aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/exported-sql-viewer.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-11-10clk: imx: scu: Make pd_np with static keywordZou Wei1-1/+1
Fix the following sparse warning: ./clk-scu.c:23:20: warning: symbol 'pd_np' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-10clk: imx8mq: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF && !CONFIG_MODULES): drivers/clk/imx/clk-imx8mq.c:626:34: warning: ‘imx8mq_clk_of_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-10clk: imx8mp: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF && !CONFIG_MODULES): drivers/clk/imx/clk-imx8mp.c:751:34: warning: ‘imx8mp_clk_of_match’ defined but not used [-Wunused-const-variable=] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-10clk: imx8mn: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF && !CONFIG_MODULES): drivers/clk/imx/clk-imx8mn.c:592:34: warning: ‘imx8mn_clk_of_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-10clk: imx8mm: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF && !CONFIG_MODULES): drivers/clk/imx/clk-imx8mm.c:641:34: warning: ‘imx8mm_clk_of_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-10clk: imx: gate2: Remove unused variable retZou Wei1-2/+1
This patch fixes below warning reported by coccicheck: ./clk-gate2.c:57:5-8: Unneeded variable: "ret". Return "0" on line 68 Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-03clk: imx: gate2: Add locking in is_enabled opAbel Vesa1-1/+9
Protect against enabling/disabling the gate while we're checking if it is enabled. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-03clk: imx: gate2: Add cgr_mask for more flexible number of control bitsAbel Vesa2-18/+22
On some i.MX8 platforms, there are HW gates that share the same bit. So in order to make this clock type more usable, use a mask to specify how many bits belong to those HW gates. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-03clk: imx: gate2: Check if clock is enabled against cgr_valAbel Vesa1-3/+3
Seems the logic here was wrong all along. For example, if the cgr_val is 2 (0b10), the clk_gate2_reg_is_enabled would report the clock as disabled. So check against cgr_val instead. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-03clk: imx: gate2: Keep the register writing in on placeAbel Vesa1-17/+16
Move all the register writing to the newly added clk_gate2_do_shared_clks and call that everywhere need needed. Cleans up the code a little bit. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-03clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special caseAbel Vesa2-25/+8
This was a hack which would allow multiple HW gates to be controlled by a single bit. The only user of this is the imx_dev_clk_hw_gate_shared which is not used anywhere as of now. Basically, complicates the logic of the driver for no reason. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-03clk: imx: scu: fix build break when compiled as modulesDong Aisheng1-2/+2
After commit e0d0d4d86c76 ("clk: imx8qxp: Support building i.MX8QXP clock driver as module"), clk-scu.c and clk-imx8qxp.c are complied in one module, thus there can be only one module_init() in those two files. Commit 77d8f3068c63 ("clk: imx: scu: add two cells binding support") introduced another module_init() in clk_scu.c which caused the errors below. To fix the issue, we can remove the unnecessary builtin_platform_driver from clk_scu.c and directly register the driver in imx_clk_scu_init(). CC [M] drivers/clk/imx/clk-scu.o In file included from ../include/linux/of_device.h:6, from ../include/linux/of_platform.h:12, from ../drivers/clk/imx/clk-scu.c:11: ../drivers/clk/imx/clk-scu.c: In function ‘imx_clk_scu_init’: ../drivers/clk/imx/clk-scu.c:176:35: error: ‘imx_clk_scu_driver’ undeclared (first use in this function); did you mean ‘imx_clk_scu_init’? 176 | return platform_driver_register(&imx_clk_scu_driver); | ^~~~~~~~~~~~~~~~~~ ../include/linux/platform_device.h:218:29: note: in definition of macro ‘platform_driver_register’ 218 | __platform_driver_register(drv, THIS_MODULE) | ^~~ ../drivers/clk/imx/clk-scu.c:176:35: note: each undeclared identifier is reported only once for each function it appears in 176 | return platform_driver_register(&imx_clk_scu_driver); | ^~~~~~~~~~~~~~~~~~ ../include/linux/platform_device.h:218:29: note: in definition of macro ‘platform_driver_register’ 218 | __platform_driver_register(drv, THIS_MODULE) | ^~~ ../drivers/clk/imx/clk-scu.c:177:1: error: control reaches end of non-void function [-Werror=return-type] 177 | } | ^ At top level: ../drivers/clk/imx/clk-scu.c:470:31: warning: ‘imx_clk_scu_driver’ defined but not used [-Wunused-variable] 470 | static struct platform_driver imx_clk_scu_driver = { Reported-by: kernel test robot <lkp@intel.com> Fixes: 77d8f3068c63 ("clk: imx: scu: add two cells binding support") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-01clk: imx: remove redundant assignment to pointer npColin Ian King1-1/+1
