| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Implemented separate stream_tag assignment for input and output streams.
According to hda specification stream tag must be unique throughout the
input streams group, however an output stream might use a stream tag
which is already in use by an input stream. This change is necessary
to support HW which provides a total of more than 15 stream DMA engines
which with legacy implementation causes an overflow on SDxCTL.STRM
field (and the whole SDxCTL register) and as a result usage of
Reserved value 0 in the SDxCTL.STRM field which confuses HDA controller.
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: Jayachandran B <jayachandran.b@intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Since RK3288 DMAC's burst length only support max to 4, here
set maxburst of playback and capture dma data to 4.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to description about "Transmit Data Level",
This bit field controls the level at which a DMA request
is made by the transmit logic.
It is equal to the watermark level.
That is, the dma_tx_req signal is generated when the number
of valid data entries in the TXFIFO
(TXFIFO0 if CSR=00
TXFIFO1 if CSR=01
TXFIFO2 if CSR=10
TXFIFO3 if CSR=11)
is equal to or below this field value.
Different to receive data level, transmit data level does not need
to "-1".
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For block span more than 1 section, when allocate it from
a free block, we need allocate the remain buffers within
the block, and then continue alloc the rest of needed
size buffer.
Here also make sure this free block is moved from free
list to used list, and add it to block_list which may
be used for power gating disabling later.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_kcontrol_chip should return snd_soc_component instead of
snd_soc_codec
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_sst_bytcr_dpcm_rt5640 doesn't autoload because MODULE_ALIAS doesn't
match with "bytt100_rt5640" platform device.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
BYTCR DSP firmware is in intel/ subdirectory. See linux-firmware.git
commit d562a3b63632 ("linux-firmware: add sst audio firmware for baytrail
platforms").
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Designware core can be configured with up to four stereo channels.
Each stereo channel is individually configured so, when the driver's
hw_params call is made, each requested stereo channel has to be
programmed.
Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Flush the FIFOs when the stream is prepared for use. This avoids
an inadvertent swapping of the left/right channels if the FIFOs are
not empty at startup.
Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
Fix following build error when CONFIG_I2C is not enabled:
sound/soc/codecs/rt5640.c:2252:1: warning: data definition has no type or storage class
module_i2c_driver(rt5640_i2c_driver);
^
sound/soc/codecs/rt5640.c:2252:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int]
sound/soc/codecs/rt5640.c:2252:1: warning: parameter names (without types) in function declaration
sound/soc/codecs/rt5640.c:2241:26: warning: ‘rt5640_i2c_driver’ defined but not used [-Wunused-variable]
static struct i2c_driver rt5640_i2c_driver = {
^
cc1: some warnings being treated as errors
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
There are no users of this symbol left.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Move pinmux alloc/dealloc code into functions that don't take
the spinlock so we can use from code that has the spinlock already.
CRISv32 has no working SMP, so spinlocks becomes a NOP,
so deadlock was never seen.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Fixes compile error on allmodconfig.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Also, print kernel version on oops.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Drop i2c_init from this header, it was declared non-static here,
but static in the C-file.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Make driver possible to load as a module and try to handle
locking better.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
- Add free_initrd_mem as found by Guenter Roeck <linux@roeck-us.net>
- Add free_init_pages
- Export empty_zero_page symbol
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Don't enter watchdog handling if we're already in watchdog handling.
Also some minor formatting tweaks.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
strcmp was lost when all other string functions were removed,
but we still have an optimized version for this on CRISv32,
so any driver built as a module would not have access to this symbol.
In a similar manner, we had optimized versions of
csum_partial_copy_from_user and __do_clear_user
but no exported symbols for them, breaking bunch of other drivers
when built as a module.
At the same time, move EXPORT_SYMBOL(__copy_user) and
EXPORT_SYMBOL(__copy_user_zeroing) C-files so it's
located together with the function definition.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Fix headers_install by adjusting the path to arch files.
And delete unused Kbuild file.
Drop special handling of cris in the headers.sh script
as a nice side-effect.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Fixes the following compile error.
arch/cris/arch-v32/kernel/time.c: In function 'reset_watchdog':
arch/cris/arch-v32/kernel/time.c:121:2:
error: implicit declaration of function 'global_page_state'
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
File was already deleted.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
|
|
I'm leaving Red Hat at the end of December 2014, so remove all
references to my soon-to-be-dead address.
