| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In preparation for using MTC packets to count cycles, record whether
decoding is between a PSB and PSBEND packets.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add field 'ipc' to display instructions-per-cycle.
Example:
perf record -e intel_pt/cyc/u ls
perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
ls 2670177.697113434: 7f0dfdbcd090 _start+0x0 mov %rsp, %rdi IPC: 0.00 (1/877)
ls 2670177.697113434: 7f0dfdbcd093 _start+0x3 callq 0x7f0dfdbce030
ls 2670177.697113434: 7f0dfdbce030 _dl_start+0x0 pushq %rbp
ls 2670177.697113434: 7f0dfdbce031 _dl_start+0x1 mov %rsp, %rbp
ls 2670177.697113434: 7f0dfdbce034 _dl_start+0x4 pushq %r15
ls 2670177.697113434: 7f0dfdbce036 _dl_start+0x6 pushq %r14
ls 2670177.697113434: 7f0dfdbce038 _dl_start+0x8 pushq %r13
ls 2670177.697113434: 7f0dfdbce03a _dl_start+0xa pushq %r12
ls 2670177.697113434: 7f0dfdbce03c _dl_start+0xc mov %rdi, %r12
ls 2670177.697113434: 7f0dfdbce03f _dl_start+0xf pushq %rbx
ls 2670177.697113434: 7f0dfdbce040 _dl_start+0x10 sub $0x38, %rsp
ls 2670177.697113434: 7f0dfdbce044 _dl_start+0x14 rdtsc
ls 2670177.697113434: 7f0dfdbce046 _dl_start+0x16 mov %eax, %eax
ls 2670177.697113434: 7f0dfdbce048 _dl_start+0x18 shl $0x20, %rdx
ls 2670177.697113434: 7f0dfdbce04c _dl_start+0x1c or %rax, %rdx
ls 2670177.697114471: 7f0dfdbce04f _dl_start+0x1f movq 0x27e22(%rip), %rax IPC: 0.00 (15/1685)
ls 2670177.697116177: 7f0dfdbce056 _dl_start+0x26 movq %rdx, 0x27683(%rip) IPC: 0.00 (1/881)
Note, the IPC values are low due to page faults at the beginning of
execution. The additional cycles are due to the time to enter the
kernel, not the actual kernel page fault handler.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Copy the incremental instruction count and cycle count onto 'instructions'
and 'branches' samples.
Because Intel PT does not update the cycle count on every branch or
instruction, the incremental values will often be zero.
When there are values, they will be the number of instructions and
number of cycles since the last update, and thus represent the average
IPC since the last IPC value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add counts of instructions and cycles, in order to represent
instructions-per-cycle (IPC).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation for providing instructions-per-cycle (IPC) information,
accumulate cycle count from CYC packets.
Although CYC packets are optional (requires config term 'cyc' to enable
cycle-accurate mode when recording), the simplest way to count cycles is
with CYC packets.
The first complication is that cycles must be counted only when also
counting instructions.
That means when control flow packet generation is enabled i.e. between
TIP.PGE and TIP.PGD packets.
Also, sampling the cycle count follows the same rules as sampling the
timestamp, that is, not before the instruction to which the decoder is
walking is reached.
In addition, the cycle count is not accurate for any but the first
branch of a TNT packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To eliminate some duplication and make the code more understandable,
factor out intel_pt_update_sample_time.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When DWARF stacks were requested and at the same time that the user
specifies a register set using the --user-regs option the full register
context was being captured on samples:
$ perf record -g --call-graph dwarf,1024 --user-regs=IP,SP,BP -- stack_test2.g.O3
188143843893585 0x6b48 [0x4f8]: PERF_RECORD_SAMPLE(IP, 0x4002): 23828/23828: 0x401236 period: 1363819 addr: 0x7ffedbdd51ac
... FP chain: nr:0
... user regs: mask 0xff0fff ABI 64-bit
.... AX 0x53b
.... BX 0x7ffedbdd3cc0
.... CX 0xffffffff
.... DX 0x33d3a
.... SI 0x7f09b74c38d0
.... DI 0x0
.... BP 0x401260
.... SP 0x7ffedbdd3cc0
.... IP 0x401236
.... FLAGS 0x20a
.... CS 0x33
.... SS 0x2b
.... R8 0x7f09b74c3800
.... R9 0x7f09b74c2da0
.... R10 0xfffffffffffff3ce
.... R11 0x246
.... R12 0x401070
.... R13 0x7ffedbdd5db0
.... R14 0x0
.... R15 0x0
... ustack: size 1024, offset 0xe0
. data_src: 0x5080021
... thread: stack_test2.g.O:23828
...... dso: /root/abudanko/stacks/stack_test2.g.O3
I.e. the --user-regs=IP,SP,BP was being ignored, being overridden by the
needs of --call-graph=dwarf.
