making io_import_fixed() correctly return the mapped length.
Cc: stable@vger.kernel.org # v5.3
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For timeout requests io_uring tries to grab a file with specified fd,
which is usually stdin/fd=0.
Update io_op_needs_file()
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bspec was just updated with a minor correction to entry 61 (it
shouldn't have had the SCF bit set).
v2:
- Add a MOCS_ENTRY_UNUSED() and use it to declare the
explicitly-reserved MOCS entries. (Lucas)
- Move the warning suppression from the Makefile to a #pragma that only
affects the TGL table. (Lucas)
v3:
- Entries 16 and 17 are identical to ICL now, so no need to explicitly
adjust them (or mess with compiler warning overrides).
Bspec: 45101
Fixes: 2ddf992179c4 ("drm/i915/tgl: Define MOCS entries for Tigerlake")
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-2-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
(cherry picked from commit bfb0e8e63d865559cc97af235aea583b7dcc235f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This reverts commit f4071997f1de016780ec6b79c63d90cd5886ee83.
These extra EHL entries won't behave as expected without a bit more work
on the kernel side so let's drop them until that kernel work has had a
chance to land. Userspace trying to use these new entries won't get the
advantage of the new functionality these entries are meant to provide,
but at least it won't misbehave.
When we do add these back in the future, we'll probably want to
explicitly use separate tables for ICL and EHL so that userspace
software that mistakenly uses these entries (which are undefined on ICL)
sees the same behavior it sees with all the other undefined entries.
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Fixes: f4071997f1de ("drm/i915/ehl: Update MOCS table for EHL")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-1-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 046091758b50a5fff79726a31c1391614a3d84c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On a system without KVM_COMPAT, we prevent IOCTLs from being issued
by a compat task. Although this prevents most silly things from
happening, it can still confuse a 32bit userspace that is able
to open the kvm device (the qemu test suite seems to be pretty
mad with this behaviour).
Take a more radical approach and return a -ENODEV to the compat
task.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When applying commit 7a5ee6edb42e ("KVM: X86: Fix initialization of MSR
lists"), it forgot to reset the three MSR lists number varialbes to 0
while removing the useless conditionals.
Fixes: 7a5ee6edb42e (KVM: X86: Fix initialization of MSR lists)
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Glibc-2.30 gained gettid() wrapper, selftests fail to compile:
lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration
58 | static pid_t gettid(void)
| ^~~~~~
In file included from /usr/include/unistd.h:1170,
from include/test_util.h:18,
from lib/assert.c:10:
/usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
34 | extern __pid_t gettid (void) __THROW;
| ^~~~~~
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If a huge page is recovered (and becomes no executable) while another
thread is executing it, the resulting contention on mmu_lock can cause
latency spikes. Disabling recovery for PREEMPT_RT kernels fixes this
issue.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The datasheet of V3s (and various other chips) wrote
that TCON0_DCLK_DIV can be >= 1 if only dclk is used,
and must >= 6 if dclk1 or dclk2 is used. As currently
neither dclk1 nor dclk2 is used (no writes to these
bits), let's set minimal division to 1.
If this minimal division is 6, some common dot clock
frequencies can't be produced (e.g. 30MHz will not be
possible and will fallback to 25MHz), which is
obviously not an expected behaviour.
Signed-off-by: Yunhao Tian <t123yh@outlook.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
|
|
When the CC variable contains quotes, e.g. when using
ccache (make CC="ccache <compiler>"), this script always
fails, so CONFIG_RELR is never enabled, even when the
toolchain supports this feature. Removing the /dev/null
redirect and invoking the script manually shows the issue:
$ CC='/usr/bin/ccache clang' ./scripts/tools-support-relr.sh
./scripts/tools-support-relr.sh: 7: ./scripts/tools-support-relr.sh: /usr/bin/ccache clang: not found
Fix this by un-quoting the variables.
Before:
$ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \
NM=llvm-nm OBJCOPY=llvm-objcopy defconfig
$ grep RELR .config
CONFIG_ARCH_HAS_RELR=y
With this change:
$ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \
NM=llvm-nm OBJCOPY=llvm-objcopy defconfig
$ grep RELR .config
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_ARCH_HAS_RELR=y
CONFIG_RELR=y
Fixes: 5cf896fb6be3 ("arm64: Add support for relocating the kernel with RELR relocations")
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/769
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If the nullity check for `substream->runtime` is outside of the lock
region, it is possible to have a null runtime in the critical section
if snd_pcm_detach_substream is called right before the lock.
Signed-off-by: paulhsia <paulhsia@chromium.org>
Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
While output urb's snd_complete_urb() is executing, calling
prepare_outbound_urb() may cause endpoint stopped before
prepare_outbound_urb() returns and result in next urb submitted
to stopped endpoint. usb-audio driver cannot re-use it afterwards as
the urb is still hold by usb stack.
