| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The system might hang with the following backtrace:
schedule+0x80/0x100
schedule_timeout+0x48/0x138
wait_for_common+0xa4/0x134
wait_for_completion+0x1c/0x2c
kthread_flush_work+0x114/0x1cc
kthread_cancel_work_sync.llvm.16514401384283632983+0xe8/0x144
kthread_cancel_delayed_work_sync+0x18/0x2c
xxxx_pm_notify+0xb0/0xd8
blocking_notifier_call_chain_robust+0x80/0x194
pm_notifier_call_chain_robust+0x28/0x4c
suspend_prepare+0x40/0x260
enter_state+0x80/0x3f4
pm_suspend+0x60/0xdc
state_store+0x108/0x144
kobj_attr_store+0x38/0x88
sysfs_kf_write+0x64/0xc0
kernfs_fop_write_iter+0x108/0x1d0
vfs_write+0x2f4/0x368
ksys_write+0x7c/0xec
It is caused by the following race between kthread_mod_delayed_work()
and kthread_cancel_delayed_work_sync():
CPU0 CPU1
Context: Thread A Context: Thread B
kthread_mod_delayed_work()
spin_lock()
__kthread_cancel_work()
spin_unlock()
del_timer_sync()
kthread_cancel_delayed_work_sync()
spin_lock()
__kthread_cancel_work()
spin_unlock()
del_timer_sync()
spin_lock()
work->canceling++
spin_unlock
spin_lock()
queue_delayed_work()
// dwork is put into the worker->delayed_work_list
spin_unlock()
kthread_flush_work()
// flush_work is put at the tail of the dwork
wait_for_completion()
Context: IRQ
kthread_delayed_work_timer_fn()
spin_lock()
list_del_init(&work->node);
spin_unlock()
BANG: flush_work is not longer linked and will never get proceed.
The problem is that kthread_mod_delayed_work() checks work->canceling
flag before canceling the timer.
A simple solution is to (re)check work->canceling after
__kthread_cancel_work(). But then it is not clear what should be
returned when __kthread_cancel_work() removed the work from the queue
(list) and it can't queue it again with the new @delay.
The return value might be used for reference counting. The caller has
to know whether a new work has been queued or an existing one was
replaced.
The proper solution is that kthread_mod_delayed_work() will remove the
work from the queue (list) _only_ when work->canceling is not set. The
flag must be checked after the timer is stopped and the remaining
operations can be done under worker->lock.
Note that kthread_mod_delayed_work() could remove the timer and then
bail out. It is fine. The other canceling caller needs to cancel the
timer as well. The important thing is that the queue (list)
manipulation is done atomically under worker->lock.
Link: https://lkml.kernel.org/r/20210610133051.15337-3-pmladek@suse.com
Fixes: 9a6b06c8d9a220860468a ("kthread: allow to modify delayed kthread work")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Martin Liu <liumartin@google.com>
Cc: <jenhaochen@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "kthread_worker: Fix race between kthread_mod_delayed_work()
and kthread_cancel_delayed_work_sync()".
This patchset fixes the race between kthread_mod_delayed_work() and
kthread_cancel_delayed_work_sync() including proper return value
handling.
This patch (of 2):
Simple code refactoring as a preparation step for fixing a race between
kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync().
It does not modify the existing behavior.
Link: https://lkml.kernel.org/r/20210610133051.15337-2-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: <jenhaochen@google.com>
Cc: Martin Liu <liumartin@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit 121e6f3258fe ("mm/vmalloc: hugepage vmalloc mappings"),
__vmalloc_node_range was changed such that __get_vm_area_node was no
longer called with the requested/real size of the vmalloc allocation,
but rather with a rounded-up size.
This means that __get_vm_area_node called kasan_unpoision_vmalloc() with
a rounded up size rather than the real size. This led to it allowing
access to too much memory and so missing vmalloc OOBs and failing the
kasan kunit tests.
Pass the real size and the desired shift into __get_vm_area_node. This
allows it to round up the size for the underlying allocators while still
unpoisioning the correct quantity of shadow memory.
Adjust the other call-sites to pass in PAGE_SHIFT for the shift value.
Link: https://lkml.kernel.org/r/20210617081330.98629-1-dja@axtens.net
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213335
Fixes: 121e6f3258fe ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Create Secure Configuration Ultravisor Call does not support using
large pages for the virtual memory area. This is a hardware limitation.
