aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-sqlite.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-04-29clk: imx: keep uart clock on during system bootJacky Bai1-0/+16
Keep uart clocks enabled when earlyprintk or earlycon is active. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-29clk: imx: correct i.MX7D AV PLL num/denom offsetAnson Huang3-10/+24
According reference manual, i.MX7D's audio/video PLL's num/denom register offset are 0x20/0x30, they are different from i.MX6's audio/video PLL, correct it by introducing new offset variables for audio/video PLL and using runtime assignment based on PLL type. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: imx6sll: Fix mispelling uart4_serial as serailLeonard Crestez1-1/+1
This looks like a copy-paste error. This string is not referenced anywhere so it's safe to rename it. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: imx: pll14xx: drop unused variablePeng Fan1-4/+2
It does not make sense to only get value from pll->base and assign to a local variable when recalc_rate. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-15clk: imx: rename clk-imx51-imx53.c to clk-imx5.cShawn Guo2-1/+1
As the driver is handling all i.MX5 series SoCs inlcuding i.MX50, rather than just i.MX51 and i.MX53, let's rename it to clk-imx5.c. Signed-off-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org>
2019-04-03clk: imx5: Fix i.MX50 ESDHC clock registersJonathan Neuschäfer1-10/+30
The MUX bits for esdhc_{a,c,d}_sel are shifted by one bit within CSCMR1, because esdhc_b_sel (ESDHC3_CLK_SEL in the Reference Manual) is extended by one bit. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-03clk: imx5: Fix i.MX50 mainbus clock registersJonathan Neuschäfer1-4/+15
i.MX50 does not have a periph_apm clock. Instead, the main bus clock (a.k.a. periph_clk) comes directly from a MUX between pll1_sw, pll2_sw, pll3_sw, and lp_apm. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-26clk: imx: Remove unused imx_get_clk_hw_fixedAbel Vesa1-5/+0
This is never used and the imx_clk_hw_fixed does the same thing. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20dt-bindings: clock: imx7ulp: remove SNVS clockAnson Huang1-1/+0
Since i.MX7ULP B0 chip, SNVS module is moved into M4 domain, so remove it from Linux clock table. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20clk: imx7ulp: remove snvs clockAnson Huang1-1/+0
Since i.MX7ULP B0 chip, the SNVS module is moved into M4 domain and its clock is also moved into PCC0 which is contorlled by M4, Linux kernel should NOT add it into clock tree. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-17Linux 5.1-rc1Linus Torvalds1-2/+2
2019-03-17perf/x86/intel: Make dev_attr_allow_tsx_force_abort statickbuild test robot1-1/+1
Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
2019-03-17kconfig: remove stale lxdialog/.gitignoreMasahiro Yamada1-4/+0
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: force all architectures except um to include mandatory-yMasahiro Yamada29-47/+18
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: warn redundant generic-yMasahiro Yamada12-13/+6
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17Revert "modsign: Abort modules_install when signing fails"Douglas Anderson1-1/+1
This reverts commit caf6fe91ddf62a96401e21e9b7a07227440f4185. The commit was fine but is no longer needed as of commit 3a2429e1faf4 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.com Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: Make NOSTDINC_FLAGS a simply expanded variableDouglas Anderson1-1/+1
During a simple no-op (nothing changed) build I saw 39 invocations of the C compiler with the argument "-print-file-name=include". We don't need to call the C compiler 39 times for this--one time will suffice. Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid this since there doesn't appear to be any reason it should be recursively expanded. On my build this shaved ~400 ms off my "no-op" build. Note that the recursive expansion seems to date back to the (really old) commit e8f5bdb02ce0 ("[PATCH] Makefile include path ordering"). It's a little unclear to me if the point of that patch was to switch the variable to be recursively expanded (which it did) or to avoid directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because someone else (out of tree?) was setting it. I presume later since if the only goal was to switch to recursive expansion the patch would have just removed the ":". Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: deb-pkg: avoid implicit effectsArseny Maslennikov1-1/+4
* The man page for dpkg-source(1) notes: > -b, --build directory [format-specific-parameters] > Build a source package (--build since dpkg 1.17.14). > <...> > > dpkg-source will build the source package with the first > format found in this ordered list: the format indicated > with the --format command line option, the format > indicated in debian/source/format, “1.0”. The fallback > to “1.0” is deprecated and will be removed at some point > in the future, you should always document the desired > source format in debian/source/format. See section > SOURCE PACKAGE FORMATS for an extensive description of > the various source package formats. Thus it would be more foolproof to explicitly use 1.0 (as we always did) than to rely on dpkg-source's defaults. * In a similar vein, debian/rules is not made executable by mkdebian, and dpkg-source warns about that but still silently fixes the file. Let's be explicit once again. Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>