| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When we have write support enabled, we must not drop inodes before they
have been written back, otherwise we lose updates to the filesystem on
umount. Keep the inodes around unless we are built in read-only mode,
or we are mounted read-only.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Implement big directory entry update support in the same way that we
do for new directories.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When reading a big directory, calculate the validate the directory
checkbyte to ensure that the directory contents are valid.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Strengthen the directory validation by ensuring that the header fields
contain sensible values that fit inside the directory, and limit the
directory size to 4MB as per RISC OS requirements.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Extract the directory validation from the directory reading function as
we will want to re-use this code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Factor out the directory entry byte offset calculation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
After changing a directory, we need to update the sequence numbers and
calculate the new check byte before the directory is scheduled to be
written back to the media. Since this needs to happen for any change
to the directory, move this into a separate method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__adfs_dir_put() and adfs_dir_find_entry() are only called from
adfs_f_update(), so move them into this function, removing some
unnecessary entry copying by doing so.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
adfs_dir_read() is only called from adfs_f_read(), so merge it into
that function. As new directories are always 2048 bytes in size,
(which we rely on elsewhere) we can consolidate some of the code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Check that the lastmask and reserved fields are all zero, as per the
documentation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We have two locations where we validate the new directory format, so
factor this out to a helper.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add and use pointers in the adfs_dir structure to access the directory
head and tail structures, which will always be contiguous in a buffer.
This allows us to avoid memcpy()ing the data in the new directory code,
making it slightly more efficient.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Rather than using setpos + getnext to iterate through the directory
entries, pass iterate() down to the dir format code to populate the
dirents.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There is nothing in our readdir (aka iterate) method that relies on
the directory inode being exclusively locked, so switch to using the
iterate_shared() hook rather than iterate().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Get rid of the ifdef, using IS_ENABLED() instead to detect whether the
code should be callable. This allows the compiler to always parse the
following code, reducing the chances of errors being missed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When we update a directory, a number of errors may happen. If we failed
to find the entry to update, we can just release the directory buffers
as normal.
However, if we have some other error, we may have partially updated the
buffers, resulting in an invalid directory. In this case, we need to
discard the buffers to avoid writing the contents back to the media, and
later re-read the directory from the media.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use __u8 and pack the structures for on-disk directories.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Update directory locking such that it covers the validation of the
directory, which could fail if another thread is concurrently writing
to the same directory. Since we may sleep, we need to use a rwsem
rather than a rw spinlock.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Provide a helper for marking directory buffers dirty so they get
written back to disk.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add a helper to read a directory using the inode, which we do in two
places.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Both directory formats code the mechanics of fetching the directory
buffers using their own implementations. Consolidate these into one
implementation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Directories can span multiple buffers, and we currently open-code
memcpy access to these buffers, including dealing with entries that
are split across multiple buffers. Such code exists in both
directory format implementations.
Provide common functions to allow data to be copied from/to the
directory buffers as if they were a contiguous set of buffers, and
use them when accessing directories.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
adfs_fplus_sync() can be used for both directory formats since we now
have a common way to access the buffer heads, so move it into dir.c
and appropriately rename it. Remove the directory-format specific
implementations.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
With the bhs pointer in place, we have no need for separate per-format
free() methods, since a generic version will do. Provide a generic
implementation, remove the format specific implementations and the
method function pointer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Initialise the dir object before we pass it down to the directory format
specific read handler. This allows us to get rid of the initialisation
inside those handlers.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Rename bh_fplus to bhs in preparation to make some of the directory
handling code sharable between implementations.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When scanning the map for a fragment id, we need to keep track of the
free space links, so we don't inadvertently believe that the freespace
link is a valid fragment id.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move map specific superblock initialisation to map.c, rather than
having it spread into super.c.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use find_next_bit_le() to find the end of a fragment in the map rather
than open-coding this functionality.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
lookup_zone() and scan_free_map() cope in different ways with the
location of the map data within a zone:
1. lookup_zone() adds a four byte offset to the map data pointer to
skip over the check and free link bytes.
2. scan_free_map() needs to use the free link pointer, which is an
offset from itself, so we end up adding a 32-bit offset to the
end pointer (aka mapsize) which is really confusing.
