| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SCMI virtio transport device managed allocations must use the main
platform device in devres operations instead of the channel devices.
Cc: Peter Hilber <peter.hilber@opensynergy.com>
Fixes: 46abe13b5e3d ("firmware: arm_scmi: Add virtio transport")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
SCMI Rx channels are optional and they can fail to be setup when not
present but anyway channels setup routines must bail-out on memory errors.
Make channels setup, and related probing, fail when memory errors are
reported on Rx channels.
Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
SCMI transports based on shared memory, at start of transmissions, have
to wait for the shared Tx channel area to be eventually freed by the
SCMI platform before accessing the channel. In fact the channel is owned
by the SCMI platform until marked as free by the platform itself and,
as such, cannot be used by the agent until relinquished.
As a consequence a badly misbehaving SCMI platform firmware could lock
the channel indefinitely and make the kernel side SCMI stack loop
forever waiting for such channel to be freed, possibly hanging the
whole boot sequence.
Add a timeout to the existent Tx waiting spin-loop so that, when the
system ends up in this situation, the SCMI stack can at least bail-out,
nosily warn the user, and abort the transmission.
Reported-by: YaxiongTian <iambestgod@outlook.com>
Suggested-by: YaxiongTian <iambestgod@outlook.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Suppress the capability to unbind the core SCMI driver since all the
SCMI stack protocol drivers depend on it.
Fixes: aa4f886f3893 ("firmware: arm_scmi: add basic driver infrastructure for SCMI")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Platform drivers .remove callbacks are not supposed to fail and report
errors. Such errors are indeed ignored by the core platform drivers
and the driver unbind process is anyway completed.
The SCMI core platform driver as it is now, instead, bails out reporting
an error in case of an explicit unbind request.
Fix the removal path by adding proper device links between the core SCMI
device and the SCMI protocol devices so that a full SCMI stack unbind is
triggered when the core driver is removed. The remove process does not
bail out anymore on the anomalous conditions triggered by an explicit
unbind but the user is still warned.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add Jay Fang as the maintainer of the HiSilicon LPC BUS Driver, replacing
John Garry.
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/20221028105434.1661264-1-f.fangjian@huawei.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Recent changes to the thermal framework has made the trip
points (trips) for thermal zones compulsory, which made
the Ux500 DTS files break validation and also stopped
probing because of similar changes to the code.
Fix this by adding an "outer bounding box": battery thermal
zones should not get warmer than 70 degress, then we will
shut down.
Fixes: 8c596324232d ("dt-bindings: thermal: Fix missing required property")
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Link: https://lore.kernel.org/r/20221030210854.346662-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: 0420dde30a90 ("arm64: dts: ls208xa: add the external MDIO nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: bbe75af7b092 ("arm64: dts: ls1088a: add external MDIO device nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: 6e1b8fae892d ("arm64: dts: lx2160a: add emdio1 node")
Fixes: 5705b9dcda57 ("arm64: dts: lx2160a: add emdio2 node")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In imx93_pd_probe(); if an error occurs, some resources need to be released
as done in the remove function.
Fixes: 0a0f7cc25d4a ("soc: imx: add i.MX93 SRC power domain driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per imx93-pinfunc.h and pinctrl-imx93.c, correct gpio-ranges.
Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support")
Reported-by: David Wolfe <david.wolfe@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per binding doc, interrupt names should be tx and rx.
Fixes: 0dfb380d2492 ("arm64: dts: imx93: add s4 mu node")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Some pgc power-domain requires a parent power domain, so
add an optional power-domains property, otherwise there will be
dt check warning:
gpc@303a0000: pgc:power-domain@1: 'power-domains' does not match
any of the regexes: 'pinctrl-[0-9]+'
Fixes: 30af8513bdb5 ("dt-bindings: power: add defines for i.MX8MM power domains")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per bindings/mmc/fsl-imx-esdhc.yaml, the clock order is ipg, ahb, per,
otherwise warning: "
mmc@5b020000: clock-names:1: 'ahb' was expected
mmc@5b020000: clock-names:2: 'per' was expected "
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix our design flaw in supply voltage distribution on the Quad and QuadPlus
based boards.