After applying the change in this patch the sample data contains the
user specified register, but making sure that at least the minimal set
of register needed for DWARF unwinding (DWARF_MINIMAL_REGS) is
requested.
The user is warned that DWARF unwinding may not work if extra registers
end up being needed.
-g call-graph dwarf,K full_regs
--user-regs=user_regs user_regs
-g call-graph dwarf,K --user-regs=user_regs user_regs + DWARF_MINIMAL_REGS
$ perf record -g --call-graph dwarf,1024 --user-regs=BP -- ls
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
arch COPYING Documentation include Kbuild lbuild MAINTAINERS modules.builtin Module.symvers perf.data.old scripts System.map virt
block CREDITS drivers init Kconfig lib Makefile modules.builtin.modinfo net README security tools vmlinux
certs crypto fs ipc kernel LICENSES mm modules.order perf.data samples sound usr vmlinux.o
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
188368474305373 0x5e40 [0x470]: PERF_RECORD_SAMPLE(IP, 0x4002): 23839/23839: 0x401236 period: 1260507 addr: 0x7ffd3d85e96c
... FP chain: nr:0
... user regs: mask 0x1c0 ABI 64-bit
.... BP 0x401260
.... SP 0x7ffd3d85cc20
.... IP 0x401236
... ustack: size 1024, offset 0x58
. data_src: 0x5080021
Committer notes:
Detected build failures on arches where PERF_REGS_ is not available,
such as debian:experimental-x-{mips,mips64,mipsel}, fedora 24 and 30 for
ARC uClibc and glibc, reported to Alexey that provided a patch moving
the DWARF_MINIMAL_REGS from evsel.c to util/perf_regs.h, where it is
guarded by an HAVE_PERF_REGS_SUPPORT ifdef.
Committer testing:
# perf record --user-regs=bp,ax -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.955 MB perf.data (1773 samples) ]
# perf script -F+uregs | grep AX: | head -5
perf 1719 [000] 181.272398: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272402: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272403: 8 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272405: 181 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272406: 4405 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
# perf record --call-graph=dwarf --user-regs=bp,ax -a sleep 1
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
[ perf record: Woken up 55 times to write data ]
[ perf record: Captured and wrote 24.184 MB perf.data (2841 samples) ]
[root@quaco ~]# perf script --hide-call-graph -F+uregs | grep AX: | head -5
perf 1729 [000] 211.268006: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268014: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268017: 5 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268020: 48 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268024: 490 cycles: ffffffffba00e471 intel_bts_enable_local+0x21 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
#
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/e7fd37b1-af22-0d94-a0dc-5895e803bbfe@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Variable 'err' is defined but never used in function symsrc__init(),
remove it and directly return -1 at the end of the function.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190530093801.20510-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_DIR_FORMAT header, do it now from comments in the patch
introducing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Fixes: 258031c017c3 ("perf header: Add DIR_FORMAT feature to describe directory data")
Link: https://lkml.kernel.org/n/tip-jbrzb7ijb5al33gi8br6f9rr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_CLOCKID header, do it now from comments in the patch introducing
it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Fixes: cf7905165fee ("perf record: Encode -k clockid frequency into Perf trace")
Link: https://lkml.kernel.org/n/tip-slhnjp06027j3ae17qqetzxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_MEM_TOPOLOGY header, do it now from comments in the patch
introducing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Simon Que <sque@chromium.org>
Fixes: e2091cedd51b ("perf tools: Add MEM_TOPOLOGY feature to perf data file")
Link: https://lkml.kernel.org/n/tip-h5lcm1nbe9ztxwm61gmadd56@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch addes description of HEADER_BPF_PROG_INFO and HEADER_BPF_BTF to
perf.data-file-format.txt.
