| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When !CONFIG_NO_HZ_COMMON we get this new GCC warning:
kernel/sched/fair.c:8398:13: warning: ‘update_nohz_stats’ defined but not used [-Wunused-function]
Move update_nohz_stats() to an already existing CONFIG_NO_HZ_COMMON #ifdef
block.
Beyond fixing the GCC warning, this also simplifies the update_nohz_stats() function.
[ mingo: Rewrote the changelog. ]
Fixes: 0826530de3cb ("sched/fair: Remove update of blocked load from newidle_balance")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210329144029.29200-1-yuehaibing@huawei.com
|
|
|
|
Since uprobes is not supported for thumb, check that the thumb bit is
not set when matching the uprobes instruction hooks.
The Arm UDF instructions used for uprobes triggering
(UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the
same encoding as a pair of unallocated 32-bit thumb instructions (not
UDF) when the condition code is 0b1111 (0xf). This in effect makes it
possible to trigger the uprobes functionality from thumb, and at that
using two unallocated instructions which are not permanently undefined.
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Cc: stable@vger.kernel.org
Fixes: c7edc9e326d5 ("ARM: add uprobes support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
This does the directory entry name verification for the legacy
"fillonedir" (and compat) interface that goes all the way back to the
dark ages before we had a proper dirent, and the readdir() system call
returned just a single entry at a time.
Nobody should use this interface unless you still have binaries from
1991, but let's do it right.
This came up during discussions about unsafe_copy_to_user() and proper
checking of all the inputs to it, as the networking layer is looking to
use it in a few new places. So let's make sure the _old_ users do it
all right and proper, before we add new ones.
See also commit 8a23eb804ca4 ("Make filldir[64]() verify the directory
entry filename is valid") which did the proper modern interfaces that
people actually use. It had a note:
Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.
which this now corrects. Note that we really don't care about POSIX and
the presense of '/' in a directory entry, but verify_dirent_name() also
ends up doing the proper name length verification which is what the
input checking discussion was about.
[ Another option would be to remove the support for this particular very
old interface: any binaries that use it are likely a.out binaries, and
they will no longer run anyway since we removed a.out binftm support
in commit eac616557050 ("x86: Deprecate a.out support").
But I'm not sure which came first: getdents() or ELF support, so let's
pretend somebody might still have a working binary that uses the
legacy readdir() case.. ]
Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_SCHED_DEBUG is the build-time Kconfig knob, the boot param
sched_debug and the /debug/sched/debug_enabled knobs control the
sched_debug_enabled variable, but what they really do is make
SCHED_DEBUG more verbose, so rename the lot.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
The CXL Identify Memory Device output payload emits capacity in 256MB
units. The driver is treating the capacity field as bytes. This was
missed because QEMU reports bytes when it should report bytes / 256MB.
Fixes: 8adaf747c9f0 ("cxl/mem: Find device capabilities")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/161862021044.3259705.7008520073059739760.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When I added support to allow generic netlink multicast groups to be
restricted to subscribers with CAP_NET_ADMIN I was unaware that a
genl_bind implementation already existed in the past.
It was reverted due to ABBA deadlock:
1. ->netlink_bind gets called with the table lock held.
2. genetlink bind callback is invoked, it grabs the genl lock.
But when a new genl subsystem is (un)registered, these two locks are
taken in reverse order.
One solution would be to revert again and add a comment in genl
referring 1e82a62fec613, "genetlink: remove genl_bind").
This would need a second change in mptcp to not expose the raw token
value anymore, e.g. by hashing the token with a secret key so userspace
can still associate subflow events with the correct mptcp connection.
However, Paolo Abeni reminded me to double-check why the netlink table is
locked in the first place.
I can't find one. netlink_bind() is already called without this lock
when userspace joins a group via NETLINK_ADD_MEMBERSHIP setsockopt.
Same holds for the netlink_unbind operation.
Digging through the history, commit f773608026ee1
("netlink: access nlk groups safely in netlink bind and getname")
expanded the lock scope.
commit 3a20773beeeeade ("net: netlink: cap max groups which will be considered in netlink_bind()")
... removed the nlk->ngroups access that the lock scope
extension was all about.
Reduce the lock scope again and always call ->netlink_bind without
the table lock.