This patch replaces the vzalloc call with an almost equivalent call to
the newly introduced vmalloc_no_huge function, which guarantees that
only small pages will be used for the backing.
The new call will not clear the allocated memory, but that has never
been an actual requirement.
Link: https://lkml.kernel.org/r/20210614132357.10202-3-imbrenda@linux.ibm.com
Fixes: 121e6f3258fe3 ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: add vmalloc_no_huge and use it", v4.
Add vmalloc_no_huge() and export it, so modules can allocate memory with
small pages.
Use the newly added vmalloc_no_huge() in KVM on s390 to get around a
hardware limitation.
This patch (of 2):
Commit 121e6f3258fe3 ("mm/vmalloc: hugepage vmalloc mappings") added
support for hugepage vmalloc mappings, it also added the flag
VM_NO_HUGE_VMAP for __vmalloc_node_range to request the allocation to be
performed with 0-order non-huge pages.
This flag is not accessible when calling vmalloc, the only option is to
call directly __vmalloc_node_range, which is not exported.
This means that a module can't vmalloc memory with small pages.
Case in point: KVM on s390x needs to vmalloc a large area, and it needs
to be mapped with non-huge pages, because of a hardware limitation.
This patch adds the function vmalloc_no_huge, which works like vmalloc,
but it is guaranteed to always back the mapping using small pages. This
new function is exported, therefore it is usable by modules.
[akpm@linux-foundation.org: whitespace fixes, per Christoph]
Link: https://lkml.kernel.org/r/20210614132357.10202-1-imbrenda@linux.ibm.com
Link: https://lkml.kernel.org/r/20210614132357.10202-2-imbrenda@linux.ibm.com
Fixes: 121e6f3258fe3 ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
My local syzbot instance hit memory leak in nilfs2. The problem was in
missing kobject_put() in nilfs_sysfs_delete_device_group().
kobject_del() does not call kobject_cleanup() for passed kobject and it
leads to leaking duped kobject name if kobject_put() was not called.
Fail log:
BUG: memory leak
unreferenced object 0xffff8880596171e0 (size 8):
comm "syz-executor379", pid 8381, jiffies 4294980258 (age 21.100s)
hex dump (first 8 bytes):
6c 6f 6f 70 30 00 00 00 loop0...
backtrace:
kstrdup+0x36/0x70 mm/util.c:60
kstrdup_const+0x53/0x80 mm/util.c:83
kvasprintf_const+0x108/0x190 lib/kasprintf.c:48
kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289
kobject_add_varg lib/kobject.c:384 [inline]
kobject_init_and_add+0xc9/0x160 lib/kobject.c:473
nilfs_sysfs_create_device_group+0x150/0x800 fs/nilfs2/sysfs.c:999
init_nilfs+0xe26/0x12b0 fs/nilfs2/the_nilfs.c:637
Link: https://lkml.kernel.org/r/20210612140559.20022-1-paskripkin@gmail.com
Fixes: da7141fb78db ("nilfs2: add /sys/fs/nilfs2/<device> group")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Aha! Shouldn't that quick scan over pte_none()s make sure that it holds
ptlock in the PVMW_SYNC case? That too might have been responsible for
BUGs or WARNs in split_huge_page_to_list() or its unmap_page(), though
I've never seen any.
Link: https://lkml.kernel.org/r/1bdf384c-8137-a149-2a1e-475a4791c3c@google.com
Link: https://lore.kernel.org/linux-mm/20210412180659.B9E3.409509F4@e16-tech.com/
Fixes: ace71a19cec5 ("mm: introduce page_vma_mapped_walk()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Running certain tests with a DEBUG_VM kernel would crash within hours,
on the total_mapcount BUG() in split_huge_page_to_list(), while trying
to free up some memory by punching a hole in a shmem huge page: split's
try_to_unmap() was unable to find all the mappings of the page (which,
on a !DEBUG_VM kernel, would then keep the huge page pinned in memory).
Crash dumps showed two tail pages of a shmem huge page remained mapped
by pte: ptes in a non-huge-aligned vma of a gVisor process, at the end
of a long unmapped range; and no page table had yet been allocated for
the head of the huge page to be mapped into.
