aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-sqlite.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-09-20swiotlb-xen: this is PV-only on x86Jan Beulich3-13/+1
The code is unreachable for HVM or PVH, and it also makes little sense in auto-translated environments. On Arm, with xen_{create,destroy}_contiguous_region() both being stubs, I have a hard time seeing what good the Xen specific variant does - the generic one ought to be fine for all purposes there. Still Arm code explicitly references symbols here, so the code will continue to be included there. Instead of making PCI_XEN's "select" conditional, simply drop it - SWIOTLB_XEN will be available unconditionally in the PV case anyway, and is - as explained above - dead code in non-PV environments. This in turn allows dropping the stubs for xen_{create,destroy}_contiguous_region(), the former of which was broken anyway - it failed to set the DMA handle output. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/5947b8ae-fdc7-225c-4838-84712265fc1e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20xen/pci-swiotlb: reduce visibility of symbolsJan Beulich2-7/+3
xen_swiotlb and pci_xen_swiotlb_init() are only used within the file defining them, so make them static and remove the stubs. Otoh pci_xen_swiotlb_detect() has a use (as function pointer) from the main pci-swiotlb.c file - convert its stub to a #define to NULL. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/aef5fc33-9c02-4df0-906a-5c813142e13c@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20PCI: only build xen-pcifront in PV-enabled environmentsJan Beulich1-1/+1
The driver's module init function, pcifront_init(), invokes xen_pv_domain() first thing. That construct produces constant "false" when !CONFIG_XEN_PV. Hence there's no point building the driver in non-PV configurations. Drop the (now implicit and generally wrong) X86 dependency: At present, XEN_PV can only be set when X86 is also enabled. In general an architecture supporting Xen PV (and PCI) would want to have this driver built. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/3a7f6c9b-215d-b593-8056-b5fe605dafd7@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20swiotlb-xen: ensure to issue well-formed XENMEM_exchange requestsJan Beulich1-3/+4
While the hypervisor hasn't been enforcing this, we would still better avoid issuing requests with GFNs not aligned to the requested order. Instead of altering the value also in the call to panic(), drop it there for being static and hence easy to determine without being part of the panic message. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/7b3998e3-1233-4e5a-89ec-d740e77eb166@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20Xen/gntdev: don't ignore kernel unmapping errorJan Beulich1-0/+8
While working on XSA-361 and its follow-ups, I failed to spot another place where the kernel mapping part of an operation was not treated the same as the user space part. Detect and propagate errors and add a 2nd pr_debug(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/c2513395-74dc-aea3-9192-fd265aa44e35@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20xen/x86: drop redundant zeroing from cpu_initialize_context()Jan Beulich1-4/+0
Just after having obtained the pointer from kzalloc() there's no reason at all to set part of the area to all zero yet another time. Similarly there's no point explicitly clearing "ldt_ents". Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com> Link: https://lore.kernel.org/r/14881835-a48e-29fa-0870-e177b10fcf65@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15swiotlb-xen: drop DEFAULT_NSLABSJan Beulich1-2/+0
It was introduced by 4035b43da6da ("xen-swiotlb: remove xen_set_nslabs") and then not removed by 2d29960af0be ("swiotlb: dynamically allocate io_tlb_default_mem"). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/15259326-209a-1d11-338c-5018dc38abe8@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15swiotlb-xen: arrange to have buffer info loggedJan Beulich1-1/+1
I consider it unhelpful that address and size of the buffer aren't put in the log file; it makes diagnosing issues needlessly harder. The majority of callers of swiotlb_init() also passes 1 for the "verbose" parameter. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/2e3c8e68-36b2-4ae9-b829-bf7f75d39d47@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15swiotlb-xen: drop leftover __refJan Beulich1-1/+1
