aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-sqlite.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-08-21drm/amdgpu: prevent memory leaks in AMDGPU_CS ioctlNicolai Hähnle1-2/+7
Error out if the AMDGPU_CS ioctl is called with multiple SYNCOBJ_OUT and/or TIMELINE_SIGNAL chunks, since otherwise the last chunk wins while the allocated array as well as the reference counts of sync objects are leaked. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-21drm/amd/amdgpu: disable MMHUB PG for navi10Kenneth Feng1-1/+0
Disable MMHUB PG for navi10 according to the production requirement. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-21drm/amd/powerplay: remove duplicate macro smu_get_uclk_dpm_states in amdgpu_smu.hKevin Wang1-2/+0
remove duplicate macro smu_get_uclk_dpm_states in amdgpu_smu.h " #define smu_get_uclk_dpm_states(smu, clocks_in_khz, num_states) \ ((smu)->ppt_funcs->get_uclk_dpm_states ? (smu)->ppt_funcs->get_uclk_dpm_states((smu), (clocks_in_khz), (num_states)) : 0) #define smu_get_max_sustainable_clocks_by_dc(smu, max_clocks) \ ((smu)->funcs->get_max_sustainable_clocks_by_dc ? (smu)->funcs->get_max_sustainable_clocks_by_dc((smu), (max_clocks)) : 0) #define smu_get_uclk_dpm_states(smu, clocks_in_khz, num_states) \ ((smu)->ppt_funcs->get_uclk_dpm_states ? (smu)->ppt_funcs->get_uclk_dpm_states((smu), (clocks_in_khz), (num_states)) : 0) " Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-21drm/amd/powerplay: fix variable type errors in smu_v11_0_setup_pptableKevin Wang1-1/+3
fix size type errors, from uint32_t to uint16_t. it will cause only initializes the highest 16 bits in smu_get_atom_data_table function. bug report: This fixes the following static checker warning. drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:390 smu_v11_0_setup_pptable() warn: passing casted pointer '&size' to 'smu_get_atom_data_table()' 32 vs 16. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-21drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possibleAlex Deucher2-5/+4
We need to set certain power gating flags after we determine if the firmware version is sufficient to support gfxoff. Previously we set the pg flags in early init, but we later we might have disabled gfxoff if the firmware versions didn't support it. Move adding the additional pg flags after we determine whether or not to support gfxoff. Fixes: 005440066f92 ("drm/amdgpu: enable gfxoff again on raven series (v2)") Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Tom St Denis <tom.stdenis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org
2019-08-21drm/i915: Fix HW readout for crtc_clock in HDMI modeImre Deak2-3/+3
The conversion during HDMI HW readout from port_clock to crtc_clock was missed when HDMI 10bpc support was added, so fix that. v2: - Unscrew the non-HDMI case. Fixes: cd9e11a8bf25 ("drm/i915/icl: Add 10-bit support for hdmi") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109593 Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808162547.7009-1-imre.deak@intel.com (cherry picked from commit 2969a78aead38b49e80c821a5c683544ab16160d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-08-19drm/mediatek: mtk_drm_drv.c: Add of_node_put() before gotoNishka Dasgupta1-1/+4
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto in two places. Issue found with Coccinelle. Fixes: 119f5173628a (drm/mediatek: Add DRM Driver for Mediatek SoC MT8173) Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-08-18Linux 5.3-rc5Linus Torvalds1-1/+1
2019-08-17MAINTAINERS: Fix Hyperv vIOMMU driver file nameLan Tianyu1-1/+1
The Hyperv vIOMMU file name should be "hyperv-iommu.c" rather than "hyperv_iommu.c". This patch is to fix it. Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17tools: hv: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in the trace header file related to Microsoft Hyper-V client drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17tools: hv: fix typos in toolchainAdrian Vladu4-6/+6
Fix typos in the HyperV toolchain. Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17tools: hv: fix KVP and VSS daemons exit codeAdrian Vladu2-0/+4
HyperV KVP and VSS daemons should exit with 0 when the '--help' or '-h' flags are used. Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17tools: hv: fixed Python pep8/flake8 warnings for lsvmbusAdrian Vladu1-33/+42
Fixed pep8/flake8 python style code for lsvmbus tool. The TAB indentation was on purpose ignored (pep8 rule W191) to make sure the code is complying with the Linux code guideline. The following command doe not show any warnings now: pep8 --ignore=W191 lsvmbus flake8 --ignore=W191 lsvmbus Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-16arm64: ftrace: Ensure module ftrace trampoline is coherent with I-sideWill Deacon1-9/+13
