aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-02-24drm/atomic-helpers: make mode_set hooks optionalDaniel Vetter2-3/+5
With runtime PM the hw might still be off while doing the ->mode_set callbacks - runtime PM get/put should only happen in the enable/disable hooks to properly support DPMS. Which essentially makes these callbacks useless for drivers support runtime PM, so make them optional. Again motivated by discussions with Laurent. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-24drm/atomic-helper: Rename commmit_post/pre_planesDaniel Vetter5-24/+34
These names only make sense because of backwards compatability with the order used by the crtc helper library. There's not really any real requirement in the ordering here. So rename them to something more descriptive and update the kerneldoc a bit. Motivated in a discussion with Laurent about how to restore plane state for dpms for drivers with runtime pm. v2: Squash in fixup from Stephen Rothwell to fix a conflict with tegra. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-23drm/atomic: Rename drm_atomic_helper_commit_pre_planes() state argumentLaurent Pinchart1-5/+5
The argument contains a pointer to the old state, rename it to old_state like in all other commit helper functions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23drm: If available use atomic state in getcrtc ioctlDaniel Vetter1-7/+18
This way drivers fully converted to atomic don't need to update these legacy state variables in their modeset code any more. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-23drm: Add DRM_DEBUG_ATOMICDaniel Vetter3-111/+122
Atomic state handling adds a lot of indirection and complexity between simple updates and drivers. For easier debugging the diagnostic output is therefore rather chatty. Which is great for tracking down atomic issues, but really annoying otherwise. Add a new DRM_DEBUG_ATOMIC to be able to filter this out. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-23drm/atomic-helpers: Fix documentation typos and wrong copy&pasteLaurent Pinchart1-6/+9
The kerneldoc blocks for the drm_atomic_helper_*_set_property() functions seem to have been copied from the plane disable handler without being properly updated. Fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23drm: Fix the CRTC_STEREO_DOUBLE_ONLY define to include stero modesDamien Lespiau1-1/+1
The CRTC_STEREO_DOUBLE_ONLY define was introduced in commit: commit ecb7e16bf187bc369cf6a5cd108582c01329980d Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Date: Mon Dec 1 15:40:09 2014 -0800 drm: add helper to get crtc timings (v5) but if we want the stereo h/v adjustments, we need to set the CRTC_STEREO_DOUBLE flag. Otherwise, we'll get the wrong h/v for frame packing stereo 3d modes. Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23drm: Fix drm_crtc_vblank_get() documentationDamien Lespiau1-1/+1
drm_crtc_vblank_get() is the new drm_vblank_get(), not the new drm_vblank_off(). Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-11drm/radeon: only enable kv/kb dpm interrupts once v3Alex Deucher2-23/+15
Enable at init and disable on fini. Workaround for hardware problems. v2 (chk): extend commit message v3: add new function Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> (v2) Cc: stable@vger.kernel.org
2015-02-11drm/radeon: workaround for CP HW bug on CIKChristian König1-1/+15
Emit the EOP twice to avoid cache flushing problems. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-11drm/radeon: Don't try to enable write-combining without PATMichel Dänzer1-0/+12
Doing so can cause things to become slow. Print a warning at compile time and an informative message at runtime in that case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88758 Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-11drm/radeon: use 0-255 rather than 0-100 for pwm fan rangeAlex Deucher1-2/+6
0-255 seems to be the preferred range for the pwm interface. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-11drm/i915: Clamp efficient frequency to valid rangeTom O'Rourke1-1/+4
The efficient frequency (RPe) should stay in the range RPn <= RPe <= RP0. The pcode clamps the returned value internally on Broadwell but not on Haswell. Fix for missing range check in commit 93ee29203f506582cca2bcec5f05041526d9ab0a Author: Tom O'Rourke <Tom.O'Rourke@intel.com> Date: Wed Nov 19 14:21:52 2014 -0800 drm/i915: Use efficient frequency for HSW/BDW Reference: http://lists.freedesktop.org/archives/intel-gfx/2015-February/059802.html Reported-by: Michael Auchter <a@phire.org> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org # v3.19 Signed-off-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-11drm/i915: Really ignore long HPD pulses on eDPVille Syrjälä1-1/+1
Return IRQ_HANDLED from intel_dp_hpd_pulse() to properly ignore the long HPD pulse on eDP to avoid the never ending VDD off->HPD->VDD on->VDD off->HPD... cycle. This fixes a regression intoduced by commit b2c5c181ed18490648a02f8c7d562a3b9e8b96de Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jan 23 06:00:31 2015 +0100 drm/i915: Use symbolic irqreturn for ->hpd_pulse Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRLShobhit Kumar1-3/+2
LP_OUTPUT_HOLD is only in MIPI_PORT_CTRL(PORT_A) even for PORT_C in case of dual link. In the dual link implementation, the bit is correctly set or unset for hardcoded PORT_A, but for bit update the register base value is read by using MIPI_PORT_CTRL(port) in a loop. The second iteration will read base value from PORT_C and program for PORT_A. Mostly in case of dual link all other bit values should be same, but logically we should read from PORT_A. So hardcode to read initial value from PORT_A as well. Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09drm/i915: Insert a command barrier on BLT/BSD cache flushesChris Wilson2-13/+30
