aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-sqlite.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-08-31drm/amd/display: Initialize lt_settings on instantiationMichael Strauss1-3/+3
[WHY] lt_settings' pointers remain uninitialized but nonzero if display fails to light up with no DPCD/EDID info populated, leading to a hang on access Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-31drm/amd/display: cleanup idents after a revertAngus Wang1-1/+1
[WHY] The change has caused high idle memory clock speed and power consumption at some resolutions and frame rates for Navi10 [HOW] Reverted change "drm/amd/display: Fixed Intermittent blue screen on OLED panel" Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Angus Wang <angus.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-31drm/amd/display: Fix memory leak reported by coverityAnson Jacob1-1/+5
Free memory allocated if any of the previous allocations failed. >>> CID 1487129: Resource leaks (RESOURCE_LEAK) >>> Variable "vpg" going out of scope leaks the storage it points to. Addresses-Coverity-ID: 1487129: ("Resource leaks") Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amdgpu/swsmu: fix spelling mistake "minimun" -> "minimum"Colin Ian King3-3/+3
There are three identical spelling mistakes in dev_err messages. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amdgpu: Disable PCIE_DPM on Intel RKL PlatformKoba Ko1-1/+16
Due to high latency in PCIE clock switching on RKL platforms, switching the PCIE clock dynamically at runtime can lead to HDMI/DP audio problems. On newer asics this is handled in the SMU firmware. For SMU7-based asics, disable PCIE clock switching to avoid the issue. AMD provide a parameter to disable PICE_DPM. modprobe amdgpu ppfeaturemask=0xfff7bffb It's better to contorl PCIE_DPM in amd gpu driver, switch PCI_DPM by determining intel RKL platform for SMU7-based asics. Fixes: 1a31474cdb48 ("drm/amd/pm: workaround for audio noise issue") Ref: https://lists.freedesktop.org/archives/amd-gfx/2021-August/067413.html Signed-off-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amdgpu: show both cmd id and name when psp cmd failedLang Yu1-4/+4
To cover the corner case that people want to know the ID of an UNKNOWN CMD. Suggested-by: John Clements <john.clements@amd.com> Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amd/display: setup system context for APUsAaron Liu1-1/+1
Scatter/gather is APU feature starting from carrizo. adev->apu_flags is not used for all APUs. adev->flags & AMD_IS_APU can be used for all APUs. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-30drm/amdgpu: Enable S/G for Yellow CarpNicholas Kazlauskas1-0/+1
Missing code for Yellow Carp to enable scatter gather - follows how DCN21 support was added. Tested that 8k framebuffer allocation and display can now succeed after applying the patch. v2: Add hookup in DM Reviewed-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-30drm/amd/pm: And destination bounds checking to struct copyKees Cook4-11/+32
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. The "Board Parameters" members of the structs: struct atom_smc_dpm_info_v4_5 struct atom_smc_dpm_info_v4_6 struct atom_smc_dpm_info_v4_7 struct atom_smc_dpm_info_v4_10 are written to the corresponding members of the corresponding PPTable_t variables, but they lack destination size bounds checking, which means the compiler cannot verify at compile time that this is an intended and safe memcpy(). Since the header files are effectively immutable[1] and a struct_group() cannot be used, nor a common struct referenced by both sides of the memcpy() arguments, add a new helper, amdgpu_memcpy_trailing(), to perform the bounds checking at compile time. Replace the open-coded memcpy()s with amdgpu_memcpy_trailing() which includes enough context for the bounds checking. "objdump -d" shows no object code changes. [1] https://lore.kernel.org/lkml/e56aad3c-a06f-da07-f491-a894a570d78f@amd.com Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Feifei Xu <Feifei.Xu@amd.com> Cc: Likun Gao <Likun.Gao@amd.com> Cc: Jiawei Gu <Jiawei.Gu@amd.com> Cc: Evan Quan <evan.quan@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amdgpu: reenable BACO support for 699F:C7 polaris12 SKUEvan Quan1-8/+1
This reverts the commit below: "drm/amdgpu: disable BACO support for 699F:C7 polaris12 SKU temporarily". As the S3 hang issue has been fixed by another commit: "drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend". Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amd/amdgpu: Add ready_to_reset resp for vega10YuBiao Wang2-0/+3
Send response to host after received the flr notification from host. Port NV change to vega10. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Jingwen Chen <Jingwen.Chen2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amdgpu: add some additional RDNA2 PCI IDsAlex Deucher1-0/+17
New PCI IDs. Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amdgpu: correct comments in memory type managersYifan Zhang2-5/+5
The parameters were renamed. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amdgpu: Process any VBIOS RAS EEPROM addressLuben Tuikov1-12/+13
We can now process any RAS EEPROM address from VBIOS. Generalize so as to compute the top three bits of the 19-bit EEPROM address, from any byte returned as the "i2c address" from VBIOS. Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amdgpu: Fixes to returning VBIOS RAS EEPROM addressLuben Tuikov1-17/+33