The initial support for dynamic ftrace trampolines in modules made use of an indirect branch which loaded its target from the beginning of a special section (e71a4e1bebaf7 ("arm64: ftrace: add support for far branches to dynamic ftrace")). Since no instructions were being patched, no cache maintenance was needed. However, later in be0f272bfc83 ("arm64: ftrace: emit ftrace-mod.o contents through code") this code was reworked to output the trampoline instructions directly into the PLT entry but, unfortunately, the necessary cache maintenance was overlooked. Add a call to __flush_icache_range() after writing the new trampoline instructions but before patching in the branch to the trampoline. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: James Morse <james.morse@arm.com> Cc: <stable@vger.kernel.org> Fixes: be0f272bfc83 ("arm64: ftrace: emit ftrace-mod.o contents through code") Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-08-16drm: rcar_lvds: Fix dual link mode operationsJacopo Mondi1-4/+2
The R-Car LVDS encoder units support dual-link operations by splitting the pixel output between the primary encoder and the companion encoder. Currently the companion encoder fails at probe time, causing the registration of the primary to fail as well, preventing the whole DU unit from being registered at all. Fix this by not bailing out from probe with error if the "renesas,companion" property is not specified. Fixes: fa440d870358 ("drm: rcar-du: lvds: Add support for dual-link mode") Reported-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-08-16x86/boot: Save fields explicitly, zero out everything elseJohn Hubbard1-15/+48
Recent gcc compilers (gcc 9.1) generate warnings about an out of bounds memset, if the memset goes accross several fields of a struct. This generated a couple of warnings on x86_64 builds in sanitize_boot_params(). Fix this by explicitly saving the fields in struct boot_params that are intended to be preserved, and zeroing all the rest. [ tglx: Tagged for stable as it breaks the warning free build there as well ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190731054627.5627-2-jhubbard@nvidia.com
2019-08-15ALSA: usb-audio: Fix a stack buffer overflow bug in check_input_termHui Peng1-8/+27
`check_input_term` recursively calls itself with input from device side (e.g., uac_input_terminal_descriptor.bCSourceID) as argument (id). In `check_input_term`, if `check_input_term` is called with the same `id` argument as the caller, it triggers endless recursive call, resulting kernel space stack overflow. This patch fixes the bug by adding a bitmap to `struct mixer_build` to keep track of the checked ids and stop the execution if some id has been checked (similar to how parse_audio_unit handles unitid argument). Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Hui Peng <benquike@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-15io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer listJackie Liu1-7/+9
This patch may fix two issues: First, when IOSQE_IO_DRAIN set, the next IOs need to be inserted into defer list to delay execution, but link io will be actively scheduled to run by calling io_queue_sqe. Second, when multiple LINK_IOs are inserted together with defer_list, the LINK_IO is no longer keep order. |-------------| | LINK_IO | ----> insert to defer_list ----------- |-------------| | | LINK_IO | ----> insert to defer_list ----------| |-------------| | | LINK_IO | ----> insert to defer_list ----------| |-------------| | | NORMAL_IO | ----> insert to defer_list ----------| |-------------| | | queue_work at same time <-----| Fixes: 9e645e1105c ("io_uring: add support for sqe links") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15block: remove REQ_NOWAIT_INLINEJens Axboe3-54/+8
We had a few issues with this code, and there's still a problem around how we deal with error handling for chained/split bios. For now, just revert the code and we'll try again with a thoroug solution. This reverts commits: e15c2ffa1091 ("block: fix O_DIRECT error handling for bio fragments") 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") 893a1c97205a ("blk-mq: allow REQ_NOWAIT to return an error inline") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15io_uring: fix manual setup of iov_iter for fixed buffersAleix Roca Nonell1-3/+1