Rename mapsize to endbit as this is really what it is, and incorporate
the 32-bit offset into the map layout. This means that both dm_startbit
and dm_endbit are now bit offsets from the start of the buffer, rather
than four bytes in to the buffer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We have several places which deal with releasing the map buffers and
freeing the map array. Provide a helper for this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Split up adfs_read_map() into separate helpers to layout the map,
read the map, and release the map buffers.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
adfs_map_free() is not obvious whether it is freeing the map or
returning the number of free blocks on the filesystem. Rename it to
the more generic statfs() to make it clear that it's a statistic
function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Keep all the map code together in map.c, rather than having some in
super.c
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fix adfs_mode2atts() to actually update the file permissions on the
media rather than using the current inode mode. Note also that
directories do not have read/write permissions stored on the media.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Despite ADFS timestamps having centi-second granularity, and Linux
gaining fine-grained timestamp support in v2.5.48, fs/adfs was never
updated.
Update fs/adfs to centi-second support, and ensure that the inode ctime
always reflects what is written in underlying media.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
We had cases in the previous patch where we were sending the security
descriptor context on SMB3 open (file create) in cases when we hadn't
mounted with with "modefromsid" mount option.
Add check for that mount flag before calling ad_sd_context in
open init.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
In referenced fix we removed the RTL8168e-specific jumbo config for
RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in
rtl_hw_jumbo_disable().
v2: fix referenced commit id
Fixes: 14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pipe_wait() may be simple, but since it relies on the pipe lock, it
means that we have to do the wakeup while holding the lock. That's
unfortunate, because the very first thing the waked entity will want to
do is to get the pipe lock for itself.
So get rid of the pipe_wait() usage by simply releasing the pipe lock,
doing the wakeup (if required) and then using wait_event_interruptible()
to wait on the right condition instead.
wait_event_interruptible() handles races on its own by comparing the
wakeup condition before and after adding itself to the wait queue, so
you can use an optimistic unlocked condition for it.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Jiasen Lin <linjiasen@hygon.cn>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
This code is ancient, and goes back to when we only had a single page
for the pipe buffers. The exact history is hidden in the mists of time
(ie "before git", and in fact predates the BK repository too).
At that long-ago point in time, it actually helped to try to merge big
back-and-forth pipe reads and writes, and not limit pipe reads to the
single pipe buffer in length just because that was all we had at a time.
However, since then we've expanded the pipe buffers to multiple pages,
and this logic really doesn't seem to make sense. And a lot of it is
somewhat questionable (ie "hmm, the user asked for a non-blocking read,
but we see that there's a writer pending, so let's wait anyway to get
the extra data that the writer will have").
But more importantly, it makes the "go to sleep" logic much less
obvious, and considering the wakeup issues we've had, I want to make for
less of those kinds of things.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the read side version of the previous commit: it simplifies the
logic to only wake up waiting writers when necessary, and makes sure to
use a synchronous wakeup. This time not so much for GNU make jobserver
reasons (that pipe never fills up), but simply to get the writer going
quickly again.
A bit less verbose commentary this time, if only because I assume that
the write side commentary isn't going to be ignored if you touch this
code.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The pipe rework ends up having been extra painful, partly becaused of
actual bugs with ordering and caching of the pipe state, but also
because of subtle performance issues.
In particular, the pipe rework caused the kernel build to inexplicably
slow down.
The reason turns out to be that the GNU make jobserver (which limits the
parallelism of the build) uses a pipe to implement a "token" system: a
parallel submake will read a character from the pipe to get the job
token before starting a new job, and will write a character back to the
pipe when it is done. The overall job limit is thus easily controlled
by just writing the appropriate number of initial token characters into
the pipe.
But to work well, that really means that the old behavior of write
wakeups being synchronous (WF_SYNC) is very important - when the pipe
writer wakes up a reader, we want the reader to actually get scheduled
immediately. Otherwise you lose the parallelism of the build.
The pipe rework lost that synchronous wakeup on write, and we had
clearly all forgotten the reasons and rules for it.
This rewrites the pipe write wakeup logic to do the required Wsync
wakeups, but also clarifies the logic and avoids extraneous wakeups.
It also ends up addign a number of comments about what oit does and why,
so that we hopefully don't end up forgetting about this next time we
change this code.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use the new tcf_proto_check_kind() helper to make sure user
provided value is well formed.
BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:606 [inline]
BUG: KMSAN: uninit-value in string+0x4be/0x600 lib/vsprintf.c:668
CPU: 0 PID: 12358 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
__msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
string_nocheck lib/vsprintf.c:606 [inline]
string+0x4be/0x600 lib/vsprintf.c:668
vsnprintf+0x218f/0x3210 lib/vsprintf.c:2510
__request_module+0x2b1/0x11c0 kernel/kmod.c:143
tcf_proto_lookup_ops+0x171/0x700 net/sched/cls_api.c:139
tc_chain_tmplt_add net/sched/cls_api.c:2730 [inline]
tc_ctl_chain+0x1904/0x38a0 net/sched/cls_api.c:2850
rtnetlink_rcv_msg+0x115a/0x1580 net/core/rtnetlink.c:5224
netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5242
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x110f/0x1330 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
__sys_sendmsg net/socket.c:2356 [inline]
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2363
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a649
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0790795c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000045a649
RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000006
RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f07907966d4
R13: 00000000004c8db5 R14: 00000000004df630 R15: 00000000ffffffff
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
slab_alloc_node mm/slub.c:2773 [inline]
__kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x306/0xa10 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline]
netlink_sendmsg+0x783/0x1330 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
__sys_sendmsg net/socket.c:2356 [inline]
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2363
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 6f96c3c6904c ("net_sched: fix backward compatibility for TCA_KIND")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RTL8125 also requires to enable RX for WoL.
v2: add missing Fixes tag
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we receive a new packet from the guest, we check if the
src_cid is correct, but we forgot to check the dst_cid.
The host should accept only packets where dst_cid is
equal to the host CID.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe")
causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is
used in "rgmii-id" mode - the networking stops working.
Unfortunately, it's not enough to just move DT parsing code to .probe() as
it depends on phydev->interface value, which is set to correct value abter
the .probe() is completed and before calling .config_init(). So, RGMII
configuration can't be loaded from DT.
To fix and issue
- move RGMII validation code to .config_init()
- parse RGMII parameters in dp83867_of_init(), but consider them as
optional.
Fixes: ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now RX interrupt is triggered twice every time, because in
cpsw_rx_interrupt() it is asked first and then disabled. So there will be
pending interrupt always, when RX interrupt is enabled again in NAPI
handler.
Fix it by first disabling IRQ and then do ask.
Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot was once again able to crash a host by setting a very small mtu
on loopback device.
Let's make inetdev_valid_mtu() available in include/net/ip.h,
and use it in ip_setup_cork(), so that we protect both ip_append_page()
and __ip_append_data()
Also add a READ_ONCE() when the device mtu is read.
Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(),
even if other code paths might write over this field.
Add a big comment in include/linux/netdevice.h about dev->mtu
needing READ_ONCE()/WRITE_ONCE() annotations.
Hopefully we will add the missing ones in followup patches.
[1]
refcount_t: saturated; leaking memory.
WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
__warn.cold+0x2f/0x3e kernel/panic.c:582
report_bug+0x289/0x300 lib/bug.c:195
fixup_bug arch/x86/kernel/traps.c:174 [inline]
fixup_bug arch/x86/kernel/traps.c:169 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89
RSP: 0018:ffff88809689f550 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c
RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1
R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001
R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40
refcount_add include/linux/refcount.h:193 [inline]
skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999
sock_wmalloc+0xf1/0x120 net/core/sock.c:2096
ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383
udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276
inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821
kernel_sendpage+0x92/0xf0 net/socket.c:3794
sock_sendpage+0x8b/0xc0 net/socket.c:936
pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636
splice_from_pipe+0x108/0x170 fs/splice.c:671
generic_splice_sendpage+0x3c/0x50 fs/splice.c:842
do_splice_from fs/splice.c:861 [inline]
direct_splice_actor+0x123/0x190 fs/splice.c:1035
splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990
do_splice_direct+0x1da/0x2a0 fs/splice.c:1078
do_sendfile+0x597/0xd00 fs/read_write.c:1464
__do_sys_sendfile64 fs/read_write.c:1525 [inline]
__se_sys_sendfile64 fs/read_write.c:1511 [inline]
__x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441409
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409
RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005
RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180
R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..
Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Russell King
Linus Torvalds
Steve French
Heiner Kallweit
Jiasen Lin
Eric Dumazet
Stefano Garzarella
Grygorii Strashko