aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/exported-sql-viewer.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-24iommu/vt-d: Mark firmware tainted if RMRR fails sanity checkBarret Rhoden1-4/+8
RMRR entries describe memory regions that are DMA targets for devices outside the kernel's control. RMRR entries that fail the sanity check are pointing to regions of memory that the firmware did not tell the kernel are reserved or otherwise should not be used. Instead of aborting DMAR processing, this commit marks the firmware as tainted. These RMRRs will still be identity mapped, otherwise, some devices, e.x. graphic devices, will not work during boot. Signed-off-by: Barret Rhoden <brho@google.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Fixes: f036c7fa0ab60 ("iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved") Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-17iommu/vt-d: Don't reject Host Bridge due to scope mismatchjimyan1-1/+1
On a system with two host bridges(0000:00:00.0,0000:80:00.0), iommu initialization fails with DMAR: Device scope type does not match for 0000:80:00.0 This is because the DMAR table reports this device as having scope 2 (ACPI_DMAR_SCOPE_TYPE_BRIDGE): but the device has a type 0 PCI header: 80:00.0 Class 0600: Device 8086:2020 (rev 06) 00: 86 80 20 20 47 05 10 00 06 00 00 06 10 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 00 30: 00 00 00 00 90 00 00 00 00 00 00 00 00 01 00 00 VT-d works perfectly on this system, so there's no reason to bail out on initialization due to this apparent scope mismatch. Add the class 0x06 ("PCI_BASE_CLASS_BRIDGE") as a heuristic for allowing DMAR initialization for non-bridge PCI devices listed with scope bridge. Signed-off-by: jimyan <jimyan@baidu.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: debugfs: Add support to show page table internalsLu Baolu3-2/+79
Export page table internals of the domain attached to each device. Example of such dump on a Skylake machine: $ sudo cat /sys/kernel/debug/iommu/intel/domain_translation_struct [ ... ] Device 0000:00:14.0 with pasid 0 @0x15f3d9000 IOVA_PFN PML5E PML4E 0x000000008ced0 | 0x0000000000000000 0x000000015f3da003 0x000000008ced1 | 0x0000000000000000 0x000000015f3da003 0x000000008ced2 | 0x0000000000000000 0x000000015f3da003 0x000000008ced3 | 0x0000000000000000 0x000000015f3da003 0x000000008ced4 | 0x0000000000000000 0x000000015f3da003 0x000000008ced5 | 0x0000000000000000 0x000000015f3da003 0x000000008ced6 | 0x0000000000000000 0x000000015f3da003 0x000000008ced7 | 0x0000000000000000 0x000000015f3da003 0x000000008ced8 | 0x0000000000000000 0x000000015f3da003 0x000000008ced9 | 0x0000000000000000 0x000000015f3da003 PDPE PDE PTE 0x000000015f3db003 0x000000015f3dc003 0x000000008ced0003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced1003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced2003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced3003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced4003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced5003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced6003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced7003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced8003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced9003 [ ... ] Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Use iova over first levelLu Baolu1-4/+2
After we make all map/unmap paths support first level page table. Let's turn it on if hardware supports scalable mode. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Update first level super page capabilityLu Baolu1-5/+12
First-level translation may map input addresses to 4-KByte pages, 2-MByte pages, or 1-GByte pages. Support for 4-KByte pages and 2-Mbyte pages are mandatory for first-level translation. Hardware support for 1-GByte page is reported through the FL1GP field in the Capability Register. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Make first level IOVA canonicalLu Baolu1-2/+15
First-level translation restricts the input-address to a canonical address (i.e., address bits 63:N have the same value as address bit [N-1], where N is 48-bits with 4-level paging and 57-bits with 5-level paging). (section 3.6 in the spec) This makes first level IOVA canonical by using IOVA with bit [N-1] always cleared. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Flush PASID-based iotlb for iova over first levelLu Baolu3-15/+84
When software has changed first-level tables, it should invalidate the affected IOTLB and the paging-structure-caches using the PASID- based-IOTLB Invalidate Descriptor defined in spec 6.5.2.4. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Setup pasid entries for iova over first levelLu Baolu2-11/+62