Commit a98f565462f0 ("xen-swiotlb: split xen_swiotlb_init") should not only have added __init to the split off function, but also should have dropped __ref from the one left. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/7cd163e1-fe13-270b-384c-2708e8273d34@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15swiotlb-xen: limit init retriesJan Beulich1-2/+2
Due to the use of max(1024, ...) there's no point retrying (and issuing bogus log messages) when the number of slabs is already no larger than this minimum value. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/984fa426-2b7b-4b77-5ce8-766619575b7f@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15swiotlb-xen: suppress certain init retriesJan Beulich1-1/+2
Only on the 2nd of the paths leading to xen_swiotlb_init()'s "error" label it is useful to retry the allocation; the first one did already iterate through all possible order values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/56477481-87da-4962-9661-5e1b277efde0@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15swiotlb-xen: maintain slab count properlyJan Beulich1-10/+9
Generic swiotlb code makes sure to keep the slab count a multiple of the number of slabs per segment. Yet even without checking whether any such assumption is made elsewhere, it is easy to see that xen_swiotlb_fixup() might alter unrelated memory when calling xen_create_contiguous_region() for the last segment, when that's not a full one - the function acts on full order-N regions, not individual pages. Align the slab count suitably when halving it for a retry. Add a build time check and a runtime one. Replace the no longer useful local variable "slabs" by an "order" one calculated just once, outside of the loop. Re-use "order" for calculating "dma_bits", and change the type of the latter as well as the one of "i" while touching this anyway. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/dc054cb0-bec4-4db0-fc06-c9fc957b6e66@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15swiotlb-xen: fix late init retryJan Beulich1-2/+2
The commit referenced below removed the assignment of "bytes" from xen_swiotlb_init() without - like done for xen_swiotlb_init_early() - adding an assignment on the retry path, thus leading to excessively sized allocations upon retries. Fixes: 2d29960af0be ("swiotlb: dynamically allocate io_tlb_default_mem") Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/778299d6-9cfd-1c13-026e-25ee5d14ecb3@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15swiotlb-xen: avoid double freeJan Beulich1-1/+0
Of the two paths leading to the "error" label in xen_swiotlb_init() one didn't allocate anything, while the other did already free what was allocated. Fixes: b82776005369 ("xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used") Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/ce9c2adb-8a52-6293-982a-0d6ece943ac6@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15xen/pvcalls: backend can be a moduleJan Beulich1-1/+1
It's not clear to me why only the frontend has been tristate. Switch the backend to be, too. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/54a6070c-92bb-36a3-2fc0-de9ccca438c5@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15xen: fix usage of pmd_populate in mremap for pv guestsJuergen Gross1-2/+5
Commit 0881ace292b662 ("mm/mremap: use pmd/pud_poplulate to update page table entries") introduced a regression when running as Xen PV guest. Today pmd_populate() for Xen PV assumes that the PFN inserted is referencing a not yet used page table. In case of move_normal_pmd() this is not true, resulting in WARN splats like: [34321.304270] ------------[ cut here ]------------ [34321.304277] WARNING: CPU: 0 PID: 23628 at arch/x86/xen/multicalls.c:102 xen_mc_flush+0x176/0x1a0 [34321.304288] Modules linked in: [34321.304291] CPU: 0 PID: 23628 Comm: apt-get Not tainted 5.14.1-20210906-doflr-mac80211debug+ #1 [34321.304294] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010 [34321.304296] RIP: e030:xen_mc_flush+0x176/0x1a0 [34321.304300] Code: 89 45 18 48 c1 e9 3f 48 89 ce e9 20 ff ff ff e8 60 03 00 00 66 90 5b 5d 41 5c 41 5d c3 48 c7 45 18 ea ff ff ff be 01 00 00 00 <0f> 0b 8b 55 00 48 c7 c7 10 97 aa 82 31 db 49 c7 c5 38 97 aa 82 65 [34321.304303] RSP: e02b:ffffc90000a97c90 EFLAGS: 00010002 [34321.304305] RAX: ffff88807d416398 RBX: ffff88807d416350 RCX: ffff88807d416398 [34321.304306] RDX: 0000000000000001 RSI: 0000000000000001 RDI: deadbeefdeadf00d [34321.304308] RBP: ffff88807d416300 R08: aaaaaaaaaaaaaaaa R09: ffff888006160cc0 [34321.304309] R10: deadbeefdeadf00d R11: ffffea000026a600 R12: 0000000000000000 [34321.304310] R13: ffff888012f6b000 R14: 0000000012f6b000 R15: 0000000000000001 [34321.304320] FS: 00007f5071177800(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000 [34321.304322] CS: 10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [34321.304323] CR2: 00007f506f542000 CR3: 00000000160cc000 CR4: 0000000000000660 [34321.304326] Call Trace: [34321.304331] xen_alloc_pte+0x294/0x320 [34321.304334] move_pgt_entry+0x165/0x4b0 [34321.304339] move_page_tables+0x6fa/0x8d0 [34321.304342] move_vma.isra.44+0x138/0x500 [34321.304345] __x64_sys_mremap+0x296/0x410 [34321.304348] do_syscall_64+0x3a/0x80 [34321.304352] entry_SYSCALL_64_after_hwframe+0x44/0xae [34321.304355] RIP: 0033:0x7f507196301a [34321.304358] Code: 73 01 c3 48 8b 0d 76 0e 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 19 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 46 0e 0c 00 f7 d8 64 89 01 48 [34321.304360] RSP: 002b:00007ffda1eecd38 EFLAGS: 00000246 ORIG_RAX: 0000000000000019 [34321.304362] RAX: ffffffffffffffda RBX: 000056205f950f30 RCX: 00007f507196301a [34321.304363] RDX: 0000000001a00000 RSI: 0000000001900000 RDI: 00007f506dc56000 [34321.304364] RBP: 0000000001a00000 R08: 0000000000000010 R09: 0000000000000004 [34321.304365] R10: 0000000000000001 R11: 0000000000000246 R12: 00007f506dc56060 [34321.304367] R13: 00007f506dc56000 R14: 00007f506dc56060 R15: 000056205f950f30 [34321.304368] ---[ end trace a19885b78fe8f33e ]--- [34321.304370] 1 of 2 multicall(s) failed: cpu 0 [34321.304371] call 2: op=12297829382473034410 arg=[aaaaaaaaaaaaaaaa] result=-22 Fix that by modifying xen_alloc_ptpage() to only pin the page table in case it wasn't pinned already. Fixes: 0881ace292b662 ("mm/mremap: use pmd/pud_poplulate to update page table entries") Cc: <stable@vger.kernel.org> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210908073640.11299-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-15xen: reset legacy rtc flag for PV domUJuergen Gross1-0/+7
A Xen PV guest doesn't have a legacy RTC device, so reset the legacy RTC flag. Otherwise the following WARN splat will occur at boot: [ 1.333404] WARNING: CPU: 1 PID: 1 at /home/gross/linux/head/drivers/rtc/rtc-mc146818-lib.c:25 mc146818_get_time+0x1be/0x210 [ 1.333404] Modules linked in: [ 1.333404] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.14.0-rc7-default+ #282 [ 1.333404] RIP: e030:mc146818_get_time+0x1be/0x210 [ 1.333404] Code: c0 64 01 c5 83 fd 45 89 6b 14 7f 06 83 c5 64 89 6b 14 41 83 ec 01 b8 02 00 00 00 44 89 63 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 30 0e ef 82 4c 89 e6 e8 71 2a 24 00 48 c7 c0 ff ff [ 1.333404] RSP: e02b:ffffc90040093df8 EFLAGS: 00010002 [ 1.333404] RAX: 00000000000000ff RBX: ffffc90040093e34 RCX: 0000000000000000 [ 1.333404] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000000000d [ 1.333404] RBP: ffffffff82ef0e30 R08: ffff888005013e60 R09: 0000000000000000 [ 1.333404] R10: ffffffff82373e9b R11: 0000000000033080 R12: 0000000000000200 [ 1.333404] R13: 0000000000000000 R14: 0000000000000002 R15: ffffffff82cdc6d4 [ 1.333404] FS: 0000000000000000(0000) GS:ffff88807d440000(0000) knlGS:0000000000000000 [ 1.333404] CS: 10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.333404] CR2: 0000000000000000 CR3: 000000000260a000 CR4: 0000000000050660 [ 1.333404] Call Trace: [ 1.333404] ? wakeup_sources_sysfs_init+0x30/0x30 [ 1.333404] ? rdinit_setup+0x2b/0x2b [ 1.333404] early_resume_init+0x23/0xa4 [ 1.333404] ? cn_proc_init+0x36/0x36 [ 1.333404] do_one_initcall+0x3e/0x200 [ 1.333404] kernel_init_freeable+0x232/0x28e [ 1.333404] ? rest_init+0xd0/0xd0 [ 1.333404] kernel_init+0x16/0x120 [ 1.333404] ret_from_fork+0x1f/0x30 Cc: <stable@vger.kernel.org> Fixes: 8d152e7a5c7537 ("x86/rtc: Replace paravirt rtc check with platform legacy quirk") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210903084937.19392-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-14PM: base: power: don't try to use non-existing RTC for storing dataJuergen Gross1-0/+10
If there is no legacy RTC device, don't try to use it for storing trace data across suspend/resume. Cc: <stable@vger.kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20210903084937.19392-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-14xen/balloon: use a kernel thread instead a workqueueJuergen Gross1-17/+45
