aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-02-05drm/dp/mst: deallocate payload on port destructionMykola Lysenko1-8/+83
This is needed to properly deallocate port payload after downstream branch get unplugged. In order to do this unplugged MST topology should be preserved, to find first alive port on path to unplugged MST topology, and send payload deallocation request to branch device of found port. For this mstb and port kref's are used in reversed order to track when port and branch memory could be freed. Added additional functions to find appropriate mstb as described above. Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: Reverse order of MST enable and clearing VC payload table.Andrey Grodzovsky1-6/+6
On DELL U3014 if you clear the table before enabling MST it sometimes hangs the receiver. Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: move GUID storage from mgr, port to only mst branchHersen Wu2-51/+38
Previous implementation does not handle case below: boot up one MST branch to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output of 1st MST, GUID is not created for 2nd MST branch. When downstream port of 2nd MST branch send upstream request, it fails because 2nd MST branch GUID is not available. New Implementation: only create GUID for MST branch and save it within Branch. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: change MST detection schemeMykola Lysenko1-18/+19
1. Get edid for all connected MST displays, not only on logical ports, in the same thread as MST topology detection is done: There are displays that have branches inside w/o logical ports. So in case another SST display connected downstream system can end-up in situation when 3 DOWN requests sent: two for ‘remote i2c read’ and one for ‘enum path resources’, making slots full. 2. Call notification callback in one place in the end of topology discovery/update: This is done to reduce number of events sent to userspace in case complex topology discovery is going, adding multiple number of connectors; 3. Remove notification callback call from short pulse interrupt processing function: This is done in order not to block interrupt processing function, in case any MST request will be made from it. Notification will be send from topology discovery/update work item. Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: Calculate MST PBN with 31.32 fixed pointHarry Wentland1-28/+39
Our PBN value overflows the 20 bits integer part of the 20.12 fixed point. We need to use 31.32 fixed point to avoid this. This happens with display clocks larger than 293122 (at 24 bpp), which we see with the Sharp (and similar) 4k tiled displays. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm: Add drm_fixp_from_fraction and drm_fixp2int_ceilHarry Wentland1-2/+51
drm_fixp_from_fraction allows us to create a fixed point directly from a fraction, rather than creating fixed point values and dividing later. This avoids overflow of our 64 bit value for large numbers. drm_fixp2int_ceil allows us to return the ceiling of our fixed point value. [airlied: squash Jordan's fix] 32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/mst: Add range check for max_payloads during initImre Deak1-0/+3
max_payload is limited by the space we have in drm_dp_mst_topology_mgr::vcpi_mask,payload_mask. We need to track max_payloads+1 IDs in these masks, see drm_dp_mst_assign_payload_id(). Add a sanity check for this. Caught by coverity. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: David Weinehall <david.weinehall@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/mst: Don't ignore the MST PBN self-test resultImre Deak1-1/+3
Otherwise this call would have no effect. Caught by Coverity. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: David Weinehall <david.weinehall@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm: fix missing reference counting decreaseInsu Yun1-0/+1
In drm_dp_mst_allocate_vcpi, it returns true in two paths, but in one path, there is no reference couting decrease. Signed-off-by: Insu Yun <wuninsu@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-03drm/amdgpu: disable uvd and vce clockgating on FijiAlex Deucher1-2/+1
Doesn't work properly yet. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sonny Jiang <sonny.jiang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-02drm/amdgpu: remove exp hardware support from icelandAlex Deucher1-5/+5
It's working now. bug: https://bugs.freedesktop.org/show_bug.cgi?id=92270 Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm/amdgpu: load MEC ucode manually on icelandAlex Deucher1-4/+10
The smc doesn't handle it. Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm/amdgpu: don't load MEC2 on topazAlex Deucher2-11/+5
Not validated. Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm/amdgpu: drop topaz support from gmc8 moduleAlex Deucher1-27/+1
topaz is actually gmc7. Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm/amdgpu: pull topaz gmc bits into gmc_v7Alex Deucher1-2/+33