This looked like an odd regression from commit ec5cc0f9b019af95e4571a9fa162d94294c8d90b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Jun 12 10:28:55 2014 +0100 drm/i915: Restrict GPU boost to the RCS engine but in reality it undercovered a much older coherency bug. The issue that boosting the GPU frequency on the BCS ring was masking was that we could wake the CPU up after completion of a BCS batch and inspect memory prior to the write cache being fully evicted. In order to serialise the breadcrumb interrupt (and so ensure that the CPU's view of memory is coherent) we need to perform a post-sync operation in the MI_FLUSH_DW. v2: Fix all the MI_FLUSH_DW (bsd plus the duplication in execlists). Also fix the invalidate_domains mask in gen8_emit_flush() for ring != VCS. Testcase: gpuX-rcs-gpu-read-after-write Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09drm/i915: Drop vblank wait from intel_dp_link_downDaniel Vetter1-16/+1
Nothing in Bspec seems to indicate that we actually needs this, and it looks like can't work since by this point the pipe is off and so vblanks won't really happen any more. Note that Bspec mentions that it takes a vblank for this bit to change, but _only_ when enabling. Dropping this code quenches an annoying backtrace introduced by the more anal checking since commit 51e31d49c89055299e34b8f44d13f70e19aaaad1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Sep 15 12:36:02 2014 +0200 drm/i915: Use generic vblank wait Note: This fixes the fallout from the above commit, but does not address the shortcomings of the IBX transcoder select workaround implementation discussed during review [1]. [1] http://mid.gmane.org/87y4o7usxf.fsf@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86095 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: stable@vger.kernel.org # 3.19 Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09drm/i915: Squelch overzealous uncore reset WARN_ONMika Kuoppala1-1/+8
We added this WARN_ON to guard against using uninitialized forcewake domains. But forgot blissfully that not all gens have forcewake domains in the first place. v2: Move WARN_ON to fw_domains_init (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88911 Tested-by: Ding Heng <hengx.ding@intel.com> (v1) Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [Jani: add comment above WARN_ON as suggested by Chris] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09drm/i915: Take runtime pm reference on hangcheck_infoMika Kuoppala1-5/+17
We read the coherent current seqno and actual head from ring. For hardware access we need to take runtime_pm reference. Get hardware specific values with runtime reference held and print them first to emphasize hw state vs bookkeepping. v2: Reorder output according to hw access (Chris) remove superfluous locking (Daniel) Testcase: igt/pm_rpm/debugfs-read Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88910 Tested-by: Ding Heng <hengx.ding@intel.com> (v1) Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09drm/i915: Correct the IOSF Dev_FN field for IOSF transfersShobhit Kumar1-13/+13
As per the specififcation, the SB_DevFn is the PCI_DEVFN of the target device and not the source. So PCI_DEVFN(2,0) is not correct. Further the port ID should be enough to identify devices unless they are MFD. The SB_DevFn was intended to remove ambiguity in case of these MFD devices. For non MFD devices the recommendation for the target device IP was to ignore these fields, but not all of them followed the recommendation. Some like CCK ignore these fields and hence PCI_DEVFN(2, 0) works and so does PCI_DEVFN(0, 0) as it works for DPIO. The issue came to light because of GPIONC which was not getting programmed correctly with PCI_DEVFN(2, 0). It turned out that this did not follow the recommendation and expected 0 in this field. In general the recommendation is to use SB_DevFn as PCI_DEVFN(0, 0) for all devices except target PCI devices. Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-05drm: sti: HDMI add audio infoframeArnaud Pouliquen1-42/+137
Add a default audio infoframe for HDMI compliance Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
2015-02-05drm/i915: Prevent use-after-free in invalidate_range_start callbackMichał Winiarski1-2/+18
It's possible for invalidate_range_start mmu notifier callback to race against userptr object release. If the gem object was released prior to obtaining the spinlock in invalidate_range_start we're hitting null pointer dereference. Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close-overlap Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org [Jani: added code comment suggested by Chris] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-05drm: sti: add support of XBGR8888 for gdp planeFabien Dessenne1-0/+4
Use GDP capabilities to support DRM_FORMAT_XBGR8888 (XB24) Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2015-02-04drm: sti: add support of ABGR8888 for gdp planeBenjamin Gaignard1-0/+7
Use GDP capabilities to support DRM_FORMAT_ABGR8888 (AB24) Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2015-02-04drm: sti: fix static checker warning in sti_awg_utilsVincent Abriou1-2/+0