Today the Xen ballooning is done via delayed work in a workqueue. This might result in workqueue hangups being reported in case of large amounts of memory are being ballooned in one go (here 16GB): BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s! Showing busy workqueues and worker pools: workqueue events: flags=0x0 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3 in-flight: 229:balloon_process pending: cache_reap workqueue events_freezable_power_: flags=0x84 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: disk_events_workfn workqueue mm_percpu_wq: flags=0x8 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: vmstat_update pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43 This can easily be avoided by using a dedicated kernel thread for doing the ballooning work. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210827123206.15429-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-01xen: remove stray preempt_disable() from PV AP startup codeJuergen Gross1-1/+0
In cpu_bringup() there is a call of preempt_disable() without a paired preempt_enable(). This is not needed as interrupts are off initially. Additionally this will result in early boot messages like: BUG: scheduling while atomic: swapper/1/0/0x00000002 Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210825113158.11716-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-01xen/pcifront: Removed unnecessary __ref annotationSergio Miguéns Iglesias1-11/+19
An unnecessary "__ref" annotation was removed from the "drivers/pci/xen_pcifront.c" file. The function where the annotation was used was "pcifront_backend_changed()", which does not call any functions annotated as "__*init" nor "__*exit". This makes "__ref" unnecessary since this annotation is used to make the compiler ignore section miss-matches when they are not happening here in the first place. In addition to the aforementioned change, some code style issues were fixed in the same file. Signed-off-by: Sergio Miguéns Iglesias <sergio@lony.xyz> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210830175305.13370-1-sergio@lony.xyz Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-30x86: xen: platform-pci-unplug: use pr_err() and pr_warn() instead of raw printk()zhaoxiao1-7/+9
Since we have the nice helpers pr_err() and pr_warn(), use them instead of raw printk(). [jgross@suse.com] Move the "#define pr_fmt" above the #includes in order to avoid build warnings due to redefinition. Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210825114111.29009-1-zhaoxiao@uniontech.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-30drivers/xen/xenbus/xenbus_client.c: fix bugon.cocci warningsJing Yangyang1-6/+3
Use BUG_ON instead of a if condition followed by BUG. Generated by: scripts/coccinelle/misc/bugon.cocci Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn> Reviewed-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210825062451.69998-1-deng.changcheng@zte.com.cn Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-30xen/blkfront: don't trust the backend response data blindlyJuergen Gross1-17/+53
Today blkfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request. Introduce a new state of the ring BLKIF_STATE_ERROR which will be switched to in case an inconsistency is being detected. Recovering from this state is possible only via removing and adding the virtual device again (e.g. via a suspend/resume cycle). Make all warning messages issued due to valid error responses rate limited in order to avoid message floods being triggered by a malicious backend. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210730103854.12681-4-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-30xen/blkfront: don't take local copy of a request from the ring pageJuergen Gross1-10/+15
In order to avoid a malicious backend being able to influence the local copy of a request build the request locally first and then copy it to the ring page instead of doing it the other way round as today. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210730103854.12681-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-30xen/blkfront: read response from backend only onceJuergen Gross1-17/+18