Pointer np is being initialized with a value that is never read and it is being updated with a value later on. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-01clk: imx: remove unneeded semicolonTom Rix1-1/+1
A semicolon is not needed after a switch statement. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26clk: imx: lpcg: add suspend/resume supportDong Aisheng3-0/+39
LPCG clock state may be lost when it's power domain is completely off during system suspend/resume and we need save and restore the state properly. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26clk: imx: clk-imx8qxp-lpcg: add runtime pm supportDong Aisheng1-5/+19
add runtime pm support Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26clk: imx: lpcg: allow lpcg clk to take device pointerDong Aisheng2-8/+24
Used to support runtime pm. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26clk: imx: imx8qxp-lpcg: add parsing clocks from device treeDong Aisheng3-0/+133
One LPCG controller supports up to 8 clock outputs while each of them is fixed to 4 bits. It supports only gating function with fixed bits. So we can use the clk-indices to fetch the corresponding clock idx from device tree. With this way, we can write a generic LPCG clock drivers. This patch add that support to parse clocks from device tree. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26clk: imx: scu: add suspend/resume supportDong Aisheng1-0/+49
Clock state will be lost when its power domain is completely off during system suspend/resume. So we save and restore the state accordingly in suspend/resume callback. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26clk: imx: scu: add runtime pm supportDong Aisheng1-2/+20
Add runtime pm support Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26clk: imx: scu: allow scu clk to take device pointerDong Aisheng2-8/+10
Used to support runtime pm. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26clk: imx: scu: bypass cpu power domainsDong Aisheng1-0/+4
Bypass cpu power domains which are owned by ATF. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26clk: imx: scu: add two cells binding supportDong Aisheng3-67/+252
This patch implements the new two cells binding for SCU clocks. The usage is as follows: clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER> Due to each SCU clock is associated with a power domain, without power on the domain, the SCU clock can't work. So we create platform devices for each domain clock respectively and manually attach the required domain before register the clock devices, then we can register clocks in the clock platform driver accordingly. Note because we do not have power domain info in device tree and the SCU resource ID is the same for power domain and clock, so we use resource ID to find power domains. Later, we will also use this clock platform driver to support suspend/resume and runtime pm. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-25Linux 5.10-rc1Linus Torvalds1-2/+2
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches117-196/+196
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25kernel/sys.c: fix prototype of prctl_get_tid_address()Rasmus Villemoes1-3/+3
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25mm: remove kzfree() compatibility definitionEric Biggers6-8/+6
Commit 453431a54934 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25checkpatch: enable GIT_DIR environment use to set git repository locationJoe Perches1-5/+7
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devsHans de Goede1-1/+10
Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices(). But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices(). Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created. This fixes the Microsoft Surface Go 2 hanging at boot. Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627 Reported-by: Rainer Finke <rainer@finke.cc> Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-24random32: add a selftest for the prandom32 codeWilly Tarreau1-0/+56
