aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-sqlite.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-12-26hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMINGDenis Pauk1-0/+2
ASUS ROG STRIX B550-A/X570-I GAMING boards have got an nct6775 chip, but by default there's no use of it because of resource conflict with WMI method. This commit adds "ROG STRIX B550-A GAMING" and "ROG STRIX X570-I GAMING" to the list of boards that can be monitored using ASUS WMI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Tested-by: Daniel Gibson <metalcaedes@gmail.com> Tested-by: Michael Altizer <michael@theoddone.net> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/r/20211211180037.367062-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (pmbus) Add support for MPS Multi-phase mp5023Howard.Chiu@quantatw.com5-0/+162
Add support for mp5023 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a Hot-Swap Controller. Signed-off-by: Howard Chiu <howard.chiu@quantatw.com> Link: https://lore.kernel.org/r/HKAPR04MB400349AA406694FB976D78D096709@HKAPR04MB4003.apcprd04.prod.outlook.com [groeck: Added MODULE_IMPORT_NS, entry in index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26dt-bindings: add Delta AHE-50DC fan control moduleZev Weiss1-0/+2
This is the integrated fan control module of the Delta AHE-50DC Open19 power shelf. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211208213703.2577-3-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (pmbus) Add Delta AHE-50DC fan control module driverZev Weiss4-0/+131
This device is an integrated module of the Delta AHE-50DC Open19 power shelf. I haven't been able to procure any proper documentation for it, but it seems to be a (somewhat minimally) PMBus-compliant device. It provides four fan speeds, four temperatures (three standard and one manufacturer-specific via a virtual second page), and a vin reading. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20211208213703.2577-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: prefix kernel-doc comments for structs with structLukas Bulwahn1-2/+2
The command ./scripts/kernel-doc -none include/linux/hwmon.h warns: include/linux/hwmon.h:406: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Channel information include/linux/hwmon.h:425: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Chip configuration Address those kernel-doc warnings by prefixing kernel-doc descriptions for structs with the keyword 'struct'. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20211216154257.26758-1-lukas.bulwahn@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTCLinus Walleij2-0/+5
This adds the Samsung 1404-001221 NTC thermistor to the NTC thermistor driver. As far as I can tell it is electrically compatible with the Murata 47K NTC thermistor. This thermistor is mounted in a variety of Samsung products. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211215174241.1496169-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Drop OF dependencyLinus Walleij1-1/+0
The driver has been augmented to just use device properties so the OF dependency can be dropped. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211215142933.1409324-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (dell-smm) Unify i8k_ioctl() and i8k_ioctl_unlocked()Armin Wolf1-19/+9
The only purpose of i8k_ioctl() is to call i8k_ioctl_unlocked() with i8k_mutex held. Judging from the hwmon code, this mutex only needs to be held when setting the fan speed/mode, so the operation of I8K_SET_FAN is guaranteed to be atomic. Unify both functions and reduce the locking of i8k_mutex to I8K_SET_FAN. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211211155422.16830-3-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (dell-smm) Simplify ioctl handlerArmin Wolf1-21/+9
The second switch-case has no real purpose: - for I8K_BIOS_VERSION, val does not represent a return value, making the check for error values unnecessary. - for I8K_MACHINE_ID, val remains zero, so the error check is unnecessary too. Remove the switch-case and move the calls to copy_to_user() into the first switch-case for I8K_BIOS_VERSION/_MACHINE_ID. Omit buff[] since data->bios_machineid already contains the string with the necessary zero padding through devm_kzalloc(). Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211211155422.16830-2-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (raspberrypi) Exit immediately in case of error in initArmin Wolf1-3/+4
Exit immediately if devm_hwmon_device_register_with_info() fails since registering a delayed work whould be useless in such a case anyway. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20211211184449.18211-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (nct6775) delete some extension linesDan Carpenter1-4/+2