This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again
to let snd_complete_urb() know the endpoint already stopped and does not
submit next urb. Below kind of error will be fixed:
[ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1
[ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error
Signed-off-by: Henry Lin <henryl@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The device md->input is used after it is released. Setting the device
data to NULL is unnecessary as the device is never used again. Instead,
md->input should be assigned NULL to avoid accessing the freed memory
accidently. Besides, checking md->si against NULL is superfluous as it
points to a variable address, which cannot be NULL.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/1572936379-6423-1-git-send-email-bianpan2016@163.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver for F54 just polls the status and doesn't even have a IRQ
handler registered. Make sure to disable all F54 IRQs, so we don't crash
the kernel on a nonexistent handler.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191105114402.6009-1-l.stach@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This went into staging in rc7. It turns out that was a mistake, and
apparently it wasn't even supposed to go there at all, but be introduced
as a regular filesystem.
We don't try to sneak in whole new filesystems this late in the rc, just
delete the whole thing, and it can be re-introduced as a proper patch
with proper acks from actual filesystem people instead of some odd
late-rc staging back-door.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since CNP it's possible for rawclk to have two different values, 19.2
and 24 MHz. If the value indicated by SFUSE_STRAP register is different
from the power on default for PCH_RAWCLK_FREQ, we'll end up having a
mismatch between the rawclk hardware and software states after
suspend/resume. On previous platforms this used to work by accident,
because the power on defaults worked just fine.
Update the rawclk also on resume. The natural place to do this would be
intel_modeset_init_hw(), however VLV/CHV need it done before
intel_power_domains_init_hw(). Thus put it there even if it feels
slightly out of place.
v2: Call intel_update_rawclck() in intel_power_domains_init_hw() for all
platforms (Ville).
Reported-by: Shawn Lee <shawn.c.lee@intel.com>
Cc: Shawn Lee <shawn.c.lee@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101142024.13877-1-jani.nikula@intel.com
(cherry picked from commit 59ed05ccdded5eb18ce012eff3d01798ac8535fa)
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
__bio_try_merge_page() may merge a page to bio without bio_full() check
and cause bi_size overflow.
The overflow typically ends up with sd_init_command() warning on zero
segment request with call trace like this:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1986 at drivers/scsi/scsi_lib.c:1025 scsi_init_io+0x156/0x180
CPU: 2 PID: 1986 Comm: kworker/2:1H Kdump: loaded Not tainted 5.4.0-rc7 #1
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:scsi_init_io+0x156/0x180
RSP: 0018:ffffa11487663bf0 EFLAGS: 00010246
RAX: 00000000002be0a0 RBX: ffff8e6e9ff30118 RCX: 0000000000000000
RDX: 00000000ffffffe1 RSI: 0000000000000000 RDI: ffff8e6e9ff30118
RBP: ffffa11487663c18 R08: ffffa11487663d28 R09: ffff8e6e9ff30150
R10: 0000000000000001 R11: 0000000000000000 R12: ffff8e6e9ff30000
R13: 0000000000000001 R14: ffff8e74a1cf1800 R15: ffff8e6e9ff30000
FS: 0000000000000000(0000) GS:ffff8e6ea7680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff18cf0fe8 CR3: 0000000659f0a001 CR4: 00000000001606e0
Call Trace:
sd_init_command+0x326/0xb40 [sd_mod]
scsi_queue_rq+0x502/0xaa0
? blk_mq_get_driver_tag+0xe7/0x120
blk_mq_dispatch_rq_list+0x256/0x5a0
? elv_rb_del+0x24/0x30
? deadline_remove_request+0x7b/0xc0
blk_mq_do_dispatch_sched+0xa3/0x140
blk_mq_sched_dispatch_requests+0xfb/0x170
__blk_mq_run_hw_queue+0x81/0x130
blk_mq_run_work_fn+0x1b/0x20
process_one_work+0x179/0x390
worker_thread+0x4f/0x3e0
kthread+0x105/0x140
? max_active_store+0x80/0x80
? kthread_bind+0x20/0x20
ret_from_fork+0x35/0x40
---[ end trace f9036abf5af4a4d3 ]---
blk_update_request: I/O error, dev sdd, sector 2875552 op 0x1:(WRITE) flags 0x0 phys_seg 0 prio class 0
XFS (sdd1): writeback error on sector 2875552
__bio_try_merge_page() should check the overflow before actually doing
merge.
