aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-04RISC-V: Assign hwcap as per comman capabilities.Atish Patra1-19/+22
Currently, we set hwcap based on first valid hart from DT. This may not be correct always as that hart might not be current booting cpu or may have a different capability. Set hwcap as the capabilities supported by all possible harts with "okay" status. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-04RISC-V: Compare cpuid with NR_CPUS before mapping.Atish Patra1-0/+5
We should never have a cpuid greater that NR_CPUS. Compare with NR_CPUS before creating the mapping between logical and physical CPU ids. This is also mandatory as NR_CPUS check is removed from riscv_of_processor_hartid. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-04RISC-V: Allow hartid-to-cpuid function to fail.Atish Patra1-1/+0
It is perfectly okay to call riscv_hartid_to_cpuid for a hartid that is not mapped with an CPU id. It can happen if the calling functions retrieves the hartid from DT. However, that hartid was never brought online by the firmware or kernel for any reasons. No need to BUG() in the above case. A negative error return is sufficient and the calling function should check for the return value always. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-04RISC-V: Remove NR_CPUs check during hartid search from DTAtish Patra1-4/+0
In non-smp configuration, hartid can be higher that NR_CPUS. riscv_of_processor_hartid should not be compared to hartid to NR_CPUS in that case. Moreover, this function checks all the DT properties of a hart node. NR_CPUS comparison seems out of place. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-04RISC-V: Move cpuid to hartid mapping to SMP.Atish Patra3-14/+22
Currently, logical CPU id to physical hartid mapping is defined for both smp and non-smp configurations. This is not required as we need this only for smp configuration. The mapping function can define directly boot_cpu_hartid for non-smp use case. The reverse mapping function i.e. hartid to cpuid can be called for any valid but not booted harts. So it should return default cpu 0 only if it is a boot hartid. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-04RISC-V: Do not wait indefinitely in __cpu_upAtish Patra1-3/+12
In SMP path, __cpu_up waits for other CPU to come online indefinitely. This is wrong as other CPU might be disabled in machine mode and possible CPU is set to the cpus present in DT. Introduce a completion variable and waits only for a second. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-19riscv: remove the HAVE_KPROBES optionChristoph Hellwig1-3/+0
HAVE_KPROBES is defined genericly in arch/Kconfig and architectures should just select it if supported. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-11riscv: use for_each_of_cpu_node iteratorJohan Hovold2-4/+5
Use the new for_each_of_cpu_node() helper to iterate over cpu nodes instead of open coding. Note that this will allow matching also on the node name instead of the (for FDT) deprecated device_type property. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-11riscv: treat cpu devicetree nodes without status as enabledJohan Hovold1-7/+3
Follow the Linux convention and treat devicetree nodes without a status property as enabled rather than disabled, while also allowing "ok" as a shorthand for "okay". Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-11riscv: fix riscv_of_processor_hartid() commentJohan Hovold1-9/+9
The riscv_of_processor_hartid() helper returns -ENODEV when the specified node isn't an enabled and valid RISC-V hart node. Also drop the unnecessary parenthesis around errno defines. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-11riscv: use pr_info and friendsJohan Hovold1-3/+3
Use the pr_info and pr_err macros instead of printk with explicit log levels. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-11riscv: add missing newlines to printk messagesJohan Hovold3-6/+6
Add missing newline characters to printk messages. Also replace two pr_warning with the shorter pr_warn, and fix up the tense of one error message while at it. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-11Revert "RISC-V: Make BSS section as the last section in vmlinux.lds.S"Palmer Dabbelt1-6/+2
At least BBL relies on the flat binaries containing all the bytes in the actual image to exist in the file. Before this revert the flat images dropped the trailing zeros, which caused BBL to put its copy of the device tree where Linux thought the BSS was, which wreaks all sorts of havoc. Manifesting the bug is a bit subtle because BBL aligns everything to 2MiB page boundaries, but with large enough kernels you're almost certain to get bitten by the bug. While moving the sections around isn't a great long-term fix, it will at least avoid producing broken images. This reverts commit 22e6a2e14cb8ebcae059488cf24e778e4058c2bf. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-02-11riscv: Add pte bit to distinguish swap from invalidStefan O'Rear2-4/+10