Intel VT-d in scalable mode supports two types of page tables for IOVA translation: first level and second level. The IOMMU driver can choose one from both for IOVA translation according to the use case. This sets up the pasid entry if a domain is selected to use the first-level page table for iova translation. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Add PASID_FLAG_FL5LP for first-level pasid setupLu Baolu3-7/+14
Current intel_pasid_setup_first_level() use 5-level paging for first level translation if CPUs use 5-level paging mode too. This makes sense for SVA usages since the page table is shared between CPUs and IOMMUs. But it makes no sense if we only want to use first level for IOVA translation. Add PASID_FLAG_FL5LP bit in the flags which indicates whether the 5-level paging mode should be used. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attrLu Baolu1-0/+56
This adds the Intel VT-d specific callback of setting DOMAIN_ATTR_NESTING domain attribution. It is necessary to let the VT-d driver know that the domain represents a virtual machine which requires the IOMMU hardware to support nested translation mode. Return success if the IOMMU hardware suports nested mode, otherwise failure. Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Identify domains using first level page tableLu Baolu1-0/+39
This checks whether a domain should use the first level page table for map/unmap and marks it in the domain structure. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Loose requirement for flush queue initializatonLu Baolu1-8/+6
Currently if flush queue initialization fails, we return error or enforce the system-wide strict mode. These are unnecessary because we always check the existence of a flush queue before queuing any iova's for lazy flushing. Printing a informational message is enough. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Avoid iova flush queue in strict modeLu Baolu1-9/+15
If Intel IOMMU strict mode is enabled by users, it's unnecessary to create the iova flush queue. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: trace: Extend map_sg trace eventLu Baolu2-8/+47
Current map_sg stores trace message in a coarse manner. This extends it so that more detailed messages could be traced. The map_sg trace message looks like: map_sg: dev=0000:00:17.0 [1/9] dev_addr=0xf8f90000 phys_addr=0x158051000 size=4096 map_sg: dev=0000:00:17.0 [2/9] dev_addr=0xf8f91000 phys_addr=0x15a858000 size=4096 map_sg: dev=0000:00:17.0 [3/9] dev_addr=0xf8f92000 phys_addr=0x15aa13000 size=4096 map_sg: dev=0000:00:17.0 [4/9] dev_addr=0xf8f93000 phys_addr=0x1570f1000 size=8192 map_sg: dev=0000:00:17.0 [5/9] dev_addr=0xf8f95000 phys_addr=0x15c6d0000 size=4096 map_sg: dev=0000:00:17.0 [6/9] dev_addr=0xf8f96000 phys_addr=0x157194000 size=4096 map_sg: dev=0000:00:17.0 [7/9] dev_addr=0xf8f97000 phys_addr=0x169552000 size=4096 map_sg: dev=0000:00:17.0 [8/9] dev_addr=0xf8f98000 phys_addr=0x169dde000 size=4096 map_sg: dev=0000:00:17.0 [9/9] dev_addr=0xf8f99000 phys_addr=0x148351000 size=4096 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Misc macro clean up for SVMJacob Pan1-40/+39
Use combined macros for_each_svm_dev() to simplify SVM device iteration and error checking. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Avoid sending invalid page responseJacob Pan1-4/+3
Page responses should only be sent when last page in group (LPIG) or private data is present in the page request. This patch avoids sending invalid descriptors. Fixes: 5d308fc1ecf53 ("iommu/vt-d: Add 256-bit invalidation descriptor support") Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Replace Intel specific PASID allocator with IOASIDJacob Pan4-56/+30
Make use of generic IOASID code to manage PASID allocation, free, and lookup. Replace Intel specific code. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Fix off-by-one in PASID allocationJacob Pan1-1/+1
PASID allocator uses IDR which is exclusive for the end of the allocation range. There is no need to decrement pasid_max. Fixes: af39507305fb ("iommu/vt-d: Apply global PASID in SVA") Reported-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Avoid duplicated code for PASID setupJacob Pan1-30/+18
After each setup for PASID entry, related translation caches must be flushed. We can combine duplicated code into one function which is less error prone. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Reject SVM bind for failed capability checkJacob Pan1-0/+3
Add a check during SVM bind to ensure CPU and IOMMU hardware capabilities are met. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Match CPU and IOMMU paging modeJacob Pan1-2/+10