The Fixes tag should be vs. the patch mentioned in the link below,
but that one got squash-merged into the patch that came earlier in the
series.
Fixes: 4d54cc32112d8d ("mptcp: avoid lock_fast usage in accept path")
Link: https://lore.kernel.org/mptcp/20210213000001.379332-8-mathew.j.martineau@linux.intel.com/T/#u
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Sean Tranchetti <stranche@codeaurora.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix various kernel-doc warnings in lib/ due to missing or erroneous
function names.
Add kernel-doc for some function parameters that was missing. Use
kernel-doc "Return:" notation in earlycpio.c.
Quietens the following warnings:
lib/earlycpio.c:61: warning: expecting prototype for cpio_data find_cpio_data(). Prototype was for find_cpio_data() instead
lib/lru_cache.c:640: warning: expecting prototype for lc_dump(). Prototype was for lc_seq_dump_details() instead
lru_cache.c:90: warning: Function parameter or member 'cache' not described in 'lc_create'
lib/parman.c:368: warning: expecting prototype for parman_item_del(). Prototype was for parman_item_remove() instead
parman.c:309: warning: Excess function parameter 'prority' description in 'parman_prio_init'
lib/radix-tree.c:703: warning: expecting prototype for __radix_tree_insert(). Prototype was for radix_tree_insert() instead
radix-tree.c:180: warning: Excess function parameter 'addr' description in 'radix_tree_find_next_bit'
radix-tree.c:180: warning: Excess function parameter 'size' description in 'radix_tree_find_next_bit'
radix-tree.c:931: warning: Function parameter or member 'iter' not described in 'radix_tree_iter_replace'
Link: https://lkml.kernel.org/r/20210411221756.15461-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With clang-11+, the code is broken due to my kvmalloc() conversion
(which predated the clang-11 support code) leaving one vmalloc() in
place. Fix that.
Link: https://lkml.kernel.org/r/20210412214210.6e1ecca9cdc5.I24459763acf0591d5e6b31c7e3a59890d802f79c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
READ_ONCE() cannot be used for reading PTEs. Use ptep_get() instead, to
avoid the following errors:
CC mm/ptdump.o
In file included from <command-line>:
mm/ptdump.c: In function 'ptdump_pte_entry':
include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_207' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
320 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:301:4: note: in definition of macro '__compiletime_assert'
301 | prefix ## suffix(); \
| ^~~~~~
include/linux/compiler_types.h:320:2: note: in expansion of macro '_compiletime_assert'
320 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:36:2: note: in expansion of macro 'compiletime_assert'
36 | compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
| ^~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:49:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
49 | compiletime_assert_rwonce_type(x); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mm/ptdump.c:114:14: note: in expansion of macro 'READ_ONCE'
114 | pte_t val = READ_ONCE(*pte);
| ^~~~~~~~~
make[2]: *** [mm/ptdump.o] Error 1
See commit 481e980a7c19 ("mm: Allow arches to provide ptep_get()") and
commit c0e1c8c22beb ("powerpc/8xx: Provide ptep_get() with 16k pages")
for details.
Link: https://lkml.kernel.org/r/912b349e2bcaa88939904815ca0af945740c6bd4.1618478922.git.christophe.leroy@csgroup.eu
Fixes: 30d621f6723b ("mm: add generic ptdump")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mapping dirty helpers have, so far, been only used on X86, but a port of
vmwgfx to ARM64 exposed a problem which results in a compilation error
on ARM64 systems:
mm/mapping_dirty_helpers.c: In function `wp_clean_pud_entry':
mm/mapping_dirty_helpers.c:172:32: error: implicit declaration of function `pud_dirty'; did you mean `pmd_dirty'? [-Werror=implicit-function-declaration]
This is due to the fact that mapping_dirty_helpers code assumes that
pud_dirty is always defined, which is not the case for architectures
that don't define CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD.
ARM64 arch is a little inconsistent when it comes to PUD hugepage
helpers, e.g. it defines pud_young but not pud_dirty but regardless of
that the core kernel code shouldn't assume that any of the PUD hugepage
helpers are available unless CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
is defined. This prevents compilation errors whenever one of the
drivers is ported to new architectures.