Although designed to handle these odd misaligned huge-page-mapped-by-pte
cases, page_vma_mapped_walk() falls short by returning false prematurely
when !pmd_present or !pud_present or !p4d_present or !pgd_present: there
are cases when a huge page may span the boundary, with ptes present in
the next.
Restructure page_vma_mapped_walk() as a loop to continue in these cases,
while keeping its layout much as before. Add a step_forward() helper to
advance pvmw->address across those boundaries: originally I tried to use
mm's standard p?d_addr_end() macros, but hit the same crash 512 times
less often: because of the way redundant levels are folded together, but
folded differently in different configurations, it was just too
difficult to use them correctly; and step_forward() is simpler anyway.
Link: https://lkml.kernel.org/r/fedb8632-1798-de42-f39e-873551d5bc81@google.com
Fixes: ace71a19cec5 ("mm: introduce page_vma_mapped_walk()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page_vma_mapped_walk() cleanup: get THP's vma_address_end() at the
start, rather than later at next_pte.
It's a little unnecessary overhead on the first call, but makes for a
simpler loop in the following commit.
Link: https://lkml.kernel.org/r/4542b34d-862f-7cb4-bb22-e0df6ce830a2@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page_vma_mapped_walk() cleanup: add a label this_pte, matching next_pte,
and use "goto this_pte", in place of the "while (1)" loop at the end.
Link: https://lkml.kernel.org/r/a52b234a-851-3616-2525-f42736e8934@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page_vma_mapped_walk() cleanup: add a level of indentation to much of
the body, making no functional change in this commit, but reducing the
later diff when this is all converted to a loop.
[hughd@google.com: : page_vma_mapped_walk(): add a level of indentation fix]
Link: https://lkml.kernel.org/r/7f817555-3ce1-c785-e438-87d8efdcaf26@google.com
Link: https://lkml.kernel.org/r/efde211-f3e2-fe54-977-ef481419e7f3@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page_vma_mapped_walk() cleanup: adjust the test for crossing page table
boundary - I believe pvmw->address is always page-aligned, but nothing
else here assumed that; and remember to reset pvmw->pte to NULL after
unmapping the page table, though I never saw any bug from that.
Link: https://lkml.kernel.org/r/799b3f9c-2a9e-dfef-5d89-26e9f76fd97@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page_vma_mapped_walk() cleanup: rearrange the !pmd_present() block to
follow the same "return not_found, return not_found, return true"
pattern as the block above it (note: returning not_found there is never
premature, since existence or prior existence of huge pmd guarantees
good alignment).
Link: https://lkml.kernel.org/r/378c8650-1488-2edf-9647-32a53cf2e21@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page_vma_mapped_walk() cleanup: re-evaluate pmde after taking lock, then
use it in subsequent tests, instead of repeatedly dereferencing pointer.
Link: https://lkml.kernel.org/r/53fbc9d-891e-46b2-cb4b-468c3b19238e@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page_vma_mapped_walk() cleanup: get the hugetlbfs PageHuge case out of
the way at the start, so no need to worry about it later.
Link: https://lkml.kernel.org/r/e31a483c-6d73-a6bb-26c5-43c3b880a2@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: page_vma_mapped_walk() cleanup and THP fixes".
I've marked all of these for stable: many are merely cleanups, but I
think they are much better before the main fix than after.
This patch (of 11):
page_vma_mapped_walk() cleanup: sometimes the local copy of pvwm->page
was used, sometimes pvmw->page itself: use the local copy "page"
throughout.
Link: https://lkml.kernel.org/r/589b358c-febc-c88e-d4c2-7834b37fa7bf@google.com
Link: https://lkml.kernel.org/r/88e67645-f467-c279-bf5e-af4b5c6b13eb@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
XRSTORS requires a valid xstate buffer to work correctly. XSAVES does not
guarantee to write a fully valid buffer according to the SDM:
"XSAVES does not write to any parts of the XSAVE header other than the
XSTATE_BV and XCOMP_BV fields."
XRSTORS triggers a #GP:
"If bytes 63:16 of the XSAVE header are not all zero."
It's dubious at best how this can work at all when the buffer is not zeroed
before use.
Allocate the buffers with __GFP_ZERO to prevent XRSTORS failure.
