aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/exported-sql-viewer.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-05-13Bluetooth: btusb: Add 0x0bda:0x8771 Realtek 8761BUV devicesIsmael Luceno1-0/+4
Identifies as just "Realtek Semiconductor Corp. Bluetooth Radio"; it's used in many adapters, e.g.: - UGREEN CM390 - C-TECH BTD-01 - Orico BTA-508 - KS-is KS-457 Device description at /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8771 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C239987 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Ismael Luceno <ismael@iodev.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCAZijun Hu1-0/+1
Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA controllers since they answer HCI_OP_READ_DEF_ERR_DATA_REPORTING with error code "UNKNOWN HCI COMMAND" as shown below: [ 580.517552] Bluetooth: hci0: unexpected cc 0x0c5a length: 1 < 2 [ 580.517660] Bluetooth: hci0: Opcode 0x c5a failed: -38 hcitool -i hci0 cmd 0x03 0x5a < HCI Command: ogf 0x03, ocf 0x005a, plen 0 > HCI Event: 0x0e plen 4 01 5A 0C 01 btmon log: < HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0 > HCI Event: Command Complete (0x0e) plen 4 Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1 Status: Unknown HCI Command (0x01) Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: core: Fix missing power_on work cancel on HCI closeVasyl Vavrychuk2-2/+1
Move power_on work cancel to hci_dev_close_sync to ensure that power_on work is canceled after HCI interface down, power off, rfkill, etc. For example, if hciconfig hci0 down is done early enough during boot, it may run before power_on work. Then, power_on work will actually bring up interface despite above hciconfig command. Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: btusb: add support for Qualcomm WCN785xZijun Hu1-2/+8
Qualcomm WCN785x has PID/VID 0cf3/e700 as shown by /sys/kernel/debug/usb/devices: T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e700 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: protect le accept and resolv lists with hdev->lockNiels Dossche1-0/+12
Concurrent operations from events on le_{accept,resolv}_list are currently unprotected by hdev->lock. Most existing code do already protect the lists with that lock. This can be observed in hci_debugfs and hci_sync. Add the protection for these events too. Fixes: b950aa88638c ("Bluetooth: Add definitions and track LE resolve list modification") Fixes: 0f36b589e4ee ("Bluetooth: Track LE white list modification via HCI commands") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: use hdev lock for accept_list and reject_list in conn reqNiels Dossche1-6/+9
All accesses (both reads and modifications) to hdev->{accept,reject}_list are protected by hdev lock, except the ones in hci_conn_request_evt. This can cause a race condition in the form of a list corruption. The solution is to protect these lists in hci_conn_request_evt as well. I was unable to find the exact commit that introduced the issue for the reject list, I was only able to find it for the accept list. Fixes: a55bd29d5227 ("Bluetooth: Add white list lookup for incoming connection requests") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: use hdev lock in activate_scan for hci_is_adv_monitoringNiels Dossche1-0/+2
hci_is_adv_monitoring's function documentation states that it must be called under the hdev lock. Paths that leads to an unlocked call are: discov_update => start_discovery => interleaved_discov => active_scan and: discov_update => start_discovery => active_scan The solution is to take the lock in active_scan during the duration of the call to hci_is_adv_monitoring. Fixes: c32d624640fd ("Bluetooth: disable filter dup when scan for adv monitor") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: btrtl: Add support for RTL8852CMax Chou1-0/+13
Add the support for RTL8852C BT controller on USB interface. The necessary firmware file will be submitted to linux-firmware. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for QCALuiz Augusto von Dentz1-0/+5
This sets HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for QCA controllers since SCO appear to not work when using HCI_OP_ENHANCED_SETUP_SYNC_CONN. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215576 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: Print broken quirksLuiz Augusto von Dentz1-0/+31
