| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If a stage-2 page-table contains an executable, read-only mapping at the
pte level (e.g. due to dirty logging being enabled), a subsequent write
fault to the same page which tries to install a larger block mapping
(e.g. due to dirty logging having been disabled) will erroneously inherit
the exec permission and consequently skip I-cache invalidation for the
rest of the block.
Ensure that exec permission is only inherited by write faults when the
new mapping is of the same size as the existing one. A subsequent
instruction abort will result in I-cache invalidation for the entire
block mapping.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Quentin Perret <qperret@google.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200723101714.15873-1-will@kernel.org
|
|
So far, vcpu_has_ptrauth() is implemented in terms of system_supports_*_auth()
calls, which are declared "inline". In some specific conditions (clang
and SCS), the "inline" very much turns into an "out of line", which
leads to a fireworks when this predicate is evaluated on a non-VHE
system (right at the beginning of __hyp_handle_ptrauth).
Instead, make sure vcpu_has_ptrauth gets expanded inline by directly
using the cpus_have_final_cap() helpers, which are __always_inline,
generate much better code, and are the only thing that make sense when
running at EL2 on a nVHE system.
Fixes: 29eb5a3c57f7 ("KVM: arm64: Handle PtrAuth traps early")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200722162231.3689767-1-maz@kernel.org
|
|
hdr.vmx.flags is meant for future extensions to the ABI, rejecting
invalid flags is necessary to avoid broken half-loads of the
nVMX state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A missing VMCS12 was not causing -EINVAL (it was just read with
copy_from_user, so it is not a security issue, but it is still
wrong). Test for VMCS12 validity and reject the nested state
if a VMCS12 is required but not present.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Setting KVM_STATE_NESTED_GUEST_MODE enables various consistency checks
on VMCS12 and therefore causes KVM_SET_NESTED_STATE to fail spuriously
with -EINVAL. Do not set the flag so that we're sure to cover the
conditions included by the test, and cover the case where VMCS12 is
set and KVM_SET_NESTED_STATE is called with invalid VMCS12 contents.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit dc6d95b153e78ed70b1b2c04a ("KVM: MIPS: Add more MMIO load/store
instructions emulation") introduced some 64bit load/store instructions
emulation which are unavailable on 32bit platform, and it causes build
errors:
arch/mips/kvm/emulate.c: In function 'kvm_mips_emulate_store':
arch/mips/kvm/emulate.c:1734:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 56) & 0xff);
^
arch/mips/kvm/emulate.c:1738:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 48) & 0xffff);
^
arch/mips/kvm/emulate.c:1742:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 40) & 0xffffff);
^
arch/mips/kvm/emulate.c:1746:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 32) & 0xffffffff);
^
arch/mips/kvm/emulate.c:1796:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 32);
^
arch/mips/kvm/emulate.c:1800:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 40);
^
arch/mips/kvm/emulate.c:1804:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 48);
^
arch/mips/kvm/emulate.c:1808:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 56);
^
cc1: all warnings being treated as errors
make[3]: *** [arch/mips/kvm/emulate.o] Error 1
So, use #if defined(CONFIG_64BIT) && defined(CONFIG_KVM_MIPS_VZ) to
guard the 64bit load/store instructions emulation.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: dc6d95b153e78ed70b1b2c04a ("KVM: MIPS: Add more MMIO load/store instructions emulation")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1594365797-536-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 850448f35aaf ("KVM: nVMX: Fix VMX preemption timer migration",
2020-06-01) accidentally broke nVMX live migration from older version
by changing the userspace ABI. Restore it and, while at it, ensure
that vmx->nested.has_preemption_timer_deadline is always initialized
according to the KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE flag.
Cc: Makarand Sonare <makarandsonare@google.com>
Fixes: 850448f35aaf ("KVM: nVMX: Fix VMX preemption timer migration")
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
HVC_SOFT_RESTART is given values for x0-2 that it should installed
before exiting to the new address so should not set x0 to stub HVC
success or failure code.