Previously, invalid PTEs and swap PTEs had the same binary representation, causing errors when attempting to unmap PROT_NONE mappings, including implicit unmap on exit. Typical error: swap_info_get: Bad swap file entry 40000000007a9879 BUG: Bad page map in process a.out pte:3d4c3cc0 pmd:3e521401 Cc: stable@vger.kernel.org Signed-off-by: Stefan O'Rear <sorear2@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-10Linux 5.0-rc6Linus Torvalds1-1/+1
2019-02-10x86/mm: Make set_pmd_at() paravirt awareJuergen Gross1-1/+1
set_pmd_at() calls native_set_pmd() unconditionally on x86. This was fine as long as only huge page entries were written via set_pmd_at(), as Xen pv guests don't support those. Commit 2c91bd4a4e2e53 ("mm: speed up mremap by 20x on large regions") introduced a usage of set_pmd_at() possible on pv guests, leading to failures like: BUG: unable to handle kernel paging request at ffff888023e26778 #PF error: [PROT] [WRITE] RIP: e030:move_page_tables+0x7c1/0xae0 move_vma.isra.3+0xd1/0x2d0 __se_sys_mremap+0x3c6/0x5b0 do_syscall_64+0x49/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Make set_pmd_at() paravirt aware by just letting it use set_pmd(). Fixes: 2c91bd4a4e2e53 ("mm: speed up mremap by 20x on large regions") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Cc: sstabellini@kernel.org Cc: hpa@zytor.com Cc: bp@alien8.de Cc: torvalds@linux-foundation.org Link: https://lkml.kernel.org/r/20190210074056.11842-1-jgross@suse.com
2019-02-08MAINTAINERS: Update the ocores i2c bus driver maintainer, etcAndrew Lunn1-0/+2
The listed maintainer has not been responding to emails for a while. Add myself as a second maintainer. Add the platform data include file, which was not listed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-08blk-mq: remove duplicated definition of blk_mq_freeze_queueLiu Bo1-1/+0
As the prototype has been defined in "include/linux/blk-mq.h", the one in "block/blk-mq.h" can be removed then. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-08Blk-iolatency: warn on negative inflight IO counterLiu Bo1-1/+3
This is to catch any unexpected negative value of inflight IO counter. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-08blk-iolatency: fix IO hang due to negative inflight counterLiu Bo1-7/+45
Our test reported the following stack, and vmcore showed that ->inflight counter is -1. [ffffc9003fcc38d0] __schedule at ffffffff8173d95d [ffffc9003fcc3958] schedule at ffffffff8173de26 [ffffc9003fcc3970] io_schedule at ffffffff810bb6b6 [ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb [ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3 [ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a [ffffc9003fcc3b08] generic_make_request at ffffffff81368b49 [ffffc9003fcc3b68] submit_bio at ffffffff81368d7d [ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4] [ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4] [ffffc9003fcc3d68] do_writepages at ffffffff811c49ae [ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188 [ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301 [ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4] [ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b [ffffc9003fcc3ee8] do_fsync at ffffffff81285abd [ffffc9003fcc3f18] sys_fsync at ffffffff81285d50 [ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04 [ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e The ->inflight counter may be negative (-1) if 1) blk-iolatency was disabled when the IO was issued, 2) blk-iolatency was enabled before this IO reached its endio, 3) the ->inflight counter is decreased from 0 to -1 in endio() In fact the hang can be easily reproduced by the below script, H=/sys/fs/cgroup/unified/ P=/sys/fs/cgroup/unified/test echo "+io" > $H/cgroup.subtree_control mkdir -p $P echo $$ > $P/cgroup.procs xfs_io -f -d -c "pwrite 0 4k" /dev/sdg echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency xfs_io -f -d -c "pwrite 0 4k" /dev/sdg This fixes the problem by freezing the queue so that while enabling/disabling iolatency, there is no inflight rq running. Note that quiesce_queue is not needed as this only updating iolatency configuration about which dispatching request_queue doesn't care. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-08MAINTAINERS: unify reference to xen-devel listLukas Bulwahn1-1/+1
In the linux kernel MAINTAINERS file, largely "xen-devel@lists.xenproject.org (moderated for non-subscribers)" is used to refer to the xen-devel mailing list. The DRM DRIVERS FOR XEN section entry mentions xen-devel@lists.xen.org instead, but that is just the same mailing list as the mailing list above. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-02-08x86/mm/cpa: Fix set_mce_nospec()Peter Zijlstra1-25/+25