The problem is that we supply the SoC cache (VDD_CACHE_CAP) from VDD_PU
instead of VDD_SOC. The VDD_PU internal regulator can be disabled by PM
if VPU or GPU is not used. If that happens the system freezes. To prevent
that configure the reg_pu regulator to be always on.
Fixes: 0de4ab81ab26 ("ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board")
Cc: petrben@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Petr Benes <petr.benes@ysoft.com>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GW5910 and GW5913 have a user pushbutton that is tied to the
Gateworks System Controller GPIO offset 2. Fix the invalid offset of 0.
Fixes: 64bf0a0af18d ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
pgc_otg1 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1 power domain
to the usb phy node.
Fixes: ea2b5af58ab2 ("arm64: dts: imx8mn: put USB controller into power-domains")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
pgc_otg1 is an independent power domain of hsio, it's for usb phy,
so remove hsio power domain from its node.
Fixes: 8b8ebec67360 ("arm64: dts: imx8mn: add GPC node")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
pgc_otg1/2 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1/2 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1/2 power domain
to the usb phy node.
Fixes: 01df28d80859 ("arm64: dts: imx8mm: put USB controllers into power-domains")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
pgc_otg1/2 are independent power domain of hsio, they for usb phy,
so remove hsio power domain dependency from its node.
Fixes: d39d4bb15310 ("arm64: dts: imx8mm: add GPC node")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GPIO signaling ctrl_sleep_moci is currently handled as a gpio hog.
But the gpio-hog node is made a child of the wrong gpio controller.
Move it to the node representing gpio4 so that it actually works.
Without this carrier board components jumpered to use the signal are
unconditionally switched off.
Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
|
|
This reverts commit 72a95859728a7866522e6633818bebc1c2519b17.
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes: 72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.
Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c. But apparently journald-systemd
actually uses this to detect hostname changes.
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Enable CPLD_Dn pull down resistor instead of pull up to avoid
intefering with CPLD power off functionality.
Fixes: 510c527b4ff57 ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Also update the documentation accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Fixes: 17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.
This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes: 1a155254ff937 ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When an extended state component is not present in fpstate, but in init
state, the function copies from init_fpstate via copy_feature().
But, dynamic states are not present in init_fpstate because of all-zeros
init states. Then retrieving them from init_fpstate will explode like this:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:memcpy_erms+0x6/0x10
? __copy_xstate_to_uabi_buf+0x381/0x870
fpu_copy_guest_fpstate_to_uabi+0x28/0x80
kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm]
? __this_cpu_preempt_check+0x13/0x20
? vmx_vcpu_put+0x2e/0x260 [kvm_intel]
kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
? kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
? __fget_light+0xd4/0x130
__x64_sys_ioctl+0xe3/0x910
? debug_smp_processor_id+0x17/0x20
? fpregs_assert_state_consistent+0x27/0x50
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Adjust the 'mask' to zero out the userspace buffer for the features that
are not available both from fpstate and from init_fpstate.
The dynamic features depend on the compacted XSAVE format. Ensure it is
enabled before reading XCOMP_BV in init_fpstate.