In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210730103854.12681-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-30xen: assume XENFEAT_gnttab_map_avail_bits being set for pv guestsJuergen Gross1-34/+2
XENFEAT_gnttab_map_avail_bits is always set in Xen 4.0 and newer. Remove coding assuming it might be zero. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210730071804.4302-4-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-30xen: assume XENFEAT_mmu_pt_update_preserve_ad being set for pv guestsJuergen Gross2-12/+4
XENFEAT_mmu_pt_update_preserve_ad is always set in Xen 4.0 and newer. Remove coding assuming it might be zero. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210730071804.4302-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-30xen: check required Xen featuresJuergen Gross1-0/+18
Linux kernel is not supported to run on Xen versions older than 4.0. Add tests for required Xen features always being present in Xen 4.0 and newer. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210730071804.4302-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-30xen: fix setting of max_pfn in shared_infoJuergen Gross1-2/+2
Xen PV guests are specifying the highest used PFN via the max_pfn field in shared_info. This value is used by the Xen tools when saving or migrating the guest. Unfortunately this field is misnamed, as in reality it is specifying the number of pages (including any memory holes) of the guest, so it is the highest used PFN + 1. Renaming isn't possible, as this is a public Xen hypervisor interface which needs to be kept stable. The kernel will set the value correctly initially at boot time, but when adding more pages (e.g. due to memory hotplug or ballooning) a real PFN number is stored in max_pfn. This is done when expanding the p2m array, and the PFN stored there is even possibly wrong, as it should be the last possible PFN of the just added P2M frame, and not one which led to the P2M expansion. Fix that by setting shared_info->max_pfn to the last possible PFN + 1. Fixes: 98dd166ea3a3c3 ("x86/xen/p2m: hint at the last populated P2M entry") Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20210730092622.9973-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-08-29Linux 5.14Linus Torvalds1-1/+1
2021-08-29Revert "parisc: Add assembly implementations for memset, strlen, strcpy, strncpy and strcat"Helge Deller5-157/+74
This reverts commit 83af58f8068ea3f7b3c537c37a30887bfa585069. It turns out that at least the assembly implementation for strncpy() was buggy. Revert the whole commit and return back to the default coding. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.4+ Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-28clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereferenceAdam Ford1-1/+1
The probe was manually passing NULL instead of dev to devm_clk_hw_register. This caused a Unable to handle kernel NULL pointer dereference error. Fix this by passing 'dev'. Signed-off-by: Adam Ford <aford173@gmail.com> Fixes: a20a40a8bbc2 ("clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-27virtio-mem: fix sleeping in RCU read side section in virtio_mem_online_page_cb()David Hildenbrand1-1/+8
virtio_mem_set_fake_offline() might sleep now, and we call it under rcu_read_lock(). To fix it, simply move the rcu_read_unlock() further up, as we're done with the device. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 6cc26d77613a: "virtio-mem: use page_offline_(start|end) when setting PageOffline() Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: virtualization@lists.linux-foundation.org Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-27cryptoloop: add a deprecation warningChristoph Hellwig2-2/+4
Support for cryptoloop has been officially marked broken and deprecated in favor of dm-crypt (which supports the same broken algorithms if needed) in Linux 2.6.4 (released in March 2004), and support for it has been entirely removed from losetup in util-linux 2.23 (released in April 2013). Add a warning and a deprecation schedule. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-27Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"Ulf Hansson1-2/+1
This reverts commit 419dd626e357e89fc9c4e3863592c8b38cfe1571. It turned out that the change from the reverted commit breaks the ACPI based rpi's because it causes the 100Mhz max clock to be overridden to the return from sdhci_iproc_get_max_clock(), which is 0 because there isn't a OF/DT based clock device. Reported-by: Jeremy Linton <jeremy.linton@arm.com> Fixes: 419dd626e357 ("mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711") Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-27usb: gadget: u_audio: fix race condition on endpoint stopJerome Brunet1-4/+4