Commit bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers") introduced an optimization to avoid using the slow iov_iter_advance by manually populating the iov_iter iterator in some cases. However, the computation of the iterator count field was erroneous: The first bvec was always accounted for an extent of page size even if the bvec length was smaller. In consequence, some I/O operations on fixed buffers were unable to operate on the full extent of the buffer, consistently skipping some bytes at the end of it. Fixes: bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers") Cc: stable@vger.kernel.org Signed-off-by: Aleix Roca Nonell <aleix.rocanonell@bsc.es> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15misc: xilinx-sdfec: fix dependency and build errorRandy Dunlap1-0/+1
lib/devres.c, which implements devm_ioremap_resource(), is only built when CONFIG_HAS_IOMEM is set/enabled, so XILINX_SDFEC should depend on HAS_IOMEM. Fixes this build error (as seen on UML builds): ERROR: "devm_ioremap_resource" [drivers/misc/xilinx_sdfec.ko] undefined! Fixes: 76d83e1c3233 ("misc: xilinx-sdfec: add core driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Derek Kiernan <derek.kiernan@xilinx.com> Cc: Dragan Cvetic <dragan.cvetic@xilinx.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/f9004be5-9925-327b-3ec2-6506e46fe565@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: add a hcd_uses_dma helperChristoph Hellwig5-11/+10
The USB buffer allocation code is the only place in the usb core (and in fact the whole kernel) that uses is_device_dma_capable, while the URB mapping code uses the uses_dma flag in struct usb_bus. Switch the buffer allocation to use the uses_dma flag used by the rest of the USB code, and create a helper in hcd.h that checks this flag as well as the CONFIG_HAS_DMA to simplify the caller a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190811080520.21712-3-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: don't create dma pools for HCDs with a localmem_poolChristoph Hellwig1-3/+3
If the HCD provides a localmem pool we will never use the DMA pools, so don't create them. Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory") Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190811080520.21712-2-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: chipidea: imx: fix EPROBE_DEFER support during driver probeAndré Draszik1-7/+12
If driver probe needs to be deferred, e.g. because ci_hdrc_add_device() isn't ready yet, this driver currently misbehaves badly: a) success is still reported to the driver core (meaning a 2nd probe attempt will never be done), leaving the driver in a dysfunctional state and the hardware unusable b) driver remove / shutdown OOPSes: [ 206.786916] Unable to handle kernel paging request at virtual address fffffdff [ 206.794148] pgd = 880b9f82 [ 206.796890] [fffffdff] *pgd=abf5e861, *pte=00000000, *ppte=00000000 [ 206.803179] Internal error: Oops: 37 [#1] PREEMPT SMP ARM [ 206.808581] Modules linked in: wl18xx evbug [ 206.813308] CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 4.19.35+gf345c93b4195 #1 [ 206.821053] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 206.826813] PC is at ci_hdrc_remove_device+0x4/0x20 [ 206.831699] LR is at ci_hdrc_imx_remove+0x20/0xe8 [ 206.836407] pc : [<805cd4b0>] lr : [<805d62cc>] psr: 20000013 [ 206.842678] sp : a806be40 ip : 00000001 fp : 80adbd3c [ 206.847906] r10: 80b1b794 r9 : 80d5dfe0 r8 : a8192c44 [ 206.853136] r7 : 80db93a0 r6 : a8192c10 r5 : a8192c00 r4 : a93a4a00 [ 206.859668] r3 : 00000000 r2 : a8192ce4 r1 : ffffffff r0 : fffffdfb [ 206.866201] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 206.873341] Control: 10c5387d Table: a9e0c06a DAC: 00000051 [ 206.879092] Process systemd-shutdow (pid: 1, stack limit = 0xb271353c) [ 206.885624] Stack: (0xa806be40 to 0xa806c000) [ 206.889992] be40: a93a4a00 805d62cc a8192c1c a8170e10 a8192c10 8049a490 80d04d08 00000000 [ 206.898179] be60: 00000000 80d0da2c fee1dead 00000000 a806a000 00000058 00000000 80148b08 [ 206.906366] be80: 01234567 80148d8c a9858600 00000000 00000000 00000000 00000000 80d04d08 [ 206.914553] bea0: 00000000 00000000 a82741e0 a9858600 00000024 00000002 a9858608 00000005 [ 206.922740] bec0: 0000001e 8022c058 00000000 00000000 a806bf14 a9858600 00000000 a806befc [ 206.930927] bee0: a806bf78 00000000 7ee12c30 8022c18c a806bef8 a806befc 00000000 00000001 [ 206.939115] bf00: 00000000 00000024 a806bf14 00000005 7ee13b34 7ee12c68 00000004 7ee13f20 [ 206.947302] bf20: 00000010 7ee12c7c 00000005 7ee12d04 0000000a 76e7dc00 00000001 80d0f140 [ 206.955490] bf40: ab637880 a974de40 60000013 80d0f140 ab6378a0 80d04d08 a8080470 a9858600 [ 206.963677] bf60: a9858600 00000000 00000000 8022c24c 00000000 80144310 00000000 00000000 [ 206.971864] bf80: 