Fixes: af42f20480bf1 ("arm64: hyp-stub: Zero x0 on successful stub handling")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200706095259.1338221-1-ascull@google.com
|
|
Commit 07da1ffaa137 ("KVM: arm64: Remove host_cpu_context
member from vcpu structure") has, by removing the host CPU
context pointer, exposed that kvm_vcpu_pmu_restore_guest
is called in preemptible contexts:
[ 266.932442] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-aar/779
[ 266.939721] caller is debug_smp_processor_id+0x20/0x30
[ 266.944157] CPU: 2 PID: 779 Comm: qemu-system-aar Tainted: G E 5.8.0-rc3-00015-g8d4aa58b2fe3 #1374
[ 266.954268] Hardware name: amlogic w400/w400, BIOS 2020.04 05/22/2020
[ 266.960640] Call trace:
[ 266.963064] dump_backtrace+0x0/0x1e0
[ 266.966679] show_stack+0x20/0x30
[ 266.969959] dump_stack+0xe4/0x154
[ 266.973338] check_preemption_disabled+0xf8/0x108
[ 266.977978] debug_smp_processor_id+0x20/0x30
[ 266.982307] kvm_vcpu_pmu_restore_guest+0x2c/0x68
[ 266.986949] access_pmcr+0xf8/0x128
[ 266.990399] perform_access+0x8c/0x250
[ 266.994108] kvm_handle_sys_reg+0x10c/0x2f8
[ 266.998247] handle_exit+0x78/0x200
[ 267.001697] kvm_arch_vcpu_ioctl_run+0x2ac/0xab8
Note that the bug was always there, it is only the switch to
using percpu accessors that made it obvious.
The fix is to wrap these accesses in a preempt-disabled section,
so that we sample a coherent context on trap from the guest.
Fixes: 435e53fb5e21 ("arm64: KVM: Enable VHE support for :G/:H perf event modifiers")
Cc:: Andrew Murray <amurray@thegoodpenguin.co.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Use the "common" KVM_POSSIBLE_CR*_GUEST_BITS defines to initialize the
CR0/CR4 guest host masks instead of duplicating most of the CR4 mask and
open coding the CR0 mask. SVM doesn't utilize the masks, i.e. the masks
are effectively VMX specific even if they're not named as such. This
avoids duplicate code, better documents the guest owned CR0 bit, and
eliminates the need for a build-time assertion to keep VMX and x86
synchronized.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703040422.31536-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Mark CR4.TSD as being possibly owned by the guest as that is indeed the
case on VMX. Without TSD being tagged as possibly owned by the guest, a
targeted read of CR4 to get TSD could observe a stale value. This bug
is benign in the current code base as the sole consumer of TSD is the
emulator (for RDTSC) and the emulator always "reads" the entirety of CR4
when grabbing bits.
Add a build-time assertion in to ensure VMX doesn't hand over more CR4
bits without also updating x86.
Fixes: 52ce3c21aec3 ("x86,kvm,vmx: Don't trap writes to CR4.TSD")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703040422.31536-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Inject a #GP on MOV CR4 if CR4.LA57 is toggled in 64-bit mode, which is
illegal per Intel's SDM:
CR4.LA57
57-bit linear addresses (bit 12 of CR4) ... blah blah blah ...
This bit cannot be modified in IA-32e mode.
Note, the pseudocode for MOV CR doesn't call out the fault condition,
which is likely why the check was missed during initial development.
This is arguably an SDM bug and will hopefully be fixed in future
release of the SDM.
Fixes: fd8cb433734ee ("KVM: MMU: Expose the LA57 feature to VM.")
Cc: stable@vger.kernel.org
Reported-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703021714.5549-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Sparse complains on a call to get_compat_sigset, fix it. The "if"
right above explains that sigmask_arg->sigset is basically a
compat_sigset_t.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Bit 8 would be the "global" bit, which does not quite make sense for non-leaf
page table entries. Intel ignores it; AMD ignores it in PDEs and PDPEs, but
reserves it in PML4Es.
Probably, earlier versions of the AMD manual documented it as reserved in PDPEs
as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it.
Cc: stable@vger.kernel.org
Reported-by: Nadav Amit <namit@vmware.com>
Fixes: a0c0feb57992 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Syzbot reported that:
CPU: 1 PID: 6780 Comm: syz-executor153 Not tainted 5.7.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__apic_accept_irq+0x46/0xb80
Call Trace:
kvm_arch_async_page_present+0x7de/0x9e0
kvm_check_async_pf_completion+0x18d/0x400
kvm_arch_vcpu_ioctl_run+0x18bf/0x69f0
kvm_vcpu_ioctl+0x46a/0xe20
ksys_ioctl+0x11a/0x180
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0xf6/0x7d0
entry_SYSCALL_64_after_hwframe+0x49/0xb3
The testcase enables APF mechanism in MSR_KVM_ASYNC_PF_EN with ASYNC_PF_INT
enabled w/o setting MSR_KVM_ASYNC_PF_INT before, what's worse, interrupt
based APF 'page ready' event delivery depends on in kernel lapic, however,
we didn't bail out when lapic is not in kernel during guest setting
MSR_KVM_ASYNC_PF_EN which causes the null-ptr-deref in host later.
This patch fixes it.