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 606f972b1361 ("perf bpf: Save bpf_prog_info information as headers to perf.data")
Link: http://lkml.kernel.org/r/20190521064406.2498925-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Using the new pmu::update_attrs attribute group for default
attributes - freeze_on_smi, allow_tsx_force_abort.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-10-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using the new pmu::update_attrs attribute group for
skylake specific format attributes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-9-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using the new pmu::update_attrs attribute group for
extra "format" directory.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-8-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using the new pmu::update_attrs attribute group for
"caps" directory.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-7-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We dont need to pre-filter out unsupported base events,
we can just use its group's is_visible function to do this.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-6-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using the new pmu::update_attrs attribute group to
create detected events for x86_pmu.
Moving the topdown/memory/tsx attributes to separate
attribute groups with specific is_visible functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-5-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Nobody is using that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-4-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Adding attr_update attribute group into pmu, to allow
having multiple attribute groups for same group name.
This will allow us to update "events" or "format"
directories with attributes that depend on various
HW conditions.
For example having group_format_extra group that updates
"format" directory only if pmu version is 2 and higher:
static umode_t
exra_is_visible(struct kobject *kobj, struct attribute *attr, int i)
{
return x86_pmu.version >= 2 ? attr->mode : 0;
}
static struct attribute_group group_format_extra = {
.name = "format",
.is_visible = exra_is_visible,
};
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-3-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Adding sysfs_update_groups function to update
multiple groups.
sysfs_update_groups - given a directory kobject, create a bunch of attribute groups
@kobj: The kobject to update the group on
@groups: The attribute groups to update, NULL terminated
This function update a bunch of attribute groups. If an error occurs when
updating a group, all previously updated groups will be removed together
with already existing (not updated) attributes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-2-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
AmberLake and WhiskeyLake have same client uncore events as
KabyLake. Thus add the PCI IDs for AmberLake Y processor lines,
for WhiskeyLake U processor lines and for KabyLake, add H
processor line and workstation.
Platform Device ID
================================
AML Y 2 Core 590Ch
KBL H 4 Core 5910h
KBL 4 Core WorkStation 5918h
WHL U 4 Core 3ED0h
WHL U 4 Core 3E34h
WHL U 2 Core 3E35h
AML Y 4 Core 590Dh
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Charles Prestopine <charles.d.prestopine@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190511000311.20733-2-gayatri.kammela@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Improve code readability by adding tabs after #define macros
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Charles Prestopine <charles.d.prestopine@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190511000311.20733-1-gayatri.kammela@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, non-privileged user could only use uprobe with
kernel.perf_event_paranoid = -1
However, setting perf_event_paranoid to -1 leaks other users' processes to
non-privileged uprobes.
To introduce proper permission control of uprobes, we are building the
following system:
A daemon with CAP_SYS_ADMIN is in charge to create uprobes via tracefs;
Users asks the daemon to create uprobes;
Then user can attach uprobe only to processes owned by the user.
This patch allows non-privileged user to attach uprobe to processes owned
by the user.
The following example shows how to use uprobe with non-privileged user.
This is based on Brendan's blog post [1]
1. Create uprobe with root:
sudo perf probe -x 'readline%return +0($retval):string'
2. Then non-root user can use the uprobe as:
perf record -vvv -e probe_bash:readline__return -p <pid> sleep 20
perf script
[1] http://www.brendangregg.com/blog/2015-06-28/linux-ftrace-uprobe.html
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190507161545.788381-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
|
When we have holes in a normal memory zone, we could endup having
cached_migrate_pfns which may not necessarily be valid, under heavy memory
pressure with swapping enabled ( via __reset_isolation_suitable(),
triggered by kswapd).
Later if we fail to find a page via fast_isolate_freepages(), we may end
up using the migrate_pfn we started the search with, as valid page. This
could lead to accessing NULL pointer derefernces like below, due to an
invalid mem_section pointer.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [47/1825]
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000082f94ae9
[0000000000000008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
...
CPU: 10 PID: 6080 Comm: qemu-system-aar Not tainted 510-rc1+ #6
Hardware name: AmpereComputing(R) OSPREY EV-883832-X3-0001/OSPREY, BIOS 4819 09/25/2018
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : set_pfnblock_flags_mask+0x58/0xe8
lr : compaction_alloc+0x300/0x950
[...]