If the endpoint completion callback is call right after the ep_enabled flag is cleared and before usb_ep_dequeue() is call, we could do a double free on the request and the associated buffer. Fix this by clearing ep_enabled after all the endpoint requests have been dequeued. Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback") Cc: stable <stable@vger.kernel.org> Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-27usb: gadget: f_uac2: fixup feedback endpoint stopJerome Brunet1-4/+11
When the uac2 function is stopped, there seems to be an issue reported on some platforms (Intel Merrifield at least) BUG: kernel NULL pointer dereference, address: 0000000000000008 ... RIP: 0010:dwc3_gadget_del_and_unmap_request+0x19/0xe0 ... Call Trace: dwc3_remove_requests.constprop.0+0x12f/0x170 __dwc3_gadget_ep_disable+0x7a/0x160 dwc3_gadget_ep_disable+0x3d/0xd0 usb_ep_disable+0x1c/0x70 u_audio_stop_capture+0x79/0x120 [u_audio] afunc_set_alt+0x73/0x80 [usb_f_uac2] composite_setup+0x224/0x1b90 [libcomposite] The issue happens only when the gadget is using the sync type "async", not "adaptive". This indicates that problem is coming from the feedback endpoint, which is only used with async synchronization mode. The problem is that request is freed regardless of usb_ep_dequeue(), which ends up badly if the request is not actually dequeued yet. Update the feedback endpoint free function to release the endpoint the same way it is done for the data endpoint, which takes care of the problem. Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support") Reported-by: Ferry Toth <ftoth@exalondelft.nl> Tested-by: Ferry Toth <ftoth@exalondelft.nl> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210827075853.266912-1-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-27pd: fix a NULL vs IS_ERR() checkDan Carpenter1-1/+1
blk_mq_alloc_disk() returns error pointers, it doesn't return NULL so correct the check. Fixes: 262d431f9000 ("pd: use blk_mq_alloc_disk and blk_cleanup_disk") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210827100023.GB9449@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-27PCI/MSI: Skip masking MSI-X on Xen PVMarek Marczykowski-Górecki1-0/+3
When running as Xen PV guest, masking MSI-X is a responsibility of the hypervisor. The guest has no write access to the relevant BAR at all - when it tries to, it results in a crash like this: BUG: unable to handle page fault for address: ffffc9004069100c #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0 e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e] e1000_probe+0x41f/0xdb0 [e1000e] local_pci_probe+0x42/0x80 (...) The recently introduced function msix_mask_all() does not check the global variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking of MSI[-X] interrupts. Add the check to make this function XEN PV compatible. Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
2021-08-26Revert "block/mq-deadline: Prioritize high-priority requests"Jens Axboe1-37/+5
This reverts commit fb926032b3209300f9dc454a36b8299582ae545c. Zhen reports that this commit slows down mq-deadline on a 128 thread box, going from 258K IOPS to 170-180K. My testing shows that Optane gen2 IOPS goes from 2.3M IOPS to 1.2M IOPS on a 64 thread box. Looking in detail at the code, the main culprit here is needing to sum percpu counters in the dispatch hot path, leading to very high CPU utilization there. To make matters worse, the code currently needs to sum 2 percpu counters, and it does so in the most naive way of iterating possible CPUs _twice_. Since we're close to release, revert this commit and we can re-do it with regular per-priority counters instead for the 5.15 kernel. Link: https://lore.kernel.org/linux-block/20210826144039.2143-1-thunder.leizhen@huawei.com/ Reported-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-26Revert "net: really fix the build..."Kalle Valo6-30/+8