When setting up first level page tables for sharing with CPU, we need to ensure IOMMU can support no less than the levels supported by the CPU. It is not adequate, as in the current code, to set up 5-level paging in PASID entry First Level Paging Mode(FLPM) solely based on CPU. Currently, intel_pasid_setup_first_level() is only used by native SVM code which already checks paging mode matches. However, future use of this helper function may not be limited to native SVM. https://lkml.org/lkml/2019/11/18/1037 Fixes: 437f35e1cd4c8 ("iommu/vt-d: Add first level page table interface") Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Fix CPU and IOMMU SVM feature matching checksJacob Pan3-22/+33
Shared Virtual Memory(SVM) is based on a collective set of hardware features detected at runtime. There are requirements for matching CPU and IOMMU capabilities. The current code checks CPU and IOMMU feature set for SVM support but the result is never stored nor used. Therefore, SVM can still be used even when these checks failed. The consequences can be: 1. CPU uses 5-level paging mode for virtual address of 57 bits, but IOMMU can only support 4-level paging mode with 48 bits address for DMA. 2. 1GB page size is used by CPU but IOMMU does not support it. VT-d unrecoverable faults may be generated. The best solution to fix these problems is to prevent them in the first place. This patch consolidates code for checking PASID, CPU vs. IOMMU paging mode compatibility, as well as provides specific error messages for each failed checks. On sane hardware configurations, these error message shall never appear in kernel log. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Add Kconfig option to enable/disable scalable modeLu Baolu2-1/+18
This adds Kconfig option INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON to make it easier for distributions to enable or disable the Intel IOMMU scalable mode by default during kernel build. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-22Linux 5.5-rc3Linus Torvalds1-1/+1
2019-12-22pipe: fix empty pipe check in pipe_write()Jan Stancek1-1/+1
LTP pipeio_1 test is hanging with v5.5-rc2-385-gb8e382a185eb, with read side observing empty pipe and sleeping and write side running out of space and then sleeping as well. In this scenario there are 5 writers and 1 reader. Problem is that after pipe_write() reacquires pipe lock, it re-checks for empty pipe with potentially stale 'head' and doesn't wake up read side anymore. pipe->tail can advance beyond 'head', because there are multiple writers. Use pipe->head for empty pipe check after reacquiring lock to observe current state. Testing: With patch, LTP pipeio_1 ran successfully in loop for 1 hour. Without patch it hanged within a minute. Fixes: 1b6b26ae7053 ("pipe: fix and clarify pipe write wakeup logic") Reported-by: Rachel Sibley <rasibley@redhat.com> Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-22MAINTAINERS: remove Radim from KVM maintainersPaolo Bonzini1-2/+0
Radim's kernel.org email is bouncing, which I take as a signal that he is not really able to deal with KVM at this time. Make MAINTAINERS match the effective value of KVM's bus factor. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-22MAINTAINERS: Orphan KVM for MIPSJames Hogan1-2/+2
I haven't been active for 18 months, and don't have the hardware set up to test KVM for MIPS, so mark it as orphaned and remove myself as maintainer. Hopefully somebody from MIPS can pick this up. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-21ext4: clarify impact of 'commit' mount optionJan Kara1-8/+11
The description of 'commit' mount option dates back to ext3 times. Update the description to match current meaning for ext4. Reported-by: Paul Richards <paul.richards@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191218111210.14161-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-12-21ext4: fix unused-but-set-variable warning in ext4_add_entry()Yunfeng Ye1-1/+3
Warning is found when compile with "-Wunused-but-set-variable": fs/ext4/namei.c: In function ‘ext4_add_entry’: fs/ext4/namei.c:2167:23: warning: variable ‘sbi’ set but not used [-Wunused-but-set-variable] struct ext4_sb_info *sbi; ^~~ Fix this by moving the variable @sbi under CONFIG_UNICODE. Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/cb5eb904-224a-9701-c38f-cb23514b1fff@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-12-21tracing: Fix endianness bug in histogram triggerSven Schnelle1-1/+20
At least on PA-RISC and s390 synthetic histogram triggers are failing selftests because trace_event_raw_event_synth() always writes a 64 bit values, but the reader expects a field->size sized value. On little endian machines this doesn't hurt, but on big endian this makes the reader always read zero values. Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com Cc: stable@vger.kernel.org Fixes: 4b147936fa509 ("tracing: Add support for 'synthetic' events") Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-21samples/trace_printk: Wait for IRQ work to finishSven Schnelle1-0/+1
