aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-25drm: rcar-du: Cache DSYSR value to ensure known initial valueLaurent Pinchart3-11/+17
DSYSR is a DU channel register that also contains group fields. It is thus written to by both the group and CRTC code, using read-update-write sequences. As the register isn't initialized explicitly at startup time, this can lead to invalid or otherwise unexpected values being written to some of the fields if they have been modified by the firmware or just not reset properly. To fix this we can write a fully known value to the DSYSR register when turning a channel's functional clock on. However, the mix of group and channel fields complicate this. A simpler solution is to cache the register and initialize the cached value to the desired hardware defaults. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-09-25drm: rcar-du: Enable configurable DPAD0 routing on Gen3Laurent Pinchart2-11/+18
All Gen3 SoCs supported so far have a fixed association between DPAD0 and DU channels, which led to hardcoding that association when writing the corresponding hardware register. The D3 and E3 will break that mechanism as DPAD0 can be dynamically connected to either DU0 or DU1. Make DPAD0 routing dynamic on Gen3. To ensure a valid hardware configuration when the DU starts without the RGB output enabled, DPAD0 is associated at initialization time to the first DU channel that it can be connected to. This makes no change on Gen2 as all Gen2 SoCs can connected DPAD0 to DU0, which is the current implicit default value. As the DPAD0 source is always 0 when a single source is possible on Gen2, we can also simplify the Gen2 code in the same function to remove a conditional check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-09-25drm: rcar-du: Use LVDS PLL clock as dot clock when possibleLaurent Pinchart3-15/+59
On selected SoCs, the DU can use the clock output by the LVDS encoder PLL as its input dot clock. This feature is optional, but on the D3 and E3 SoC it is often the only way to obtain a precise dot clock frequency, as the other available clocks (CPG-generated clock and external clock) usually have fixed rates. Add a DU model information field to describe which DU channels can use the LVDS PLL output clock as their input clock, and configure clock routing accordingly. This feature is available on H2, M2-W, M2-N, D3 and E3 SoCs, with D3 and E3 being the primary targets. It is left disabled in this commit, and will be enabled per-SoC after careful testing. At the hardware level, clock routing is configured at runtime in two steps, first selecting an internal dot clock between the LVDS PLL clock and the external DOTCLKIN clock, and then selecting between the internal dot clock and the CPG-generated clock. The first part requires stopping the whole DU group in order for the change to take effect, thus causing flickering on the screen. For this reason we currently hardcode the clock source to the LVDS PLL clock if available, and allow flicker-free selection of the external DOTCLKIN clock or CPG-generated clock otherwise. A more dynamic clock selection process can be implemented later if the need arises. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-09-25drm: rcar-du: Perform the initial CRTC setup from rcar_du_crtc_get()Laurent Pinchart1-51/+56
The rcar_du_crtc_get() function is always immediately followed by a call to rcar_du_crtc_setup(). Call the later from the former to simplify the code, and add a comment to explain how the get and put calls are balanced. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-09-25drm: rcar-du: lvds: D3/E3 supportLaurent Pinchart2-47/+355
The LVDS encoders in the D3 and E3 SoCs differ significantly from those in the other R-Car Gen3 family members: - The LVDS PLL architecture is more complex and requires computing PLL parameters manually. - The PLL uses external clocks as inputs, which need to be retrieved from DT. - In addition to the different PLL setup, the startup sequence has changed *again* (seems someone had trouble making his/her mind). Supporting all this requires DT bindings extensions for external clocks, brand new PLL setup code, and a few quirks to handle the differences in the startup sequence. The implementation doesn't support all hardware features yet, namely - Using the LV[01] clocks generated by the CPG as PLL input. - Providing the LVDS PLL clock to the DU for use with the RGB output. Those features can be added later when the need will arise. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-09-25drm: bridge: thc63: Restrict modes based on hardware operating frequencyLaurent Pinchart1-0/+18