Process qemu-system-aar (pid: 6080, stack limit = 0x0000000095070da5)
Call trace:
set_pfnblock_flags_mask+0x58/0xe8
compaction_alloc+0x300/0x950
migrate_pages+0x1a4/0xbb0
compact_zone+0x750/0xde8
compact_zone_order+0xd8/0x118
try_to_compact_pages+0xb4/0x290
__alloc_pages_direct_compact+0x84/0x1e0
__alloc_pages_nodemask+0x5e0/0xe18
alloc_pages_vma+0x1cc/0x210
do_huge_pmd_anonymous_page+0x108/0x7c8
__handle_mm_fault+0xdd4/0x1190
handle_mm_fault+0x114/0x1c0
__get_user_pages+0x198/0x3c0
get_user_pages_unlocked+0xb4/0x1d8
__gfn_to_pfn_memslot+0x12c/0x3b8
gfn_to_pfn_prot+0x4c/0x60
kvm_handle_guest_abort+0x4b0/0xcd8
handle_exit+0x140/0x1b8
kvm_arch_vcpu_ioctl_run+0x260/0x768
kvm_vcpu_ioctl+0x490/0x898
do_vfs_ioctl+0xc4/0x898
ksys_ioctl+0x8c/0xa0
__arm64_sys_ioctl+0x28/0x38
el0_svc_common+0x74/0x118
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
Code: f8607840 f100001f 8b011401 9a801020 (f9400400)
---[ end trace af6a35219325a9b6 ]---
The issue was reported on an arm64 server with 128GB with holes in the
zone (e.g, [32GB@4GB, 96GB@544GB]), with a swap device enabled, while
running 100 KVM guest instances.
This patch fixes the issue by ensuring that the page belongs to a valid
PFN when we fallback to using the lower limit of the scan range upon
failure in fast_isolate_freepages().
Link: http://lkml.kernel.org/r/1558711908-15688-1-git-send-email-suzuki.poulose@arm.com
Fixes: 5a811889de10f1eb ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The DOC comment block section in include/linux/generic-radix-tree.h
contained a spurious colon, causing this warning in the documentation
build:
include/linux/generic-radix-tree.h:1: warning: no structured comments found
Remove the colon and make the docs build happy.
Link: http://lkml.kernel.org/r/20190524141933.74ae9050@lwn.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the fixes commit, removing SIGKILL from each thread signal mask and
executing "goto fatal" directly will skip the call to
"trace_signal_deliver". At this point, the delivery tracking of the
SIGKILL signal will be inaccurate.
Therefore, we need to add trace_signal_deliver before "goto fatal" after
executing sigdelset.
Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info.
Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com
Fixes: cf43a757fd4944 ("signal: Restore the stop PTRACE_EVENT_EXIT")
Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com>
Reviewed-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ivan Delalande <colona@arista.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit cf04eee8bf0e ("iommu/vt-d: Include ACPI devices in iommu=pt")
added for_each_active_iommu() in iommu_prepare_static_identity_mapping()
but never used the each element, i.e, "drhd->iommu".
drivers/iommu/intel-iommu.c: In function
'iommu_prepare_static_identity_mapping':
drivers/iommu/intel-iommu.c:3037:22: warning: variable 'iommu' set but
not used [-Wunused-but-set-variable]
struct intel_iommu *iommu;
Fixed the warning by appending a compiler attribute __maybe_unused for it.
Link: http://lkml.kernel.org/r/20190523013314.2732-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The LICENSE directory has recently changed structure and this makes
spdxcheck fails as per below:
FAIL: "Blob or Tree named 'other' not found"
Traceback (most recent call last):
File "scripts/spdxcheck.py", line 240, in <module>
spdx = read_spdxdata(repo)
File "scripts/spdxcheck.py", line 41, in read_spdxdata
for el in lictree[d].traverse():
[...]
KeyError: "Blob or Tree named 'other' not found"
Fix the script to restore the correctness on checkpatch License checking.