Given that this code is new, let's add a selftest for it as well. It doesn't rely on fixed sets, instead it picks 1024 numbers and verifies that they're not more correlated than desired. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-24random32: add noise from network and scheduling activityWilly Tarreau4-0/+30
With the removal of the interrupt perturbations in previous random32 change (random32: make prandom_u32() output unpredictable), the PRNG has become 100% deterministic again. While SipHash is expected to be way more robust against brute force than the previous Tausworthe LFSR, there's still the risk that whoever has even one temporary access to the PRNG's internal state is able to predict all subsequent draws till the next reseed (roughly every minute). This may happen through a side channel attack or any data leak. This patch restores the spirit of commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") in that it will perturb the internal PRNG's statee using externally collected noise, except that it will not pick that noise from the random pool's bits nor upon interrupt, but will rather combine a few elements along the Tx path that are collectively hard to predict, such as dev, skb and txq pointers, packet length and jiffies values. These ones are combined using a single round of SipHash into a single long variable that is mixed with the net_rand_state upon each invocation. The operation was inlined because it produces very small and efficient code, typically 3 xor, 2 add and 2 rol. The performance was measured to be the same (even very slightly better) than before the switch to SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC (i40e), the connection rate dropped from 556k/s to 555k/s while the SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-24random32: make prandom_u32() output unpredictableGeorge Spelvin4-190/+318
Non-cryptographic PRNGs may have great statistical properties, but are usually trivially predictable to someone who knows the algorithm, given a small sample of their output. An LFSR like prandom_u32() is particularly simple, even if the sample is widely scattered bits. It turns out the network stack uses prandom_u32() for some things like random port numbers which it would prefer are *not* trivially predictable. Predictability led to a practical DNS spoofing attack. Oops. This patch replaces the LFSR with a homebrew cryptographic PRNG based on the SipHash round function, which is in turn seeded with 128 bits of strong random key. (The authors of SipHash have *not* been consulted about this abuse of their algorithm.) Speed is prioritized over security; attacks are rare, while performance is always wanted. Replacing all callers of prandom_u32() is the quick fix. Whether to reinstate a weaker PRNG for uses which can tolerate it is an open question. Commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") was an earlier attempt at a solution. This patch replaces it. Reported-by: Amit Klein <aksecurity@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ [ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions to prandom.h for later use; merged George's prandom_seed() proposal; inlined siprand_u32(); replaced the net_rand_state[] array with 4 members to fix a build issue; cosmetic cleanups to make checkpatch happy; fixed RANDOM32_SELFTEST build ] Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-24KVM: ioapic: break infinite recursion on lazy EOIVitaly Kuznetsov1-4/+1
During shutdown the IOAPIC trigger mode is reset to edge triggered while the vfio-pci INTx is still registered with a resampler. This allows us to get into an infinite loop: ioapic_set_irq -> ioapic_lazy_update_eoi -> kvm_ioapic_update_eoi_one -> kvm_notify_acked_irq -> kvm_notify_acked_gsi -> (via irq_acked fn ptr) irqfd_resampler_ack -> kvm_set_irq -> (via set fn ptr) kvm_set_ioapic_irq -> kvm_ioapic_set_irq -> ioapic_set_irq Commit 8be8f932e3db ("kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts", 2020-05-04) acknowledges that this recursion loop exists and tries to avoid it at the call to ioapic_lazy_update_eoi, but at this point the scenario is already set, we have an edge interrupt with resampler on the same gsi. Fortunately, the