The THC63LVD1024 is restricted to a pixel clock frequency in the range of 8 to 135 MHz. Implement the bridge .mode_valid() operation accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-09-25dt-bindings: display: renesas: lvds: Add EXTAL and DU_DOTCLKIN clocksLaurent Pinchart1-1/+11
On the D3 and E3 SoCs, the LVDS encoder can derive its internal pixel clock from an externally supplied clock, either through the EXTAL pin or through one of the DU_DOTCLKINx pins. Add corresponding clocks to the DT bindings. To retain backward compatibility with DT that don't specify the clock-names property, the functional clock must always be specified first, and the clock-names property is optional when only the functional clock is specified. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-09-24dt-bindings: display: renesas: lvds: Document r8a77990 bindingsLaurent Pinchart1-0/+1
The E3 (r8a77990) supports two LVDS channels. Extend the binding to support them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-09-24dt-bindings: display: renesas: du: Document r8a77990 bindingsLaurent Pinchart1-0/+2
Document the E3 (r8a77990) SoC in the R-Car DU bindings. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2018-09-19drm/amdgpu: Exclude MM engines for vega20 virtual deviceFrank Min1-2/+4
Temporary disable UVD/VCE block if is virtual device Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: add vega20 sriov capability detectionFrank Min1-2/+13
Add sriov capability detection for vega20, then can check if device is virtual device. Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: move reserving GDS/GWS/OA into common codeChristian König4-57/+18
We don't need that in the per ASIC code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: initialize GDS/GWS/OA domains even when they are zero sizedChristian König1-30/+18
Stops crashing on SI. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: fix up GDS/GWS/OA shiftingChristian König9-71/+25
That only worked by pure coincident. Completely remove the shifting and always apply correct PAGE_SHIFT. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: fix shadow BO restoringChristian König3-120/+43
Don't grab the reservation lock any more and simplify the handling quite a bit. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: always recover VRAM during GPU recoveryChristian König1-5/+5
It shouldn't add much overhead and we should make sure that critical VRAM content is always restored. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: shadow BOs don't need any alignmentChristian König1-3/+2
They aren't directly used by the hardware. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: always enable shadow BOs v2Christian König1-13/+1
Even when GPU recovery is disabled we could run into a manually triggered recovery. v2: keep accidental removed comments Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: stop pipelining VM PDs/PTs movesChristian König2-2/+6
We are going to need this for recoverable page fault handling and it makes shadow handling during GPU reset much more easier. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: remove fence fallbackChristian König3-58/+0
DC doesn't seem to have a fallback path either. So when interrupts doesn't work any more we are pretty much busted no matter what. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amd/powerplay: retrieve the updated clock table after ODEvan Quan2-26/+90
With OD settings applied, the clock table will be updated accordingly. We need to retrieve the new clock tables then. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amd/powerplay: update OD to take voltage value instead of offsetEvan Quan5-41/+96
With the latest SMC fw, we are able to get the voltage value for specific frequency point. So, we update the OD relates to take absolute voltage instead of offset. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amd/powerplay: update OD feature judgementEvan Quan2-26/+55
Update the conditions to judge whether an OD feature should be supported on vega20. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: fix unknown vram mem type for vega20Hawking Zhang1-5/+9
vega20 should use umc_info v3_3 instead of v3_1. There are serveral versions of umc_info for vega series. Compared to various versions of these structures, vram_info strucure is unified for vega series. The patch switch to query mem_type from vram_info structure for all the vega series dGPU. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: update vram_info structure in atomfirmware.hHawking Zhang2-10/+12
atomfirmware has structure changes in varm_info. Updated it to the latest one. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/radeon: change function signature to pass full rangeMathieu Malaterre1-1/+1