80101204 80d04d08 00000000 80d04d08 00000000 00000000 00000003 00000058 [ 206.980051] bfa0: 80101204 80101000 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 206.988237] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 206.996425] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 60000030 fee1dead 00000000 00000000 [ 207.004622] [<805cd4b0>] (ci_hdrc_remove_device) from [<805d62cc>] (ci_hdrc_imx_remove+0x20/0xe8) [ 207.013509] [<805d62cc>] (ci_hdrc_imx_remove) from [<8049a490>] (device_shutdown+0x16c/0x218) [ 207.022050] [<8049a490>] (device_shutdown) from [<80148b08>] (kernel_restart+0xc/0x50) [ 207.029980] [<80148b08>] (kernel_restart) from [<80148d8c>] (sys_reboot+0xf4/0x1f0) [ 207.037648] [<80148d8c>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54) [ 207.045308] Exception stack(0xa806bfa8 to 0xa806bff0) [ 207.050368] bfa0: 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 207.058554] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 207.066737] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 [ 207.071799] Code: ebffffa8 e3a00000 e8bd8010 e92d4010 (e5904004) [ 207.078021] ---[ end trace be47424e3fd46e9f ]--- [ 207.082647] Kernel panic - not syncing: Fatal exception [ 207.087894] ---[ end Kernel panic - not syncing: Fatal exception ]--- c) the error path in combination with driver removal causes imbalanced calls to the clk_*() and pm_()* APIs a) happens because the original intended return value is overwritten (with 0) by the return code of regulator_disable() in ci_hdrc_imx_probe()'s error path b) happens because ci_pdev is -EPROBE_DEFER, which causes ci_hdrc_remove_device() to OOPS Fix a) by being more careful in ci_hdrc_imx_probe()'s error path and not overwriting the real error code Fix b) by calling the respective cleanup functions during remove only when needed (when ci_pdev != NULL, i.e. when everything was initialised correctly). This also has the side effect of not causing imbalanced clk_*() and pm_*() API calls as part of the error code path. Fixes: 7c8e8909417e ("usb: chipidea: imx: add HSIC support") Signed-off-by: André Draszik <git@andred.net> Cc: stable <stable@vger.kernel.org> CC: Peter Chen <Peter.Chen@nxp.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Pengutronix Kernel Team <kernel@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: NXP Linux Team <linux-imx@nxp.com> CC: linux-usb@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190810150758.17694-1-git@andred.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: host: fotg2: restart hcd after port resetHans Ulli Kroll1-0/+4
On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset. Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15USB: CDC: fix sanity checks in CDC union parserOliver Neukum1-2/+2
A few checks checked for the size of the pointer to a structure instead of the structure itself. Copy & paste issue presumably. Fixes: e4c6fb7794982 ("usbnet: move the CDC parser into USB core") Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: cdc-acm: make sure a refcount is taken early enoughOliver Neukum1-5/+7
destroy() will decrement the refcount on the interface, so that it needs to be taken so early that it never undercounts. Fixes: 7fb57a019f94e ("USB: cdc-acm: Fix potential deadlock (lockdep warning)") Cc: stable <stable@vger.kernel.org> Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15USB: serial: option: add the BroadMobi BM818 cardBob Ham1-0/+2
Add a VID:PID for the BroadMobi BM818 M.2 card T: Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2060 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Bob Ham <bob.ham@puri.sm> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Cc: stable <stable@vger.kernel.org> [ johan: use USB_DEVICE_INTERFACE_CLASS() ] Signed-off-by: Johan Hovold <johan@kernel.org>
2019-08-15USB: serial: option: Add Motorola modem UARTsTony Lindgren1-0/+5
On Motorola Mapphone devices such as Droid 4 there are five USB ports that do not use the same layout as Gobi 1K/2K/etc devices listed in qcserial.c. So we should use qcaux.c or option.c as noted by Dan Williams <dan.j.williams@intel.com>. As the Motorola USB serial ports have an interrupt endpoint as shown with lsusb -v, we should use option.c instead of qcaux.c as pointed out by Johan Hovold <johan@kernel.org>. The ff/ff/ff interfaces seem to always be UARTs on Motorola devices. For the other interfaces, class 0x0a (CDC Data) should not in general be added as they are typically part of a multi-interface function as noted earlier by Bjørn Mork <bjorn@mork.no>. However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a class is only