Add the topaz golden settings into the gmc7 module. Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 aboveKen Wang1-1/+1
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm/amdgpu: iceland use CI based MC IPKen Wang2-4/+13
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm/amdgpu: move gmc7 support out of CIK dependencyAlex Deucher1-1/+2
It's used by iceland which is VI. Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm/amdgpu/gfx7: enable cp inst/reg error interruptsAlex Deucher1-1/+19
Enable CP register/instruction error interrupts. Useful for debugging command stream problems. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-02drm/amdgpu/gfx8: enable cp inst/reg error interruptsAlex Deucher1-0/+10
Enable CP register/instruction error interrupts. Useful for debugging command stream problems. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-02drm/amdgpu: mask out WC from BO on unsupported archesOded Gabbay1-0/+8
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm/radeon: mask out WC from BO on unsupported archesOded Gabbay1-0/+7
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm: add helper to check for wc memory supportDave Airlie1-0/+9
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-02drm: adv7511: it's HPD, not HDPWolfram Sang2-17/+17
Fix this typo, consequently used over both files :) Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Archit Taneja <architt@codeaurora.org>
2016-02-02drm: adv7511: mark ADV7511_REG_EDID_READ_CTRL volatileWolfram Sang1-0/+1
This register includes a counter which is decremented by the chip on I2C failures. Also, it is reset when powering down. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Archit Taneja <architt@codeaurora.org>
2016-02-02drm: adv7511: really enable interrupts for EDID detectionWolfram Sang1-8/+17
The interrupts for EDID_READY or DDC_ERROR were never enabled in this driver, so reading EDID always timed out when chip was powered down and interrupts were used. Fix this and also remove clearing the interrupt flags, they are cleared in POWER_DOWN mode anyhow (unlike the interrupt enable flags) according to docs and my tests. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Archit Taneja <architt@codeaurora.org>
2016-02-01drm/exynos: dp: Fix panel and bridge lookup logicJavier Martinez Canillas1-30/+25
Commit a9fa852886fd ("drm/exynos: dp: add of_graph dt binding support for panel") made the Exynos DP DT binding more consistent since the OF graph could be used to lookup either a panel or a bridge device node. Before that commit, a panel would be looked up using a phandle and a bridge using the OF graph which made the DT binding not consistent. But the patch broke the later case since not finding a panel dev node would cause the driver's to do a probe deferral instead of attempting to lookup a bridge device node associated with the remote endpoint. So instead of returning a -EPROBE_DEFER if a panel is not found, check if there's a bridge and only do a probe deferral if both aren't found. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-02-01drm: exynos: make PM functions as __maybe_unusedArnd Bergmann1-4/+2
The newly added runtime-pm support for exynos-drm encloses the pm functions in an #ifdef, but not the functions that are called from them and nowhere else, which produces warnings: drm/exynos/exynos_drm_dsi.c:733:13: warning: 'exynos_dsi_disable_clock' defined but not used [-Wunused-function] static void exynos_dsi_disable_clock(struct exynos_dsi *dsi) ^ drm/exynos/exynos_drm_dsi.c:1291:13: warning: 'exynos_dsi_disable_irq' defined but not used [-Wunused-function] static void exynos_dsi_disable_irq(struct exynos_dsi *dsi) ^ This removes the #ifdef and instead marks the functions as __maybe_unused, so gcc can silently discard them and all called functions when CONFIG_PM is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-02-01drm/exynos: fix building without CONFIG_PM_SLEEPArnd Bergmann1-4/+2
The runtime PM operations use the suspend/resume functions even when CONFIG_PM_SLEEP is not set, but this now fails for the exynos DRM driver: exynos_mixer.c:1289:61: error: 'exynos_mixer_resume' undeclared here (not in a function) SET_RUNTIME_PM_OPS(exynos_mixer_suspend, exynos_mixer_resume, NULL) This removes the #ifdef and instead marks the functions as __maybe_unused, which does the right thing in all cases and also looks nicer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-31Linux 4.5-rc2Linus Torvalds1-1/+1
2016-01-30pid: Fix spelling in commentsZhen Lei1-1/+1
Accidentally discovered this typo when I studied this module. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tianhong Ding <dingtianhong@huawei.com> Cc: Xinwei Hu <huxinwei@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1454119457-11272-1-git-send-email-thunder.leizhen@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29Revert "btrfs: synchronize incompat feature bits with sysfs files"Chris Mason4-17/+0