(There are some references left in the tree, that need additional
changes, I'll send those through the AGP maintainers).
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The new driver is around for more than 2 years now, so the old one can
go. Getting rid of it helps the removal of the legacy .attach_adapter
callback of the I2C subsystem.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The 8250_omap serial driver is a new user of CONFIG_PM_RUNTIME.
However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so
#ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to
depend on CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM in 8250_omap.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sst-haswell-pcm driver is a new user of CONFIG_PM_RUNTIME.
However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so
#ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to
depend on CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM in
sound/soc/intel/sst-haswell-pcm.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
|
|
A couple of new CONFIG_PM_RUNTIME users have been added recently
in the SPI subsystem.
However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so
#ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to
depend on CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/spi/ (again).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
|
|
commit 4dbd27711cd9 "tick: export nohz tick idle symbols for module
use" was merged via the thermal tree without an explicit ack from the
relevant maintainers.
The exports are abused by the intel powerclamp driver which implements
a fake idle state from a sched FIFO task. This causes all kinds of
wreckage in the NOHZ core code which rightfully assumes that
tick_nohz_idle_enter/exit() are only called from the idle task itself.
Recent changes in the NOHZ core lead to a failure of the powerclamp
driver and now people try to hack completely broken and backwards
workarounds into the NOHZ core code. This is completely unacceptable
and just papers over the real problem. There are way more subtle
issues lurking around the corner.
The real solution is to fix the powerclamp driver by rewriting it with
a sane concept, but that's beyond the scope of this.
So the only solution for now is to remove the calls into the core NOHZ
code from the powerclamp trainwreck along with the exports.
Fixes: d6d71ee4a14a "PM: Introduce Intel PowerClamp Driver"
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Pan Jacob jun <jacob.jun.pan@intel.com>
Cc: LKP <lkp@01.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412181110110.17382@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Reported-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Commit 85c116a6cb91 ("perf callchain: Make get_srcline fall back to sym+offset")
introduces asprintf() call and matches '%ld' to a u64 argument, which is
incorrect on ARM:
CC /home/wn/util/srcline.o
util/srcline.c: In function 'get_srcline':
util/srcline.c:297:6: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'u64' [-Werror=format]
cc1: all warnings being treated as errors
make[1]: *** [/home/wn/util/srcline.o] Error 1
In addition, all users of get_srcline() use u64 addr, and libbfd
also use 64 bit bfd_vma as address. This patch also fix
prototype of get_srcline() and addr2line() to use u64 addr
instead of unsigned long.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: <lizefan@huawei.com>
Cc: <a.p.zijlstra@chello.nl>
Cc: <paulus@samba.org>
Cc: <acme@kernel.org>
Cc: <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1418710746-35943-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This reverts commit f8781db8aeb18d (ASoC: dapm: Augment existing card
DAPM routes in snd_soc_of_parse_audio_routing) since it is broken for
deferred probing as it ends up storing data allocated with devm_ over
multiple instantiations of the device.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This list is supposed to be sorted, to reduce patch collisions.
Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently functions in zsmalloc.c does not arranged in a readable and
reasonable sequence. With the more and more functions added, we may
meet below inconvenience. For example:
Current functions:
void zs_init()
{
}
static void get_maxobj_per_zspage()
{
}
Then I want to add a func_1() which is called from zs_init(), and this
new added function func_1() will used get_maxobj_per_zspage() which is
defined below zs_init().
void func_1()
{
get_maxobj_per_zspage()
}
void zs_init()
{
func_1()
}
static void get_maxobj_per_zspage()
{
}
This will cause compiling issue. So we must add a declaration:
static void get_maxobj_per_zspage();
before func_1() if we do not put get_maxobj_per_zspage() before
func_1().
In addition, puting module_[init|exit] functions at the bottom of the
file conforms to our habit.
So, this patch ajusts function sequence as:
/* helper functions */
...
obj_location_to_handle()
...
/* Some exported functions */
...
zs_map_object()
zs_unmap_object()
zs_malloc()
zs_free()
zs_init()
zs_exit()
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For buffer write, page lock will be got in write_begin and released in
write_end, in ocfs2_write_end_nolock(), before it unlock the page in
ocfs2_free_write_ctxt(), it calls ocfs2_run_deallocs(), this will ask
for the read lock of journal->j_trans_barrier. Holding page lock and
ask for journal->j_trans_barrier breaks the locking order.