This prints warnings for controllers setting broken quirks to increase their visibility and warn about broken controllers firmware that probably needs updates to behave properly. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: HCI: Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirkLuiz Augusto von Dentz4-4/+17
This adds HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk which can be used to mark HCI_Enhanced_Setup_Synchronous_Connection as broken even if its support command bit are set since some controller report it as supported but the command don't work properly with some configurations (e.g. BT_VOICE_TRANSPARENT/mSBC). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: hci_qca: Use del_timer_sync() before freeingSteven Rostedt1-2/+2
While looking at a crash report on a timer list being corrupted, which usually happens when a timer is freed while still active. This is commonly triggered by code calling del_timer() instead of del_timer_sync() just before freeing. One possible culprit is the hci_qca driver, which does exactly that. Eric mentioned that wake_retrans_timer could be rearmed via the work queue, so also move the destruction of the work queue before del_timer_sync(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Fixes: 0ff252c1976da ("Bluetooth: hciuart: Add support QCA chipset for UART") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: btintel: Constify static struct regmap_busRikard Falkeborn1-1/+1
The only usage of regmap_ibt is to (after the regmap_init() macro is expanded), pass its address to __regmap_init(), which takes a pointer to const struct regmap_bus as input. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: Keep MGMT pending queue ordered FIFOBrian Gix1-1/+1
Small change to add new commands to tail of the list, and find/remove them from the head of the list. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeoutYing Hsu1-8/+13
Connecting the same socket twice consecutively in sco_sock_connect() could lead to a race condition where two sco_conn objects are created but only one is associated with the socket. If the socket is closed before the SCO connection is established, the timer associated with the dangling sco_conn object won't be canceled. As the sock object is being freed, the use-after-free problem happens when the timer callback function sco_sock_timeout() accesses the socket. Here's the call trace: dump_stack+0x107/0x163 ? refcount_inc+0x1c/ print_address_description.constprop.0+0x1c/0x47e ? refcount_inc+0x1c/0x7b kasan_report+0x13a/0x173 ? refcount_inc+0x1c/0x7b check_memory_region+0x132/0x139 refcount_inc+0x1c/0x7b sco_sock_timeout+0xb2/0x1ba process_one_work+0x739/0xbd1 ? cancel_delayed_work+0x13f/0x13f ? __raw_spin_lock_init+0xf0/0xf0 ? to_kthread+0x59/0x85 worker_thread+0x593/0x70e kthread+0x346/0x35a ? drain_workqueue+0x31a/0x31a ? kthread_bind+0x4b/0x4b ret_from_fork+0x1f/0x30 Link: https://syzkaller.appspot.com/bug?extid=2bef95d3ab4daa10155b Reported-by: syzbot+2bef95d3ab4daa10155b@syzkaller.appspotmail.com Fixes: e1dee2c1de2b ("Bluetooth: fix repeated calls to sco_sock_kill") Signed-off-by: Ying Hsu <yinghsu@chromium.org> Reviewed-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: mt7921s: Fix the incorrect pointer checkSean Wang1-1/+1
Fix the incorrect pointer check on ven_data. Fixes: f41b91fa1783 ("Bluetooth: mt7921s: Add .btmtk_get_codec_config_data") Co-developed-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: btbcm: Support per-board firmware variantsLinus Walleij1-1/+51
There are provedly different firmware variants for the different phones using some of these chips. These were extracted from a few Samsung phones: 37446 BCM4334B0.samsung,codina-tmo.hcd 37366 BCM4334B0.samsung,golden.hcd 37403 BCM4334B0.samsung,kyle.hcd 37366 BCM4334B0.samsung,skomer.hcd This patch supports the above naming schedule with inserting [.board_name] between the firmware name and ".hcd". This scheme is the same as used by the companion BRCM wireless chips as can be seen in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c or just by looking at the firmwares in linux-firmware/brcm. Currently we only support board variants using the device tree compatible string as board type, but other schemes are possible. This makes it possible to successfully load a few unique firmware variants for some Samsung phones. Cc: phone-devel@vger.kernel.org Cc: Markuss Broks <markuss.broks@gmail.com> Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13selftests: fib_nexthops: Make the test more robustAmit Cohen1-24/+24