Link: https://lkml.kernel.org/r/20210409165151.694574-1-zackr@vmware.com
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellstrm (Intel) <thomas_os@shipmail.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:
CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
from libbpf.c:37:
/usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
43 | #define ia64_mf() asm volatile ("mf" ::: "memory")
|
In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
from /usr/include/ia64-linux-gnu/asm/swab.h:11,
from /usr/include/linux/swab.h:8,
from /usr/include/linux/byteorder/little_endian.h:13,
from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
from libbpf.c:36:
/usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
|
cc1: all warnings being treated as errors
Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no longer an ia64-specific version of the errno.h header below
arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with:
CC /usr/src/linux/tools/bpf/bpftool/btf_dumper.o
In file included from /usr/src/linux/tools/include/linux/err.h:8,
from btf_dumper.c:11:
/usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory
13 | #include "../../../arch/ia64/include/uapi/asm/errno.h"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Thus, just remove the inclusion of the ia64-specific errno.h so that the
build will use the generic errno.h header on this target which was used
there anyway as the ia64-specific errno.h was just a wrapper for the
generic header.
Fixes: c25f867ddd00 ("ia64: remove unneeded uapi asm-generic wrappers")
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix IA64 discontig.c Section mismatch warnings.
When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event. Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.
WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.
WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.
WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.
Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix ia64 generic_defconfig duplicate entries, as warned by:
arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA: => 58
arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA_PIIX: => 59
These 2 symbols still have the same value as in the removed lines.
Link: https://lkml.kernel.org/r/20210411020255.18052-1-rdunlap@infradead.org
Fixes: c331649e6371 ("ia64: Use libata instead of the legacy ide driver in defconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in
arch/csky/Kconfig.
The symbol in e1000 has been around longer, so change arch/csky/ to use
DRAM_BASE instead of RAM_BASE to remove the conflict. (although e1000
is also a 2-line change)
Link: https://lkml.kernel.org/r/20210411055335.7111-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1].
When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.
This patch fixes the following compilation warning:
include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]
[akpm@linux-foundation.org: fix merge snafu]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c885a8 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gcc-11 adds support for -fsanitize=kernel-hwaddress, so it becomes
possible to enable CONFIG_KASAN_SW_TAGS.
Unfortunately this fails to build at the moment, because the
corresponding command line arguments use llvm specific syntax.
Change it to use the cc-param macro instead, which works on both clang
and gcc.
[elver@google.com: fixup for "kasan: fix hwasan build for gcc"]
Link: https://lkml.kernel.org/r/YHQZVfVVLE/LDK2v@elver.google.com
Link: https://lkml.kernel.org/r/20210323124112.1229772-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix stray kernel-doc warnings in mm/ due to mis-typed or missing function
names.
Quietens these kernel-doc warnings:
mm/mmu_gather.c:264: warning: expecting prototype for tlb_gather_mmu(). Prototype was for __tlb_gather_mmu() instead
mm/oom_kill.c:180: warning: expecting prototype for Check whether unreclaimable slab amount is greater than(). Prototype was for should_dump_unreclaim_slab() instead
mm/shuffle.c:155: warning: expecting prototype for shuffle_free_memory(). Prototype was for __shuffle_free_memory() instead
Link: https://lkml.kernel.org/r/20210411210642.11362-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update my email and change myself to Reviewer.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update various selftest error messages:
* The 'Rx tried to sub from different maps, paths, or prohibited types'
is reworked into more specific/differentiated error messages for better
guidance.
* The change into 'value -4294967168 makes map_value pointer be out of
bounds' is due to moving the mixed bounds check into the speculation
handling and thus occuring slightly later than above mentioned sanity
check.
* The change into 'math between map_value pointer and register with
unbounded min value' is similarly due to register sanity check coming
before the mixed bounds check.
* The case of 'map access: known scalar += value_ptr from different maps'
now loads fine given masks are the same from the different paths (despite
max map value size being different).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
This work tightens the offset mask we use for unprivileged pointer arithmetic
in order to mitigate a corner case reported by Piotr and Benedict where in
the speculative domain it is possible to advance, for example, the map value
pointer by up to value_size-1 out-of-bounds in order to leak kernel memory
via side-channel to user space.