References: 62be257e986d ("LICENSES: Rename other to deprecated")
References: 8ea8814fcdcb ("LICENSES: Clearly mark dual license only licenses")
Link: http://lkml.kernel.org/r/20190523084755.56739-1-vincenzo.frascino@arm.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When building with -Wuninitialized and CONFIG_KASAN_SW_TAGS unset, Clang
warns:
mm/kasan/common.c:484:40: warning: variable 'tag' is uninitialized when
used here [-Wuninitialized]
kasan_unpoison_shadow(set_tag(object, tag), size);
^~~
set_tag ignores tag in this configuration but clang doesn't realize it at
this point in its pipeline, as it points to arch_kasan_set_tag as being
the point where it is used, which will later be expanded to (void
*)(object) without a use of tag. Initialize tag to 0xff, as it removes
this warning and doesn't change the meaning of the code.
Link: https://github.com/ClangBuiltLinux/linux/issues/465
Link: http://lkml.kernel.org/r/20190502163057.6603-1-natechancellor@gmail.com
Fixes: 7f94ffbc4c6a ("kasan: add hooks implementation for tag-based mode")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kmem_cache_alloc() may be called from z3fold_alloc() in atomic context, so
we need to pass correct gfp flags to avoid "scheduling while atomic" bug.
Link: http://lkml.kernel.org/r/20190523153245.119dfeed55927e8755250ddd@gmail.com
Fixes: 7c2b8baa61fe5 ("mm/z3fold.c: add structure for buddy handles")
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CLK_GET_RATE_NOCACHE depends on CONFIG_COMMON_CLK. Importing constants.py
when CONFIG_COMMON_CLK is not defined causes:
(gdb) lx-symbols
(...)
File "scripts/gdb/linux/proc.py", line 15, in <module>
from linux import constants
File "scripts/gdb/linux/constants.py", line 2, in <module>
LX_CLK_GET_RATE_NOCACHE = gdb.parse_and_eval("CLK_GET_RATE_NOCACHE")
gdb.error: No symbol "CLK_GET_RATE_NOCACHE" in current context.
Link: http://lkml.kernel.org/r/20190523195313.24701-1-farosas@linux.ibm.com
Fixes: e7e6f462c1be ("scripts/gdb: print cached rate in lx-clk-summary")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When get_user_pages*() is called with pages = NULL, the processing of
VM_FAULT_RETRY terminates early without actually retrying to fault-in all
the pages.
If the pages in the requested range belong to a VMA that has userfaultfd
registered, handle_userfault() returns VM_FAULT_RETRY *after* user space
has populated the page, but for the gup pre-fault case there's no actual
retry and the caller will get no pages although they are present.
This issue was uncovered when running post-copy memory restore in CRIU
after d9c9ce34ed5c ("x86/fpu: Fault-in user stack if
copy_fpstate_to_sigframe() fails").
After this change, the copying of FPU state to the sigframe switched from
copy_to_user() variants which caused a real page fault to get_user_pages()
with pages parameter set to NULL.
In post-copy mode of CRIU, the destination memory is managed with
userfaultfd and lack of the retry for pre-fault case in get_user_pages()
causes a crash of the restored process.
Making the pre-fault behavior of get_user_pages() the same as the "normal"
one fixes the issue.
Link: http://lkml.kernel.org/r/1557844195-18882-1-git-send-email-rppt@linux.ibm.com
Fixes: d9c9ce34ed5c ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Andrei Vagin <avagin@gmail.com> [https://travis-ci.org/avagin/linux/builds/533184940]
Tested-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If a call to kobject_init_and_add() fails we should call kobject_put()
otherwise we leak memory.
Add call to kobject_put() in the error path of call to
kobject_init_and_add(). Please note, this has the side effect that the
release method is called if kobject_init_and_add() fails.
Link: http://lkml.kernel.org/r/20190513033458.2824-1-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have a single node system with node 0 disabled:
Scanning NUMA topology in Northbridge 24
Number of physical nodes 2
Skipping disabled node 0
Node 1 MemBase 0000000000000000 Limit 00000000fbff0000
NODE_DATA(1) allocated [mem 0xfbfda000-0xfbfeffff]
This causes crashes in memcg when system boots:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
#PF error: [normal kernel read fault]
...
RIP: 0010:list_lru_add+0x94/0x170
...