Reported-by: syzbot+1bf777dfdde86d64b89b@syzkaller.appspotmail.com
Fixes: 2635b5c4a0 (KVM: x86: interrupt based APF 'page ready' event delivery)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1593426391-8231-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When making a vPE non-resident because it has hit a blocking WFI,
the doorbell can fire at any time after the write to the RD.
Crucially, it can fire right between the write to GICR_VPENDBASER
and the write to the pending_last field in the its_vpe structure.
This means that we would overwrite pending_last with stale data,
and potentially not wakeup until some unrelated event (such as
a timer interrupt) puts the vPE back on the CPU.
GICv4 isn't affected by this as we actively mask the doorbell on
entering the guest, while GICv4.1 automatically manages doorbell
delivery without any hypervisor-driven masking.
Use the vpe_lock to synchronize such update, which solves the
problem altogether.
Fixes: ae699ad348cdc ("irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Remove vcpu_vmx.host_pkru, which got left behind when PKRU support was
moved to common x86 code.
No functional change intended.
Fixes: 37486135d3a7b ("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200617034123.25647-1-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Linux TSC calibration procedure is subject to small variations
(its common to see +-1 kHz difference between reboots on a given CPU, for example).
So migrating a guest between two hosts with identical processor can fail, in case
of a small variation in calibrated TSC between them.
Without TSC scaling, the current kernel interface will either return an error
(if user_tsc_khz <= tsc_khz) or enable TSC catchup mode.
This change enables the following TSC tolerance check to
accept KVM_SET_TSC_KHZ within tsc_tolerance_ppm (which is 250ppm by default).
/*
* Compute the variation in TSC rate which is acceptable
* within the range of tolerance and decide if the
* rate being applied is within that bounds of the hardware
* rate. If so, no scaling or compensation need be done.
*/
thresh_lo = adjust_tsc_khz(tsc_khz, -tsc_tolerance_ppm);
thresh_hi = adjust_tsc_khz(tsc_khz, tsc_tolerance_ppm);
if (user_tsc_khz < thresh_lo || user_tsc_khz > thresh_hi) {
pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", user_tsc_khz, thresh_lo, thresh_hi);
use_scaling = 1;
}
NTP daemon in the guest can correct this difference (NTP can correct upto 500ppm).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20200616114741.GA298183@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Only MSR address range 0x800 through 0x8ff is architecturally reserved
and dedicated for accessing APIC registers in x2APIC mode.
Fixes: 0105d1a52640 ("KVM: x2apic interface to lapic")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove support for context switching between the guest's and host's
desired UMWAIT_CONTROL. Propagating the guest's value to hardware isn't
required for correct functionality, e.g. KVM intercepts reads and writes
to the MSR, and the latency effects of the settings controlled by the
MSR are not architecturally visible.
As a general rule, KVM should not allow the guest to control power
management settings unless explicitly enabled by userspace, e.g. see
KVM_CAP_X86_DISABLE_EXITS. E.g. Intel's SDM explicitly states that C0.2
can improve the performance of SMT siblings. A devious guest could
disable C0.2 so as to improve the performance of their workloads at the
detriment to workloads running in the host or on other VMs.
Wholesale removal of UMWAIT_CONTROL context switching also fixes a race
condition where updates from the host may cause KVM to enter the guest
with the incorrect value. Because updates are are propagated to all
CPUs via IPI (SMP function callback), the value in hardware may be
stale with respect to the cached value and KVM could enter the guest
with the wrong value in hardware. As above, the guest can't observe the
bad value, but it's a weird and confusing wart in the implementation.
Removal also fixes the unnecessary usage of VMX's atomic load/store MSR
lists. Using the lists is only necessary for MSRs that are required for
correct functionality immediately upon VM-Enter/VM-Exit, e.g. EFER on
old hardware, or for MSRs that need to-the-uop precision, e.g. perf
related MSRs. For UMWAIT_CONTROL, the effects are only visible in the
kernel via TPAUSE/delay(), and KVM doesn't do any form of delay in
vcpu_vmx_run(). Using the atomic lists is undesirable as they are more
expensive than direct RDMSR/WRMSR.
Furthermore, even if giving the guest control of the MSR is legitimate,
e.g. in pass-through scenarios, it's not clear that the benefits would
outweigh the overhead. E.g. saving and restoring an MSR across a VMX
roundtrip costs ~250 cycles, and if the guest diverged from the host
that cost would be paid on every run of the guest. In other words, if
there is a legitimate use case then it should be enabled by a new
per-VM capability.
Note, KVM still needs to emulate MSR_IA32_UMWAIT_CONTROL so that it can
correctly expose other WAITPKG features to the guest, e.g. TPAUSE,
UMWAIT and UMONITOR.