trace_printk schedules work via irq_work_queue(), but doesn't wait until it was processed. The kprobe_module.tc testcase does: :;: "Load module again, which means the event1 should be recorded";: modprobe trace-printk grep "event1:" trace so the grep which checks the trace file might run before the irq work was processed. Fix this by adding a irq_work_sync(). Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-3-svens@linux.ibm.com Cc: stable@vger.kernel.org Fixes: af2a0750f3749 ("selftests/ftrace: Improve kprobe on module testcase to load/unload module") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-21tracing: Fix lock inversion in trace_event_enable_tgid_record()Prateek Sood2-4/+12
Task T2 Task T3 trace_options_core_write() subsystem_open() mutex_lock(trace_types_lock) mutex_lock(event_mutex) set_tracer_flag() trace_event_enable_tgid_record() mutex_lock(trace_types_lock) mutex_lock(event_mutex) This gives a circular dependency deadlock between trace_types_lock and event_mutex. To fix this invert the usage of trace_types_lock and event_mutex in trace_options_core_write(). This keeps the sequence of lock usage consistent. Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com Cc: stable@vger.kernel.org Fixes: d914ba37d7145 ("tracing: Add support for recording tgid of tasks") Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-22kbuild: clarify the difference between obj-y and obj-m w.r.t. descendingMasahiro Yamada1-3/+13
Kbuild descends into a directory by either 'y' or 'm', but there is an important difference. Kbuild combines the built-in objects into built-in.a in each directory. The built-in.a in the directory visited by obj-y is merged into the built-in.a in the parent directory. This merge happens recursively when Kbuild is ascending back towards the top directory, then built-in objects are linked into vmlinux eventually. This works properly only when the Makefile specifying obj-y is reachable by the chain of obj-y. On the other hand, Kbuild does not take built-in.a from the directory visited by obj-m. This it, all the objects in that directory are supposed to be modular. If Kbuild descends into a directory by obj-m, but the Makefile in the sub-directory specifies obj-y, those objects are just left orphan. The current statement "Kbuild only uses this information to decide that it needs to visit the directory" is misleading. Clarify the difference. Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Johan Hovold <johan@kernel.org>
2019-12-20sfc: Include XDP packet headroom in buffer step size.Charles McLachlan1-7/+7
Correct a mismatch between rx_page_buf_step and the actual step size used when filling buffer pages. This patch fixes the page overrun that occured when the MTU was set to anything bigger than 1692. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20sfc: fix channel allocation with brute forceEdward Cree2-22/+19
It was possible for channel allocation logic to get confused between what it had and what it wanted, and end up trying to use the same channel for both PTP and regular TX. This led to a kernel panic: BUG: unable to handle page fault for address: 0000000000047635 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0-rc3-ehc14+ #900 Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013 RIP: 0010:native_queued_spin_lock_slowpath+0x188/0x1e0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb e8 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 c0 98 02 00 48 03 04 f5 a0 c6 ed 81 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffc90000003d28 EFLAGS: 00010006 RAX: 0000000000047635 RBX: 0000000000000246 RCX: 0000000000040000 RDX: ffff888627a298c0 RSI: 0000000000003ffe RDI: ffff88861f6b8dd4 RBP: ffff8886225c6e00 R08: 0000000000040000 R09: 0000000000000000 R10: 0000000616f080c6 R11: 00000000000000c0 R12: ffff88861f6b8dd4 R13: ffffc90000003dc8 R14: ffff88861942bf00 R15: ffff8886150f2000 FS: 0000000000000000(0000) GS:ffff888627a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000047635 CR3: 000000000200a000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x22/0x30 skb_queue_tail+0x1b/0x50 sock_queue_err_skb+0x9d/0xf0 __skb_complete_tx_timestamp+0x9d/0xc0 efx_dequeue_buffer+0x126/0x180 [sfc] efx_xmit_done+0x73/0x1c0 [sfc] efx_ef10_ev_process+0x56a/0xfe0 [sfc] ? tick_sched_do_timer+0x60/0x60 ? timerqueue_add+0x5d/0x70 ? enqueue_hrtimer+0x39/0x90 efx_poll+0x111/0x380 [sfc] ? rcu_accelerate_cbs+0x50/0x160 net_rx_action+0x14a/0x400 __do_softirq+0xdd/0x2d0 irq_exit+0xa0/0xb0 do_IRQ+0x53/0xe0 common_interrupt+0xf/0xf </IRQ> In the long run we intend to rewrite the channel allocation code, but for 'net' fix this by allocating extra_channels, and giving them TX queues, even if we do not in fact need them (e.g. on NICs without MAC TX timestamping), and thereby using simpler logic to assign the channels once they're allocated. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: dst: Force 4-byte alignment of dst_metricsGeert Uytterhoeven1-1/+1