Call Trace:
d_lru_add+0x44/0x50
dput.part.34+0xfc/0x110
__fput+0x108/0x230
task_work_run+0x9f/0xc0
exit_to_usermode_loop+0xf5/0x100
It is reproducible as far as 4.12. I did not try older kernels. You have
to have a new enough systemd, e.g. 241 (the reason is unknown -- was not
investigated). Cannot be reproduced with systemd 234.
The system crashes because the size of lru array is never updated in
memcg_update_all_list_lrus and the reads are past the zero-sized array,
causing dereferences of random memory.
The root cause are list_lru_memcg_aware checks in the list_lru code. The
test in list_lru_memcg_aware is broken: it assumes node 0 is always
present, but it is not true on some systems as can be seen above.
So fix this by avoiding checks on node 0. Remember the memcg-awareness by
a bool flag in struct list_lru.
Link: http://lkml.kernel.org/r/20190522091940.3615-1-jslaby@suse.cz
Fixes: 60d3fd32a7a9 ("list_lru: introduce per-memcg lists")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
memory.stat and other files already consider subtrees in their output, and
we should too in order to not present an inconsistent interface.
The current situation is fairly confusing, because people interacting with
cgroups expect hierarchical behaviour in the vein of memory.stat,
cgroup.events, and other files. For example, this causes confusion when
debugging reclaim events under low, as currently these always read "0" at
non-leaf memcg nodes, which frequently causes people to misdiagnose breach
behaviour. The same confusion applies to other counters in this file when
debugging issues.
Aggregation is done at write time instead of at read-time since these
counters aren't hot (unlike memory.stat which is per-page, so it does it
at read time), and it makes sense to bundle this with the file
notifications.
After this patch, events are propagated up the hierarchy:
[root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events
low 0
high 0
max 0
oom 0
oom_kill 0
[root@ktst ~]# systemd-run -p MemoryMax=1 true
Running as unit: run-r251162a189fb4562b9dabfdc9b0422f5.service
[root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events
low 0
high 0
max 7
oom 1
oom_kill 1
As this is a change in behaviour, this can be reverted to the old
behaviour by mounting with the `memory_localevents' flag set. However, we
use the new behaviour by default as there's a lack of evidence that there
are any current users of memory.events that would find this change
undesirable.
akpm: this is a behaviour change, so Cc:stable. THis is so that
forthcoming distros which use cgroup v2 are more likely to pick up the
revised behaviour.
Link: http://lkml.kernel.org/r/20190208224419.GA24772@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The commit a3b609ef9f8b ("proc read mm's {arg,env}_{start,end} with mmap
semaphore taken.") added synchronization of reading argument/environment
boundaries under mmap_sem. Later commit 88aa7cc688d4 ("mm: introduce
arg_lock to protect arg_start|end and env_start|end in mm_struct") avoided
the coarse use of mmap_sem in similar situations. But there still
remained two places that (mis)use mmap_sem.
get_cmdline should also use arg_lock instead of mmap_sem when it reads the
boundaries.
The second place that should use arg_lock is in prctl_set_mm. By
protecting the boundaries fields with the arg_lock, we can downgrade
mmap_sem to reader lock (analogous to what we already do in
prctl_set_mm_map).
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20190502125203.24014-3-mkoutny@suse.com
Fixes: 88aa7cc688d4 ("mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Co-developed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Despite comment of validate_prctl_map claims there are no capability
checks, it is not completely true since commit 4d28df6152aa ("prctl: Allow
local CAP_SYS_ADMIN changing exe_file"). Extract the check out of the
function and make the function perform purely arithmetic checks.
This patch should not change any behavior, it is mere refactoring for
following patch.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20190502125203.24014-2-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix build warning,
kernel/fork.c:125:5: warning: symbol 'max_threads' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20190516015118.140561-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
include/linux/cpumask.h: In function 'cpumask_parse':
include/linux/cpumask.h:636:21: error: implicit declaration of function 'strchrnul'; did you mean 'strchr'? [-Werror=implicit-function-declaration]
Because arch/arm/boot/compressed/decompress.c does
#define _LINUX_STRING_H_
preventing linux/string.h from providing strchrnul. It also #includes
asm/string.h, which for arm has a declaration of strchr(), explaining why
this didn't use to fail.