used for flashing the modem firmware, and there are no other interfaces. So I've added that too with more details below as it works just fine. The ttyUSB ports on Droid 4 are: ttyUSB0 DIAG, CQDM-capable ttyUSB1 MUX or NMEA, no response ttyUSB2 MUX or NMEA, no response ttyUSB3 TCMD ttyUSB4 AT-capable The ttyUSB0 is detected as QCDM capable by ModemManager. I think it's only used for debugging with ModemManager --debug for sending custom AT commands though. ModemManager already can manage data connection using the USB QMI ports that are already handled by the qmi_wwan.c driver. To enable the MUX or NMEA ports, it seems that something needs to be done additionally to enable them, maybe via the DIAG or TCMD port. It might be just a NVRAM setting somewhere, but I have no idea what NVRAM settings may need changing for that. The TCMD port seems to be a Motorola custom protocol for testing the modem and to configure it's NVRAM and seems to work just fine based on a quick test with a minimal tcmdrw tool I wrote. The voice modem AT-capable port seems to provide only partial support, and no PM support compared to the TS 27.010 based UART wired directly to the modem. The UARTs added with this change are the same product IDs as the Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't have any mdm9600 based devices, so I have only tested these on mdm6600 based droid 4. Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android Linux kernel driver moto_flashqsc.c just seems to change the port->bulk_out_size to 8K from the default. And is only used for flashing the modem firmware it seems. I've verified that flashing the modem with signed firmware works just fine with the option driver after manually toggling the GPIO pins, so I've added droid 4 modem flashing mode to the option driver. I've not added the other devices listed in moto_flashqsc.c in case they really need different port->bulk_out_size. Those can be added as they get tested to work for flashing the modem. After this patch the output of /sys/kernel/debug/usb/devices has the following for normal 22b8:2a70 mode including the related qmi_wwan interfaces: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=2a70 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8b(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8d(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms In 22b8:900e "qc_dload" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=900e Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms And in 22b8:4281 "ram_downloader" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=4281 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Cc: Bjørn Mork <bjorn@mork.no> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Lars Melin <larsm17@gmail.com> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-08-15MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.hTony Luck1-0/+7
There are a few different subsystems in the kernel that depend on model specific behaviour (perf, EDAC, power, ...). Easier for just one person to have the task to get new model numbers included instead of having these groups trip over each other to do it. [ bp: s/Cpu/CPU/ and add x86@kernel.org so that it gets CCed too as FYI. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190814234030.30817-1-tony.luck@intel.com
2019-08-15drm/nouveau: Only recalculate PBN/VCPI on mode/connector changesLyude Paul1-9/+13
I -thought- I had fixed this entirely, but it looks like that I didn't test this thoroughly enough as we apparently still make one big mistake with nv50_msto_atomic_check() - we don't handle the following scenario: * CRTC #1 has n VCPI allocated to it, is attached to connector DP-4 which is attached to encoder #1. enabled=y active=n * CRTC #1 is changed from DP-4 to DP-5, causing: * DP-4 crtc=#1→NULL (VCPI n→0) * DP-5 crtc=NULL→#1 * CRTC #1 steals encoder #1 back from DP-4 and gives it to DP-5 * CRTC #1 maintains the same mode as before, just with a different connector * mode_changed=n connectors_changed=y (we _SHOULD_ do VCPI 0→n here, but don't) Once the above scenario is repeated once, we'll attempt freeing VCPI from the connector that we didn't allocate due to the connectors changing, but the mode staying the same. Sigh. Since nv50_msto_atomic_check() has broken a few times now, let's rethink things a bit to be more careful: limit both VCPI/PBN allocations to mode_changed || connectors_changed, since neither VCPI or PBN should ever need to change outside of routing and mode changes. Changes since v1: * Fix accidental reversal of clock and bpp arguments in drm_dp_calc_pbn_mode() - William Lewis Signed-off-by: Lyude Paul <lyude@redhat.com> Reported-by: Bohdan Milar <bmilar@redhat.com> Tested-by: Bohdan Milar <bmilar@redhat.com> Fixes: 232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST") References: 412e85b60531 ("drm/nouveau: Only release VCPI slots on mode changes") Cc: Lyude Paul <lyude@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: <stable@vger.kernel.org> # v5.1+ Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190809005307.18391-1-lyude@redhat.com