This code can fit on one line. No need to break it up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211215114050.GB14967@kili Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Move DT matches to the driver blockLinus Walleij1-35/+35
This moves the device tree match data toward the end of the driver which is the convention, here we can also add ACPI and similar match data in a conforming manner. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211205235948.4167075-3-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Switch to generic firmware propsLinus Walleij1-17/+19
This switches to retrieveing the configuration of the NTC from generic firmware properties so that we get neutral from device tree: now ACPI or, more importantly, software nodes can be used to spawn NTC devices provided they have the required properties. This was inspired by the similar changes made to the IIO drivers. This was tested on the Ux500 HREF with the NTC devices probing from device tree just as fine after this as before. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211206020423.62402-2-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Move and refactor DT parsingLinus Walleij1-50/+43
Move the parsing of the DT config right above probe(). Allocate the state container for the driver in probe() instead of inside the DT config parsing function: as a result return an int instead of a pointer. Drop the check for !np: we can only probe from DT right now so no risk of ending up here. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211206020423.62402-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (adm1031) Remove redundant assignment to variable rangeColin Ian King1-2/+1
Variable range is being initialized with a value that is never read, it is being re-assigned in the next statement. The assignment is redundant, remove it and initialize range using the second assigned value. Clean up the formatting too by adding missing spaces. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211204233155.55454-1-colin.i.king@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (asus_wmi_sensors) fix an array overflowDan Carpenter1-1/+1
Smatch detects this array overflow: drivers/hwmon/asus_wmi_sensors.c:569 asus_wmi_configure_sensor_setup() error: buffer overflow 'hwmon_attributes' 8 <= 9 The hwmon_attributes[] array should have "hwmon_max" so that it gets larger when more attributes are added. Fixes: 9d07e54a25b8 ("hwmon: (asus_wmi_sensors) Support X370 Asus WMI.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211130105117.GH5827@kili Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (asus_wmi_ec_sensors) fix array overflowDan Carpenter1-1/+1
Smatch detected an array out of bounds error: drivers/hwmon/asus_wmi_ec_sensors.c:562 asus_wmi_ec_configure_sensor_setup() error: buffer overflow 'hwmon_attributes' 8 <= 9 The hwmon_attributes[] array needs to be declared with "hwmon_max" elements. Fixes: c04c7f7bfcbe ("hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211130105034.GG5827@kili Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (sht4x) Add device tree match tableDavid Mosberger-Tang1-0/+7
This patch enables automatic loading of the sht4x module via a device tree table entry. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Link: https://lore.kernel.org/r/20211121160637.2312106-1-davidm@egauge.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Merge platform dataLinus Walleij1-61/+48
Allocate one state container for the device: struct ntc_data. Move all items from struct ntc_thermistor_platform_data into this struct and simplify. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211125020841.3616359-5-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Drop read_uv() depend on OF and IIOLinus Walleij2-38/+16
The only possible assignment of a function to get a voltage to convert to a resistance is to use the internal function ntc_adc_iio_read() which is only available when using IIO and OF. Bite the bullet and mandate OF and IIO, drop the read_uv() callback abstraction and some ifdefs. As no board is using the platform data, all users are using OF and IIO anyway. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211125020841.3616359-4-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Drop get_ohm()Linus Walleij1-19/+2
Nothing in the kernel (this driver) is using the callback to read ohms directly. We always read a voltage and convert it to a resistance. Drop this callback. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211125020841.3616359-3-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (ntc_thermistor) Merge platform data into driverLinus Walleij2-55/+36