Fixes: 2308ee57d93d ("x86/fpu/amx: Enable the AMX feature in 64-bit mode")
Reported-by: Yuan Yao <yuan.yao@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/lkml/BYAPR11MB3717EDEF2351C958F2C86EED95259@BYAPR11MB3717.namprd11.prod.outlook.com/
Link: https://lkml.kernel.org/r/20221021185844.13472-1-chang.seok.bae@intel.com
|
|
When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL
enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder,
causing the stack trace to show all text addresses as unreliable:
# echo l > /proc/sysrq-trigger
[ 477.521031] sysrq: Show backtrace of all active CPUs
[ 477.523813] NMI backtrace for cpu 0
[ 477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 #65
[ 477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
[ 477.526439] Call Trace:
[ 477.526854] <TASK>
[ 477.527216] ? dump_stack_lvl+0xc7/0x114
[ 477.527801] ? dump_stack+0x13/0x1f
[ 477.528331] ? nmi_cpu_backtrace.cold+0xb5/0x10d
[ 477.528998] ? lapic_can_unplug_cpu+0xa0/0xa0
[ 477.529641] ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0
[ 477.530393] ? arch_trigger_cpumask_backtrace+0x1d/0x30
[ 477.531136] ? sysrq_handle_showallcpus+0x1b/0x30
[ 477.531818] ? __handle_sysrq.cold+0x4e/0x1ae
[ 477.532451] ? write_sysrq_trigger+0x63/0x80
[ 477.533080] ? proc_reg_write+0x92/0x110
[ 477.533663] ? vfs_write+0x174/0x530
[ 477.534265] ? handle_mm_fault+0x16f/0x500
[ 477.534940] ? ksys_write+0x7b/0x170
[ 477.535543] ? __x64_sys_write+0x1d/0x30
[ 477.536191] ? do_syscall_64+0x6b/0x100
[ 477.536809] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 477.537609] </TASK>
This happens when the compiled code for show_stack() has a single word
on the stack, and doesn't use a tail call to show_stack_log_lvl().
(CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.) Then the
__unwind_start() skip logic hits an off-by-one bug and fails to unwind
all the way to the intended starting frame.
Fix it by reverting the following commit:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
The original justification for that commit no longer exists. That
original issue was later fixed in a different way, with the following
commit:
f2ac57a4c49d ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels")
Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
[jpoimboe: rewrite commit log]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
The generic EFI stub can be instructed to avoid SetVirtualAddressMap(),
and simply run with the firmware's 1:1 mapping. In this case, it
populates the virtual address fields of the runtime regions in the
memory map with the physical address of each region, so that the mapping
code has to be none the wiser. Only if SetVirtualAddressMap() fails, the
virtual addresses are wiped and the kernel code knows that the regions
cannot be mapped.
However, wiping amounts to setting it to zero, and if a runtime region
happens to live at physical address 0, its valid 1:1 mapped virtual
address could be mistaken for a wiped field, resulting on loss of access
to the EFI services at runtime.
So let's only assume that VA == 0 means 'no runtime services' if the
region in question does not live at PA 0x0.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The linker script symbol definition that captures the size of the
compressed payload inside the zboot decompressor (which is exposed via
the image header) refers to '.' for the end of the region, which does
not give the correct result as the expression is not placed at the end
of the payload. So use the symbol name explicitly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
To stop the bots from sending sparse warnings to me and the list about
efi_main() not having a prototype, decorate it with asmlinkage so that
it is clear that it is called from assembly, and therefore needs to
remain external, even if it is never declared in a header file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit bbc6d2c6ef22 ("efi: vars: Switch to new wrapper layer")
refactored the efivars layer so that the 'business logic' related to
which UEFI variables affect the boot flow in which way could be moved
out of it, and into the efivarfs driver.
This inadvertently broke setting variables on firmware implementations
that lack the QueryVariableInfo() boot service, because we no longer
tolerate a EFI_UNSUPPORTED result from check_var_size() when calling
efivar_entry_set_get_size(), which now ends up calling check_var_size()
a second time inadvertently.
If QueryVariableInfo() is missing, we support writes of up to 64k -
let's move that logic into check_var_size(), and drop the redundant
call.
Cc: <stable@vger.kernel.org> # v6.0
Fixes: bbc6d2c6ef22 ("efi: vars: Switch to new wrapper layer")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Amadeusz reports KASAN use-after-free errors introduced by commit
3881ee0b1edc ("efi: avoid efivars layer when loading SSDTs from
variables"). The problem appears to be that the memory that holds the
new ACPI table is now freed unconditionally, instead of only when the
ACPI core reported a failure to load the table.
So let's fix this, by omitting the kfree() on success.