2019-08-15drm/ast: Fixed reboot test may cause system hangedY.C. Chen3-3/+6
There is another thread still access standard VGA I/O while loading drm driver. Disable standard VGA I/O decode to avoid this issue. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.com
2019-08-14of: irq: fix a trivial typo in a doc commentLubomir Rintel1-1/+1
Diverged from what the code does with commit 530210c7814e ("of/irq: Replace of_irq with of_phandle_args"). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Rob Herring <robh@kernel.org>
2019-08-14dt-bindings: pinctrl: stm32: Fix 'st,syscfg' schemaRob Herring1-1/+2
The proper way to add additional contraints to an existing json-schema is using 'allOf' to reference the base schema. Using just '$ref' doesn't work. Fix this for the 'st,syscfg' property. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-08-15drm/mediatek: set DMA max segment sizeAlexandre Courbot2-2/+35
This driver requires imported PRIME buffers to appear contiguously in its IO address space. Make sure this is the case by setting the maximum DMA segment size to a more suitable value than the default 64KB. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-08-15drm/mediatek: use correct device to import PRIME buffersAlexandre Courbot1-1/+13
PRIME buffers should be imported using the DMA device. To this end, use a custom import function that mimics drm_gem_prime_import_dev(), but passes the correct device. Fixes: 119f5173628aa ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-08-14drm/scheduler: use job count instead of peekChristian König1-2/+2
The spsc_queue_peek function is accessing queue->head which belongs to the consumer thread and shouldn't be accessed by the producer This is fixing a rare race condition when destroying entities. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Monk.liu@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-14riscv: Make __fstate_clean() work correctly.Vincent Chen1-1/+1
Make the __fstate_clean() function correctly set the state of sstatus.FS in pt_regs to SR_FS_CLEAN. Fixes: 7db91e57a0acd ("RISC-V: Task implementation") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> [paul.walmsley@sifive.com: expanded "Fixes" commit ID] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-14riscv: Correct the initialized flow of FP registerVincent Chen2-2/+15
The following two reasons cause FP registers are sometimes not initialized before starting the user program. 1. Currently, the FP context is initialized in flush_thread() function and we expect these initial values to be restored to FP register when doing FP context switch. However, the FP context switch only occurs in switch_to function. Hence, if this process does not be scheduled out and scheduled in before entering the user space, the FP registers have no chance to initialize. 2. In flush_thread(), the state of reg->sstatus.FS inherits from the parent. Hence, the state of reg->sstatus.FS may be dirty. If this process is scheduled out during flush_thread() and initializing the FP register, the fstate_save() in switch_to will corrupt the FP context which has been initialized until flush_thread(). To solve the 1st case, the initialization of the FP register will be completed in start_thread(). It makes sure all FP registers are initialized before starting the user program. For the 2nd case, the state of reg->sstatus.FS in start_thread will be set to SR_FS_OFF to prevent this process from corrupting FP context in doing context save. The FP state is set to SR_FS_INITIAL in start_trhead(). Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixes: 7db91e57a0acd ("RISC-V: Task implementation") Cc: stable@vger.kernel.org [paul.walmsley@sifive.com: fixed brace alignment issue reported by checkpatch] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-14ALSA: usb-audio: Fix an OOB bug in parse_audio_mixer_unitHui Peng1-0/+2