Link: http://lkml.kernel.org/r/20190528115346.f5a7kn3hdnuf5rts@linutronix.de
Fixes: 3713a4e1fdb8d ("include/linux/cpumask.h: fix double string traverse in cpumask_parse")
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Yury Norov <ynorov@marvell.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_DEBUG_SLAB_LEAK has been removed, so remove it from defconfig.
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1905201015460.96074@chino.kir.corp.google.com
Fixes: 7878c231dae0 ("slab: remove /proc/slab_allocators")
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reported-by: Nicholas Joll <najoll@posteo.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc notation in lib/sort.c by using correct function parameter
names.
lib/sort.c:59: warning: Excess function parameter 'size' description in 'swap_words_32'
lib/sort.c:83: warning: Excess function parameter 'size' description in 'swap_words_64'
lib/sort.c:110: warning: Excess function parameter 'size' description in 'swap_bytes'
Link: http://lkml.kernel.org/r/60e25d3d-68d1-bde2-3b39-e4baa0b14907@infradead.org
Fixes: 37d0ec34d111a ("lib/sort: make swap functions more generic")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: George Spelvin <lkml@sdf.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix Sphinx warnings in Documentation/vm/hmm.rst by using "::" notation and
inserting a blank line. Also add a missing ';'.
Documentation/vm/hmm.rst:292: WARNING: Unexpected indentation.
Documentation/vm/hmm.rst:300: WARNING: Unexpected indentation.
Link: http://lkml.kernel.org/r/c5995359-7c82-4e47-c7be-b58a4dda0953@infradead.org
Fixes: 023a019a9b4e ("mm/hmm: add default fault flags to avoid the need to pre-fill pfns arrays")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prior to the adoption of SPDX, it was difficult for tools to determine
the correct license due to incomplete or badly formatted license text.
The SPDX solves this issue, assuming people can correctly spell
"SPDX-License-Identifier" although this assumption is broken in some
places.
Since scripts/spdxcheck.py parses only lines that exactly matches to
the correct tag, it cannot (should not) detect this kind of error.
If the correct tag is missing, scripts/checkpatch.pl warns like this:
WARNING: Missing or malformed SPDX-License-Identifier tag in line *
So, people should notice it before the patch submission, but in reality
broken tags sometimes slip in. The checkpatch warning is not useful for
checking the committed files globally since large number of files still
have no SPDX tag.
Also, I am not sure about the legal effect when the SPDX tag is broken.
Anyway, these typos are absolutely worth fixing. It is pretty easy to
find suspicious lines by grep.
$ git grep --not -e SPDX-License-Identifier --and -e SPDX- -- \
:^LICENSES :^scripts/spdxcheck.py :^*/license-rules.rst
arch/arm/kernel/bugs.c:// SPDX-Identifier: GPL-2.0
drivers/phy/st/phy-stm32-usbphyc.c:// SPDX-Licence-Identifier: GPL-2.0
drivers/pinctrl/sh-pfc/pfc-r8a77980.c:// SPDX-Lincense-Identifier: GPL 2.0
lib/test_stackinit.c:// SPDX-Licenses: GPLv2
sound/soc/codecs/max9759.c:// SPDX-Licence-Identifier: GPL-2.0
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Causes error: drivers/crypto/ux500/cryp/Makefile:5: *** missing
separator. Stop.
Fixes: af873fcecef5 ("treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194")
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
While troubleshooting issues where cloned request limits have been
exceeded, it is often beneficial to know the actual values that
have been breached. Print these values, assisting in ease of
identification of root cause of the breach.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Adrian Hunter
Alexey Budankov
Leo Yan
Arnaldo Carvalho de Melo
Song Liu
Jiri Olsa
Gayatri Kammela
Linus Torvalds
Suzuki K Poulose
Jonathan Corbet
Zhenliang Wei
Qian Cai
Vincenzo Frascino
Nathan Chancellor
Vitaly Wool
Fabiano Rosas
Mike Rapoport
Tobin C. Harding
Jiri Slaby
Chris Down
Michal Koutný
Kefeng Wang
Sebastian Andrzej Siewior
David Rientjes
Andrew Morton
Randy Dunlap
Masahiro Yamada
Alex Xu (Hello71)
Wolfram Sang
John Pittman