Fixes: ce711ea3cab9 ("perf/x86/intel/lbr: Support XSAVES/XRSTORS for LBR context switch")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/87wnr0wo2z.ffs@nanos.tec.linutronix.de
|
|
Irrespective as to whether CONFIG_MODULE_SIG is configured, specifying
"module.sig_enforce=1" on the boot command line sets "sig_enforce".
Only allow "sig_enforce" to be set when CONFIG_MODULE_SIG is configured.
This patch makes the presence of /sys/module/module/parameters/sig_enforce
dependent on CONFIG_MODULE_SIG=y.
Fixes: fda784e50aac ("module: export module signature enforcement status")
Reported-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Revert commit 4514d991d992 ("PCI: PM: Do not read power state in
pci_enable_device_flags()") that is reported to cause PCI device
initialization issues on some systems.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213481
Link: https://lore.kernel.org/linux-acpi/YNDoGICcg0V8HhpQ@eldamar.lan
Reported-by: Michael <phyre@rogers.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Fixes: 4514d991d992 ("PCI: PM: Do not read power state in pci_enable_device_flags()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
syzbot reported a memory leak related to sigqueue caching.
The assumption that a task cannot cache a sigqueue after the signal handler
has been dropped and exit_task_sigqueue_cache() has been invoked turns out
to be wrong.
Such a task can still invoke release_task(other_task), which cleans up the
signals of 'other_task' and ends up in sigqueue_cache_or_free(), which in
turn will cache the signal because task->sigqueue_cache is NULL. That's
obviously bogus because nothing will free the cached signal of that task
anymore, so the cached item is leaked.
This happens when e.g. the last non-leader thread exits and reaps the
zombie leader.
Prevent this by setting tsk::sigqueue_cache to an error pointer value in
exit_task_sigqueue_cache() which forces any subsequent invocation of
sigqueue_cache_or_free() from that task to hand the sigqueue back to the
kmemcache.
Add comments to all relevant places.
Fixes: 4bad58ebc8bc ("signal: Allow tasks to cache one sigqueue struct")
Reported-by: syzbot+0bac5fec63d4f399ba98@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/878s32g6j5.ffs@nanos.tec.linutronix.de
|
|
Ensure that a CFS parent will be in the list whenever one of its children is also
in the list.
A warning on rq->tmp_alone_branch != &rq->leaf_cfs_rq_list has been
reported while running LTP test cfs_bandwidth01.
Odin Ugedal found the root cause:
$ tree /sys/fs/cgroup/ltp/ -d --charset=ascii
/sys/fs/cgroup/ltp/
|-- drain
`-- test-6851
`-- level2
|-- level3a
| |-- worker1
| `-- worker2
`-- level3b
`-- worker3
Timeline (ish):
- worker3 gets throttled
- level3b is decayed, since it has no more load
- level2 get throttled
- worker3 get unthrottled
- level2 get unthrottled
- worker3 is added to list
- level3b is not added to list, since nr_running==0 and is decayed
[ Vincent Guittot: Rebased and updated to fix for the reported warning. ]
Fixes: a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Acked-by: Odin Ugedal <odin@uged.al>
Link: https://lore.kernel.org/r/20210621174330.11258-1-vincent.guittot@linaro.org
|
|
Better handle the failure paths.
vmlinux.o: warning: objtool: debug_locks_off()+0x23: call to console_verbose() leaves .noinstr.text section
vmlinux.o: warning: objtool: debug_locks_off()+0x19: call to __kasan_check_write() leaves .noinstr.text section
debug_locks_off+0x19/0x40:
instrument_atomic_write at include/linux/instrumented.h:86
(inlined by) __debug_locks_off at include/linux/debug_locks.h:17
(inlined by) debug_locks_off at lib/debug_locks.c:41
Fixes: 6eebad1ad303 ("lockdep: __always_inline more for noinstr")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210621120120.784404944@infradead.org
|
|
Fix:
vmlinux.o: warning: objtool: handle_bug()+0x10: call to task_size_max() leaves .noinstr.text section
When #UD isn't a BUG, we shouldn't violate noinstr (we'll still
probably die, but that's another story).