Before this change, the computed ptr_limit for retrieve_ptr_limit() helper
represents largest valid distance when moving pointer to the right or left
which is then fed as aux->alu_limit to generate masking instructions against
the offset register. After the change, the derived aux->alu_limit represents
the largest potential value of the offset register which we mask against which
is just a narrower subset of the former limit.
For minimal complexity, we call sanitize_ptr_alu() from 2 observation points
in adjust_ptr_min_max_vals(), that is, before and after the simulated alu
operation. In the first step, we retieve the alu_state and alu_limit before
the operation as well as we branch-off a verifier path and push it to the
verification stack as we did before which checks the dst_reg under truncation,
in other words, when the speculative domain would attempt to move the pointer
out-of-bounds.
In the second step, we retrieve the new alu_limit and calculate the absolute
distance between both. Moreover, we commit the alu_state and final alu_limit
via update_alu_sanitation_state() to the env's instruction aux data, and bail
out from there if there is a mismatch due to coming from different verification
paths with different states.
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Reported-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Benedict Schlueter <benedict.schlueter@rub.de>
|
|
Add a small sanitize_needed() helper function and move sanitize_val_alu()
out of the main opcode switch. In upcoming work, we'll move sanitize_ptr_alu()
as well out of its opcode switch so this helps to streamline both.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move the bounds check in adjust_ptr_min_max_vals() into a small helper named
sanitize_check_bounds() in order to simplify the former a bit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Consolidate all error handling and provide more user-friendly error messages
from sanitize_ptr_alu() and sanitize_val_alu().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Small refactor with no semantic changes in order to consolidate the max
ptr_limit boundary check.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
The mixed signed bounds check really belongs into retrieve_ptr_limit()
instead of outside of it in adjust_ptr_min_max_vals(). The reason is
that this check is not tied to PTR_TO_MAP_VALUE only, but to all pointer
types that we handle in retrieve_ptr_limit() and given errors from the latter
propagate back to adjust_ptr_min_max_vals() and lead to rejection of the
program, it's a better place to reside to avoid anything slipping through
for future types. The reason why we must reject such off_reg is that we
otherwise would not be able to derive a mask, see details in 9d7eceede769
("bpf: restrict unknown scalars of mixed signed bounds for unprivileged").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Small refactor to drag off_reg into sanitize_ptr_alu(), so we later on can
use off_reg for generalizing some of the checks for all pointer types.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
We forbid adding unknown scalars with mixed signed bounds due to the
spectre v1 masking mitigation. Hence this also needs bypass_spec_v1
flag instead of allow_ptr_leaks.
Fixes: 2c78ee898d8f ("bpf: Implement CAP_BPF")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
The current sched_slice() seems to have issues; there's two possible
things that could be improved:
- the 'nr_running' used for __sched_period() is daft when cgroups are
considered. Using the RQ wide h_nr_running seems like a much more
consistent number.
- (esp) cgroups can slice it real fine, which makes for easy
over-scheduling, ensure min_gran is what the name says.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.611897312@infradead.org
|
|
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.548833671@infradead.org
|
|
Stop polluting sysctl, move to debugfs for SCHED_DEBUG stuff.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/YHgB/s4KCBQ1ifdm@hirez.programming.kicks-ass.net
|
|
Implement debugfs_create_str() to easily display names and such in
debugfs.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.415407080@infradead.org
|
|
Move the #ifdef SCHED_DEBUG bits to kernel/sched/debug.c in order to
collect all the debugfs bits.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.353833279@infradead.org
|
|
Stop polluting sysctl with undocumented knobs that really are debug
only, move them all to /debug/sched/ along with the existing
/debug/sched_* files that already exist.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.287610138@infradead.org
|
|
SCHED_DEBUG is not in fact required for LATENCYTOP, don't select it.
Suggested-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.224578981@infradead.org
|
|
CONFIG_SCHEDSTATS does not depend on SCHED_DEBUG, it is inconsistent
to have the sysctl depend on it.
Suggested-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.161151631@infradead.org
|
|
The ability to enable/disable NUMA balancing is not a debugging feature
and should not depend on CONFIG_SCHED_DEBUG. For example, machines within
a HPC cluster may disable NUMA balancing temporarily for some jobs and
re-enable it for other jobs without needing to reboot.