Platform data is supposed to be used with "board files", device descriptions in C. Since the introduction of the NTC driver in 2011, no such platforms have been submitted to the Linux kernel, and their use is strongly discouraged in favor of Device Tree, ACPI or as last resort software firmware nodes. Drop the external header and copy the platform data into the driver file. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211125020841.3616359-2-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (jc42) Add support for ONSEMI N34TS04Guenter Roeck1-0/+4
N34TS04 is a JC42.4 compatible temperature sensor from ONSEMI. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (k10temp) Support up to 12 CCDs on AMD Family of processorsBabu Moger1-3/+14
The current driver can read the temperatures from upto 8 CCDs (Core-Complex Die). The newer AMD Family 19h Models 10h-1Fh and A0h-AFh can support up to 12 CCDs. Update the driver to read up to 12 CCDs. Signed-off-by: Babu Moger <babu.moger@amd.com> Link: https://lore.kernel.org/r/163776976762.904164.5618896687524494215.stgit@bmoger-ubuntu Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (asus_wmi_sensors) Support X370 Asus WMI.Denis Pauk6-0/+763
Provides a Linux kernel module "asus_wmi_sensors" that provides sensor readouts via ASUS' WMI interface present in the UEFI of X370/X470/B450/X399 Ryzen motherboards. Supported motherboards: * ROG CROSSHAIR VI HERO, * PRIME X399-A, * PRIME X470-PRO, * ROG CROSSHAIR VI EXTREME, * ROG CROSSHAIR VI HERO (WI-FI AC), * ROG CROSSHAIR VII HERO, * ROG CROSSHAIR VII HERO (WI-FI), * ROG STRIX B450-E GAMING, * ROG STRIX B450-F GAMING, * ROG STRIX B450-I GAMING, * ROG STRIX X399-E GAMING, * ROG STRIX X470-F GAMING, * ROG STRIX X470-I GAMING, * ROG ZENITH EXTREME, * ROG ZENITH EXTREME ALPHA. Co-developed-by: Ed Brindley <kernel@maidavale.org> Signed-off-by: Ed Brindley <kernel@maidavale.org> Signed-off-by: Denis Pauk <pauk.denis@gmail.com> [groeck: Squashed: "hwmon: Fix warnings in asus_wmi_sensors.rst documetation."] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.Denis Pauk6-0/+680
Linux HWMON sensors driver for ASUS motherboards to read sensors from the embedded controller. Many ASUS motherboards do not publish all the available sensors via the Super I/O chip but the missing ones are available through the embedded controller (EC) registers. This driver implements reading those sensor data via the WMI method BREC, which is known to be present in all ASUS motherboards based on the AMD 500 series chipsets (and probably is available in other models too). The driver needs to know exact register addresses for the sensors and thus support for each motherboard has to be added explicitly. The EC registers do not provide critical values for the sensors and as such they are not published to the HWMON. Supported motherboards: * PRIME X570-PRO * Pro WS X570-ACE * ROG CROSSHAIR VIII HERO * ROG CROSSHAIR VIII DARK HERO * ROG CROSSHAIR VIII FORMULA * ROG STRIX X570-E GAMING * ROG STRIX B550-I GAMING * ROG STRIX B550-E GAMING Co-developed-by: Eugene Shalygin <eugene.shalygin@gmail.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Tested-by: Tor Vic <torvic9@mailbox.org> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (f71882fg) Add F81966 supportMenghui Wu1-0/+2
This adds hardware monitor support the Fintek F81966 Super I/O chip. Testing was done on the Aaeon SSE-IPTI Signed-off-by: Menghui Wu <Menghui_Wu@aaeon.com.tw> Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Link: https://lore.kernel.org/r/20211117024320.2428144-1-acelan.kao@canonical.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (adm1021) Improve detection of LM84, MAX1617, and MAX1617AGuenter Roeck1-4/+19
The adm1021 driver is quite generous with its automatic chip detection and easily misdetects several chips. Strengthen detection of MAX1617, MAX1617A, and LM84 to make the driver less vulnerable to false matches. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (tmp401) Hide register write address differences in regmap codeGuenter Roeck1-44/+25
Since we are using regmap access functions to write into chip registers, we can hide the difference in register write addresses within regmap code. By doing this we do not need to clear the regmap cache on register writes, and the high level code does not need to bother about different read/write register addresses. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (tmp401) Use regmapGuenter Roeck2-76/+150
Use regmap for register accesses to be able to utilize its caching functionality. This also lets us hide register access differences in regmap code. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (tmp401) Convert to _info APIGuenter Roeck1-386/+348
The new API is cleaner and reduces code size significantly. All chip accesses are 'hidden' in chip access to prepare for using regmap. Local caching code is removed, to be replaced by regmap based caching in a follow-up patch. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (tmp401) Simplify temperature register arraysGuenter Roeck1-28/+11