Fixes: 025768a966a3 ("x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210621120120.682468274@infradead.org
|
|
Fix:
vmlinux.o: warning: objtool: exc_xen_unknown_trap()+0x7: call to printk() leaves .noinstr.text section
Fixes: 2e92493637a0 ("x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210621120120.606560778@infradead.org
|
|
Fix:
vmlinux.o: warning: objtool: xen_pv_evtchn_do_upcall()+0x23: call to irq_enter_rcu() leaves .noinstr.text section
Fixes: 359f01d1816f ("x86/entry: Use run_sysvec_on_irqstack_cond() for XEN upcall")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210621120120.532960208@infradead.org
|
|
Fix:
vmlinux.o: warning: objtool: __do_fast_syscall_32()+0xf5: call to trace_hardirqs_off() leaves .noinstr.text section
Fixes: 5d5675df792f ("x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210621120120.467898710@infradead.org
|
|
Because the __x86_indirect_alt* symbols are just that, objtool will
try and validate them as regular symbols, instead of the alternative
replacements that they are.
This goes sideways for FRAME_POINTER=y builds; which generate a fair
amount of warnings.
Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YNCgxwLBiK9wclYJ@hirez.programming.kicks-ass.net
|
|
in case of driver wants to sync part of ranges with offset,
swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with
offset and ends up with data mismatch.
It was removed from
"swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single",
but said logic has to be added back in.
From Linus's email:
"That commit which the removed the offset calculation entirely, because the old
(unsigned long)tlb_addr & (IO_TLB_SIZE - 1)
was wrong, but instead of removing it, I think it should have just
fixed it to be
(tlb_addr - mem->start) & (IO_TLB_SIZE - 1);
instead. That way the slot offset always matches the slot index calculation."
(Unfortunatly that broke NVMe).
The use-case that drivers are hitting is as follow:
1. Get dma_addr_t from dma_map_single()
dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE);
|<---------------vsize------------->|
+-----------------------------------+
| | original buffer
+-----------------------------------+
vaddr
swiotlb_align_offset
|<----->|<---------------vsize------------->|
+-------+-----------------------------------+
| | | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
2. Do something
3. Sync dma_addr_t through dma_sync_single_for_device(..)
dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE);
Error case.
Copy data to original buffer but it is from base addr (instead of
base addr + offset) in original buffer:
swiotlb_align_offset
|<----->|<- offset ->|<- size ->|
+-------+-----------------------------------+
| | |##########| | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
|<- size ->|
+-----------------------------------+
|##########| | original buffer
+-----------------------------------+
vaddr
The fix is to copy the data to the original buffer and take into
account the offset, like so:
swiotlb_align_offset
|<----->|<- offset ->|<- size ->|
+-------+-----------------------------------+
| | |##########| | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
|<- offset ->|<- size ->|
+-----------------------------------+
| |##########| | original buffer
+-----------------------------------+
vaddr
[One fix which was Linus's that made more sense to as it created a
symmetry would break NVMe. The reason for that is the:
unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1);
would come up with the proper offset, but it would lose the
alignment (which this patch contains).]
Fixes: 16fc3cef33a0 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single")
Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
CC: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
|
|
To pick the changes in:
321827477360934d ("icmp: don't send out ICMP messages with a source address of 0.0.0.0")
That don't result in any change in tooling, as INADDR_ are not used to
generate id->string tables used by 'perf trace'.
This addresses this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <davem@davemloft.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
8b1462b67f23da54 ("quota: finish disable quotactl_path syscall")
Those headers are used in some arches to generate the syscall table used
in 'perf trace' to translate syscall numbers into strings.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Jan Kara <jack@suse.cz>
Cc: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
ea6932d70e223e02 ("net: make get_net_ns return error if NET_NS is disabled")
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: Changbin Du <changbin.du@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
$(( .. )) is a bash feature but the test's interpreter is !/bin/sh,
switch the code to use expr.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210617184216.2075588-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ASan reported a memory leak of BPF-related ksymbols map and dso. The
leak is caused by refount never reaching 0, due to missing __put calls
in the function machine__process_ksymbol_register.
Once the dso is inserted in the map, dso__put() should be called
(map__new2() increases the refcount to 2).
The same thing applies for the map when it's inserted into maps
(maps__insert() increases the refcount to 2).
$ sudo ./perf record -- sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]
=================================================================
==297735==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 6992 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x8e4e53 in map__new2 /home/user/linux/tools/perf/util/map.c:216:20
#2 0x8cf68c in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:778:10
[...]