only user of irq ack notifiers (in addition to resamplefd) is i8254 timer interrupt reinjection. These are edge-triggered, so in principle they would need the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi, but they already disable AVIC(*), so they don't need the lazy EOI behavior. Therefore, remove the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi. This fixes CVE-2020-27152. Note that this issue cannot happen with SR-IOV assigned devices because virtual functions do not have INTx, only MSI. Fixes: f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI") Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-24KVM: vmx: rename pi_init to avoid conflict with paridePaolo Bonzini3-4/+4
allyesconfig results in: ld: drivers/block/paride/paride.o: in function `pi_init': (.text+0x1340): multiple definition of `pi_init'; arch/x86/kvm/vmx/posted_intr.o:posted_intr.c:(.init.text+0x0): first defined here make: *** [Makefile:1164: vmlinux] Error 1 because commit: commit 8888cdd0996c2d51cd417f9a60a282c034f3fa28 Author: Xiaoyao Li <xiaoyao.li@intel.com> Date: Wed Sep 23 11:31:11 2020 -0700 KVM: VMX: Extract posted interrupt support to separate files added another pi_init(), though one already existed in the paride code. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-24KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 buildSean Christopherson1-1/+1
Replace a modulo operator with the more common pattern for computing the gfn "offset" of a huge page to fix an i386 build error. arch/x86/kvm/mmu/tdp_mmu.c:212: undefined reference to `__umoddi3' In fact, almost all of tdp_mmu.c can be elided on 32-bit builds, but that is a much larger patch. Fixes: 2f2fad0897cb ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs") Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20201024031150.9318-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23cifs: update internal module version numberSteve French1-1/+1
To 2.29 Signed-off-by: Steve French <stfrench@microsoft.com>
2020-10-23x86/uaccess: fix code generation in put_user()Rasmus Villemoes1-1/+9
Quoting https://gcc.gnu.org/onlinedocs/gcc/Local-Register-Variables.html: You can define a local register variable and associate it with a specified register... The only supported use for this feature is to specify registers for input and output operands when calling Extended asm (see Extended Asm). This may be necessary if the constraints for a particular machine don't provide sufficient control to select the desired register. On 32-bit x86, this is used to ensure that gcc will put an 8-byte value into the %edx:%eax pair, while all other cases will just use the single register %eax (%rax on x86-64). While the _ASM_AX actually just expands to "%eax", note this comment next to get_user() which does something very similar: * The use of _ASM_DX as the register specifier is a bit of a * simplification, as gcc only cares about it as the starting point * and not size: for a 64-bit value it will use %ecx:%edx on 32 bits * (%ecx being the next register in gcc's x86 register sequence), and * %rdx on 64 bits. However, getting this to work requires that there is no code between the assignment to the local register variable and its use as an input to the asm() which can possibly clobber any of the registers involved - including evaluation of the expressions making up other inputs. In the current code, the ptr expression used directly as an input may cause such code to be emitted. For example, Sean Christopherson observed that with KASAN enabled and ptr being current->set_child_tid (from chedule_tail()), the load of current->set_child_tid causes a call to __asan_load8() to be emitted immediately prior to the __put_user_4 call, and Naresh Kamboju reports that various mmstress tests fail on KASAN-enabled builds. It's also possible to synthesize a broken case without KASAN if one uses "foo()" as the ptr argument, with foo being some "extern u64 __user *foo(void);" (though I don't know if that appears in real code). Fix it by making sure ptr gets evaluated before the assignment to __val_pu, and add a comment that __val_pu must be the last thing computed before the asm() is entered. Cc: Sean Christopherson <sean.j.christopherson@intel.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: d55564cfc222 ("x86: Make __put_user() generate an out-of-line call") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-23smb3: add some missing definitions from MS-FSCCSteve French2-0/+28