1) Generalize the function--if the user didn't set i2c_address, still return true/false to indicate whether VBIOS contains the RAS EEPROM address. This function shouldn't evaluate whether the user set the i2c_address pointer or not. 2) Don't touch the caller's i2c_address, unless you have to--this function shouldn't have side effects. 3) Correctly set the function comment as a kernel-doc comment. Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm:dcn31: fix boolreturn.cocci warningsJing Yangyang1-2/+2
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:112:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_backlight_on' with return type bool ./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:122:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_powered_on' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding boxNicholas Kazlauskas3-5/+8
[Why] This is a global parameter, not a per pipe parameter and it's useful for experimenting with the prefetch schedule to be adjustable from the SOC bb. [How] Add a parameter to the SOC bb, default is the existing policy for all DCN. Fill it in when filling SOC bb parameters. Revert the policy to use MinDCFClk at the same time since that's not going to give us P-State in most cases on the spreadsheet. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Remove duplicate dml initAurabindo Pillai1-5/+0
[Why & How] DML is initialized again unnecessarily after its done conditionally. Remove the duplicate initialization Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Update bounding box states (v2)Jerry (Fangzhi) Zuo1-10/+31
[Why] Drop hardcoded dispclk, dppclk, phyclk [How] Read the corresponding values from clock table entries already populated. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Cc: stable@vger.kernel.org Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Update number of DCN3 clock statesAurabindo Pillai1-0/+1
[Why & How] The DCN3 SoC parameter num_states was calculated but not saved into the object. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Cc: stable@vger.kernel.org Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amdgpu: disable GFX CGCG in aldebaranHawking Zhang1-2/+0
disable GFX CGCG and CGLS to workaround a hardware issue found in aldebaran. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amdgpu: Clear RAS interrupt status on aldebaranJohn Clements1-5/+29
resolve register address issue for detecting/clearing RAS interrupt Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amdgpu: Add support for RAS XGMI err queryJohn Clements1-0/+65
Update XGMI RAS to support error query on aldebaran Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amdkfd: Account for SH/SE count when setting up cu masks.Sean Keely2-21/+64
On systems with multiple SH per SE compute_static_thread_mgmt_se# is split into independent masks, one for each SH, in the upper and lower 16 bits. We need to detect this and apply cu masking to each SH. The cu mask bits are assigned first to each SE, then to alternate SHs, then finally to higher CU id. This ensures that the maximum number of SPIs are engaged as early as possible while balancing CU assignment to each SH. v2: Use max SH/SE rather than max SH in cu_per_sh. v3: Fix comment blocks, ensure se_mask is initially zero filled, and correctly assign se.sh.cu positions to unset bits in cu_mask. Signed-off-by: Sean Keely <Sean.Keely@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-25drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domainYifan Zhang4-7/+7
amdgpu_bo_get_preferred_pin_domain is used for page tables creation, which is not involved with page pinning. And it is used in more cases than display scanout, modify its documentation as well. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-25drm/amdgpu: drop redundant cancel_delayed_work_sync callEvan Quan4-6/+0
As those _sw_fini() APIs follow just after _suspend() APIs. And the cancel_delayed_work_sync was already called in latter. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-25drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspendEvan Quan6-1/+144
This is a supplement for commit below: "drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend". Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-25drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspendEvan Quan2-0/+47
Perform proper cleanups on UVD/VCE suspend: powergate enablement, clockgating enablement and dpm disablement. This can fix some hangs observed on suspending when UVD/VCE still using(e.g. issue "pm-suspend" when video is still playing). Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amdkfd: map SVM range with correct access permissionPhilip Yang1-48/+86
Restore retry fault or prefetch range, or restore svm range after eviction to map range to GPU with correct read or write access permission. Range may includes multiple VMAs, update GPU page table with offset of prange, number of pages for each VMA according VMA access permission. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amdkfd: check access permisson to restore retry faultPhilip Yang6-8/+39