Rarely some of the test cases fail. Make the test more robust by increasing the timeout of ping commands to 5 seconds. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: phy: smsc: Cope with hot-removal in interrupt handlerLukas Wunner1-1/+3
If reading the Interrupt Source Flag register fails with -ENODEV, then the PHY has been hot-removed and the correct response is to bail out instead of throwing a WARN splat and attempting to suspend the PHY. The PHY should be stopped in due course anyway as the kernel asynchronously tears down the device. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: phy: smsc: Cache interrupt maskLukas Wunner1-13/+11
Cache the interrupt mask to avoid re-reading it from the PHY upon every interrupt. This will simplify a subsequent commit which detects hot-removal in the interrupt handler and bails out. Analyzing and debugging PHY transactions also becomes simpler if such redundant reads are avoided. Last not least, interrupt overhead and latency is slightly improved. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid pollingLukas Wunner1-52/+61
Link status of SMSC LAN95xx chips is polled once per second, even though they're capable of signaling PHY interrupts through the MAC layer. Forward those interrupts to the PHY driver to avoid polling. Benefits are reduced bus traffic, reduced CPU overhead and quicker interface bringup. Polling was introduced in 2016 by commit d69d16949346 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation"). Back then, the LAN95xx driver neglected to enable the ENERGYON interrupt, hence couldn't detect link-up events when auto-negotiation was disabled. The proper solution would have been to enable the ENERGYON interrupt instead of polling. Since then, PHY handling was moved from the LAN95xx driver to the SMSC PHY driver with commit 05b35e7eb9a1 ("smsc95xx: add phylib support"). That PHY driver is capable of link detection with auto-negotiation disabled because it enables the ENERGYON interrupt. Note that signaling interrupts through the MAC layer not only works with the integrated PHY, but also with an external PHY, provided its interrupt pin is attached to LAN95xx's nPHY_INT pin. In the unlikely event that the interrupt pin of an external PHY is attached to a GPIO of the SoC (or not connected at all), the driver can be amended to retrieve the irq from the PHY's of_node. To forward PHY interrupts to phylib, it is not sufficient to call phy_mac_interrupt(). Instead, the PHY's interrupt handler needs to run so that PHY interrupts are cleared. That's because according to page 119 of the LAN950x datasheet, "The source of this interrupt is a level. The interrupt persists until it is cleared in the PHY." https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf Therefore, create an IRQ domain with a single IRQ for the PHY. In the future, the IRQ domain may be extended to support the 11 GPIOs on the LAN95xx. Normally the PHY interrupt should be masked until the PHY driver has cleared it. However masking requires a (sleeping) USB transaction and interrupts are received in (non-sleepable) softirq context. I decided not to mask the interrupt at all (by using the dummy_irq_chip's noop ->irq_mask() callback): The USB interrupt endpoint is polled in 1 msec intervals and normally that's sufficient to wake the PHY driver's IRQ thread and have it clear the interrupt. If it does take longer, worst thing that can happen is the IRQ thread is woken again. No big deal. Because PHY interrupts are now perpetually enabled, there's no need to selectively enable them on suspend. So remove all invocations of smsc95xx_enable_phy_wakeup_interrupts(). In smsc95xx_resume(), move the call of phy_init_hw() before usbnet_resume() (which restarts the status URB) to ensure that the PHY is fully initialized when an interrupt is handled. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> # from a PHY perspective Cc: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Avoid link settings race on interrupt receptionLukas Wunner1-7/+9