Add some structures and defines that were recently added to the protocol documentation (see MS-FSCC sections 2.3.29-2.3.34). Signed-off-by: Steve French <stfrench@microsoft.com>
2020-10-23smb3: remove two unused variablesSteve French1-5/+0
Fix two unused variables in commit "add support for stat of WSL reparse points for special file types" Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-10-23smb3: add support for stat of WSL reparse points for special file typesSteve French6-14/+189
This is needed so when mounting to Windows we do not misinterpret various special files created by Linux (WSL) as symlinks. An earlier patch addressed readdir. This patch fixes stat (getattr). With this patch:   File: /mnt1/char   Size: 0          Blocks: 0          IO Block: 16384  character special file Device: 34h/52d Inode: 844424930132069  Links: 1     Device type: 0,0 Access: (0755/crwxr-xr-x)  Uid: (    0/    root)   Gid: (    0/    root) Access: 2020-10-21 17:46:51.839458900 -0500 Modify: 2020-10-21 17:46:51.839458900 -0500 Change: 2020-10-21 18:30:39.797358800 -0500  Birth: -   File: /mnt1/fifo   Size: 0          Blocks: 0          IO Block: 16384  fifo Device: 34h/52d Inode: 1125899906842722  Links: 1 Access: (0755/prwxr-xr-x)  Uid: (    0/    root)   Gid: (    0/    root) Access: 2020-10-21 16:21:37.259249700 -0500 Modify: 2020-10-21 16:21:37.259249700 -0500 Change: 2020-10-21 18:30:39.797358800 -0500  Birth: -   File: /mnt1/block   Size: 0          Blocks: 0          IO Block: 16384  block special file Device: 34h/52d Inode: 844424930132068  Links: 1     Device type: 0,0 Access: (0755/brwxr-xr-x)  Uid: (    0/    root)   Gid: (    0/    root) Access: 2020-10-21 17:10:47.913103200 -0500 Modify: 2020-10-21 17:10:47.913103200 -0500 Change: 2020-10-21 18:30:39.796725500 -0500  Birth: - without the patch all show up incorrectly as symlinks with annoying "operation not supported error also returned"   File: /mnt1/charstat: cannot read symbolic link '/mnt1/char': Operation not supported   Size: 0          Blocks: 0          IO Block: 16384  symbolic link Device: 34h/52d Inode: 844424930132069  Links: 1 Access: (0000/l---------)  Uid: (    0/    root)   Gid: (    0/    root) Access: 2020-10-21 17:46:51.839458900 -0500 Modify: 2020-10-21 17:46:51.839458900 -0500 Change: 2020-10-21 18:30:39.797358800 -0500  Birth: -   File: /mnt1/fifostat: cannot read symbolic link '/mnt1/fifo': Operation not supported   Size: 0          Blocks: 0          IO Block: 16384  symbolic link Device: 34h/52d Inode: 1125899906842722  Links: 1 Access: (0000/l---------)  Uid: (    0/    root)   Gid: (    0/    root) Access: 2020-10-21 16:21:37.259249700 -0500 Modify: 2020-10-21 16:21:37.259249700 -0500 Change: 2020-10-21 18:30:39.797358800 -0500  Birth: -   File: /mnt1/blockstat: cannot read symbolic link '/mnt1/block': Operation not supported   Size: 0          Blocks: 0          IO Block: 16384  symbolic link Device: 34h/52d Inode: 844424930132068  Links: 1 Access: (0000/l---------)  Uid: (    0/    root)   Gid: (    0/    root) Access: 2020-10-21 17:10:47.913103200 -0500 Modify: 2020-10-21 17:10:47.913103200 -0500 Change: 2020-10-21 18:30:39.796725500 -0500 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2020-10-23ata: pata_ns87415.c: Document support on parisc with superio chipHelge Deller1-2/+1
I tested this driver on my HP PA-RISC C3000 workstation and it does work with the built-in TEAC CD-532E-B CD-ROM drive. So drop the TODO item and adjust the file header. Signed-off-by: Helge Deller <deller@gmx.de>
2020-10-23ata: fix some kernel-doc markupsMauro Carvalho Chehab3-3/+3
Some functions have different names between their prototypes and the kernel-doc markup. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-23block: blk-mq: fix a kernel-doc markupMauro Carvalho Chehab1-1/+1
Fix a typo: blk_mq_run_hw_queue -> blk_mq_run_hw_queues Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-23parisc: Add wrapper syscalls to fix O_NONBLOCK flag usageHelge Deller2-7/+78