The difference between TMP431 and other chips of this series is that the TMP431 has an additional sensor. The register addresses for other sensors are the same for all chips. It is therefore unnecessary to maintain two different arrays for TMP431 and the other chips. Just use the same array for all chips and add the TMP431 register addresses as third column. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: Driver for Texas Instruments INA238Nathan Rossi5-0/+714
The INA238 is a I2C power monitor similar to other INA2xx devices, providing shunt voltage, bus voltage, current, power and temperature measurements. Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Link: https://lore.kernel.org/r/20211102052754.817220-3-nathan@nathanrossi.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26dt-bindings: hwmon: ti,ina2xx: Add ti,shunt-gain propertyNathan Rossi1-0/+21
Add a property to the binding to define the selected shunt voltage gain. This specifies the range and accuracy that applies to the shunt circuit. This property only applies to devices that have a selectable shunt voltage range via PGA or ADCRANGE register configuration. Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211102052754.817220-2-nathan@nathanrossi.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26dt-bindings: hwmon: ti,ina2xx: Document ti,ina238 compatible stringNathan Rossi1-0/+1
Document the compatible string for the Texas Instruments INA238, this device is a variant of the existing INA2xx devices and has the same device tree bindings (shunt resistor). Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211102052754.817220-1-nathan@nathanrossi.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (k10temp) Add support for AMD Family 19h Models 10h-1Fh and A0h-AFhBabu Moger1-0/+3
Add thermal info support for AMD Family 19h Models 10h-1Fh and A0h-AFh. Thermal info is supported via a new PCI device ID at offset 0x300h. Signed-off-by: Babu Moger <babu.moger@amd.com> Link: https://lore.kernel.org/r/163640829419.955062.12539219969781039915.stgit@bmoger-ubuntu Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26hwmon: (k10temp) Remove unused definitionsBabu Moger1-20/+0
Usage of these definitions were removed after the commit 0a4e668b5d52 ("hwmon: (k10temp) Remove support for displaying voltage and current on Zen CPUs"). So, cleanup them up. Signed-off-by: Babu Moger <babu.moger@amd.com> Link: https://lore.kernel.org/r/163640828776.955062.15863375803675701204.stgit@bmoger-ubuntu Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26x86/amd_nb: Add AMD Family 19h Models (10h-1Fh) and (A0h-AFh) PCI IDsYazen Ghannam2-0/+6
Add the new PCI Device IDs to support new generation of AMD 19h family of processors. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Babu Moger <babu.moger@amd.com> Acked-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Link: https://lore.kernel.org/r/163640828133.955062.18349019796157170473.stgit@bmoger-ubuntu Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-26Linux 5.16-rc7Linus Torvalds1-1/+1
2021-12-25mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()Liu Shixin1-0/+1
Hulk Robot reported a panic in put_page_testzero() when testing madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying get_any_page(). This is because we keep MF_COUNT_INCREASED flag in second try but the refcnt is not increased. page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:737! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: release_pages+0x53f/0x840 Call Trace: free_pages_and_swap_cache+0x64/0x80 tlb_flush_mmu+0x6f/0x220 unmap_page_range+0xe6c/0x12c0 unmap_single_vma+0x90/0x170 unmap_vmas+0xc4/0x180 exit_mmap+0xde/0x3a0 mmput+0xa3/0x250 do_exit+0x564/0x1470 do_group_exit+0x3b/0x100 __do_sys_exit_group+0x13/0x20 __x64_sys_exit_group+0x16/0x20 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: ---[ end trace e99579b570fe0649 ]--- RIP: 0010:release_pages+0x53f/0x840 Link: https://lkml.kernel.org/r/20211221074908.3910286-1-liushixin2@huawei.com Fixes: b94e02822deb ("mm,hwpoison: try to narrow window race for free pages") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-25mm/damon/dbgfs: protect targets destructions with kdamond_lockSeongJae Park1-0/+2
DAMON debugfs interface iterates current monitoring targets in 'dbgfs_target_ids_read()' while holding the corresponding 'kdamond_lock'. However, it also destructs the monitoring targets in 'dbgfs_before_terminate()' without holding the lock. This can result in a use_after_free bug. This commit avoids the race by protecting the destruction with the corresponding 'kdamond_lock'. Link: https://lkml.kernel.org/r/20211221094447.2241-1-sj@kernel.org Reported-by: Sangwoo Bae <sangwoob@amazon.com> Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [5.15.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-25mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nidThibaut Sautereau1-1/+1