When a PHY interrupt is signaled, the SMSC LAN95xx driver updates the MAC full duplex mode and PHY flow control registers based on cached data in struct phy_device: smsc95xx_status() # raises EVENT_LINK_RESET usbnet_deferred_kevent() smsc95xx_link_reset() # uses cached data in phydev Simultaneously, phylib polls link status once per second and updates that cached data: phy_state_machine() phy_check_link_status() phy_read_status() lan87xx_read_status() genphy_read_status() # updates cached data in phydev If smsc95xx_link_reset() wins the race against genphy_read_status(), the registers may be updated based on stale data. E.g. if the link was previously down, phydev->duplex is set to DUPLEX_UNKNOWN and that's what smsc95xx_link_reset() will use, even though genphy_read_status() may update it to DUPLEX_FULL afterwards. PHY interrupts are currently only enabled on suspend to trigger wakeup, so the impact of the race is limited, but we're about to enable them perpetually. Avoid the race by delaying execution of smsc95xx_link_reset() until phy_state_machine() has done its job and calls back via smsc95xx_handle_link_change(). Signaling EVENT_LINK_RESET on wakeup is not necessary because phylib picks up link status changes through polling. So drop the declaration of a ->link_reset() callback. Note that the semicolon on a line by itself added in smsc95xx_status() is a placeholder for a function call which will be added in a subsequent commit. That function call will actually handle the INT_ENP_PHY_INT_ interrupt. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Don't reset PHY behind PHY driver's backLukas Wunner1-18/+0
smsc95xx_reset() resets the PHY behind the PHY driver's back, which seems like a bad idea generally. Remove that portion of the function. We're about to use PHY interrupts instead of polling to detect link changes on SMSC LAN95xx chips. Because smsc95xx_reset() is called from usbnet_open(), PHY interrupt settings are lost whenever the net_device is brought up. There are two other callers of smsc95xx_reset(), namely smsc95xx_bind() and smsc95xx_reset_resume(), and both may indeed benefit from a PHY reset. However they already perform one through their calls to phy_connect_direct() and phy_init_hw(). Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Gabriel Hojda <ghojda@yo2urs.ro> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Don't clear read-only PHY interruptLukas Wunner1-4/+0
Upon receiving data from the Interrupt Endpoint, the SMSC LAN95xx driver attempts to clear the signaled interrupts by writing "all ones" to the Interrupt Status Register. However the driver only ever enables a single type of interrupt, namely the PHY Interrupt. And according to page 119 of the LAN950x datasheet, its bit in the Interrupt Status Register is read-only. There's no other way to clear it than in a separate PHY register: https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf Consequently, writing "all ones" to the Interrupt Status Register is pointless and can be dropped. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: Run unregister_netdev() before unbind() againLukas Wunner3-10/+5
Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()") sought to fix a use-after-free on disconnect of USB Ethernet adapters. It turns out that a different fix is necessary to address the issue: https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/ So the commit was not necessary. The commit made binding and unbinding of USB Ethernet asymmetrical: Before, usbnet_probe() first invoked the ->bind() callback and then register_netdev(). usbnet_disconnect() mirrored that by first invoking unregister_netdev() and then ->unbind(). Since the commit, the order in usbnet_disconnect() is reversed and no longer mirrors usbnet_probe(). One consequence is that a PHY disconnected (and stopped) in ->unbind() is afterwards stopped once more by unregister_netdev() as it closes the netdev before unregistering. That necessitates a contortion in ->stop() because the PHY may only be stopped if it hasn't already been disconnected. Reverting the commit allows making the call to phy_stop() unconditional in ->stop(). Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: ethernet: fix platform_no_drv_owner.cocci warningYang Li1-1/+0
Remove .owner field if calls are used which set it automatically. ./drivers/net/ethernet/sunplus/spl2sw_driver.c:569:3-8: No need to set .owner here. The core will do it. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: page_pool: add page allocation stats for two fast page allocate pathJie Wang1-1/+4
Currently If use page pool allocation stats to analysis a RX performance degradation problem. These stats only count for pages allocate from page_pool_alloc_pages. But nic drivers such as hns3 use page_pool_dev_alloc_frag to allocate pages, so page stats in this API should also be counted. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: ethernet: Use swap() instead of open coding itJiapeng Chong1-16/+4