In function ‘radeon_process_i2c_ch’ a comparison of a u8 value against 255 is done. Since it is always false, change the signature of this function to use an `int` instead, which match the type used in caller: `radeon_atom_hw_i2c_xfer`. Fix the following warning triggered with W=1: CC [M] drivers/gpu/drm/radeon/atombios_i2c.o drivers/gpu/drm/radeon/atombios_i2c.c: In function ‘radeon_process_i2c_ch’: drivers/gpu/drm/radeon/atombios_i2c.c:71:11: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (num > ATOM_MAX_HW_I2C_READ) { ^ Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: use processed values for countingA. Wilcox2-4/+4
adev->gfx.rlc has the values from rlc_hdr already processed by le32_to_cpu. Using the rlc_hdr values on big-endian machines causes a kernel Oops due to writing well outside of the array (0x24000000 instead of 0x24). Signed-off-by: A. Wilcox <AWilcox@Wilcox-Tech.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amd/amdgpu: Avoid fault when allocating an empty buffer objectTom St Denis1-1/+2
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: drop size checkChristian König1-8/+6
We no don't allocate zero sized kernel BOs any longer. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: don't allocate zero sized kernel BOsChristian König1-0/+5
Just free the BO if the size should be zero. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: stop crashing on GDS/GWS/OA evictionChristian König1-0/+18
Simply ignore any copying here. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: add GDS, GWS and OA debugfs filesChristian König1-6/+6
Additional to the existing files for VRAM and GTT. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: fix parameter documentation for amdgpu_vm_free_ptsChristian König1-2/+1
The function was modified without updating the documentation. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm/amdgpu: add amdgpu_vm_entries_mask v2Christian König1-7/+27
We can't get the mask for the root directory from the number of entries. So add a new function to avoid that problem. v2: fix typo in mask Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-19drm: add LG eDP panel to quirk databaseLee, Shawn C1-0/+2
The N value was computed by kernel driver that based on synchronous clock mode. But only specific N value (0x8000) would be acceptable for LG LP140WF6-SPM1 eDP panel which is running at asynchronous clock mode. With the other N value, Tcon will enter BITS mode and display black screen. Add this panel into quirk database and give particular N value when calculate M/N divider. v2: no update v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-4-git-send-email-shawn.c.lee@intel.com
2018-09-19drm: Change limited M/N quirk to constant N quirk.Lee, Shawn C6-27/+25
Some DP dongles in particular seem to be fussy about too large link M/N values. Set specific value for N divider can resolve this issue per dongle vendor's comment. So configure N as constant value (0x8000) to instead of reduce M/N formula when specific DP dongle connected. v2: add more comments for issue description and fix typo. v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Tested-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-3-git-send-email-shawn.c.lee@intel.com
2018-09-19drm: Add support for device_id based detection.Lee, Shawn C1-1/+14
DP quirk list just compare sink or branch device's OUI so far. That means particular vendor's products will be applied specific change. This change would confirm device_id the same or not. Then driver can implement some changes for branch/sink device that really need additional WA. v2: use sizeof instead of hard coded '6' v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Tested-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-2-git-send-email-shawn.c.lee@intel.com
2018-09-19drm/virtio: add dma sync for dma mapped virtio gpu framebuffer pagesJiandi An3-7/+26
With virtio gpu ttm-pages being dma mapped, dma sync is needed when swiotlb is used as bounce buffers, before TRANSFER_TO_HOST_2D/3D commands are sent. Signed-off-by: Jiandi An <jiandi.an@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180919070931.91168-1-jiandi.an@amd.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-19drm/sun4i: add support for R40 HDMI PHYIcenowy Zheng1-0/+12
The R40 SoC has a HDMI PHY that is possible to mux two video PLLs. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-4-icenowy@aosc.io
2018-09-19dt-bindings: sun4i-drm: add compatible for R40 HDMI PHYIcenowy Zheng1-2/+3
The Allwinner R40 HDMI PHY is currently the only one that seems to be able to select between two PLL inputs. Add a compatible string for it, and the pll-1 clock input definition. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-3-icenowy@aosc.io
2018-09-15drm: rcar-du: Remove packed VYUY supportKieran Bingham1-2/+0