Fixes: 6e3ba4abcea56 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623005135.10414-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all
intents and purposes is vmx_write_pml_buffer(), instead of having the
latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit
update is the result of KVM emulation (rare for L2), then the GPA in the
VMCS may be stale and/or hold a completely unrelated GPA.
Fixes: c5f983f6e8455 ("nVMX: Implement emulated Page Modification Logging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
translate_gpa() returns a GPA, assigning it to 'real_gfn' seems obviously
wrong. There is no real issue because both 'gpa_t' and 'gfn_t' are u64 and
we don't use the value in 'real_gfn' as a GFN, we do
real_gfn = gpa_to_gfn(real_gfn);
instead. 'If you see a "buffalo" sign on an elephant's cage, do not trust
your eyes', but let's fix it for good.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200622151435.752560-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The following race can cause lost map update events:
cpu1 cpu2
apic_map_dirty = true
------------------------------------------------------------
kvm_recalculate_apic_map:
pass check
mutex_lock(&kvm->arch.apic_map_lock);
if (!kvm->arch.apic_map_dirty)
and in process of updating map
-------------------------------------------------------------
other calls to
apic_map_dirty = true might be too late for affected cpu
-------------------------------------------------------------
apic_map_dirty = false
-------------------------------------------------------------
kvm_recalculate_apic_map:
bail out on
if (!kvm->arch.apic_map_dirty)
To fix it, record the beginning of an update of the APIC map in
apic_map_dirty. If another APIC map change switches apic_map_dirty
back to DIRTY during the update, kvm_recalculate_apic_map should not
make it CLEAN, and the other caller will go through the slow path.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Guest fails to online hotplugged CPU with error
smpboot: do_boot_cpu failed(-1) to wakeup CPU#4
It's caused by the fact that kvm_apic_set_state(), which used to call
recalculate_apic_map() unconditionally and pulled hotplugged CPU into
apic map, is updating map conditionally on state changes. In this case
the APIC map is not considered dirty and the is not updated.
Fix the issue by forcing unconditional update from kvm_apic_set_state(),
like it used to be.
Fixes: 4abaffce4d25a ("KVM: LAPIC: Recalculate apic map in batch")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622160830.426022-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ensure we're actually accounting run_delay before we claim that we'll
expose it to the guest. If we're not, then we just pretend like steal
time isn't supported in order to avoid any confusion.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200622142710.18677-1-drjones@redhat.com
|
|
If SVE is enabled then 'ret' can be assigned the return value of
kvm_vcpu_enable_sve() which may be 0 causing future "goto out" sites to
erroneously return 0 on failure rather than -EINVAL as expected.
Remove the initialisation of 'ret' and make setting the return value
explicit to avoid this situation in the future.
Fixes: 9a3cdf26e336 ("KVM: arm64/sve: Allow userspace to enable SVE for vcpus")
Cc: stable@vger.kernel.org
Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200617105456.28245-1-steven.price@arm.com
|
|
The "inline" keyword is a hint for the compiler to inline a function. The
functions system_uses_irq_prio_masking() and gic_write_pmr() are used by
the code running at EL2 on a non-VHE system, so mark them as
__always_inline to make sure they'll always be part of the .hyp.text
section.
This fixes the following splat when trying to run a VM:
[ 47.625273] Kernel panic - not syncing: HYP panic:
[ 47.625273] PS:a00003c9 PC:0000ca0b42049fc4 ESR:86000006
[ 47.625273] FAR:0000ca0b42049fc4 HPFAR:0000000010001000 PAR:0000000000000000
[ 47.625273] VCPU:0000000000000000
[ 47.647261] CPU: 1 PID: 217 Comm: kvm-vcpu-0 Not tainted 5.8.0-rc1-ARCH+ #61
[ 47.654508] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[ 47.661139] Call trace:
[ 47.663659] dump_backtrace+0x0/0x1cc
[ 47.667413] show_stack+0x18/0x24
[ 47.670822] dump_stack+0xb8/0x108
[ 47.674312] panic+0x124/0x2f4
[ 47.677446] panic+0x0/0x2f4
[ 47.680407] SMP: stopping secondary CPUs
[ 47.684439] Kernel Offset: disabled
[ 47.688018] CPU features: 0x240402,20002008
[ 47.692318] Memory Limit: none
[ 47.695465] ---[ end Kernel panic - not syncing: HYP panic:
[ 47.695465] PS:a00003c9 PC:0000ca0b42049fc4 ESR:86000006
[ 47.695465] FAR:0000ca0b42049fc4 HPFAR:0000000010001000 PAR:0000000000000000
[ 47.695465] VCPU:0000000000000000 ]---
The instruction abort was caused by the code running at EL2 trying to fetch
an instruction which wasn't mapped in the EL2 translation tables. Using
objdump showed the two functions as separate symbols in the .text section.