This will cause a deadlock with journal commit threads, ocfs2cmt will
get write lock of journal->j_trans_barrier first, then it wakes up
kjournald2 to do the commit work, at last it waits until done. To
commit journal, kjournald2 needs flushing data first, it needs get the
cache page lock.
Since some ocfs2 cluster locks are holding by write process, this
deadlock may hung the whole cluster.
unlock pages before ocfs2_run_deallocs() can fix the locking order, also
put unlock before ocfs2_commit_trans() to make page lock is unlocked
before j_trans_barrier to preserve unlocking order.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit ac4fef4d23ed ("ocfs2/dlm: do not purge lockres that is queued for
assert master") may have the following possible race case:
dlm_dispatch_assert_master dlm_wq
========================================================================
queue_work(dlm->quedlm_worker,
&dlm->dispatched_work);
dispatch work,
dlm_lockres_drop_inflight_worker
*BUG_ON(res->inflight_assert_workers == 0)*
dlm_lockres_grab_inflight_worker
inflight_assert_workers++
So ensure inflight_assert_workers to be increased first.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Xue jiufei <xuejiufei@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When running ocfs2 test suite multiple nodes reflink stress test, for a
4 nodes cluster, every unlink() for refcounted file needs about 700s.
The slow unlink is caused by the contention of refcount tree lock since
all nodes are unlink files using the same refcount tree. When the
unlinking file have many extents(over 1600 in our test), most of the
extents has refcounted flag set. In ocfs2_commit_truncate(), it will
execute the following call trace for every extents. This means it needs
get and released refcount tree lock about 1600 times. And when several
nodes are do this at the same time, the performance will be very low.
ocfs2_remove_btree_range()
-- ocfs2_lock_refcount_tree()
---- ocfs2_refcount_lock()
------ __ocfs2_cluster_lock()
ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to
do lock/unlock once can improve a lot performance.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Wengang <wen.gang.wang@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Belatedly document the changes in commit f0c6d4d295e4 ("mm: introduce
do_shared_fault() and drop do_fault()").
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add my new email address along with kernel.org email id
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add cma reserved information which is currently shown as a part of total
reserved only. This patch is continuation of our previous cma patches
related to this.
https://lkml.org/lkml/2014/10/20/64
https://lkml.org/lkml/2014/10/22/383
[akpm@linux-foundation.org: remove hopefully-unneeded ifdefs]
Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch include CMA info (CMATotal, CMAFree) in /proc/meminfo.
Currently, in a CMA enabled system, if somebody wants to know the total
CMA size declared, there is no way to tell, other than the dmesg or
/var/log/messages logs.
With this patch we are showing the CMA info as part of meminfo, so that it
can be determined at any point of time. This will be populated only when
CMA is enabled.
Below is the sample output from a ARM based device with RAM:512MB and CMA:16MB.
MemTotal: 471172 kB
MemFree: 111712 kB
MemAvailable: 271172 kB
.
.
.
CmaTotal: 16384 kB
CmaFree: 6144 kB
This patch also fix below checkpatch errors that were found during these changes.
ERROR: space required after that ',' (ctx:ExV)
199: FILE: fs/proc/meminfo.c:199:
+ ,atomic_long_read(&num_poisoned_pages) << (PAGE_SHIFT - 10)
^
ERROR: space required after that ',' (ctx:ExV)
202: FILE: fs/proc/meminfo.c:202:
+ ,K(global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) *
^
ERROR: space required after that ',' (ctx:ExV)
206: FILE: fs/proc/meminfo.c:206:
+ ,K(totalcma_pages)
^
total: 3 errors, 0 warnings, 2 checks, 236 lines checked
Signed-off-by: Pintu Kumar <pintu.k@samsung.com>
Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the system boots up, in the dmesg logs we can see the memory
statistics along with total reserved as below. Memory: 458840k/458840k
available, 65448k reserved, 0K highmem
When CMA is enabled, still the total reserved memory remains the same.
However, the CMA memory is not considered as reserved. But, when we see
/proc/meminfo, the CMA memory is part of free memory. This creates
confusion. This patch corrects the problem by properly subtracting the
CMA reserved memory from the total reserved memory in dmesg logs.
Below is the dmesg snapshot from an arm based device with 512MB RAM and
12MB single CMA region.