Clean the following coccicheck warning: ./drivers/net/ethernet/sunplus/spl2sw_driver.c:217:27-28: WARNING opportunity for swap(). ./drivers/net/ethernet/sunplus/spl2sw_driver.c:222:27-28: WARNING opportunity for swap(). Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-12net: selftests: Stress reuseport listenMartin KaFai Lau3-0/+132
This patch adds a test that has 300 VIPs listening on port 443. Each VIP:443 will have 80 listening socks by using SO_REUSEPORT. Thus, it will have 24000 listening socks. Before removing the port only listening_hash, all socks will be in the same port 443 bucket and inet_reuseport_add_sock() spends much time to walk through the bucket. After removing the port only listening_hash and move all usage to the port+addr lhash2, each bucket in the ideal case has 80 sk which is much smaller than before. Here is the test result from a qemu: Before: listen 24000 socks took 210.210485362 (~210s) After: listen 24000 socks took 0.207173 (~210ms) Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: inet: Retire port only listening_hashMartin KaFai Lau9-101/+26
The listen sk is currently stored in two hash tables, listening_hash (hashed by port) and lhash2 (hashed by port and address). After commit 0ee58dad5b06 ("net: tcp6: prefer listeners bound to an address") and commit d9fbc7f6431f ("net: tcp: prefer listeners bound to an address"), the TCP-SYN lookup fast path does not use listening_hash. The commit 05c0b35709c5 ("tcp: seq_file: Replace listening_hash with lhash2") also moved the seq_file (/proc/net/tcp) iteration usage from listening_hash to lhash2. There are still a few listening_hash usages left. One of them is inet_reuseport_add_sock() which uses the listening_hash to search a listen sk during the listen() system call. This turns out to be very slow on use cases that listen on many different VIPs at a popular port (e.g. 443). [ On top of the slowness in adding to the tail in the IPv6 case ]. The latter patch has a selftest to demonstrate this case. This patch takes this chance to move all remaining listening_hash usages to lhash2 and then retire listening_hash. Since most changes need to be done together, it is hard to cut the listening_hash to lhash2 switch into small patches. The changes in this patch is highlighted here for the review purpose. 1. Because of the listening_hash removal, lhash2 can use the sk->sk_nulls_node instead of the icsk->icsk_listen_portaddr_node. This will also keep the sk_unhashed() check to work as is after stop adding sk to listening_hash. The union is removed from inet_listen_hashbucket because only nulls_head is needed. 2. icsk->icsk_listen_portaddr_node and its helpers are removed. 3. The current lhash2 users needs to iterate with sk_nulls_node instead of icsk_listen_portaddr_node. One case is in the inet[6]_lhash2_lookup(). Another case is the seq_file iterator in tcp_ipv4.c. One thing to note is sk_nulls_next() is needed because the old inet_lhash2_for_each_icsk_continue() does a "next" first before iterating. 4. Move the remaining listening_hash usage to lhash2 inet_reuseport_add_sock() which this series is trying to improve. inet_diag.c and mptcp_diag.c are the final two remaining use cases and is moved to lhash2 now also. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: inet: Open code inet_hash2 and inet_unhash2Martin KaFai Lau1-55/+33
This patch folds lhash2 related functions into __inet_hash and inet_unhash. This will make the removal of the listening_hash in a latter patch easier to review. First, this patch folds inet_hash2 into __inet_hash. For unhash, the current call sequence is like inet_unhash() => __inet_unhash() => inet_unhash2(). The specific testing cases in __inet_unhash() are mostly related to TCP_LISTEN sk and its caller inet_unhash() already has the TCP_LISTEN test, so this patch folds both __inet_unhash() and inet_unhash2() into inet_unhash(). Note that all listening_hash users also have lhash2 initialized, so the !h->lhash2 check is no longer needed. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: inet: Remove count from inet_listen_hashbucketMartin KaFai Lau2-7/+0
After commit 0ee58dad5b06 ("net: tcp6: prefer listeners bound to an address") and commit d9fbc7f6431f ("net: tcp: prefer listeners bound to an address"), the count is no longer used. This patch removes it. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12sfc/siena: Reinstate SRIOV init/fini function callsMartin Habets2-0/+19
They were removed in the first series since they were not used for EF10. Put that code back for Siena, with the prototypes in siena_sriov.h since that file is a more applicable place for it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12sfc/siena: Make PTP and reset support specific for SienaMartin Habets2-4/+5