The `uac_mixer_unit_descriptor` shown as below is read from the device side. In `parse_audio_mixer_unit`, `baSourceID` field is accessed from index 0 to `bNrInPins` - 1, the current implementation assumes that descriptor is always valid (the length of descriptor is no shorter than 5 + `bNrInPins`). If a descriptor read from the device side is invalid, it may trigger out-of-bound memory access. ``` struct uac_mixer_unit_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDescriptorSubtype; __u8 bUnitID; __u8 bNrInPins; __u8 baSourceID[]; } ``` This patch fixes the bug by add a sanity check on the length of the descriptor. Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Peng <benquike@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-14i2c: stm32: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header file related to STM32 Driver for I2C hardware bus support. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-14i2c: emev2: avoid race when unregistering slave clientWolfram Sang1-4/+12
After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: c31d0a00021d ("i2c: emev2: add slave support") Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-14i2c: rcar: avoid race when unregistering slave clientWolfram Sang1-4/+7
After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: de20d1857dd6 ("i2c: rcar: add slave support") Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-14MAINTAINERS: i2c-imx: take over maintainershipOleksij Rempel1-0/+8
I would like to maintain the i2c-imx driver. Since I work with different i.MX variants and have access to the hardware, I can spend some time on the reviewing of this driver. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-14Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"Fabio Estevam1-12/+6
Since commit e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") when booting with the DMA driver as module (such as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen: [ 153.077831] ------------[ cut here ]------------ [ 153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24 [ 153.093077] i2c0 already disabled [ 153.096416] Modules linked in: [ 153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G W 5.2.0+ #321 [ 153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 153.113772] Workqueue: events deferred_probe_work_func [ 153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>] (show_stack+0x10/0x14) [ 153.126778] [<c0014734>] (show_stack) from [<c083f8dc>] (dump_stack+0x9c/0xd4) [ 153.134051] [<c083f8dc>] (dump_stack) from [<c0031154>] (__warn+0xf8/0x124) [ 153.141056] [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48) [ 153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>] (clk_core_disable_lock+0x18/0x24) [ 153.157413] [<c040fde0>] (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec) [ 153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>] (platform_drv_probe+0x48/0x98) [ 153.174297] [<c04b9178>] (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0) [ 153.182605] [<c04b7298>] (really_probe) from [<c04b7554>] (driver_probe_device+0x5c/0x174) [ 153.190909] [<c04b7554>] (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c) [ 153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>] (__device_attach+0xa0/0x108) [ 153.207782] [<c04b746c>] (__device_attach) from [<c04b65a4>] (bus_probe_device+0x88/0x90) [ 153.215999] [<c04b65a4>] (bus_probe_device) from [<c04b6a04>] (deferred_probe_work_func+0x60/0x90) [ 153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>] (process_one_work+0x204/0x634) [ 153.234178] [<c004f190>] (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484) [ 153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>] (kthread+0x118/0x150) [ 153.249758] [<c0055c2c>] (kthread) from [<c00090b4>] (ret_from_fork+0x14/0x20) [ 153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8) [ 153.262095] 3fa0: 00000000 00000000 00000000 00000000 [ 153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 153.285159] irq event stamp: 3323022 [ 153.288787] hardirqs last enabled at (3323021): [<c0861c4c>] _raw_spin_unlock_irq+0x24/0x2c [ 153.297261] hardirqs last disabled at (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124 [ 153.305392] softirqs last enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540 [ 153.313352] softirqs last disabled at (3322081): [<c00385c0>] irq_exit+0x10c/0x128 [ 153.320946] ---[ end trace a506731ccd9bd703 ]--- This endless clk warnings behaviour is well explained by Andrey Smirnov: "Allocating DMA after registering I2C adapter can lead to infinite probing loop, for example, consider the following scenario: 1. i2c_imx_probe() is called and successfully registers an I2C adapter via i2c_add_numbered_adapter() 2. As a part of i2c_add_numbered_adapter() new I2C slave devices are added from DT which results in a call to driver_deferred_probe_trigger() 3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which