The recent commit fe0937b24ff5 ("x86/mm/cpa: Fold cpa_flush_range() and cpa_flush_array() into a single cpa_flush() function") accidentally made the call to make_addr_canonical_again() go away, which breaks set_mce_nospec(). Re-instate the call to convert the address back into canonical form right before invoking either CLFLUSH or INVLPG. Rename the function while at it to be shorter (and less MAGA). Fixes: fe0937b24ff5 ("x86/mm/cpa: Fold cpa_flush_range() and cpa_flush_array() into a single cpa_flush() function") Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tony Luck <tony.luck@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Rik van Riel <riel@surriel.com> Link: https://lkml.kernel.org/r/20190208120859.GH32511@hirez.programming.kicks-ass.net
2019-02-08futex: Handle early deadlock return correctlyThomas Gleixner2-15/+50
commit 56222b212e8e ("futex: Drop hb->lock before enqueueing on the rtmutex") changed the locking rules in the futex code so that the hash bucket lock is not longer held while the waiter is enqueued into the rtmutex wait list. This made the lock and the unlock path symmetric, but unfortunately the possible early exit from __rt_mutex_proxy_start() due to a detected deadlock was not updated accordingly. That allows a concurrent unlocker to observe inconsitent state which triggers the warning in the unlock path. futex_lock_pi() futex_unlock_pi() lock(hb->lock) queue(hb_waiter) lock(hb->lock) lock(rtmutex->wait_lock) unlock(hb->lock) // acquired hb->lock hb_waiter = futex_top_waiter() lock(rtmutex->wait_lock) __rt_mutex_proxy_start() ---> fail remove(rtmutex_waiter); ---> returns -EDEADLOCK unlock(rtmutex->wait_lock) // acquired wait_lock wake_futex_pi() rt_mutex_next_owner() --> returns NULL --> WARN lock(hb->lock) unqueue(hb_waiter) The problem is caused by the remove(rtmutex_waiter) in the failure case of __rt_mutex_proxy_start() as this lets the unlocker observe a waiter in the hash bucket but no waiter on the rtmutex, i.e. inconsistent state. The original commit handles this correctly for the other early return cases (timeout, signal) by delaying the removal of the rtmutex waiter until the returning task reacquired the hash bucket lock. Treat the failure case of __rt_mutex_proxy_start() in the same way and let the existing cleanup code handle the eventual handover of the rtmutex gracefully. The regular rt_mutex_proxy_start() gains the rtmutex waiter removal for the failure case, so that the other callsites are still operating correctly. Add proper comments to the code so all these details are fully documented. Thanks to Peter for helping with the analysis and writing the really valuable code comments. Fixes: 56222b212e8e ("futex: Drop hb->lock before enqueueing on the rtmutex") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Stefan Liebler <stli@linux.ibm.com> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1901292311410.1950@nanos.tec.linutronix.de
2019-02-08futex: Fix barrier commentDavidlohr Bueso1-2/+2
The current comment for the barrier that guarantees that waiter increment is always before taking the hb spinlock (barrier (A)) needs to be fixed as it is misplaced. This is obviously referring to hb_waiters_inc, which is a full barrier. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190206185602.949-1-dave@stgolabs.net
2019-02-07net: dsa: b53: Fix for failure when irq is not defined in dtArun Parameswaran1-3/+0
Fixes the issues with non BCM58XX chips in the b53 driver failing, when the irq is not specified in the device tree. Removed the check for BCM58XX in b53_srab_prepare_irq(), so the 'port->irq' will be set to '-EXIO' if the irq is not specified in the device tree. Fixes: 16994374a6fc ("net: dsa: b53: Make SRAB driver manage port interrupts") Fixes: b2ddc48a81b5 ("net: dsa: b53: Do not fail when IRQ are not initialized") Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07blktrace: Show requests without sectorJan Kara1-1/+7
Currently, blktrace will not show requests that don't have any data as rq->__sector is initialized to -1 which is out of device range and thus discarded by act_log_check(). This is most notably the case for cache flush requests sent to the device. Fix the problem by making blk_rq_trace_sector() return 0 for requests without initialized sector. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-07mips: cm: reprime error causeVladimir Kondratiev1-1/+1