Change the clock name and work queue names to differentiate them from the names used in sfc.ko. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12sfc/siena: Make MCDI logging support specific for SienaMartin Habets6-15/+26
Add a Siena Kconfig option and use it in stead of the sfc one. Rename the internal variable for the 'mcdi_logging_default' module parameter to avoid a naming conflict with the one in sfc.ko. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12siena: Make HWMON support specific for SienaMartin Habets4-6/+13
Add a Siena Kconfig option and use it in stead of the sfc one. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12siena: Make SRIOV support specific for SienaMartin Habets13-30/+38
Add a Siena Kconfig option and use it in stead of the sfc one. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12siena: Make MTD support specific for SienaMartin Habets9-13/+21
Add a Siena Kconfig option and use it in stead of the sfc one. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: mscc: ocelot: move ocelot_port_private :: chip_port to ocelot_port :: indexVladimir Oltean4-39/+41
Currently the ocelot switch lib is unaware of the index of a struct ocelot_port, since that is kept in the encapsulating structures of outer drivers (struct dsa_port :: index, struct ocelot_port_private :: chip_port). With the upcoming increase in complexity associated with assigning DSA tag_8021q CPU ports to certain user ports, it becomes necessary for the switch lib to be able to retrieve the index of a certain ocelot_port. Therefore, introduce a new u8 to ocelot_port (same size as the chip_port used by the ocelot switchdev driver) and rework the existing code to populate and use it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: mscc: ocelot: minimize holes in struct ocelot_portVladimir Oltean1-9/+11
Reorder members of struct ocelot_port to eliminate holes and reduce structure size. Pahole says: Before: struct ocelot_port { struct ocelot * ocelot; /* 0 8 */ struct regmap * target; /* 8 8 */ bool vlan_aware; /* 16 1 */ /* XXX 7 bytes hole, try to pack */ const struct ocelot_bridge_vlan * pvid_vlan; /* 24 8 */ unsigned int ptp_skbs_in_flight; /* 32 4 */ u8 ptp_cmd; /* 36 1 */ /* XXX 3 bytes hole, try to pack */ struct sk_buff_head tx_skbs; /* 40 96 */ /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */ u8 ts_id; /* 136 1 */ /* XXX 3 bytes hole, try to pack */ phy_interface_t phy_mode; /* 140 4 */ bool is_dsa_8021q_cpu; /* 144 1 */ bool learn_ena; /* 145 1 */ /* XXX 6 bytes hole, try to pack */ struct net_device * bond; /* 152 8 */ bool lag_tx_active; /* 160 1 */ /* XXX 1 byte hole, try to pack */ u16 mrp_ring_id; /* 162 2 */ /* XXX 4 bytes hole, try to pack */ struct net_device * bridge; /* 168 8 */ int bridge_num; /* 176 4 */ u8 stp_state; /* 180 1 */ /* XXX 3 bytes hole, try to pack */ int speed; /* 184 4 */ /* size: 192, cachelines: 3, members: 18 */ /* sum members: 161, holes: 7, sum holes: 27 */ /* padding: 4 */ }; After: struct ocelot_port { struct ocelot * ocelot; /* 0 8 */ struct regmap * target; /* 8 8 */ struct net_device * bond; /* 16 8 */ struct net_device * bridge; /* 24 8 */ const struct ocelot_bridge_vlan * pvid_vlan; /* 32 8 */ phy_interface_t phy_mode; /* 40 4 */ unsigned int ptp_skbs_in_flight; /* 44 4 */ struct sk_buff_head tx_skbs; /* 48 96 */ /* --- cacheline 2 boundary (128 bytes) was 16 bytes ago --- */ u16 mrp_ring_id; /* 144 2 */ u8 ptp_cmd; /* 146 1 */ u8 ts_id; /* 147 1 */ u8 stp_state; /* 148 1 */ bool vlan_aware; /* 149 1 */ bool is_dsa_8021q_cpu; /* 150 1 */ bool learn_ena; /* 151 1 */ bool lag_tx_active; /* 152 1 */ /* XXX 3 bytes hole, try to pack */ int bridge_num; /* 156 4 */ int speed; /* 160 4 */ /* size: 168, cachelines: 3, members: 18 */ /* sum members: 161, holes: 1, sum holes: 3 */ /* padding: 4 */ /* last cacheline: 40 bytes */ }; Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: mscc: ocelot: delete ocelot_port :: xmit_templateVladimir Oltean1-1/+0
This is no longer used since commit 7c4bb540e917 ("net: dsa: tag_ocelot: create separate tagger for Seville"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: dsa: felix: reimplement tagging protocol change with function pointersVladimir Oltean2-197/+216