This reverts commit 14e46e04958df740c6c6a94849f176159a333f13. This ends up doing sysfs operations from deep in balance (where we should be GFP_NOFS) and under heavy balance load, we're making races against sysfs internals. Revert it for now while we figure things out. Signed-off-by: Chris Mason <clm@fb.com>
2016-01-29serial: 8250_pci: Add Intel Broadwell portsMika Westerberg1-0/+29
Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as used on Intel Baytrail so we can reuse the existing Baytrail setup code. Add both Broadwell LPSS UART ports to the list of supported devices. Signed-off-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-29drm/amdgpu: no need to load MC firmware on fijiAlex Deucher1-4/+2
Vbios does this for us on asic_init. Reviewed-by: Ken Wang >Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-29x86/mm/pat: Avoid truncation when converting cpa->numpages to addressMatt Fleming1-2/+2
There are a couple of nasty truncation bugs lurking in the pageattr code that can be triggered when mapping EFI regions, e.g. when we pass a cpa->pgd pointer. Because cpa->numpages is a 32-bit value, shifting left by PAGE_SHIFT will truncate the resultant address to 32-bits. Viorel-Cătălin managed to trigger this bug on his Dell machine that provides a ~5GB EFI region which requires 1236992 pages to be mapped. When calling populate_pud() the end of the region gets calculated incorrectly in the following buggy expression, end = start + (cpa->numpages << PAGE_SHIFT); And only 188416 pages are mapped. Next, populate_pud() gets invoked for a second time because of the loop in __change_page_attr_set_clr(), only this time no pages get mapped because shifting the remaining number of pages (1048576) by PAGE_SHIFT is zero. At which point the loop in __change_page_attr_set_clr() spins forever because we fail to map progress. Hitting this bug depends very much on the virtual address we pick to map the large region at and how many pages we map on the initial run through the loop. This explains why this issue was only recently hit with the introduction of commit a5caa209ba9c ("x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down") It's interesting to note that safe uses of cpa->numpages do exist in the pageattr code. If instead of shifting ->numpages we multiply by PAGE_SIZE, no truncation occurs because PAGE_SIZE is a UL value, and so the result is unsigned long. To avoid surprises when users try to convert very large cpa->numpages values to addresses, change the data type from 'int' to 'unsigned long', thereby making it suitable for shifting by PAGE_SHIFT without any type casting. The alternative would be to make liberal use of casting, but that is far more likely to cause problems in the future when someone adds more code and fails to cast properly; this bug was difficult enough to track down in the first place. Reported-and-tested-by: Viorel-Cătălin Răpițeanu <rapiteanu.catalin@gmail.com> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=110131 Link: http://lkml.kernel.org/r/1454067370-10374-1-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-29ALSA: hda - disable dynamic clock gating on Broxton before resetLibin Yang1-0/+13
On Broxton, to make sure the reset controller works properly, MISCBDCGE bit (bit 6) in CGCTL (0x48) of PCI configuration space need be cleared before reset and set back to 1 after reset. Otherwise, it may prevent the CORB/RIRB logic from being reset. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-29iommu: Update struct iommu_ops commentsMagnus Damm1-4/+12
Update the comments around struct iommu_ops to match current state and fix a few typos while at it. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29iommu/vt-d: Fix link to Intel IOMMU SpecificationMichael S. Tsirkin1-1/+1
Looks like the VT-d spec at intel.com got moved. Update the link. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29iommu/amd: Correct the wrong setting of alias DTE in do_attachBaoquan He1-1/+1
In below commit alias DTE is set when its peripheral is setting DTE. However there's a code bug here to wrongly set the alias DTE, correct it in this patch. commit e25bfb56ea7f046b71414e02f80f620deb5c6362 Author: Joerg Roedel <jroedel@suse.de> Date: Tue Oct 20 17:33:38 2015 +0200 iommu/amd: Set alias DTE in do_attach/do_detach Signed-off-by: Baoquan He <bhe@redhat.com> Tested-by: Mark Hounschell <markh@compro.net> Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29iommu/vt-d: Don't skip PCI devices when disabling IOTLBJeremy McNicoll1-1/+1
Fix a simple typo when disabling IOTLB on PCI(e) devices. Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS") Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Jeremy McNicoll <jmcnicol@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29irqchip/mxs: Add missing set_handle_irq()Oleksij Rempel1-0/+1
