aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-01-23MIPS: Watch: Avoid duplication of bits in mips_read_watch_registersMatt Redfearn1-8/+6
Currently the bits to be masked when watchhi is read is defined inline for each register. To avoid this, define the bits once and mask each register with that value. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18158/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-23MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers.Matt Redfearn1-10/+7
Currently the bits to be set in the watchhi register in addition to that requested by the user is defined inline for each register. To avoid this, define the bits once and or that in for each register. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18157/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-22MIPS: MSA: Update helpers to use new asm macrosJames Hogan1-44/+19
Update MSA control register access helpers to use the new helpers for parsing register names and creating custom assembly macro instructions. This allows the move via $at to be dropped (saving a total of about 20 bytes of kernel code). Note, this does not alter the equivalent code in .S files, which still uses the $at trick. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17776/
2018-01-22MIPS: XPA: Standardise readx/writex accessorsJames Hogan1-10/+10
Now that we are using assembler macros to implement XPA instructions on toolchains which don't support them, pass Cop0 register names to the __{readx,writex}_32bit_c0_register macros in $n format rather than register numbers. Also pass a register select which may be useful in future (for example for MemoryMapID field of WatchHi registers on I6500). This is to make them consistent with the normal Cop0 register access macros which they were originally based on. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17777/
2018-01-22MIPS: XPA: Allow use of $0 (zero) to MTHC0James Hogan1-2/+2
Tweak __writex_32bit_c0_register() to allow the compiler to use $0 (the zero register) as an input to the mthc0 instruction. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17774/
2018-01-22MIPS: XPA: Use XPA instructions in assemblyJames Hogan2-10/+22
Utilise XPA instructions MFHC0 & MTHC0 in inline assembly instead of directly encoding them with the _ASM_INSN* macros, and transparently implement these instructions as assembler macros if the toolchain doesn't support them natively, using the recently introduced assembler macro helpers. The old direct encodings were restricted to using the register $at, so this allows the extra register moves to go away (saving a grand total of 24 bytes). Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17775/
2018-01-22MIPS: VZ: Pass GC0 register names in $n formatJames Hogan1-188/+188
Now that we are using assembler macros to implement VZ instructions on toolchains which don't support them, pass VZ guest Cop0 register names to the __{read,write}_{32bit,ulong,64bit}_gc0_register macros in $n format rather than register numbers. This is to make them consistent with the normal root Cop0 register access macros which they were originally based on. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17773/
2018-01-22MIPS: VZ: Update helpers to use new asm macrosJames Hogan1-127/+37
Update VZ guest register & guest TLB access helpers to use the new assembly macros for parsing register names and creating custom assembly macro instructions, which has a number of advantages: - Better code can be generated on toolchains which don't support VZ, more closely matching those which do, since there is no need to bounce values via the $at register. Some differences still remain due to the inability to safely fill branch delay slots and R6 compact branch forbidden slots with explicitly encoded instructions, resulting in some extra NOPs added by the assembler. - Some code duplication between toolchains which do and don't support VZ instructions is removed, since the helpers are only implemented once. When the toolchain doesn't implement the instruction an assembly macro implements it instead. - Instruction encodings are kept together in the source. On a generic kernel with KVM VZ support enabled this change saves about 2.5KiB of kernel code when TOOLCHAIN_SUPPORTS_VIRT=n, bringing it down to about 0.5KiB more than when TOOLCHAIN_SUPPORTS_VIRT=y on r6, and just 68 bytes more on r2. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17772/
2018-01-22MIPS: Add helpers for assembler macro instructionsJames Hogan1-0/+83
Implement a parse_r assembler macro in asm/mipsregs.h to parse a register in $n form, and a few C macros for defining assembler macro instructions. These can be used to more transparently support older binutils versions which don't support for example the msa, virt, xpa, or crc instructions. In particular they overcome the difficulty of turning a register name in $n form into an instruction encoding suitable for giving to .word / .hword, which is particularly problematic when needed from inline assembly where the compiler is responsible for register allocation. Traditionally this had required the use of $at and an extra MOV instruction, but for CRC instructions with multiple GP register operands that approach becomes more difficult. Three assembler macro creation helpers are added: - _ASM_MACRO_0(OP, ENC) This is to define an assembler macro for an instruction which has no operands, for example the VZ TLBGR instruction. - _ASM_MACRO_2R(OP, R1, R2, ENC) This is to define an assembler macro for an instruction which has 2 register operands, for example the CFCMSA instruction. - _ASM_MACRO_3R(OP, R1, R2, R3, ENC) This is to define an assembler macro for an instruction which has 3 register operands, for example the crc32 instructions. - _ASM_MACRO_2R_1S(OP, R1, R2, SEL3, ENC) This is to define an assembler macro for a Cop0 move instruction, with 2 register operands and an optional register select operand which defaults to 0, for example the VZ MFGC0 instruction. Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marcin Nowakowski <marcin.nowakowski@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17770/
2018-01-22MIPS: ranchu: Add Ranchu as a new generic-based boardMiodrag Dinic5-0/+140
