aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-05-21ARM: shmobile: lager dts: Replace "nor-jedec" by "jedec,spi-nor"Geert Uytterhoeven1-1/+1
Cfr. commit 8947e396a8296c52 ('Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"') Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-12ARM: shmobile: r8a7791: Enable DMA for HSUSBYoshihiro Shimoda1-0/+3
This patch adds DMA properties to the HSUSB node. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-12ARM: shmobile: r8a7791: add USB-DMAC device nodesYoshihiro Shimoda1-0/+22
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-12ARM: shmobile: r8a7790: Enable DMA for HSUSBYoshihiro Shimoda1-0/+3
This patch adds DMA properties to the HSUSB node. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-12ARM: shmobile: r8a7790: add USB-DMAC device nodesYoshihiro Shimoda1-0/+22
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: kzm9g dts: Configure the HOME key as wake-up sourceGeert Uytterhoeven1-0/+1
Note that from now on any of the pfc8575 gpio keys will wake up the system, as the pfc8575 cannot mask individual interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: koelsch dts: Use generic names for device nodesGeert Uytterhoeven1-1/+1
sound-codec -> codec Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: lager dts: Use generic names for device nodesGeert Uytterhoeven1-1/+1
sound-codec -> codec Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: bockw dts: Use generic names for device nodesGeert Uytterhoeven1-1/+1
sound-codec -> codec Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: koelsch dts: Add "nor-jedec" compatible valueGeert Uytterhoeven1-1/+1
Spansion s25fl512s is compatible with "nor-jedec". Hence add the "nor-jedec" compatible value, so the driver can bind against the generic name, cfr. commit 8ff16cf77ce314c2 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: bockw dts: Add "nor-jedec" compatible valueGeert Uytterhoeven1-1/+1
Spansion s25fl008k is compatible with "nor-jedec". Hence add the "nor-jedec" compatible value, so the driver can bind against the generic name, cfr. commit 8ff16cf77ce314c2 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: lager dts: Add "nor-jedec" compatible valueGeert Uytterhoeven1-1/+1
Spansion s25fl512s is compatible with "nor-jedec". Hence add the "nor-jedec" compatible value, so the driver can bind against the generic name, cfr. commit 8ff16cf77ce314c2 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: bockw-reference dts: Add "nor-jedec" compatible valueGeert Uytterhoeven1-1/+1
Spansion s25fl008k is compatible with "nor-jedec". Hence add the "nor-jedec" compatible value, so the driver can bind against the generic name, cfr. commit 8ff16cf77ce314c2 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: henninger dts: Add "nor-jedec" compatible valueGeert Uytterhoeven1-1/+1
Spansion s25fl512s is compatible with "nor-jedec". Hence add the "nor-jedec" compatible value, so the driver can bind against the generic name, cfr. commit 8ff16cf77ce314c2 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: armadillo800eva dts: Use generic names for device nodesGeert Uytterhoeven1-1/+1
wm8978 -> codec Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: marzen dts: Use generic names for device nodesGeert Uytterhoeven1-3/+3
lan0 -> ethernet Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: kzm9d dts: Use generic names for device nodesGeert Uytterhoeven1-2/+2
lan9220 -> ethernet uart -> serial Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: ape6evm dts: Use generic names for device nodesGeert Uytterhoeven1-1/+1
max8973 -> regulator Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: sh73a0 dtsi: Use generic names for device nodesGeert Uytterhoeven1-4/+4
irqpin -> interrupt-controller Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7791 dtsi: Use generic names for device nodesGeert Uytterhoeven1-1/+1
rcar_sound -> sound Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7790 dtsi: Use generic names for device nodesGeert Uytterhoeven1-1/+1
rcar_sound -> sound Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7779 dtsi: Use generic names for device nodesGeert Uytterhoeven1-1/+1
irqpin -> interrupt-controller Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7778 dtsi: Use generic names for device nodesGeert Uytterhoeven1-1/+1
irqpin -> interrupt-controller Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7740 dtsi: Use generic names for device nodesGeert Uytterhoeven1-4/+4
irqpin -> interrupt-controller Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7794: Add IRQC clock to device treeGeert Uytterhoeven2-0/+12