Fixes: 07173c3ec276c ("block: enable multipage bvecs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and
instead manually handle ZONE_DEVICE on a case-by-case basis. For things
like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal
pages, e.g. put pages grabbed via gup(). But for flows such as setting
A/D bits or shifting refcounts for transparent huge pages, KVM needs to
to avoid processing ZONE_DEVICE pages as the flows in question lack the
underlying machinery for proper handling of ZONE_DEVICE pages.
This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup()
when running a KVM guest backed with /dev/dax memory, as KVM straight up
doesn't put any references to ZONE_DEVICE pages acquired by gup().
Note, Dan Williams proposed an alternative solution of doing put_page()
on ZONE_DEVICE pages immediately after gup() in order to simplify the
auditing needed to ensure is_zone_device_page() is called if and only if
the backing device is pinned (via gup()). But that approach would break
kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til
unmap() when accessing guest memory, unlike KVM's secondary MMU, which
coordinates with mmu_notifier invalidations to avoid creating stale
page references, i.e. doesn't rely on pages being pinned.
[*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl
Reported-by: Adam Borowski <kilobyte@angband.pl>
Analyzed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Streamline the PID.PIR check and change its call sites to use
the newly added helper.
Suggested-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When vCPU enters block phase, pi_pre_block() inserts vCPU to a per pCPU
linked list of all vCPUs that are blocked on this pCPU. Afterwards, it
changes PID.NV to POSTED_INTR_WAKEUP_VECTOR which its handler
(wakeup_handler()) is responsible to kick (unblock) any vCPU on that
linked list that now has pending posted interrupts.
While vCPU is blocked (in kvm_vcpu_block()), it may be preempted which
will cause vmx_vcpu_pi_put() to set PID.SN. If later the vCPU will be
scheduled to run on a different pCPU, vmx_vcpu_pi_load() will clear
PID.SN but will also *overwrite PID.NDST to this different pCPU*.
Instead of keeping it with original pCPU which vCPU had entered block
phase on.
This results in an issue because when a posted interrupt is delivered, as
the wakeup_handler() will be executed and fail to find blocked vCPU on
its per pCPU linked list of all vCPUs that are blocked on this pCPU.
Which is due to the vCPU being placed on a *different* per pCPU
linked list i.e. the original pCPU in which it entered block phase.
The regression is introduced by commit c112b5f50232 ("KVM: x86:
Recompute PID.ON when clearing PID.SN"). Therefore, partially revert
it and reintroduce the condition in vmx_vcpu_pi_load() responsible for
avoiding changing PID.NDST when loading a blocked vCPU.
Fixes: c112b5f50232 ("KVM: x86: Recompute PID.ON when clearing PID.SN")
Tested-by: Nathan Ni <nathan.ni@oracle.com>
Co-developed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 17e433b54393 ("KVM: Fix leak vCPU's VMCS value into other pCPU")
introduced vmx_dy_apicv_has_pending_interrupt() in order to determine
if a vCPU have a pending posted interrupt. This routine is used by
kvm_vcpu_on_spin() when searching for a a new runnable vCPU to schedule
on pCPU instead of a vCPU doing busy loop.
vmx_dy_apicv_has_pending_interrupt() determines if a
vCPU has a pending posted interrupt solely based on PID.ON. However,
when a vCPU is preempted, vmx_vcpu_pi_put() sets PID.SN which cause
raised posted interrupts to only set bit in PID.PIR without setting
PID.ON (and without sending notification vector), as depicted in VT-d
manual section 5.2.3 "Interrupt-Posting Hardware Operation".
Therefore, checking PID.ON is insufficient to determine if a vCPU has
pending posted interrupts and instead we should also check if there is
some bit set on PID.PIR if PID.SN=1.
Fixes: 17e433b54393 ("KVM: Fix leak vCPU's VMCS value into other pCPU")
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Co-developed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Outstanding Notification (ON) bit is part of the Posted Interrupt
Descriptor (PID) as opposed to the Posted Interrupts Register (PIR).
The latter is a bitmap for pending vectors.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
Ralph Campbell
Vinayak Menon
David Hildenbrand
Song Liu
Laura Abbott
Roman Gushchin
Lasse Collin
zhong jiang
Yang Shi
Lyude Paul
Chuhong Yuan
Oliver Neukum
David Howells
Marc Zyngier
Xiaojie Yuan
Jiufei Xue
Ilya Dryomov
Jeff Layton
Takashi Iwai
Sean Christopherson
Luc Van Oostenryck
Masahiro Yamada
Paolo Valente
Eugen Hristev
Jens Axboe
Pavel Begunkov
Matt Roper
Xiaoyao Li
Vitaly Kuznetsov
Paolo Bonzini
Yunhao Tian
Ilie Halip
paulhsia
Henry Lin
Pan Bian
Lucas Stach
Linus Torvalds
Jani Nikula
Junichi Nomura
Joao Martins
Liran Alon