Cc: <stable@vger.kernel.org> # v6.0
Link: https://lore.kernel.org/all/a101a10a-4fbb-5fae-2e3c-76cf96ed8fbd@linux.intel.com/
Fixes: 3881ee0b1edc ("efi: avoid efivars layer when loading SSDTs from variables")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The zboot decompressor series introduced a feature to sign the PE/COFF
kernel image for secure boot as part of the kernel build. This was
necessary because there are actually two images that need to be signed:
the kernel with the EFI stub attached, and the decompressor application.
This is a bit of a burden, because it means that the images must be
signed on the the same system that performs the build, and this is not
realistic for distros.
During the next cycle, we will introduce changes to the zboot code so
that the inner image no longer needs to be signed. This means that the
outer PE/COFF image can be handled as usual, and be signed later in the
release process.
Let's remove the associated Kconfig options now so that they don't end
up in a LTS release while already being deprecated.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
A splat from kmem_cache_destroy() was seen with a kernel prior to
commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool")
when there was a failure in init_dmars(), because the iommu_domain
cache still had objects. While the mempool code is now gone, there
still is a leak of the si_domain memory if init_dmars() fails. So
clean up si_domain in the init_dmars() error path.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 86080ccc223a ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221010144842.308890-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
arch_rmrr_sanity_check() warns if the RMRR is not covered by an ACPI
Reserved region, but it seems like it should accept an NVS region as
well. The ACPI spec
https://uefi.org/specs/ACPI/6.5/15_System_Address_Map_Interfaces.html
uses similar wording for "Reserved" and "NVS" region types; for NVS
regions it says "This range of addresses is in use or reserved by the
system and must not be used by the operating system."
There is an old comment on this mailing list that also suggests NVS
regions should pass the arch_rmrr_sanity_check() test:
The warnings come from arch_rmrr_sanity_check() since it checks whether
the region is E820_TYPE_RESERVED. However, if the purpose of the check
is to detect RMRR has regions that may be used by OS as free memory,
isn't E820_TYPE_NVS safe, too?
This patch overlaps with another proposed patch that would add the region
type to the log since sometimes the bug reporter sees this log on the
console but doesn't know to include the kernel log:
https://lore.kernel.org/lkml/20220611204859.234975-3-atomlin@redhat.com/
Here's an example of the "Firmware Bug" apparent false positive (wrapped
for line length):
DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR
[0x000000006f760000-0x000000006f762fff], contact BIOS vendor for
fixes
DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR
[0x000000006f760000-0x000000006f762fff]
This is the snippet from the e820 table:
BIOS-e820: [mem 0x0000000068bff000-0x000000006ebfefff] reserved
BIOS-e820: [mem 0x000000006ebff000-0x000000006f9fefff] ACPI NVS
BIOS-e820: [mem 0x000000006f9ff000-0x000000006fffefff] ACPI data
Fixes: f036c7fa0ab6 ("iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved")
Cc: Will Mortensen <will@extrahop.com>
Link: https://lore.kernel.org/linux-iommu/64a5843d-850d-e58c-4fc2-0a0eeeb656dc@nec.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216443
Signed-off-by: Charlotte Tan <charlotte@extrahop.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Link: https://lore.kernel.org/r/20220929044449.32515-1-charlotte@extrahop.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 5f64ce5411b46 ("iommu/vt-d: Duplicate iommu_resv_region objects
per device list") converted rcu_lock in get_resv_regions to
dmar_global_lock to allow sleeping in iommu_alloc_resv_region(). This
introduced possible recursive locking if get_resv_regions is called from
within a section where intel_iommu_init() already holds dmar_global_lock.
Especially, after commit 57365a04c921 ("iommu: Move bus setup to IOMMU
device registration"), below lockdep splats could always be seen.
============================================
WARNING: possible recursive locking detected
6.0.0-rc4+ #325 Tainted: G I
--------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffffa8a18c90 (dmar_global_lock){++++}-{3:3}, at:
intel_iommu_get_resv_regions+0x25/0x270
but task is already holding lock:
ffffffffa8a18c90 (dmar_global_lock){++++}-{3:3}, at:
intel_iommu_init+0x36d/0x6ea
...