Link the external IRQ controller irqc0 to the IRQC module clock, so it can be power managed using that clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7791: Add IRQC clock to device treeGeert Uytterhoeven2-0/+12
Link the external IRQ controller irqc0 to the IRQC module clock, so it can be power managed using that clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7790: Add IRQC clock to device treeGeert Uytterhoeven2-0/+12
Link the external IRQ controller irqc0 to the IRQC module clock, so it can be power managed using that clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a73a4: Add IRQC clock to device treeGeert Uytterhoeven2-4/+8
Link the external IRQ controllers irqc0 and irqc1 to the IRQC module clock, so they can be power managed using that clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [horms: corrected typo in changelog to refer to r8a73a4] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-28ARM: shmobile: sh73a0 dtsi: Fix SCIFB namingGeert Uytterhoeven1-1/+1
The single SCIFB on SH-Mobile AG5 is called "scifb", not "scifb8". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-28ARM: shmobile: r8a7740 dtsi: Fix SCIFB namingGeert Uytterhoeven1-1/+1
The single SCIFB on R-Mobile A1 is called "scifb", not "scifb8". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-27ARM: shmobile: r8a7791: Remove MSIOF address from device treeRyo Kataoka2-4/+4
MSIOF Base Address H'E6xx can be accessed by CPU and DMAC. MSIOF Base Address H'E7xx for DMAC was removed from H/W manual. Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-27ARM: shmobile: r8a7790: Remove MSIOF address from device treeRyo Kataoka1-4/+4
MSIOF Base Address H'E6xx can be accessed by CPU and DMAC. MSIOF Base Address H'E7xx for DMAC was removed from H/W manual. Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-26Linux 4.1-rc1Linus Torvalds1-2/+2
2015-04-26x86_64, asm: Work around AMD SYSRET SS descriptor attribute issueAndy Lutomirski5-0/+48
AMD CPUs don't reinitialize the SS descriptor on SYSRET, so SYSRET with SS == 0 results in an invalid usermode state in which SS is apparently equal to __USER_DS but causes #SS if used. Work around the issue by setting SS to __KERNEL_DS __switch_to, thus ensuring that SYSRET never happens with SS set to NULL. This was exposed by a recent vDSO cleanup. Fixes: e7d6eefaaa44 x86/vdso32/syscall.S: Do not load __USER32_DS to %ss Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Brian Gerst <brgerst@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-26v4l: xilinx: fix for include file movementStephen Rothwell1-1/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-24platform/chrome: chromeos_laptop - instantiate Atmel at primary addressDmitry Torokhov1-9/+26
The new Atmel MXT driver expects i2c client's address contain the primary (main address) of the chip, and calculates the expected bootloader address form the primary address. Unfortunately chrome_laptop does probe the devices and if touchpad (or touchscreen, or both) comes up in bootloader mode the i2c device gets instantiated with the bootloader address which confuses the driver. To work around this issue let's probe the primary address first. If the device is not detected at the primary address we'll probe alternative addresses as "dummy" devices. If any of them are found, destroy the dummy client and instantiate client with proper name at primary address still. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-24RCU pathwalk breakage when running into a symlink overmounting somethingAl Viro1-2/+4
Calling unlazy_walk() in walk_component() and do_last() when we find a symlink that needs to be followed doesn't acquire a reference to vfsmount. That's fine when the symlink is on the same vfsmount as the parent directory (which is almost always the case), but it's not always true - one _can_ manage to bind a symlink on top of something. And in such cases we end up with excessive mntput(). Cc: stable@vger.kernel.org # since 2.6.39 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-24fix I_DIO_WAKEUP definitionEric Sandeen1-1/+1
I_DIO_WAKEUP is never directly used, but fix it up anyway. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-24direct-io: only inc/dec inode->i_dio_count for file systemsJens Axboe9-33/+50