Indirect leak of 8702 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x8728d7 in dso__new_id /home/user/linux/tools/perf/util/dso.c:1256:20
#2 0x872015 in dso__new /home/user/linux/tools/perf/util/dso.c:1295:9
#3 0x8cf623 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:774:21
[...]
Indirect leak of 1520 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
#2 0x888954 in map__process_kallsym_symbol /home/user/linux/tools/perf/util/symbol.c:710:8
[...]
Indirect leak of 1406 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
#2 0x8cfbd8 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:803:8
[...]
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lore.kernel.org/lkml/20210612173751.188582-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The error code is not set at all in the sys event iter function.
This may lead to an uninitialized value of "ret" in
metricgroup__add_metric() when no CPU metric is added.
Fix by properly setting the error code.
It is not necessary to init "ret" to 0 in metricgroup__add_metric(), as
if we have no CPU or sys event metric matching, then "has_match" should
be 0 and "ret" is set to -EINVAL.
However gcc cannot detect that it may not have been set after the
map_for_each_metric() loop for CPU metrics, which is strange.
Fixes: be335ec28efa8 ("perf metricgroup: Support adding metrics for system PMUs")
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1623335580-187317-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following command segfaults on my x86 broadwell:
$ ./perf stat -M frontend_bound,retiring,backend_bound,bad_speculation sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { raw 0x10e }
anon group { raw 0x10e }
perf: util/evsel.c:1596: get_group_fd: Assertion `!(!leader->core.fd)' failed.
Aborted (core dumped)
The issue shows itself as a use-after-free in evlist__check_cpu_maps(),
whereby the leader of an event selector (evsel) has been deleted (yet we
still attempt to verify for an evsel).
Fundamentally the problem comes from metricgroup__setup_events() ->
find_evsel_group(), and has developed from the previous fix attempt in
commit 9c880c24cb0d ("perf metricgroup: Fix for metrics containing
duration_time").
The problem now is that the logic in checking if an evsel is in the same
group is subtly broken for the "cycles" event. For the "cycles" event,
the pmu_name is NULL; however the logic in find_evsel_group() may set an
event matched against "cycles" as used, when it should not be.
This leads to a condition where an evsel is set, yet its leader is not.
Fix the check for evsel pmu_name by not matching evsels when either has a
NULL pmu_name.
There is still a pre-existing metric issue whereby the ordering of the
metrics may break the 'stat' function, as discussed at:
https://lore.kernel.org/lkml/49c6fccb-b716-1bf0-18a6-cace1cdb66b9@huawei.com/
Fixes: 9c880c24cb0d ("perf metricgroup: Fix for metrics containing duration_time")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> # On a Thinkpad T450S
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1623335580-187317-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The order of interrupt numbers is incorrect.
The order for FU740 is: DirError, DataError, DataFail, DirFail
From SiFive FU740-C000 Manual:
19 - L2 Cache DirError
20 - L2 Cache DirFail
21 - L2 Cache DataError
22 - L2 Cache DataFail
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Andreas reported commit fc8504765ec5 ("riscv: bpf: Avoid breaking W^X")
breaks booting with one kind of defconfig, I reproduced a kernel panic
with the defconfig:
[ 0.138553] Unable to handle kernel paging request at virtual address ffffffff81201220
[ 0.139159] Oops [#1]
[ 0.139303] Modules linked in:
[ 0.139601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5-default+ #1
[ 0.139934] Hardware name: riscv-virtio,qemu (DT)
[ 0.140193] epc : __memset+0xc4/0xfc
[ 0.140416] ra : skb_flow_dissector_init+0x1e/0x82
[ 0.140609] epc : ffffffff8029806c ra : ffffffff8033be78 sp : ffffffe001647da0
[ 0.140878] gp : ffffffff81134b08 tp : ffffffe001654380 t0 : ffffffff81201158
[ 0.141156] t1 : 0000000000000002 t2 : 0000000000000154 s0 : ffffffe001647dd0