The shift and the mask done on arg value is useless since arg is null. Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
2015-02-04drm: sti: fix check for clk_pix_mainJassi Brar1-1/+1
copy-paste wasn't followed by editing, do it. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-02-04drm: Use static attribute groups for managing connector sysfs entriesTakashi Iwai1-65/+67
Instead of manual calls of device_create_file() and device_remove_file(), assign the static attribute groups to the device with device_create_with_groups(). The conditionally built sysfs entries are handled via is_visible callback. This simplifies the code and also avoids the possible races. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-04drm: remove DRM_FORMAT_NV12MTDaniel Vetter5-24/+2
So this has been merged originally in commit 83052d4d5cd518332440bb4ee63d68bb5f744e0f Author: Seung-Woo Kim <sw0312.kim@samsung.com> Date: Thu Dec 15 15:40:55 2011 +0900 drm: Add multi buffer plane pixel formats which hasn't seen a lot of review really. The problem is that it's not a real pixel format, but just a different way to lay out NV12 pixels in macroblocks, i.e. a tiling format. The new way of doing this is with the soon-to-be-merged fb modifiers. This was brough up in some long irc discussion around the entire topic, as an example of where things have gone wrong. Luckily we can correct the mistake: - The kms side support for NV12MT is all dead code because format_check in drm_crtc.c never accepted NV12MT. - The gem side for the gsc support doesn't look better: The code forgets to set the pixel format and makes a big mess with the tiling mode bits, inadvertedly setting them all. Conclusion: This never really worked (at least not in upstream) and hence we can safely correct our mistake here. Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Rob Clark <robclark@freedesktop.org> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Rob Clark <robclark@freedesktop.org> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-03drm/i915: Remove bogus locking check in the hangcheck codeDaniel Vetter1-3/+0
You can _never_ assert that a lock is not held, except in some very restricted corner cases where it's guranteed that your code is running single-threade (e.g. driver load before you've published any pointers leading to that lock). In addition the early return breaks a bunch of testcases since with highly concurrent hangcheck stress tests the reset fails to work and the test doesn't recover and time out. This regression has been introduced in commit b8d24a06568368076ebd5a858a011699a97bfa42 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Jan 28 17:03:14 2015 +0200 drm/i915: Remove nested work in gpu error handling Aside: It is possible to check whether a given task doesn't hold a lock, but only when lockdep is enabled, using the lockdep_assert_held stuff. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88908 Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-03drm/modes: Print the mode status in human readable formVille Syrjälä1-2/+59
Currently when a mode is rejected the reason is printed as a raw number. Having to manually decode that to a enum drm_mode_status value is tiresome. Have the code do the decoding instead and print the result in a human readable format. Just having an array of strings indexed with the mode status doesn't work since the enum includes negative values. So we offset the status by +3 which makes all the indexes non-negative. Also add a bit of paranoia into the code to catch out of bounds accesses in case someone adds more enum values but forgets to update the code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-03drm/modes: Print the mode status in human readable formVille Syrjälä1-2/+59
Currently when a mode is rejected the reason is printed as a raw number. Having to manually decode that to a enum drm_mode_status value is tiresome. Have the code do the decoding instead and print the result in a human readable format. Just having an array of strings indexed with the mode status doesn't work since the enum includes negative values. So we offset the status by +3 which makes all the indexes non-negative. Also add a bit of paranoia into the code to catch out of bounds accesses in case someone adds more enum values but forgets to update the code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-02-03drm: Kconfig: Let all DRM_GEM_CMA_HELPER related macros depend on HAVE_DMA_ATTRSChen Gang S6-6/+7
DRM_GEM_CMA_HELPER is depend on HAVE_DMA_ATTRS, or it will break the building. The related error (with allmodconfig under xtensa): CC [M] drivers/gpu/drm/drm_gem_cma_helper.o drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_create': drivers/gpu/drm/drm_gem_cma_helper.c:110:19: error: implicit declaration of function 'dma_alloc_writecombine' [-Werror=implicit-function-declaration] cma_obj->vaddr = dma_alloc_writecombine(drm->dev, size, ^ drivers/gpu/drm/drm_gem_cma_helper.c:110:17: warning: assignment makes pointer from integer without a cast [-Wint-conversion] cma_obj->vaddr = dma_alloc_writecombine(drm->dev, size, ^ drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_free_object': drivers/gpu/drm/drm_gem_cma_helper.c:193:3: error: implicit declaration of function 'dma_free_writecombine' [-Werror=implicit-function-declaration] dma_free_writecombine(gem_obj->dev->dev, cma_obj->base.size, ^ drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_mmap_obj': drivers/gpu/drm/drm_gem_cma_helper.c:330:8: error: implicit declaration of function 'dma_mmap_writecombine' [-Werror=implicit-function-declaration] ret = dma_mmap_writecombine(cma_obj->base.dev->dev, vma, ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-02-01drm/msm: add moduleparam to disable fbdevRob Clark1-1/+8