The error handling for the current tagging protocol change procedure is a bit brittle (we dismantle the previous tagging protocol entirely before setting up the new one). By identifying which parts of a tagging protocol are unique to itself and which parts are shared with the other, we can implement a protocol change procedure where error handling is a bit more robust, because we start setting up the new protocol first, and tear down the old one only after the setup of the specific and shared parts succeeded. The protocol change is a bit too open-coded too, in the area of migrating host flood settings and MDBs. By identifying what differs between tagging protocols (the forwarding masks for host flooding) we can implement a more straightforward migration procedure which is handled in the shared portion of the protocol change, rather than individually by each protocol. Therefore, a more structured approach calls for the introduction of a structure of function pointers per tagging protocol. This covers setup, teardown and the host forwarding mask. In the future it will also cover how to prepare for a new DSA master. The initial tagging protocol setup (at driver probe time) and the final teardown (at driver removal time) are also adapted to call into the structured methods of the specific protocol in current use. This is especially relevant for teardown, where we previously called felix_del_tag_protocol() only for the first CPU port. But by not specifying which CPU port this is for, we gain more flexibility to support multiple CPU ports in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: dsa: felix: dynamically determine tag_8021q CPU port for trapsVladimir Oltean1-9/+17
Ocelot switches support a single active CPU port at a time (at least as a trapping destination, i.e. for control traffic). This is true regardless of whether we are using the native copy-to-CPU-port-module functionality, or a redirect action towards the software-defined tag_8021q CPU port. Currently we assume that the trapping destination in tag_8021q mode is the first CPU port, yet in the future we may want to migrate the user ports to the second CPU port. For that to work, we need to make sure that the tag_8021q trapping destination is a CPU port that is active, i.e. is used by at least some user port on which the trap was added. Otherwise, we may end up redirecting the traffic to a CPU port which isn't even up. Note that due to the current design where we simply choose the CPU port of the first port from the trap's ingress port mask, it may be that a CPU port absorbes control traffic from user ports which aren't affine to it as per user space's request. This isn't ideal, but is the lesser of two evils. Following the user-configured affinity for traps would mean that we can no longer reuse a single TCAM entry for multiple traps, which is what we actually do for e.g. PTP. Either we duplicate and deduplicate TCAM entries on the fly when user-to-CPU-port mappings change (which is unnecessarily complicated), or we redirect trapped traffic to all tag_8021q CPU ports if multiple such ports are in use. The latter would have actually been nice, if it actually worked, but it doesn't, since a OCELOT_MASK_MODE_REDIRECT action towards multiple ports would not take PGID_SRC into consideration, and it would just duplicate the packet towards each (CPU) port, leading to duplicates in software. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: dsa: remove port argument from ->change_tag_protocol()Vladimir Oltean6-51/+46
DSA has not supported (and probably will not support in the future either) independent tagging protocols per CPU port. Different switch drivers have different requirements, some may need to replicate some settings for each CPU port, some may need to apply some settings on a single CPU port, while some may have to configure some global settings and then some per-CPU-port settings. In any case, the current model where DSA calls ->change_tag_protocol for each CPU port turns out to be impractical for drivers where there are global things to be done. For example, felix calls dsa_tag_8021q_register(), which makes no sense per CPU port, so it suppresses the second call. Let drivers deal with replication towards all CPU ports, and remove the CPU port argument from the function prototype. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: dsa: felix: manage host flooding using a specific driver callbackVladimir Oltean6-30/+51