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x5f
__lock_acquire.cold.73+0xad/0x2bb
lock_acquire+0xc2/0x2e0
? intel_iommu_get_resv_regions+0x25/0x270
? lock_is_held_type+0x9d/0x110
down_read+0x42/0x150
? intel_iommu_get_resv_regions+0x25/0x270
intel_iommu_get_resv_regions+0x25/0x270
iommu_create_device_direct_mappings.isra.28+0x8d/0x1c0
? iommu_get_dma_cookie+0x6d/0x90
bus_iommu_probe+0x19f/0x2e0
iommu_device_register+0xd4/0x130
intel_iommu_init+0x3e1/0x6ea
? iommu_setup+0x289/0x289
? rdinit_setup+0x34/0x34
pci_iommu_init+0x12/0x3a
do_one_initcall+0x65/0x320
? rdinit_setup+0x34/0x34
? rcu_read_lock_sched_held+0x5a/0x80
kernel_init_freeable+0x28a/0x2f3
? rest_init+0x1b0/0x1b0
kernel_init+0x1a/0x130
ret_from_fork+0x1f/0x30
</TASK>
This rolls back dmar_global_lock to rcu_lock in get_resv_regions to avoid
the lockdep splat.
Fixes: 57365a04c921 ("iommu: Move bus setup to IOMMU device registration")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify
the memory allocation behavior. Thus iommu_alloc_resv_region() could also
be available in critical contexts.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The kvm_riscv_vcpu_timer_pending() checks per-VCPU next_cycles
and per-VCPU software injected VS timer interrupt. This function
returns incorrect value when Sstc is available because the per-VCPU
next_cycles are only updated by kvm_riscv_vcpu_timer_save() called
from kvm_arch_vcpu_put(). As a result, when Sstc is available the
VCPU does not block properly upon WFI traps.
To fix the above issue, we introduce kvm_riscv_vcpu_timer_sync()
which will update per-VCPU next_cycles upon every VM exit instead
of kvm_riscv_vcpu_timer_save().
Fixes: 8f5cb44b1bae ("RISC-V: KVM: Support sstc extension")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
riscv_cbom_block_size and riscv_init_cbom_blocksize() should always
be available and riscv_init_cbom_blocksize() should always be
invoked, even when compiling without RISCV_ISA_ZICBOM enabled. This
is because disabling RISCV_ISA_ZICBOM means "don't use zicbom
instructions in the kernel" not "pretend there isn't zicbom, even
when there is". When zicbom is available, whether the kernel enables
its use with RISCV_ISA_ZICBOM or not, KVM will offer it to guests.
Ensure we can build KVM and that the block size is initialized even
when compiling without RISCV_ISA_ZICBOM.
Fixes: 8f7e001e0325 ("RISC-V: Clean up the Zicbom block size probing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
This fixes maybe_unused warnings/errors.
According to a comment during device tree removal, only ACPI is supported,
thus let's actually require it.
Fixes: be18c5ede25d ("i2c: mlxbf: remove device tree support")
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Commit 16ce101db85d ("mm/memory.c: fix race when faulting a device private
page") changed the migrate_to_ram() callback to take a reference on the
device page to ensure it can't be freed while handling the fault.
Unfortunately the corresponding update to Nouveau to accommodate this
change was inadvertently dropped from that patch causing GPU to CPU
migration to fail so add it here.
Link: https://lkml.kernel.org/r/20221019122934.866205-1-apopple@nvidia.com
Fixes: 16ce101db85d ("mm/memory.c: fix race when faulting a device private page")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
Cristian Marussi
Jay Fang
Linus Walleij
Ioana Ciornei
Christophe JAILLET
Peng Fan
Petr Benes
Tim Harvey
Li Jun
Max Krummenacher
Linus Torvalds
Jason A. Donenfeld
Marek Vasut
Pavel Begunkov
Wilken Gottwalt
Paolo Bonzini
Alexander Graf
Chang S. Bae
Chen Zhongjin
Ard Biesheuvel
Jerry Snitselaar
Charlotte Tan
Lu Baolu
Anup Patel
Andrew Jones
Adam Borowski
Alistair Popple