Before this change:
Memory: 458840k/458840k available, 65448k reserved, 0K highmem
After this change:
Memory: 458840k/458840k available, 53160k reserved, 12288k cma-reserved, 0K highmem
Signed-off-by: Pintu Kumar <pintu.k@samsung.com>
Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Longname is not correctly handled by hfsplus driver. If an attempt to
create a longname(>255) file/directory is made, it succeeds by creating a
file/directory with HFSPLUS_MAX_STRLEN and incorrect catalog key. Thus
leaving the volume in an inconsistent state. This patch fixes this issue.
Although lookup is always called first to create a negative entry, so just
doing a check in lookup would probably fix this issue. I choose to
propagate error to other iops as well.
Please NOTE: I have factored out hfsplus_cat_build_key_with_cnid from
hfsplus_cat_build_key, to avoid unncessary branching.
Thanks a lot.
TEST:
------
dir="TEST_DIR"
cdir=`pwd`
name255="_123456789_123456789_123456789_123456789_123456789_123456789\
_123456789_123456789_123456789_123456789_123456789_123456789_123456789\
_123456789_123456789_123456789_123456789_123456789_123456789_123456789\
_123456789_123456789_123456789_123456789_123456789_1234"
name256="${name255}5"
mkdir $dir
cd $dir
touch $name255
rm -f $name255
touch $name256
ls -la
cd $cdir
rm -rf $dir
RESULT:
-------
[sougata@ultrabook tmp]$ cdir=`pwd`
[sougata@ultrabook tmp]$
name255="_123456789_123456789_123456789_123456789_123456789_123456789\
> _123456789_123456789_123456789_123456789_123456789_123456789_123456789\
> _123456789_123456789_123456789_123456789_123456789_123456789_123456789\
> _123456789_123456789_123456789_123456789_123456789_1234"
[sougata@ultrabook tmp]$ name256="${name255}5"
[sougata@ultrabook tmp]$
[sougata@ultrabook tmp]$ mkdir $dir
[sougata@ultrabook tmp]$ cd $dir
[sougata@ultrabook TEST_DIR]$ touch $name255
[sougata@ultrabook TEST_DIR]$ rm -f $name255
[sougata@ultrabook TEST_DIR]$ touch $name256
[sougata@ultrabook TEST_DIR]$ ls -la
ls: cannot access
_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234:
No such file or directory
total 0
drwxrwxr-x 1 sougata sougata 3 Feb 20 19:56 .
drwxrwxrwx 1 root root 6 Feb 20 19:56 ..
-????????? ? ? ? ? ?
_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234
[sougata@ultrabook TEST_DIR]$ cd $cdir
[sougata@ultrabook tmp]$ rm -rf $dir
rm: cannot remove `TEST_DIR': Directory not empty
-ENAMETOOLONG returned from hfsplus_asc2uni was not propaged to iops.
This allowed hfsplus to create files/directories with HFSPLUS_MAX_STRLEN
and incorrect keys, leaving the FS in an inconsistent state. This patch
fixes this issue.
Signed-off-by: Sougata Santra <sougata@tuxera.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When nodes is true, nsc->mask2 has already been filtered by nsc->mask1,
which has already factored in node_states[N_MEMORY].
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch changes core_scsi3_pro_release() logic to allow an
existing AllRegistrants type reservation to be re-reserved by
any registered I_T nexus.
This addresses a issue where AllRegistrants type RESERVE was
receiving RESERVATION_CONFLICT status if dev_pr_res_holder did
not match the same I_T nexus, instead of just returning GOOD
status following spc4r34 Section 5.9.9:
"If the device server receives a PERSISTENT RESERVE OUT command
with RESERVE service action where the TYPE field and the SCOPE
field contain the same values as the existing type and scope
from a persistent reservation holder, it shall not make any
change to the existing persistent reservation and shall complete
the command with GOOD status."
Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
Rafal Redzimski
Jianqun Xu
Jie Yang
Fang, Yang A
Jarkko Nikula
Andrew Jackson
Linus Torvalds
Wolfram Sang
Jesper Nilsson
Sam Ravnborg
Rafael J. Wysocki
Dave Jones
Wolfram Sang
Thomas Gleixner
Al Viro
Wang Nan
Mark Brown
Andrew Morton
Ganesh Mahendran
Junxiao Bi
Joseph Qi
Santosh Shilimkar
Vishnu Pratap Singh
Pintu Kumar
Sougata Santra
Zhihui Zhang
Nicholas Bellinger