At the time - commit 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") - not introducing a dedicated switch callback for host flooding made sense, because for the only user, the felix driver, there was nothing different to do for the CPU port than set the flood flags on the CPU port just like on any other bridge port. There are 2 reasons why this approach is not good enough, however. (1) Other drivers, like sja1105, support configuring flooding as a function of {ingress port, egress port}, whereas the DSA ->port_bridge_flags() function only operates on an egress port. So with that driver we'd have useless host flooding from user ports which don't need it. (2) Even with the felix driver, support for multiple CPU ports makes it difficult to piggyback on ->port_bridge_flags(). The way in which the felix driver is going to support host-filtered addresses with multiple CPU ports is that it will direct these addresses towards both CPU ports (in a sort of multicast fashion), then restrict the forwarding to only one of the two using the forwarding masks. Consequently, flooding will also be enabled towards both CPU ports. However, ->port_bridge_flags() gets passed the index of a single CPU port, and that leaves the flood settings out of sync between the 2 CPU ports. This is to say, it's better to have a specific driver method for host flooding, which takes the user port as argument. This solves problem (1) by allowing the driver to do different things for different user ports, and problem (2) by abstracting the operation and letting the driver do whatever, rather than explicitly making the DSA core point to the CPU port it thinks needs to be touched. This new method also creates a problem, which is that cross-chip setups are not handled. However I don't have hardware right now where I can test what is the proper thing to do, and there isn't hardware compatible with multi-switch trees that supports host flooding. So it remains a problem to be tackled in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: dsa: introduce the dsa_cpu_ports() helperVladimir Oltean1-0/+11
Similar to dsa_user_ports() which retrieves a port mask of all user ports, introduce dsa_cpu_ports() which retrieves the mask of all CPU ports of a switch. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: dsa: felix: bring the NPI port indirection for host flooding to surfaceVladimir Oltean2-3/+3
For symmetry with host FDBs and MDBs where the indirection is now handled outside the ocelot switch lib, do the same for bridge port flags (unicast/multicast/broadcast flooding). The only caller of the ocelot switch lib which uses the NPI port is the Felix DSA driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: dsa: felix: bring the NPI port indirection for host MDBs to surfaceVladimir Oltean2-6/+6
For symmetry with host FDBs where the indirection is now handled outside the ocelot switch lib, do the same for host MDB entries. The only caller of the ocelot switch lib which uses the NPI port is the Felix DSA driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: dsa: felix: program host FDB entries towards PGID_CPU for tag_8021q tooVladimir Oltean2-8/+11
I remembered why we had the host FDB migration procedure in place. It is true that host FDB entry migration can be done by changing the value of PGID_CPU, but the problem is that only host FDB entries learned while operating in NPI mode go to PGID_CPU. When the CPU port operates in tag_8021q mode, the FDB entries are learned towards the unicast PGID equal to the physical port number of this CPU port, bypassing the PGID_CPU indirection. So host FDB entries learned in tag_8021q mode are not migrated any longer towards the NPI port. Fix this by extracting the NPI port -> PGID_CPU redirection from the ocelot switch lib, moving it to the Felix DSA driver, and applying it for any CPU port regardless of its kind (NPI or tag_8021q). Fixes: a51c1c3f3218 ("net: dsa: felix: stop migrating FDBs back and forth on tag proto change") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: lan966x: Fix use of pointer after being freedHoratiu Vultur1-2/+2
The smatch found the following warning: drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c:736 lan966x_fdma_reload() warn: 'rx_dcbs' was already freed. This issue can happen when changing the MTU on one of the ports and once the RX buffers are allocated and then the TX buffer allocation fails. In that case the RX buffers should not be restore. This fix this issue such that the RX buffers will not be restored if the TX buffers failed to be allocated. Fixes: 2ea1cbac267e2a ("net: lan966x: Update FDMA to change MTU.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220511204059.2689199-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.