The second parameter of alloc_pages_exact_nid is the one indicating the size of memory pointed by the returned pointer. Link: https://lkml.kernel.org/r/YbjEgwhn4bGblp//@coeus Fixes: abd58f38dfb4 ("mm/page_alloc: add __alloc_size attributes for better bounds checking") Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr> Acked-by: Kees Cook <keescook@chromium.org> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Levente Polyak <levente@leventepolyak.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-25mm: delete unsafe BUG from page_cache_add_speculative()Hugh Dickins1-1/+0
It is not easily reproducible, but on 5.16-rc I have several times hit the VM_BUG_ON_PAGE(PageTail(page), page) in page_cache_add_speculative(): usually from filemap_get_read_batch() for an ext4 read, yesterday from next_uptodate_page() from filemap_map_pages() for a shmem fault. That BUG used to be placed where page_ref_add_unless() had succeeded, but now it is placed before folio_ref_add_unless() is attempted: that is not safe, since it is only the acquired reference which makes the page safe from racing THP collapse or split. We could keep the BUG, checking PageTail only when folio_ref_try_add_rcu() has succeeded; but I don't think it adds much value - just delete it. Link: https://lkml.kernel.org/r/8b98fc6f-3439-8614-c3f3-945c659a1aba@google.com Fixes: 020853b6f5ea ("mm: Add folio_try_get_rcu()") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-25mm, hwpoison: fix condition in free hugetlb page pathNaoya Horiguchi1-9/+4
When a memory error hits a tail page of a free hugepage, __page_handle_poison() is expected to be called to isolate the error in 4kB unit, but it's not called due to the outdated if-condition in memory_failure_hugetlb(). This loses the chance to isolate the error in the finer unit, so it's not optimal. Drop the condition. This "(p != head && TestSetPageHWPoison(head)" condition is based on the old semantics of PageHWPoison on hugepage (where PG_hwpoison flag was set on the subpage), so it's not necessray any more. By getting to set PG_hwpoison on head page for hugepages, concurrent error events on different subpages in a single hugepage can be prevented by TestSetPageHWPoison(head) at the beginning of memory_failure_hugetlb(). So dropping the condition should not reopen the race window originally mentioned in commit b985194c8c0a ("hwpoison, hugetlb: lock_page/unlock_page does not match for handling a free hugepage") [naoya.horiguchi@linux.dev: fix "HardwareCorrupted" counter] Link: https://lkml.kernel.org/r/20211220084851.GA1460264@u2004 Link: https://lkml.kernel.org/r/20211210110208.879740-1-naoya.horiguchi@linux.dev Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reported-by: Fei Luo <luofei@unicloud.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> [5.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-25MAINTAINERS: mark more list instances as moderatedRandy Dunlap1-2/+2
Some lists that are moderated are not marked as moderated consistently, so mark them all as moderated. Link: https://lkml.kernel.org/r/20211209001330.18558-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Conor Culhane <conor.culhane@silvaco.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Jianjun Wang <jianjun.wang@mediatek.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-25kernel/crash_core: suppress unknown crashkernel parameter warningPhilipp Rudo1-0/+11
When booting with crashkernel= on the kernel command line a warning similar to Kernel command line: ro console=ttyS0 crashkernel=256M Unknown kernel command line parameters "crashkernel=256M", will be passed to user space. is printed. This comes from crashkernel= being parsed independent from the kernel parameter handling mechanism. So the code in init/main.c doesn't know that crashkernel= is a valid kernel parameter and prints this incorrect warning. Suppress the warning by adding a dummy early_param handler for crashkernel=. Link: https://lkml.kernel.org/r/20211208133443.6867-1-prudo@redhat.com Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters") Signed-off-by: Philipp Rudo <prudo@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-25mm: mempolicy: fix THP allocations escaping mempolicy restrictionsAndrey Ryabinin1-2/+1