This reverts commit ce78ffa3ef1681065ba451cfd545da6126f5ca88. Wren and Nicolas reported that ath11k was failing to initialise QCA6390 Wi-Fi 6 device with error: qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22 Commit ce78ffa3ef16 ("net: really fix the build..."), introduced in v5.14-rc5, caused this regression in qrtr. Most likely all ath11k devices are broken, but I only tested QCA6390. Let's revert the broken commit so that ath11k works again. Reported-by: Wren Turkal <wt@penguintechs.org> Reported-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26sched: Fix get_push_task() vs migrate_disable()Sebastian Andrzej Siewior1-0/+3
push_rt_task() attempts to move the currently running task away if the next runnable task has migration disabled and therefore is pinned on the current CPU. The current task is retrieved via get_push_task() which only checks for nr_cpus_allowed == 1, but does not check whether the task has migration disabled and therefore cannot be moved either. The consequence is a pointless invocation of the migration thread which correctly observes that the task cannot be moved. Return NULL if the task has migration disabled and cannot be moved to another CPU. Fixes: a7c81556ec4d3 ("sched: Fix migrate_disable() vs rt/dl balancing") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210826133738.yiotqbtdaxzjsnfj@linutronix.de
2021-08-26media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()Andy Shevchenko1-1/+1
The commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") moved adev assignment outside of error path and hence made acpi_dev_put(sensor->adev) a no-op. We still need to drop reference count on error path, and to achieve that, replace sensor->adev by locally assigned adev. Fixes: 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") Depends-on: fc68f42aa737 ("ACPI: fix NULL pointer dereference") Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-26net: hns3: fix get wrong pfc_en when query PFC configurationGuangbin Huang1-11/+2
Currently, when query PFC configuration by dcbtool, driver will return PFC enable status based on TC. As all priorities are mapped to TC0 by default, if TC0 is enabled, then all priorities mapped to TC0 will be shown as enabled status when query PFC setting, even though some priorities have never been set. for example: $ dcb pfc show dev eth0 pfc-cap 4 macsec-bypass off delay 0 prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off $ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on $ dcb pfc show dev eth0 pfc-cap 4 macsec-bypass off delay 0 prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on To fix this problem, just returns user's PFC config parameter saved in driver. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: fix GRO configuration error after resetYufeng Mo4-10/+30
The GRO configuration is enabled by default after reset. This is incorrect and should be restored to the user-configured value. So this restoration is added during reset initialization. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: change the method of getting cmd index in debugfsYufeng Mo2-7/+8
Currently, the cmd index is obtained in debugfs by comparing file names. However, this method may cause errors when processing more complex file names. So, change this method by saving cmd in private data and comparing it when getting cmd index in debugfs for optimization. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: fix duplicate node in VLAN listGuojia Liao1-1/+5
VLAN list should not be added duplicate VLAN node, otherwise it would cause "add failed" when restore VLAN from VLAN list, so this patch adds VLAN ID check before adding node into VLAN list. Fixes: c6075b193462 ("net: hns3: Record VF vlan tables") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: fix speed unknown issue in bond 4Yonglong Liu3-3/+3
In bond 4, when the link goes down and up repeatedly, the bond may get an unknown speed, and then this port can not work. The driver notify netif_carrier_on() before update the link state, when the bond receive carrier on, will query the speed of the port, if the query operation happens before updating the link state, will get an unknown speed. So need to notify netif_carrier_on() after update the link state. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: hns3: add waiting time before cmdq memory is releasedYufeng Mo4-2/+13
After the cmdq registers are cleared, the firmware may take time to clear out possible left over commands in the cmdq. Driver must release cmdq memory only after firmware has completed processing of left over commands. Fixes: 232d0d55fca6 ("net: hns3: uninitialize command queue while unloading PF driver") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.