[ 0.141424] s1 : ffffffff80a43250 a0 : ffffffff81201220 a1 : 0000000000000000
[ 0.141654] a2 : 000000000000003c a3 : ffffffff81201258 a4 : 0000000000000064
[ 0.141893] a5 : ffffffff8029806c a6 : 0000000000000040 a7 : ffffffffffffffff
[ 0.142126] s2 : ffffffff81201220 s3 : 0000000000000009 s4 : ffffffff81135088
[ 0.142353] s5 : ffffffff81135038 s6 : ffffffff8080ce80 s7 : ffffffff80800438
[ 0.142584] s8 : ffffffff80bc6578 s9 : 0000000000000008 s10: ffffffff806000ac
[ 0.142810] s11: 0000000000000000 t3 : fffffffffffffffc t4 : 0000000000000000
[ 0.143042] t5 : 0000000000000155 t6 : 00000000000003ff
[ 0.143220] status: 0000000000000120 badaddr: ffffffff81201220 cause: 000000000000000f
[ 0.143560] [<ffffffff8029806c>] __memset+0xc4/0xfc
[ 0.143859] [<ffffffff8061e984>] init_default_flow_dissectors+0x22/0x60
[ 0.144092] [<ffffffff800010fc>] do_one_initcall+0x3e/0x168
[ 0.144278] [<ffffffff80600df0>] kernel_init_freeable+0x1c8/0x224
[ 0.144479] [<ffffffff804868a8>] kernel_init+0x12/0x110
[ 0.144658] [<ffffffff800022de>] ret_from_exception+0x0/0xc
[ 0.145124] ---[ end trace f1e9643daa46d591 ]---
After some investigation, I think I found the root cause: commit
2bfc6cd81bd ("move kernel mapping outside of linear mapping") moves
BPF JIT region after the kernel:
| #define BPF_JIT_REGION_START PFN_ALIGN((unsigned long)&_end)
The &_end is unlikely aligned with PMD size, so the front bpf jit
region sits with part of kernel .data section in one PMD size mapping.
But kernel is mapped in PMD SIZE, when bpf_jit_binary_lock_ro() is
called to make the first bpf jit prog ROX, we will make part of kernel
.data section RO too, so when we write to, for example memset the
.data section, MMU will trigger a store page fault.
To fix the issue, we need to ensure the BPF JIT region is PMD size
aligned. This patch acchieve this goal by restoring the BPF JIT region
to original position, I.E the 128MB before kernel .text section. The
modification to kasan_init.c is inspired by Alexandre.
Fixes: fc8504765ec5 ("riscv: bpf: Avoid breaking W^X")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
commit 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear
mapping") makes use of MODULES_VADDR to populate kernel, BPF, modules
mapping. Currently, MODULES_VADDR is defined as below for RV64:
| #define MODULES_VADDR (PFN_ALIGN((unsigned long)&_end) - SZ_2G)
But kasan_init() has two local variables which are also named as _start,
_end, so MODULES_VADDR is evaluated with the local variable _end
rather than the global "_end" as we expected. Fix this issue by
renaming the two local variables.
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
If a task is killed during a page fault, it does not currently call
sb_end_pagefault(), which means that the filesystem cannot be frozen
at any time thereafter. This may be reported by lockdep like this:
====================================
WARNING: fsstress/10757 still has locks held!
5.13.0-rc4-build4+ #91 Not tainted
------------------------------------
1 lock held by fsstress/10757:
#0: ffff888104eac530
(
sb_pagefaults
as filesystem freezing is modelled as a lock.
Fix this by removing all the direct returns from within the function,
and using 'ret' to indicate whether we were interrupted or successful.
Fixes: 1cf7a1518aef ("afs: Implement shared-writeable mmap")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20210616154900.1958373-1-willy@infradead.org/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
static void ec_bhf_remove(struct pci_dev *dev)
{
...
struct ec_bhf_priv *priv = netdev_priv(net_dev);
unregister_netdev(net_dev);
free_netdev(net_dev);
pci_iounmap(dev, priv->dma_io);
pci_iounmap(dev, priv->io);
...
}
priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after pci_iounmap()
calls.
Fixes: 6af55ff52b02 ("Driver for Beckhoff CX5020 EtherCAT master module.")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Petr Mladek
Daniel Axtens
Claudio Imbrenda
Pavel Skripkin
Hugh Dickins
Thomas Gleixner
Mimi Zohar
Rafael J. Wysocki
Rik van Riel
Peter Zijlstra
Bumyong Lee
Linus Torvalds
Arnaldo Carvalho de Melo
Ian Rogers
Riccardo Mancini
John Garry
David Abdurachmanov
Jisheng Zhang
Matthew Wilcox (Oracle)