Check range access permission to restore GPU retry fault, if GPU retry fault on address which belongs to VMA, and VMA has no read or write permission requested by GPU, failed to restore the address. The vm fault event will pass back to user space. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amdgpu: Update RAS XGMI Error QueryJohn Clements1-1/+3
Resolve bug querying error on unsupported ASIC Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amdgpu: Add driver infrastructure for MCA RASJohn Clements9-2/+388
Add MCA specific IP blocks targetting RAS features Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/display: Add Logging for HDMI color depth informationPraful Swarnakar1-0/+11
[Why] Recent HDMI2.0 HF1-1 V-Swing testing showed that logging deep color status helps in validation of testcase. [How] Add logging based on various color depths and pixel encoding formats. Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com> Reviewed-by: Hersen Wu <hersenwu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/amdgpu: consolidate PSP TA init shared buf functionsCandice Li1-99/+43
Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/amdgpu: add name field back to ras_common_ifCandice Li1-0/+1
Adding name field back to ras_common_if to work around error injection failure with amdgpuras tool. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amdgpu: Fix build with missing pm_suspend_target_state module exportBorislav Petkov1-1/+1
Building a randconfig here triggered: ERROR: modpost: "pm_suspend_target_state" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! because the module export of that symbol happens in kernel/power/suspend.c which is enabled with CONFIG_SUSPEND. The ifdef guards in amdgpu_acpi_is_s0ix_supported(), however, test for CONFIG_PM_SLEEP which is defined like this: config PM_SLEEP def_bool y depends on SUSPEND || HIBERNATE_CALLBACKS and that randconfig has: # CONFIG_SUSPEND is not set CONFIG_HIBERNATE_CALLBACKS=y leading to the module export missing. Change the ifdeffery to depend directly on CONFIG_SUSPEND. Fixes: 5706cb3c910c ("drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/YSP6Lv53QV0cOAsd@zn.tnic Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-24drm/radeon: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-3/+3
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amdgpu: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-3/+3
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amdkfd: CWSR with sw scheduler on Aldebaran and ArcturusMukul Joshi4-2/+6
Program trap handler settings to enable CWSR with software scheduler on Aldebaran and Arcturus. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amdgpu/OLAND: clip the ref divider max valueShashank Sharma3-9/+16
This patch limits the ref_div_max value to 100, during the calculation of PLL feedback reference divider. With current value (128), the produced fb_ref_div value generates unstable output at particular frequencies. Radeon driver limits this value at 100. On Oland, when we try to setup mode 2048x1280@60 (a bit weird, I know), it demands a clock of 221270 Khz. It's been observed that the PLL calculations using values 128 and 100 are vastly different, and look like this: +------------------------------------------+ |Parameter |AMDGPU |Radeon | | | | | +-------------+----------------------------+ |Clock feedback | | |divider max | 128 | 100 | |cap value | | | | | | | | | | | +------------------------------------------+ |ref_div_max | | | | | 42 | 20 | | | | | | | | | +------------------------------------------+ |ref_div | 42 | 20 | | | | | +------------------------------------------+ |fb_div | 10326 | 8195 | +------------------------------------------+ |fb_div | 1024 | 163 | +------------------------------------------+ |fb_dev_p | 4 | 9 | |frac fb_de^_p| | | +----------------------------+-------------+ With ref_div_max value clipped at 100, AMDGPU driver can also drive videmode 2048x1280@60 (221Mhz) and produce proper output without any blanking and distortion on the screen. PS: This value was changed from 128 to 100 in Radeon driver also, here: https://github.com/freedesktop/drm-tip/commit/4b21ce1b4b5d262e7d4656b8ececc891fc3cb806 V1: Got acks from: Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> V2: - Restricting the changes only for OLAND, just to avoid any regression for other cards. - Changed unsigned -> unsigned int to make checkpatch quiet. V3: Apply the change on SI family (not only oland) (Christian) Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eddy Qin <Eddy.Qin@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/display: refactor riommu invalidation waEric Yang4-20/+1
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/i915/selftest: Fix use of err in igt_reset_{fail, nop}_engine()Nathan Chancellor1-2/+2
Clang warns: In file included from drivers/gpu/drm/i915/gt/intel_reset.c:1514: drivers/gpu/drm/i915/gt/selftest_hangcheck.c:465:62: warning: variable 'err' is uninitialized when used here [-Wuninitialized] pr_err("[%s] Create context failed: %d!\n", engine->name, err); ^~~ ... drivers/gpu/drm/i915/gt/selftest_hangcheck.c:580:62: warning: variable 'err' is uninitialized when used here [-Wuninitialized] pr_err("[%s] Create context failed: %d!\n", engine->name, err); ^~~ ... 2 warnings generated. This appears to be a copy and paste issue. Use ce directly using the %pe specifier to pretty print the error code so that err is not used uninitialized in these functions. Fixes: 3a7b72665ea5 ("drm/i915/selftest: Bump selftest timeouts for hangcheck") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210813171158.2665823-1-nathan@kernel.org (cherry picked from commit ac5a2dff428ab59b5c5bbb4b28311141aa461c07) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-08-24drm/i915/gt: Potential error pointer dereference in pinned_context()Dan Carpenter1-1/+1