Provide amendments to the MIPS generic platform framework so that the new generic-based board Ranchu can be chosen to be built. The Ranchu board is intended to be used by Android emulator. The name "Ranchu" originates from Android development community. "Goldfish" and "Ranchu" are terms used for two generations of virtual boards used by Android emulator. The name "Ranchu" is a newer one among the two, and this patch deals with Ranchu. However, for historical reasons, some devices/drivers still contain the name "Goldfish". MIPS Ranchu machine includes a number of Goldfish devices. The support for Virtio devices is also included. Ranchu board supports up to 16 Virtio devices which can be attached using Virtio MMIO Bus. This is summarized in the following picture: ABUS ||----MIPS CPU || | IRQs ||----Goldfish PIC------------(32)-------- || | | | | | | | | | ||----Goldfish TTY------ | | | | | | | | || | | | | | | | | ||----Goldfish RTC-------- | | | | | | | || | | | | | | | ||----Goldfish FB----------- | | | | | | || | | | | | | ||----Goldfish Events--------- | | | | | || | | | | | ||----Goldfish Audio------------ | | | | || | | | | ||----Goldfish Battery------------ | | | || | | | ||----Android PIPE------------------ | | || | | ||----Virtio MMIO Bus | | || | | | | | || | | (virtio-block)--------- | || (16) | | || | (virtio-net)------------------ Device Tree is created on the QEMU side based on the information about devices IO map and IRQ numbers. Kernel will load this DTB using UHI boot protocol DTB handover mode. Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com> Signed-off-by: Goran Ferenc <goran.ferenc@mips.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18138/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: Use proper kernel-doc Return keywordMathieu Malaterre1-1/+1
For reference: * https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#function-documentation Fix non-fatal warning: arch/mips/kernel/branch.c:418: warning: Excess function parameter 'returns' description in '__compute_return_epc_for_insn' Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18031/ [jhogan@kernel.org: Expand subject slightly] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: Loongson64: Drop 32-bit support for Loongson 2E/2F devicesJiaxun Yang1-2/+0
The 32-bit support was broken at runtime, it doesn't boot anymore, witch is hard to debug because even early printk isn't working, also there are some build warnings. Some newer bootloader may not support 32-bit ELF. So we decide to drop 32-bit support. Make loongson64 a pure 64-bit arch. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18174/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Initial GCW Zero supportPaul Cercueil4-0/+94
The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused handheld game console, successfully kickstarted in ~2012, running Linux. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Mathieu Malaterre <malat@debian.org> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18490/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18devicetree/bindings: Add GCW vendor prefixPaul Cercueil1-0/+1
Game Consoles Worldwide, mostly known under the acronym GCW, is the creator of the GCW Zero open-source video game system. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Rob Herring <robh@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18489/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: JZ4770: Work around config2 misreporting associativityMaarten ter Huurne1-0/+9
According to config2, the associativity would be 5-ways, but the documentation states 4-ways, which also matches the documented L2 cache size of 256 kB. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18488/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Initial JZ4770 supportPaul Cercueil3-1/+219
Provide just enough bits (clocks, clocksource, uart) to allow a kernel to boot on the JZ4770 SoC to a initramfs userspace. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18487/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Detect machtype from SoC compatible stringPaul Cercueil2-4/+19
Previously, the mips_machtype variable was always initialized to MACH_INGENIC_JZ4740 even if running on different SoCs. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18486/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: platform: add machtype IDs for more Ingenic SoCsPaul Cercueil1-0/+2
Add a machtype ID for the JZ4780 SoC, which was missing, and one for the newly supported JZ4770 SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18485/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Use common cmdline handling codePaul Burton1-22/+2
jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to arcs_cmdline, up to argc (in fw_arg0). The common code in fw_init_cmdline will do the exact same thing when run on a system where fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't use it). Remove the custom implementation & use the generic code. Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18484/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: Setup boot_command_line before plat_mem_setupPaul Burton1-19/+20
Platforms using DT will typically call __dt_setup_arch from plat_mem_setup. This in turn calls early_init_dt_scan. When CONFIG_CMDLINE is set, this leads to its value being copied into boot_command_line by early_init_dt_scan_chosen. If this happens before the code setting up boot_command_line in arch_mem_init runs, that code will go on to append CONFIG_CMDLINE (via builtin_cmdline) to boot_command_line again, duplicating it. For some command line parameters (eg. earlycon) this can be a problem. Set up boot_command_line before early_init_dt_scan_chosen gets called such that it will not write CONFIG_CMDLINE in this scenario & the arguments aren't duplicated. Signed-off-by: Paul Burton <paul.burton@mips.com> Acked-by: Mathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18483/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18clk: Add Ingenic jz4770 CGU driverPaul Cercueil2-0/+484
Add support for the clocks provided by the CGU in the Ingenic JZ4770 SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18482/ Signed-off-by: James Hogan <jhogan@kernel.org>