Fixes: 85738e05dc38 ("arm64: kvm: Unmask PMR before entering guest")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200618171254.1596055-1-alexandru.elisei@arm.com
|
|
Guest crashes are observed on a Cascade Lake system when 'perf top' is
launched on the host, e.g.
BUG: unable to handle kernel paging request at fffffe0000073038
PGD 7ffa7067 P4D 7ffa7067 PUD 7ffa6067 PMD 7ffa5067 PTE ffffffffff120
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 1 Comm: systemd Not tainted 4.18.0+ #380
...
Call Trace:
serial8250_console_write+0xfe/0x1f0
call_console_drivers.constprop.0+0x9d/0x120
console_unlock+0x1ea/0x460
Call traces are different but the crash is imminent. The problem was
blindly bisected to the commit 041bc42ce2d0 ("KVM: VMX: Micro-optimize
vmexit time when not exposing PMU"). It was also confirmed that the
issue goes away if PMU is exposed to the guest.
With some instrumentation of the guest we can see what is being switched
(when we do atomic_switch_perf_msrs()):
vmx_vcpu_run: switching 2 msrs
vmx_vcpu_run: switching MSR38f guest: 70000000d host: 70000000f
vmx_vcpu_run: switching MSR3f1 guest: 0 host: 2
The current guess is that PEBS (MSR_IA32_PEBS_ENABLE, 0x3f1) is to blame.
Regardless of whether PMU is exposed to the guest or not, PEBS needs to
be disabled upon switch.
This reverts commit 041bc42ce2d0efac3b85bbb81dea8c74b81f4ef9.
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200619094046.654019-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The current number of KVM_IRQCHIP_NUM_PINS results in an order 3
allocation (32kb) for each guest start/restart. This can result in OOM
killer activity even with free swap when the memory is fragmented
enough:
kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0
kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu
kernel: Hardware name: IBM 8562 T02 Z06 (LPAR)
kernel: Call Trace:
kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0)
kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0
kernel: [<00000001f8687032>] dump_header+0x62/0x258
kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180
kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580
kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90
kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320
kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0
kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0
kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0
kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0
kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760
kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690
kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0
kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40
kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8
As far as I can tell s390x does not use the iopins as we bail our for
anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is
only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to
reduce the memory footprint.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com
|
|
Add is_intr_type() and is_intr_type_n() to consolidate the boilerplate
code for querying a specific type of interrupt given an encoded value
from VMCS.VM_{ENTER,EXIT}_INTR_INFO, with and without an associated
vector respectively.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200609014518.26756-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For some reasons, running a simple qemu-kvm command with KCSAN will
reset AMD hosts. It turns out svm_vcpu_run() could not be instrumented.
Disable it for now.
# /usr/libexec/qemu-kvm -name ubuntu-18.04-server-cloudimg -cpu host
-smp 2 -m 2G -hda ubuntu-18.04-server-cloudimg.qcow2
=== console output ===
Kernel 5.6.0-next-20200408+ on an x86_64
hp-dl385g10-05 login:
<...host reset...>
HPE ProLiant System BIOS A40 v1.20 (03/09/2018)
(C) Copyright 1982-2018 Hewlett Packard Enterprise Development LP
Early system initialization, please wait...
Signed-off-by: Qian Cai <cai@lca.pw>
Message-Id: <20200415153709.1559-1-cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
During the KVM merging progress, a CONFIG_CPU_LOONGSON64 guard in commit
7f2a83f1c2a941ebfee53 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3")
is missing by accident. So add it to avoid building error.
Fixes: 7f2a83f1c2a941ebfee53 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1592204215-28704-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
|
The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
|
|
This reverts commit a43a67a2d715540c1368b9501a22b0373b5874c0.
This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.
The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.
Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.
There have been discussions how to fix that, but revert seems to be the
least intrusive option.
Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.
This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").
Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().
Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Will Deacon
Marc Zyngier
Paolo Bonzini
Huacai Chen
Andrew Scull
Sean Christopherson
Wanpeng Li
Marcelo Tosatti
Xiaoyao Li
Vitaly Kuznetsov
Igor Mammedov
Andrew Jones
Steven Price
Alexandru Elisei
Christian Borntraeger
Qian Cai
Linus Torvalds
Thomas Cedeno
David Sterba
Grygorii Strashko
Liao Pingfang