The Gen3 VSP used by the DU for display does not support the packed VYUY pixel format. Gen2 VSP hardware is able to process this format, but DU + VSP operation isn't enabled on Gen2, and VYUY isn't a strategic format, so it can be ignored. Remove the format from the capabilities of the DU driver. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Update framebuffer pitch and alignment limits for Gen3Laurent Pinchart1-12/+23
The framebuffer pitch and alignment constraints reflect the limitations of the Gen2 DU hardware. On Gen3, the DU has no memory interface and thus doesn't impose any constraint. The limitations come instead from the VSP that has a limit of 65535 bytes for the pitch and no alignment constraint. Update the checks accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Add support for missing pixel formatsKoji Matsuoka1-0/+32
This patch supports pixel format of RGB332, ARGB4444, XRGB4444, BGR888, RGB888, BGRA8888, BGRX8888 and YVYU. VYUY pixel format is not supported by H/W specification. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [Reordered formats with RGB first] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Update Gen3 output limitationsKieran Bingham1-2/+12
The R-Car Gen3 DU utilises the VSP1 hardware for memory access. The limits on the RPF and WPF in this pipeline are 8190x8190. Update the supported maximum sizes accordingly. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: lvds: add R8A77980 supportSergei Shtylyov1-0/+1
Add support for the R-Car V3H (R8A77980) SoC to the LVDS encoder driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Write ESCR and OTAR as CRTC registersJacopo Mondi2-7/+6
The ESCR and OTAR registers exist in each DU channel, but at different offsets for odd and even channels. This led to usage of the group register access API to write them, with offsets macros named ESCR/OTAR and ESCR2/OTAR2 for the first and second ESCR/OTAR register in the group respectively. The names are confusing as it suggests that the ESCR/OTAR registers for DU0 and DU2 are taken into account, especially with writes performed to the group register access API. Rename the offsets to ESCR/OTAR02 and ESCR/OTAR13, and use the CRTC register access API to clarify the code. The offsets values are updated accordingly. Cosmetic patch, no functional changes intended. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [Squashed ESCR and OTAR changes in a single commit] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Rename and document dpll_ch fieldJacopo Mondi3-5/+6
Document and re-name the 'dpll_ch' field to a more precise 'dpll_mask' for consistency with the 'channels_mask' field defined in 'struct rcar_du_device_info'. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-09-15drm: rcar-du: Improve non-DPLL clock selectionJacopo Mondi1-31/+54
DU channels not equipped with a DPLL use an SoC internal (provided by the CPG) or external clock source combined with a DU internal divider to generate the desired output dot clock frequency. The current clock selection procedure does not fully exploit the ability of external clock sources to generate the exact dot clock frequency by themselves, but relies instead on tuning the internal DU clock divider only, resulting in a less precise clock generation process. When possible, and desirable, ask the external clock source for the exact output dot clock frequency, and select the clock source that produces the frequency closest to the desired output dot clock. This patch specifically targets platforms (like Salvator-X[S] and ULCBs) where the DU's input dotclock.in is generated by the versaclock VC5 clock source, which is capable of generating the exact rate the DU needs as pixel clock output. This patch fixes higher resolution modes which requires an high pixel clock output currently not working on non-HDMI DU channel (such as 1920x1080@60Hz on the VGA output). Fixes: 1b30dbde8596 ("drm: rcar-du: Add support for external pixel clock") Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> [Factor out code to a helper function] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-09-15drm: rcar-du: Rework clock configuration based on hardware limitsLaurent Pinchart1-61/+73
The DU channels that have a display PLL (DPLL) can only use external clock sources, and don't have an internal clock divider (with the exception of H3 ES1.x where the post-divider is present and needs to be used as a workaround for a DPLL silicon issue). Rework the clock configuration to take this into account, avoiding selection of non-existing clock sources or usage of a missing post-divider. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-09-14drm/amd/display: Drop amdgpu_dm_prev_state structLeo Li1-9/+0
[Why] It's not being used [How] Nuke it Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.