Age | Commit message (Collapse) | Author | Files | Lines |
|
The function drm_crtc_arm_vblank_event should be used for the driver
which have vblank interrupt support. In case of vmwgfx we do not have
vblank interrupt.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
When display surface is different than the framebuffer surface, atomic
path do not copy the surface data. This commit moved the code to copy
surface from legacy to atomic path.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
In case of page flip there is no need to iterate over all display unit
in the function "vmw_kms_helper_dirty". If crtc is available then
dirty commands is performed on that crtc only.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
The adreno driver stopped building when CONFIG_DEBUGFS is disabled:
drivers/gpu/drm/msm/adreno/adreno_device.c: In function 'adreno_load_gpu':
drivers/gpu/drm/msm/adreno/adreno_device.c:153:16: error: 'const struct msm_gpu_funcs' has no member named 'debugfs_init'
if (gpu->funcs->debugfs_init) {
^~
drivers/gpu/drm/msm/adreno/adreno_device.c:154:13: error: 'const struct msm_gpu_funcs' has no member named 'debugfs_init'
gpu->funcs->debugfs_init(gpu, dev->primary);
^~
This adds an #ifdef around the code that references the hidden
pointer.
Fixes: 331dc0bc195b ("drm/msm: add a5xx specific debugfs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
If there is only a single DSI interface, don't reserve the first two
layer-mixers for the dual-DSI use-case.
This was causing problems for WB, not being able to assign a LM, on
8x16, which has only two LM's and a single DSI.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
For some reason, layer-mixer 3 and 4 were missing. LM3 is used for
writeback on 8x16.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
For DSI cmd-mode and writeback, we need to write the CTL's START
register to kick things off, but we only want to do that once both
the encoder and the crtc have a chance to write their corresponding
flush bits. The difficulty is that when there is a full modeset
(ie. encoder state has changed) we want to defer the start until
encoder->enable(). But if only plane's have changed, we want to do
this from crtc->commit().
The start_mask was a previous attempt to handle this, but it didn't
really do the right thing since atomic conversion.
Instead track in the crtc state that the start should be deferred,
set to try from encoder's (or in future writeback's) atomic_check().
This way the state is part of the atomic state, and rollback can
work properly if an atomic test fails.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Interrupt commands causes the CP to trigger an interrupt as the command
is processed, regardless of the GPU being done processing previous
commands. This is seen by the interrupt being delivered before the
fence is written on 8974 and is likely the cause of the additional
CP_WAIT_FOR_IDLE workaround found for a306, which would cause the CP to
wait for the GPU to go idle before triggering the interrupt.
Instead we can set the (undocumented) BIT(31) of the CACHE_FLUSH_TS
which will cause a special CACHE_FLUSH_TS interrupt to be triggered from
the GPU as the write event is processed.
Add CACHE_FLUSH_TS to the IRQ masks of A3xx and A4xx and remove the
workaround for A306.
Suggested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This should be using drm_gem_object_put(). Also since this is done only
in driver unload path, we don't need to synchronize setting tx_gem_obj
to NULL, so juse use the _unlocked() variant.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Remnants of pre-dma_fence fencing which got left behind by mistake.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Since new display controller is called "dpu" instead of "mdp". Lets
make the name of the toplevel directory for the display controllers a
bit more generic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
|
|
_dev_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference.
Fix this by moving the pointer dereference after _dev_ has been
null checked.
Fixes: d4e7f38d70ef ("drm/msm/dsi: check msm_dsi and dsi pointers before use")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
_minor_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference. Fix this by moving the pointer
dereference after _minor_ has been null checked.
Fixes: 024ad8df763f ("drm/msm: add a5xx specific debugfs")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
These callbacks allow the exporter to swap in and pin the backing
storage for buffers as well as invalidate the cache in preparation for
accessing the buffer from the CPU, and flush the cache and unpin the
backing storage when the CPU is done modifying the buffer.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When allocating pages, map them with the DMA API in order to invalidate
caches. This is the correct usage of the API and works just as well as
faking up the SG table and using the dma_sync_sg_for_device() function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Rather than subclass the global atomic state to store the hub display
clock and rate, create a private object and store this data in its
state.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Even though we default PRE_VEGA support to 'n' upstream in amd-staging
we want to keep it enabled by default.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Refine commit f49e9bac191b ("drm/amd/pp: Get and save Rv smu version")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes static checker warning caused by
"36cc549d5986: "drm/amd/display: disable CRTCs with
NULL FB on their primary plane (V2)"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
bad case won't follow normal sense, it will not enable vga1 as usual, but vga2,3,4 is on.
Signed-off-by: Clark Zheng <clark.zheng@amd.com>
Reviewed-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
and amdgpu_bo_create_reserved.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of relying on the tiling attached to a buffer object, make sure
to set the proper tiling for linear buffers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Pass the list of valid format modifiers to planes upon initialization
and implement the ->format_mod_supported() callback so that userspace
can query for the valid combinations of formats and modifiers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Turning off the sink in this case causes various issues, because
userspace expects it to stay on until it turns it off explicitly.
Instead, turn the sink off and back on when a display is connected
again. This dance seems necessary for link training to work correctly.
Bugzilla: https://bugs.freedesktop.org/105308
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
hw ip smu8 was used on CZ/ST,
so use smu8 as the prefix of the function/struct name in powerplay.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Removes unneeded void * casts for the following pointers:
hwmgr->backend
hwmgr->smu_backend
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. delete cz_clockpowergating.c/.h files
2. mark uvd/vce dpm/pg functions static
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
make it symmetric with amdgpu_ucode_init_bo in amd_powerplay.c
refine the "commit b22558bb4ff8fc9fe925222f90297d7a03a5fb20"
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. delete amdgpu_powerplay.c used for wrapping smu ip functions
2. delete struct pp_instance,
3. make struct hwmgr as the smu hw handle.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Powerplay is for the hw ip smu, for RV, smu10 is used,
so use smu10 as the prefix of the files name/function name.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
caused by "commit dcefb7668e5b4fb56099b16d1790cd3056322b03"
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In send_message_to_smu helper functions,
Print out the error code for debug if smu failed to response.
The helper functions always return true, so no need to
check their return value.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. There is a race condition when another ip also use same register pairs
2. check once at boot up by GetDriverIfVersion message is sufficient
to check SMU health. so delete is_smc_ram_running check.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smu7_smumgr.h should not be included in rv and vega, The common functions
for all smu7 asics are put in smu_smumgr.c.
Not include cgs interface in smumgr.c. the code used cgs interface has been
deleted.
Not include smu_ucode_xfer_vi.h in rv/vega
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Free the backend structure if we fail to allocate device memory.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
AVFS feature support/not support is enough to driver.
so remove the complex define of the avfs btc state.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reusing local handle to initialize BO without resetting it to
NULL is wrong since it causes amdgpu_bo_create_reserved to skip
new BO creation and just reuse the given pointer for pinning.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Older Tegra's do not support RGBA format for the cursor, but instead
overlay plane could be used for it. Since there is no much use for the
overlays on a regular desktop and HW-accelerated cursor is much better
than a SW cursor, let's dedicate one overlay plane to the mouse cursor.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This function is not used outside of the file and can be static.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|