due to lack of proper DMA driver returns -EPROBE_DEFER 4. i2c_imx_probe() fails, removes I2C adapter and returns -EPROBE_DEFER, which places it into deferred probe list 5. Deferred probe work triggered in #2 above kicks in and calls i2c_imx_probe() again thus bringing us to step #1" So revert commit e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") and restore the old behaviour, in order to avoid regressions on existing setups. Cc: <stable@vger.kernel.org> Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reported-by: Russell King <linux@armlinux.org.uk> Fixes: e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-14ALSA: hda - Add a generic reboot_notifyHui Wang4-15/+22
Make codec enter D3 before rebooting or poweroff can fix the noise issue on some laptops. And in theory it is harmless for all codecs to enter D3 before rebooting or poweroff, let us add a generic reboot_notify, then realtek and conexant drivers can call this function. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-14ALSA: hda - Let all conexant codec enter D3 when rebootingHui Wang1-9/+0
We have 3 new lenovo laptops which have conexant codec 0x14f11f86, these 3 laptops also have the noise issue when rebooting, after letting the codec enter D3 before rebooting or poweroff, the noise disappers. Instead of adding a new ID again in the reboot_notify(), let us make this function apply to all conexant codec. In theory make codec enter D3 before rebooting or poweroff is harmless, and I tested this change on a couple of other Lenovo laptops which have different conexant codecs, there is no side effect so far. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-13riscv: defconfig: Update the defconfigAlistair Francis1-0/+2
Update the defconfig: - Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable VirtIORNG when running on QEMU Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-13riscv: rv32_defconfig: Update the defconfigAlistair Francis1-0/+3
Update the rv32_defconfig: - Add 'CONFIG_DEVTMPFS_MOUNT=y' to match the RISC-V defconfig - Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable VirtIORNG when running on QEMU Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-13hugetlbfs: fix hugetlb page migration/fault race causing SIGBUSMike Kravetz1-0/+19
Li Wang discovered that LTP/move_page12 V2 sometimes triggers SIGBUS in the kernel-v5.2.3 testing. This is caused by a race between hugetlb page migration and page fault. If a hugetlb page can not be allocated to satisfy a page fault, the task is sent SIGBUS. This is normal hugetlbfs behavior. A hugetlb fault mutex exists to prevent two tasks from trying to instantiate the same page. This protects against the situation where there is only one hugetlb page, and both tasks would try to allocate. Without the mutex, one would fail and SIGBUS even though the other fault would be successful. There is a similar race between hugetlb page migration and fault. Migration code will allocate a page for the target of the migration. It will then unmap the original page from all page tables. It does this unmap by first clearing the pte and then writing a migration entry. The page table lock is held for the duration of this clear and write operation. However, the beginnings of the hugetlb page fault code optimistically checks the pte without taking the page table lock. If clear (as it can be during the migration unmap operation), a hugetlb page allocation is attempted to satisfy the fault. Note that the page which will eventually satisfy this fault was already allocated by the migration code. However, the allocation within the fault path could fail which would result in the task incorrectly being sent SIGBUS. Ideally, we could take the hugetlb fault mutex in the migration code when modifying the page tables. However, locks must be taken in the order of hugetlb fault mutex, page lock, page table lock. This would require significant rework of the migration code. Instead, the issue is addressed in the hugetlb fault code. After failing to allocate a huge page, take the page table lock and check for huge_pte_none before returning an error. This is the same check that must be made further in the code even if page allocation is successful. Link: http://lkml.kernel.org/r/20190808000533.7701-1-mike.kravetz@oracle.com Fixes: 290408d4a250 ("hugetlb: hugepage migration core") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Li Wang <liwang@redhat.com> Tested-by: Li Wang <liwang@redhat.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Cyril Hrubis <chrubis@suse.cz> Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.