do_blockdev_direct_IO() increments and decrements the inode ->i_dio_count for each IO operation. It does this to protect against truncate of a file. Block devices don't need this sort of protection. For a capable multiqueue setup, this atomic int is the only shared state between applications accessing the device for O_DIRECT, and it presents a scaling wall for that. In my testing, as much as 30% of system time is spent incrementing and decrementing this value. A mixed read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with better latencies too. Before: clat percentiles (usec): | 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34], | 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35], | 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80], | 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155], | 99.99th=[ 165] After: clat percentiles (usec): | 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149], | 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171], | 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270], | 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422], | 99.99th=[ 438] In other setups, Robert Elliott reported seeing good performance improvements: https://lkml.org/lkml/2015/4/3/557 The more applications accessing the device, the worse it gets. Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells do_blockdev_direct_IO() that it need not worry about incrementing or decrementing the inode i_dio_count for this caller. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Elliott, Robert (Server Storage) <elliott@hp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-24fs/9p: fix readdir()Johannes Berg1-0/+2
Al Viro's IOV changes broke 9p readdir() because the new code didn't abort the read when it returned nothing. The original code checked if the combined error/length was <= 0 but in the new code that accidentally got changed to just an error check. Add back the return from the function when nothing is read. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: e1200fe68f20 ("9p: switch p9_client_read() to passing struct iov_iter *") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-24Btrfs: prevent list corruption during free space cache processingChris Mason1-14/+18
__btrfs_write_out_cache is holding the ctl->tree_lock while it prepares a list of bitmaps to record in the free space cache. It was dropping the lock while it worked on other components, which made a window for free_bitmap() to free the bitmap struct without removing it from the list. This changes things to hold the lock the whole time, and also makes sure we hold the lock during enospc cleanup. Reported-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-04-24toshiba_acpi: Do not register vendor backlight when acpi_video bl is availableHans de Goede2-0/+25
commit a39f46df33c6 ("toshiba_acpi: Fix regression caused by backlight extra check code") causes the backlight to no longer work on the Toshiba Z30, reverting that commit fixes this but restores the original issue fixed by that commit. Looking at the toshiba_acpi backlight code for a fix for this I noticed that the toshiba code is the only code under platform/x86 which unconditionally registers a vendor acpi backlight interface, without checking for acpi_video backlight support first. This commit adds the necessary checks bringing toshiba_acpi in line with the other drivers, and fixing the Z30 regression without needing to revert the commit causing it. Chances are that there will be some Toshiba models which have a non working acpi-video implementation while the toshiba vendor backlight interface does work, this commit adds an empty dmi_id table where such systems can be added, this is identical to how other drivers handle such systems. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1206036 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=86521 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-and-tested-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-04-24x86: fix special __probe_kernel_write() tail zeroing caseLinus Torvalds1-1/+1
Commit cae2a173fe94 ("x86: clean up/fix 'copy_in_user()' tail zeroing") fixed the failure case tail zeroing of one special case of the x86-64 generic user-copy routine, namely when used for the user-to-user case ("copy_in_user()"). But in the process it broke an even more unusual case: using the user copy routine for kernel-to-kernel copying. Now, normally kernel-kernel copies are obviously done using memcpy(), but we have a couple of special cases when we use the user-copy functions. One is when we pass a kernel buffer to a regular user-buffer routine, using set_fs(KERNEL_DS). That's a "normal" case, and continued to work fine, because it never takes any faults (with the possible exception of a silent and successful vmalloc fault). But Jan Beulich pointed out another, very unusual, special case: when we use