The rework of the driver missed to move the call to set_handle_irq() into asm9260_of_init(). As a consequence no interrupt entry point is installed and no interrupts are delivered Solution is simple: Install the interrupt entry handler. Fixes: 7e4ac676ee ("irqchip/mxs: Add Alphascale ASM9260 support") Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: kernel@pengutronix.de Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1454061473-24957-1-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-29iommu/io-pgtable-arm: Fix io-pgtable-arm build failureLada Trimasova1-0/+1
Trying to build a kernel for ARC with both options CONFIG_COMPILE_TEST and CONFIG_IOMMU_IO_PGTABLE_LPAE enabled (e.g. as a result of "make allyesconfig") results in the following build failure: | CC drivers/iommu/io-pgtable-arm.o | linux/drivers/iommu/io-pgtable-arm.c: In | function ‘__arm_lpae_alloc_pages’: | linux/drivers/iommu/io-pgtable-arm.c:221:3: | error: implicit declaration of function ‘dma_map_single’ | [-Werror=implicit-function-declaration] | dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE); | ^ | linux/drivers/iommu/io-pgtable-arm.c:221:42: | error: ‘DMA_TO_DEVICE’ undeclared (first use in this function) | dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE); | ^ Since IOMMU_IO_PGTABLE_LPAE depends on DMA API, io-pgtable-arm.c should include linux/dma-mapping.h. This fixes the reported failure. Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Lada Trimasova <ltrimas@synopsys.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-29i2c: piix4: don't regress on bus namesJean Delvare1-5/+8
The I2C bus names are supposed to be stable as they can be used by userspace to uniquely identify a specific I2C bus. So restore the original names for all legacy (pre-SB800) devices. For SB800 devices and later, improve the names. "SDA" refers to the serial data pin of each SMBus port, it's an implementation detail the user doesn't need to know. Use "port" instead, which is easier to understand. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Christian Fetzer <fetzer.ch@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-29perf: Remove/simplify lockdep annotationPeter Zijlstra1-21/+1
Now that the perf_event_ctx_lock_nested() call has moved from put_event() into perf_event_release_kernel() the first reason is no longer valid as that can no longer happen. The second reason seems to have been invalidated when Al Viro made fput() unconditionally async in the following commit: 4a9d4b024a31 ("switch fput to task_work_add") such that munmap()->fput()->release()->perf_release() would no longer happen. Therefore, remove the annotation. This should increase the efficiency of lockdep coverage of perf locking. Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Synchronously clean up child eventsPeter Zijlstra2-93/+84
The orphan cleanup workqueue doesn't always catch orphans, for example, if they never schedule after they are orphaned. IOW, the event leak is still very real. It also wouldn't work for kernel counters. Doing it synchonously is a little hairy due to lock inversion issues, but is made to work. Patch based on work by Alexander Shishkin. Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Untangle 'owner' confusionPeter Zijlstra1-2/+12
There are two concepts of owner wrt an event and they are conflated: - event::owner / event::owner_list, used by prctl(.option = PR_TASK_PERF_EVENTS_{EN,DIS}ABLE). - the 'owner' of the event object, typically the file descriptor. Currently these two concepts are conflated, which gives trouble with scm_rights passing of file descriptors. Passing the event and then closing the creating task would render the event 'orphan' and would have it cleared out. Unlikely what is expectd. This patch untangles these two concepts by using PERF_EVENT_STATE_EXIT to denote the second type. Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Add flags argument to perf_remove_from_context()Peter Zijlstra1-11/+12
In preparation to adding more options, convert the boolean argument into a flags word. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Clean up sync_child_event()Peter Zijlstra1-42/+39
sync_child_event() has outgrown its purpose, it does far too much. Bring it back to its named purpose. Rename __perf_event_exit_task() to perf_event_exit_event() to better reflect what it does and move the event->state assignment under the ctx->lock, like state changes ought to be. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Robustify event->owner usage and SMP orderingPeter Zijlstra1-10/+10
Use smp_store_release() to clear event->owner and lockless_dereference() to observe it. Further use READ_ONCE() for all lockless reads. This changes perf_remove_from_owner() to leave event->owner cleared. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-29perf: Fix STATE_EXIT usagePeter Zijlstra1-2/+4
We should never attempt to enable a STATE_EXIT event. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>