Accordingly to the documentation ---cut--- The GCR_ERROR_CAUSE.ERR_TYPE field and the GCR_ERROR_MULT.ERR_TYPE fields can be cleared by either a reset or by writing the current value of GCR_ERROR_CAUSE.ERR_TYPE to the GCR_ERROR_CAUSE.ERR_TYPE register. ---cut--- Do exactly this. Original value of cm_error may be safely written back; it clears error cause and keeps other bits untouched. Fixes: 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors") Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.3+
2019-02-07mips: loongson64: remove unreachable(), fix loongson_poweroff().Yifeng Li1-1/+6
On my Yeeloong 8089, I noticed the machine fails to shutdown properly, and often, the function mach_prepare_reboot() is unexpectedly executed, thus the machine reboots instead. A wait loop is needed to ensure the system is in a well-defined state before going down. In commit 997e93d4df16 ("MIPS: Hang more efficiently on halt/powerdown/restart"), a general superset of the wait loop for all platforms is already provided, so we don't need to implement our own. This commit simply removes the unreachable() compiler marco after mach_prepare_reboot(), thus allowing the execution of machine_hang(). My test shows that the machine is now able to shutdown successfully. Please note that there are two different bugs preventing the machine from shutting down, another work-in-progress commit is needed to fix a lockup in cpufreq / i8259 driver, please read Reference, this commit does not fix that bug. Reference: https://lkml.org/lkml/2019/2/5/908 Signed-off-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org # v4.17+
2019-02-07sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()Hangbin Liu1-1/+2
If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07geneve: should not call rt6_lookup() when ipv6 was disabledHangbin Liu1-3/+7
When we add a new GENEVE device with IPv6 remote, checking only for IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the kernel command line (ipv6.disable=1), and calling rt6_lookup() would cause a NULL pointer dereference. v2: - don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet) - there's no need to use in6_dev_get() as we only need to check that idev exists (reported by David Ahern). This is under RTNL, so we can simply use __in6_dev_get() instead (Stefano, Eric). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: c40e89fd358e9 ("geneve: configure MTU based on a lower device") Cc: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)Peter Shier1-0/+1
Bugzilla: 1671904 There are multiple code paths where an hrtimer may have been started to emulate an L1 VMX preemption timer that can result in a call to free_nested without an intervening L2 exit where the hrtimer is normally cancelled. Unconditionally cancel in free_nested to cover all cases. Embargoed until Feb 7th 2019. Signed-off-by: Peter Shier <pshier@google.com> Reported-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reported-by: Felix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Message-Id: <20181011184646.154065-1-pshier@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-07KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)Paolo Bonzini1-0/+7
Bugzilla: 1671930 Emulation of certain instructions (VMXON, VMCLEAR, VMPTRLD, VMWRITE with memory operand, INVEPT, INVVPID) can incorrectly inject a page fault when passed an operand that points to an MMIO address. The page fault will use uninitialized kernel stack memory as the CR2 and error code. The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR exit to userspace; however, it is not an easy fix, so for now just ensure that the error code and CR2 are zero. Embargoed until Feb 7th 2019. Reported-by: Felix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-07kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)Jann Horn1-1/+2
kvm_ioctl_create_device() does the following: 1. creates a device that holds a reference to the VM object (with a borrowed reference, the VM's refcount has not been bumped yet) 2. initializes the device 3. transfers the reference to the device to the caller's file descriptor table 4. calls kvm_get_kvm() to turn the borrowed reference to the VM into a real reference The ownership transfer in step 3 must not happen before the reference to the VM becomes a proper, non-borrowed reference, which only happens in step 4. After step 3, an attacker can close the file descriptor and drop the borrowed reference, which can cause the refcount of the kvm object to drop to zero. This means that we need to grab a reference for the device before anon_inode_getfd(), otherwise the VM can disappear from under us. Fixes: 852b6d57dc7f ("kvm: add device control API") Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-07signal: Better detection of synchronous signalsEric W. Biederman1-1/+51
Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. When the stack overflows delivery of SIGHUP fails and force_sigsegv is called. Unfortunately because SIGSEGV is numerically higher than SIGHUP next_signal tries again to deliver a SIGHUP. From a quality of implementation standpoint attempting to deliver the timer SIGHUP signal is wrong. We should attempt to deliver the synchronous SIGSEGV signal we just forced. We can make that happening in a fairly straight forward manner by instead of just looking at the signal number we also look at the si_code. In particular for exceptions (aka synchronous signals) the si_code is always greater than 0. That still has the potential to pick up a number of asynchronous signals as in a few cases the same si_codes that are used for synchronous signals are also used for asynchronous signals, and SI_KERNEL is also included in the list of possible si_codes. Still the heuristic is much better and timer signals are definitely excluded. Which is enough to prevent all known ways for someone sending a process signals fast enough to cause unexpected and arguably incorrect behavior. Cc: stable@vger.kernel.org Fixes: a27341cd5fcb ("Prioritize synchronous signals over 'normal' signals") Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07signal: Always notice exiting tasksEric W. Biederman1-0/+6
Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07ACPI: Set debug output flags independent of ACPICAErik Schmauss1-0/+3
There was a divergence between Linux and ACPICA on the definition of ACPI_DEBUG_DEFAULT. This divergence was solved by taking ACPICA's definition in 4c1379d7bb42. After resolving the divergence, it was clear that Linux users wanted to use their old set of debug flags. This change fixes the divergence by setting these debug flags during acpi_early_init() rather than during global variable initialization in acpixf.h (owned by ACPICA). Fixes: 4c1379d7bb42 ("ACPICA: Debug output: Add option to display method/object evaluation") Reported-by: Michael J Ruhl <michael.j.ruhl@intel.com> Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-06net: Don't default Cavium PTP driver to 'y'Bjorn Helgaas1-1/+0
8c56df372bc1 ("net: add support for Cavium PTP coprocessor") added the Cavium PTP coprocessor driver and enabled it by default. Remove the "default y" because the driver only applies to Cavium ThunderX processors. Fixes: 8c56df372bc1 ("net: add support for Cavium PTP coprocessor") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in sbdma_tx_process() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in velocity_free_tx_buf() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in bdx_tx_cleanup() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei3-3/+3
dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in hdlc_tx_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in mpc52xx_fec_tx_interrupt() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in epic_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in dscc4_tx_irq() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in de_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in dfx_xmt_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net/mlx5e: Don't overwrite pedit action when multiple pedit usedTonghao Zhang1-10/+15
In some case, we may use multiple pedit actions to modify packets. The command shown as below: the last pedit action is effective. $ tc filter add dev netdev_rep parent ffff: protocol ip prio 1 \ flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \ action pedit ex munge ip dst set 192.168.1.100 pipe \ action pedit ex munge eth src set 00:00:00:00:00:01 pipe \ action pedit ex munge eth dst set 00:00:00:00:00:02 pipe \ action csum ip pipe \ action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \ action mirred egress redirect dev vxlan0 To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction, max_mod_hdr_actions will store the max pedit action number we support and num_mod_hdr_actions indicates how many pedit action we used, and store all pedit action to mod_hdr_actions. Fixes: d79b6df6b10a ("net/mlx5e: Add parsing of TC pedit actions to HW format") Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net/mlx5e: Update hw flows when encap source mac changedTonghao Zhang3-0/+7
When we offload tc filters to hardware, hardware flows can be updated when mac of encap destination ip is changed. But we ignore one case, that the mac of local encap ip can be changed too, so we should also update them. To fix it, add route_dev in mlx5e_encap_entry struct to save the local encap netdevice, and when mac changed, kernel will flush all the neighbour on the netdevice and send NETEVENT_NEIGH_UPDATE event. The mlx5 driver will delete the flows and add them when neighbour available again. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Cc: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06qed*: Advance drivers version to 8.37.0.20Manish Chopra2-2/+2
Version update for qed/qede modules. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.