This patch removes the dependency on CONFIG_SCHED_DEBUG for
kernel.numa_balancing sysctl. The other numa balancing related sysctls
are left as-is because if they need to be tuned then it is more likely
that NUMA balancing needs to be fixed instead.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210324133916.GQ15768@suse.de
|
|
Use the new cpu_dying() state to simplify and fix the balance_push()
vs CPU hotplug rollback state.
Specifically, we currently rely on notifiers sched_cpu_dying() /
sched_cpu_activate() to terminate balance_push, however if the
cpu_down() fails when we're past sched_cpu_deactivate(), it should
terminate balance_push at that point and not wait until we hit
sched_cpu_activate().
Similarly, when cpu_up() fails and we're going back down, balance_push
should be active, where it currently is not.
So instead, make sure balance_push is enabled below SCHED_AP_ACTIVE
(when !cpu_active()), and gate it's utility with cpu_dying().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/YHgAYef83VQhKdC2@hirez.programming.kicks-ass.net
|
|
Introduce a cpumask that indicates (for each CPU) what direction the
CPU hotplug is currently going. Notably, it tracks rollbacks. Eg. when
an up fails and we do a roll-back down, it will accurately reflect the
direction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210310150109.151441252@infradead.org
|
|
Prepare for addition of another mask. Primarily a code movement to
avoid having to create more #ifdef, but while there, convert
everything with an argument to an inline function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210310150109.045447765@infradead.org
|
|
Current riscv's kprobe handlers are run with both preemption and
interrupt enabled, this violates kprobe requirements. Fix this issue
by keeping interrupts disabled for BREAKPOINT exception.
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
[Palmer: add a comment]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Currently, the riscv's kprobes(powerred by ftrace) handler is
preemptible. Futher check indicates we miss something similar as the
commit c536aa1c5b17 ("kprobes/ftrace: Add recursion protection to the
ftrace callback"), so do similar modifications as the commit does.
Fixes: 829adda597fe ("riscv: Add KPROBES_ON_FTRACE supported")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
These two functions are used to implement the kprobes feature so they
can't be kprobed.
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
There is a spelling mistake when SPARSEMEM Kconfig copy.
Fixes: a5406a7ff56e ("riscv: Correct SPARSEMEM configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The "Register Offset Low" register of a "DVSEC Register Locator"
contains the 64K aligned offset for the registers along with the BAR
indicator and an id. The implementation was treating the "Register Block
Offset Low" field a value rather than as a pre-aligned component of the
64-bit offset. So, just mask, don't mask and shift (FIELD_GET).
The user visible result of this bug is that the driver fails to bind to
the device after none of the required blocks are found.
This was missed earlier because the primary development done in the QEMU
environment only uses 0 offsets, i.e. 0 shifted is still 0.
Fixes: 8adaf747c9f0 ("cxl/mem: Find device capabilities")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210415232610.603273-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
snd_una update should not be done when the same skb is being
sent out.chcr_short_record_handler() sends it again even
though SND_UNA update is already sent for the skb in
chcr_ktls_xmit(), which causes mismatch in un-acked
TCP seq number, later causes problem in sending out
complete record.
Fixes: 429765a149f1 ("chcr: handle partial end part of a record")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HW doesn't need marking TCB closed. This TCB state change
sometimes causes problem to the new connection which gets
the same tid.
Fixes: 34aba2c45024 ("cxgb4/chcr : Register to tls add and del callback")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sge queue is full and chcr_ktls_xmit_wr_complete()
returns failure, skb is not freed if it is not the last tls record in
this skb, causes refcount never gets freed and tls_dev_del()
never gets called on this connection.
Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Taking page refcount is not ideal and causes kernel panic
sometimes. It's better to take tx_ctx lock for the complete
skb transmit, to avoid page cleanup if ACK received in middle.
Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
YueHaibing
Linus Torvalds
Fredrik Strupe
Peter Zijlstra
Dan Williams
Florian Westphal
Randy Dunlap
Johannes Berg
Christophe Leroy
Zack Rusin
John Paul Adrian Glaubitz
John Paul Adrian Glaubitz
Walter Wu
Arnd Bergmann
Lijun Pan
Daniel Borkmann
Mel Gorman
Jisheng Zhang
Kefeng Wang
Ben Widawsky
Vinay Kumar Yadav