the user-copy routines not because it's a path that expects a user pointer, but for a couple of ftrace/kgdb cases that want to do a kernel copy, but do so using "unsafe" buffers, and use the user-copy routine to gracefully handle faults. IOW, for probe_kernel_write(). And that broke for the case of a faulting kernel destination, because we saw the kernel destination and wanted to try to clear the tail of the buffer. Which doesn't work, since that's what faults. This only triggers for things like kgdb and ftrace users (eg trying setting a breakpoint on read-only memory), but it's definitely a bug. The fix is to not compare against the kernel address start (TASK_SIZE), but instead use the same limits "access_ok()" uses. Reported-and-tested-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org # 4.0 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-24crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMAGeert Uytterhoeven1-1/+2
If NO_DMA=y: drivers/built-in.o: In function `img_hash_write_via_dma_stop': img-hash.c:(.text+0xa2b822): undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `img_hash_xmit_dma': img-hash.c:(.text+0xa2b8d8): undefined reference to `dma_map_sg' img-hash.c:(.text+0xa2b948): undefined reference to `dma_unmap_sg' Also move the "depends" section below the "tristate" line while we're at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-24crypto: x86/sha512_ssse3 - fixup for asm function prototype changeArd Biesheuvel1-1/+1
Patch e68410ebf626 ("crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer") changed the prototypes of the core asm SHA-512 implementations so that they are compatible with the prototype used by the base layer. However, in one instance, the register that was used for passing the input buffer was reused as a scratch register later on in the code, and since the input buffer param changed places with the digest param -which needs to be written back before the function returns- this resulted in the scratch register to be dereferenced in a memory write operation, causing a GPF. Fix this by changing the scratch register to use the same register as the input buffer param again. Fixes: e68410ebf626 ("crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer") Reported-By: Bobby Powers <bobbypowers@gmail.com> Tested-By: Bobby Powers <bobbypowers@gmail.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-24nios2: rework cacheLey Foon Tan3-17/+57
- flush dcache before flush instruction cache - remork update_mmu_cache and flush_dcache_page - add shmparam.h Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-24nios2: Add types.h header required for __u32 typeEzequiel Garcia1-0/+2
Reported by the header checker (CONFIG_HEADERS_CHECK=y): CHECK usr/include/asm/ (31 files) ./usr/include/asm/ptrace.h:77: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Ley Foon Tan <lftan@altera.com>
2015-04-24ALSA: hda - fix headset mic detection problem for one more machineHui Wang1-9/+15
We have two machines with alc256 codec in the pin quirk table, so moving the common pins to ALC256_STANDARD_PINS. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1447909 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-24eth: bf609 eth clock: add pclk clock for stmmac driver probeSteven Miao1-0/+7
Signed-off-by: Steven Miao <realmz6@gmail.com>
2015-04-24blackfin: Wire up missing syscallsChen Gang2-1/+21
The related syscalls are below which may cause samples/kdbus building break in next-20150401 tree, the related information and error: CALL scripts/checksyscalls.sh <stdin>:1223:2: warning: #warning syscall kcmp not implemented [-Wcpp] <stdin>:1226:2: warning: #warning syscall finit_module not implemented [-Wcpp] <stdin>:1229:2: warning: #warning syscall sched_setattr not implemented [-Wcpp] <stdin>:1232:2: warning: #warning syscall sched_getattr not implemented [-Wcpp] <stdin>:1235:2: warning: #warning syscall renameat2 not implemented [-Wcpp] <stdin>:1238:2: warning: #warning syscall seccomp not implemented [-Wcpp] <stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp] <stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp] <stdin>:1247:2: warning: #warning syscall bpf not implemented [-Wcpp] <stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp] [...] HOSTCC samples/kdbus/kdbus-workers samples/kdbus/kdbus-workers.c: In function ‘prime_new’: samples/kdbus/kdbus-workers.c:930:18: error: ‘__NR_memfd_create’ undeclared (first use in this function) p->fd = syscall(__NR_memfd_create, "prime-area", MFD_CLOEXEC); ^ samples/kdbus/kdbus-workers.c:930:18: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.