If the intel_engine_create_pinned_context() function returns an error pointer, then dereferencing "ce" will Oops. Use "vm" instead of "ce->vm". Fixes: cf586021642d ("drm/i915/gt: Pipelined page migration") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210813113600.GC30697@kili (cherry picked from commit ff12ce2c9cb1cd09017151424db66de803984abc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-08-24drm/i915/adl_p: Also disable underrun recovery with MSOMatt Roper1-0/+3
One of the cases that the bspec lists for when underrun recovery must be disabled is "COG;" that note actually refers to eDP multi-segmented operation (MSO). Let's ensure the this additional restriction is honored by the driver. Bspec: 50351 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: ba3b049f4774 ("drm/i915/adl_p: Allow underrun recovery when possible") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210816204112.2960624-1-matthew.d.roper@intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit c00e14cd4d3fbc5469d6e367371f9e4786a08c03) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-08-24drm/i915: Use designated initializers for init/exit tableKees Cook1-13/+24
The kernel builds with -Werror=designated-init, and __designated_init is used by CONFIG_GCC_PLUGIN_RANDSTRUCT for automatically selected (all function pointer) structures. Include the field names in the init/exit table. Avoids warnings like: drivers/gpu/drm/i915/i915_module.c:59:4: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init] Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Fixes: a04ea6ae7c67 ("drm/i915: Use a table for i915_init/exit (v2)") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210817233357.2379455-1-keescook@chromium.org (cherry picked from commit 90fd2194a0cc52eb7a61dfa6412a0e498c58c688) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-08-22drm/exynos: Always initialize mapping in exynos_drm_register_dma()Nathan Chancellor1-0/+2
In certain randconfigs, clang warns: drivers/gpu/drm/exynos/exynos_drm_dma.c:121:19: warning: variable 'mapping' is uninitialized when used here [-Wuninitialized] priv->mapping = mapping; ^~~~~~~ drivers/gpu/drm/exynos/exynos_drm_dma.c:111:16: note: initialize the variable 'mapping' to silence this warning void *mapping; ^ = NULL 1 warning generated. This occurs when CONFIG_EXYNOS_IOMMU is enabled and both CONFIG_ARM_DMA_USE_IOMMU and CONFIG_IOMMU_DMA are disabled, which makes the code look like void *mapping; if (0) mapping = arm_iommu_create_mapping() else if (0) mapping = iommu_get_domain_for_dev() ... priv->mapping = mapping; Add an else branch that initializes mapping to the -ENODEV error pointer so that there is no more warning and the driver does not change during runtime. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2021-08-22drm/exynos: Convert from atomic_t to refcount_t on g2d_cmdlist_userptr->refcountXiyu Yang1-5/+6
refcount_t type and corresponding API can protect refcounters from accidental underflow and overflow and further use-after-free situations. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2021-08-22drm/exynos: g2d: fix missing unlock on error in g2d_runqueue_worker()Wei Yongjun1-1/+2
Add the missing unlock before return from function g2d_runqueue_worker() in the error handling case. Fixes: 445d3bed75de ("drm/exynos: use pm_runtime_resume_and_get()") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2021-08-20drm/amdgpu: Cancel delayed work when GFXOFF is disabledMichel Dänzer2-17/+30
schedule_delayed_work does not push back the work if it was already scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms after the first time GFXOFF was disabled and re-enabled, even if GFXOFF was disabled and re-enabled again during those 100 ms. This resulted in frame drops / stutter with the upcoming mutter 41 release on Navi 14, due to constantly enabling GFXOFF in the HW and disabling it again (for getting the GPU clock counter). To fix this, call cancel_delayed_work_sync when the disable count transitions from 0 to 1, and only schedule the delayed work on the reverse transition, not if the disable count was already 0. This makes sure the delayed work doesn't run at unexpected times, and allows it to be lock-free. v2: * Use cancel_delayed_work_sync & mutex_trylock instead of mod_delayed_work. v3: * Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König) v4: * Fix race condition between amdgpu_gfx_off_ctrl incrementing adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off checking for it to be 0 (Evan Quan) Cc: stable@vger.kernel.org Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3 Acked-by: Christian König <christian.koenig@amd.com> # v3 Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-20drm/amdgpu: use the preferred pin domain after the checkChristian König1-5/+5
For some reason we run into an use case where a BO is already pinned into GTT, but should be pinned into VRAM|GTT again. Handle that case gracefully as well. Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.