Useful to avoid recompiling to disable fbdev. Useful because otherwise the first modeset happens under console_lock (ie. debugging sadness). Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm: fix build error with W=1Rob Clark1-3/+0
Combining -Werror with all the extra warning flags that W=1 adds doesn't go so well. Especially because some of the warnings triggered are from included headers. So just drop -Werror. Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/mdp5: Fix negative SMP block allocationStephane Viau1-2/+3
In case we request a number of SMP blocks which is lower than the already reserved blocks, we should not try to allocate a negative number, but 0 blocks instead. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/hdmi: disallow interlacedRob Clark1-1/+1
So after clarification from qcom, it seems mdp4 and mdp5 support *de*interlacing but not generating an interlaced signal. Which would explain why interlaced modes never worked properly. So disable in the one connector which was claiming to support interlaced. Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/atomic: fix issue with gnome-shell waylandRob Clark1-1/+4
The gnome-shell wayland compositor triggers a setcrtc with an fb that is still being rendered, triggering the call to _wait_fence_interruptable(). But a NULL timeout means "don't wait, return -EBUSY if not ready", which in turn causes the setcrtc to fail. Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/mdp5: Add hardware cursor supportBeeresh Gopal1-0/+164
This patch implements the hardware accelarated cursor support for MDP5 platforms. Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: Wentao Xu <wentaox@codeaurora.org> Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/hdmi: rework hdmi configurations, using dt_match[]Stephane Viau2-59/+72
In the same idea mdp5_cfg was added, this change allows us to quickly add new instances, such as apq8084's HDMI in this case. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/hdmi: Add HDMI platform config for apq8084Stephane Viau2-0/+18
This change add the regulator/clock configuration for MDP5 v1.3. This config is close to the one already existing for 8x74, except that one more regulator is needed (hpd-5v-en). Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/hdmi: use dynamic allocation for hdmi resourcesStephane Viau2-8/+28
Instead of reporting BUG_ON when resources arrays are not dimensioned correctly, this patch does a dynamic allocation of these arrays. This is needed for the following patches that add a regulator for a new target. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/mdp5: fix parameter type for mdp5_ctl_set_intf()Stephane Viau2-2/+2
mdp5_ctl_set_intf()'s second argument should be "int", not "enum mdp5_intf". The passed in value is "intf", not "intf_id". Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/dp: use link power helpersRob Clark1-19/+2
Now that we have a helper for drm_dp_link_power_down(), use dp helpers instead of rolling our own. Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm: Add the eDP connector in msm drm driver (V2)Hai Li4-13/+75
Modified the hard-coded hdmi connector/encoder implementations in msm drm driver to support both edp and hdmi. V1: Initial change V2: Address Thierry's change Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm: Initial add eDP support in msm drm driver (v5)Hai Li9-0/+2350
This change adds a new eDP connector in msm drm driver. With this change, eDP panel can work with msm platform under drm framework. v1: Initial change v2: Address Rob's comments Use generated header file for register definitions Change to devm_* APIs v3: Address Thierry's comments and rebase on top of atomic changes Remove edp_bridge_mode_fixup Remove backlight control code and rely on pwm-backlight Remove continuous splash screen support for now Change to gpiod_* APIs v4: Fix kbuild test issue Signed-off-by: Hai Li <hali@codeaurora.org> [robclark: v5: rebase on drm_bridge changes in drm-next] Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/mdp4: add YUV format supportBeeresh Gopal1-9/+95
The patch add support for YUV frame format for MDP4 platform. Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/mdp5: add NV12 support for MDP5Stephane Viau2-21/+194
This change adds the NV12 format support for public planes. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm/mdp: add common YUV information for MDP4/MDP5Stephane Viau7-22/+154
Both MDP4 and MDP5 share some code as far as YUV support is concerned. This change adds this information and will be followed by the actual MDP4 and MDP5 YUV support patches. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm: update generated headersRob Clark14-325/+1166
Resync from rnndb database, to pull in register defines for: * eDP * HDMI/HDCP * mdp4/mdp5 YUV support * mdp5 hw cursor support Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-01drm/msm: Do not BUG_ON(!spin_is_locked()) on UPBruno Prémont1-1/+1
On !SMP systems spinlocks do not exist. Thus checking of they are active will always fail. Use assert_spin_locked(lock); instead of BUG_ON(!spin_is_locked(lock)); to not BUG() on all UP systems. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> [robclark: drop stray ')'] Signed-off-by: Rob Clark <robdclark@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.