The commit 75ae04206a4d ("parisc: Define O_NONBLOCK to become 000200000") changed the O_NONBLOCK constant to have only one bit set (like all other architectures). This change broke some existing userspace code (e.g. udevadm, systemd-udevd, elogind) which called specific syscalls which do strict value checking on their flag parameter. This patch adds wrapper functions for the relevant syscalls. The wrappers masks out any old invalid O_NONBLOCK flags, reports in the syslog if the old O_NONBLOCK value was used and then calls the target syscall with the new O_NONBLOCK value. Fixes: 75ae04206a4d ("parisc: Define O_NONBLOCK to become 000200000") Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Meelis Roos <mroos@linux.ee> Tested-by: Jeroen Roovers <jer@xs4all.nl>
2020-10-23gfs2: Recover statfs info in journal headAbhi Das3-1/+106
Apply the outstanding statfs changes in the journal head to the master statfs file. Zero out the local statfs file for good measure. Previously, statfs updates would be read in from the local statfs inode and synced to the master statfs inode during recovery. We now use the statfs updates in the journal head to update the master statfs inode instead of reading in from the local statfs inode. To preserve backward compatibility with kernels that can't do this, we still need to keep the local statfs inode up to date by writing changes to it. At some point in the future, we can do away with the local statfs inodes altogether and keep the statfs changes solely in the journal. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-10-23gfs2: lookup local statfs inodes prior to journal recoveryAbhi Das4-36/+139
We need to lookup the master statfs inode and the local statfs inodes earlier in the mount process (in init_journal) so journal recovery can use them when it attempts to recover the statfs info. We lookup all the local statfs inodes and store them in a linked list to allow a node to recover statfs info for other nodes in the cluster. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-10-23nvme-fc: shorten reconnect delay if possible for FCJames Smart1-1/+18
We've had several complaints about a 10s reconnect delay (the default) when there was an error while there is connectivity to a subsystem. The max_reconnects and reconnect_delay are set in common code prior to calling the transport to create the controller. This change checks if the default reconnect delay is being used, and if so, it adjusts it to a shorter period (2s) for the nvme-fc transport. It does so by calculating the controller loss tmo window, changing the value of the reconnect delay, and then recalculating the maximum number of reconnect attempts allowed. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-23nvme-fc: wait for queues to freeze before calling update_hr_hw_queuesJames Smart1-2/+5
On reconnect, the code currently does not freeze the controller before possibly updating the number hw queues for the controller. Add the freeze before updating the number of hw queues. Note: the queues are already started and remain started through the reconnect. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-23nvme-fc: fix error loop in create_hw_io_queuesJames Smart1-2/+2
The loop that backs out of hw io queue creation continues through index 0, which corresponds to the admin queue as well. Fix the loop so it only proceeds through indexes 1..n which correspond to I/O queues. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-23nvme-fc: fix io timeout to abort I/OJames Smart1-39/+69
Currently, an I/O timeout unconditionally invokes nvme_fc_error_recovery() which checks for LIVE or CONNECTING state. If live, the routine resets the controller which initiates a reconnect - which is valid. If CONNECTING, err_work is scheduled. Err_work then calls the terminate_io routine, which also checks for CONNECTING and noops any further action on outstanding I/O. The result is nothing happened to the timed out io. As such, if the command was dropped on the wire, it will never timeout / complete, and the connect process will hang. Change the behavior of the io timeout routine to unconditionally abort the I/O. I/O completion handling will note that an io failed due to an abort and will terminate the connection / association as needed. If the abort was unable to happen, continue with a call to nvme_fc_error_recovery(). To ensure something different happens in nvme_fc_error_recovery() rework it so at it will abort all I/Os on the association to force a failure. As I/O aborts now may occur outside of delete_association, counting for completion must be wary and only count those aborted during delete_association when TERMIO is set on the controller. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.