alloc_pages_vma() may try to allocate THP page on the local NUMA node first: page = __alloc_pages_node(hpage_node, gfp | __GFP_THISNODE | __GFP_NORETRY, order); And if the allocation fails it retries allowing remote memory: if (!page && (gfp & __GFP_DIRECT_RECLAIM)) page = __alloc_pages_node(hpage_node, gfp, order); However, this retry allocation completely ignores memory policy nodemask allowing allocation to escape restrictions. The first appearance of this bug seems to be the commit ac5b2c18911f ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings"). The bug disappeared later in the commit 89c83fb539f9 ("mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask") and reappeared again in slightly different form in the commit 76e654cc91bb ("mm, page_alloc: allow hugepage fallback to remote nodes when madvised") Fix this by passing correct nodemask to the __alloc_pages() call. The demonstration/reproducer of the problem: $ mount -oremount,size=4G,huge=always /dev/shm/ $ echo always > /sys/kernel/mm/transparent_hugepage/defrag $ cat mbind_thp.c #include <unistd.h> #include <sys/mman.h> #include <sys/stat.h> #include <fcntl.h> #include <assert.h> #include <stdlib.h> #include <stdio.h> #include <numaif.h> #define SIZE 2ULL << 30 int main(int argc, char **argv) { int fd; unsigned long long i; char *addr; pid_t pid; char buf[100]; unsigned long nodemask = 1; fd = open("/dev/shm/test", O_RDWR|O_CREAT); assert(fd > 0); assert(ftruncate(fd, SIZE) == 0); addr = mmap(NULL, SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); assert(mbind(addr, SIZE, MPOL_BIND, &nodemask, 2, MPOL_MF_STRICT|MPOL_MF_MOVE)==0); for (i = 0; i < SIZE; i+=4096) { addr[i] = 1; } pid = getpid(); snprintf(buf, sizeof(buf), "grep shm /proc/%d/numa_maps", pid); system(buf); sleep(10000); return 0; } $ gcc mbind_thp.c -o mbind_thp -lnuma $ numactl -H available: 2 nodes (0-1) node 0 cpus: 0 2 node 0 size: 1918 MB node 0 free: 1595 MB node 1 cpus: 1 3 node 1 size: 2014 MB node 1 free: 1731 MB node distances: node 0 1 0: 10 20 1: 20 10 $ rm -f /dev/shm/test; taskset -c 0 ./mbind_thp 7fd970a00000 bind:0 file=/dev/shm/test dirty=524288 active=0 N0=396800 N1=127488 kernelpagesize_kB=4 Link: https://lkml.kernel.org/r/20211208165343.22349-1-arbn@yandex-team.com Fixes: ac5b2c18911f ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-25kfence: fix memory leak when cat kfence objectsBaokun Li1-0/+1
Hulk robot reported a kmemleak problem: unreferenced object 0xffff93d1d8cc02e8 (size 248): comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s) hex dump (first 32 bytes): 00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00 .@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: seq_open+0x2a/0x80 full_proxy_open+0x167/0x1e0 do_dentry_open+0x1e1/0x3a0 path_openat+0x961/0xa20 do_filp_open+0xae/0x120 do_sys_openat2+0x216/0x2f0 do_sys_open+0x57/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff93d419854000 (size 4096): comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s) hex dump (first 32 bytes): 6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30 kfence-#250: 0x0 30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d 0000000754bda12- backtrace: seq_read_iter+0x313/0x440 seq_read+0x14b/0x1a0 full_proxy_read+0x56/0x80 vfs_read+0xa5/0x1b0 ksys_read+0xa0/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 I find that we can easily reproduce this problem with the following commands: cat /sys/kernel/debug/kfence/objects echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak The leaked memory is allocated in the stack below: do_syscall_64 do_sys_open do_dentry_open full_proxy_open seq_open ---> alloc seq_file vfs_read full_proxy_read seq_read seq_read_iter traverse ---> alloc seq_buf And it should have been released in the following process: do_syscall_64 syscall_exit_to_user_mode exit_to_user_mode_prepare task_work_run ____fput __fput full_proxy_release ---> free here However, the release function corresponding to file_operations is not implemented in kfence. As a result, a memory leak occurs. Therefore, the solution to this problem is to implement the corresponding release function. Link: https://lkml.kernel.org/r/20211206133628.2822545-1-libaokun1@huawei.com Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Marco Elver <elver@google.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-23platform/x86: intel_pmc_core: fix memleak on registration failureJohan Hovold1-1/+1
In case device registration fails during module initialisation, the platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). Fixes: 938835aa903a ("platform/x86: intel_pmc_core: do not create a static struct device") Cc: stable@vger.kernel.org # 5.9 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211222105023.6205-1-johan@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-12-23net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5MNobuhiro Iwamatsu1-1/+1
ETHER_CLK_SEL_FREQ_SEL_2P5M is not 0 bit of the register. This is a value, which is 0. Fix from BIT(0) to 0. Reported-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20211223073633.101306-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.