When storing a pointer to a dst_metrics structure in dst_entry._metrics, two flags are added in the least significant bits of the pointer value. Hence this assumes all pointers to dst_metrics structures have at least 4-byte alignment. However, on m68k, the minimum alignment of 32-bit values is 2 bytes, not 4 bytes. Hence in some kernel builds, dst_default_metrics may be only 2-byte aligned, leading to obscure boot warnings like: WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x44/0x9a refcount_t: underflow; use-after-free. Modules linked in: CPU: 0 PID: 7 Comm: ksoftirqd/0 Tainted: G W 5.5.0-rc2-atari-01448-g114a1a1038af891d-dirty #261 Stack from 10835e6c: 10835e6c 0038134f 00023fa6 00394b0f 0000001c 00000009 00321560 00023fea 00394b0f 0000001c 001a70f8 00000009 00000000 10835eb4 00000001 00000000 04208040 0000000a 00394b4a 10835ed4 00043aa8 001a70f8 00394b0f 0000001c 00000009 00394b4a 0026aba8 003215a4 00000003 00000000 0026d5a8 00000001 003215a4 003a4361 003238d6 000001f0 00000000 003215a4 10aa3b00 00025e84 003ddb00 10834000 002416a8 10aa3b00 00000000 00000080 000aa038 0004854a Call Trace: [<00023fa6>] __warn+0xb2/0xb4 [<00023fea>] warn_slowpath_fmt+0x42/0x64 [<001a70f8>] refcount_warn_saturate+0x44/0x9a [<00043aa8>] printk+0x0/0x18 [<001a70f8>] refcount_warn_saturate+0x44/0x9a [<0026aba8>] refcount_sub_and_test.constprop.73+0x38/0x3e [<0026d5a8>] ipv4_dst_destroy+0x5e/0x7e [<00025e84>] __local_bh_enable_ip+0x0/0x8e [<002416a8>] dst_destroy+0x40/0xae Fix this by forcing 4-byte alignment of all dst_metrics structures. Fixes: e5fd387ad5b30ca3 ("ipv6: do not overwrite inetpeer metrics prematurely") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20selftests: pmtu: fix init mtu value in descriptionHangbin Liu1-3/+3
There is no a_r3, a_r4 in the testing topology. It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500. Fixes: e44e428f59e4 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20hv_netvsc: Fix unwanted rx_table resetHaiyang Zhang3-6/+11
In existing code, the receive indirection table, rx_table, is in struct rndis_device, which will be reset when changing MTU, ringparam, etc. User configured receive indirection table values will be lost. To fix this, move rx_table to struct net_device_context, and check netif_is_rxfh_configured(), so rx_table will be set to default only if no user configured value. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: phy: ensure that phy IDs are correctly typedRussell King2-5/+5
PHY IDs are 32-bit unsigned quantities. Ensure that they are always treated as such, and not passed around as "int"s. Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20mod_devicetable: fix PHY module formatRussell King1-2/+2
When a PHY is probed, if the top bit is set, we end up requesting a module with the string "mdio:-10101110000000100101000101010001" - the top bit is printed to a signed -1 value. This leads to the module not being loaded. Fix the module format string and the macro generating the values for it to ensure that we only print unsigned types and the top bit is always 0/1. We correctly end up with "mdio:10101110000000100101000101010001". Fixes: 8626d3b43280 ("phylib: Support phy module autoloading") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20qede: Disable hardware gro when xdp prog is installedManish Chopra1-2/+2
commit 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced a regression in driver that when xdp program is installed on qede device, device's aggregation feature (hardware GRO) is not getting disabled, which is unexpected with xdp. Fixes: 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: ena: fix issues in setting interrupt moderation params in ethtoolArthur Kiyanovski1-14/+10
Issue 1: -------- Reproduction steps: 1. sudo ethtool -C eth0 rx-usecs 128 2. sudo ethtool -C eth0 adaptive-rx on 3. sudo ethtool -C eth0 adaptive-rx off 4. ethtool -c eth0 expected output: rx-usecs 128 actual output: rx-usecs 0 Reason for issue: In stage 3, ethtool userspace calls first the ena_get_coalesce() handler to get the current value of all properties, and then the ena_set_coalesce() handler. When ena_get_coalesce() is called the adaptive interrupt moderation is still on. There is an if in the code that returns the rx_coalesce_usecs only if the adaptive interrupt moderation is off. And since it is still on, rx_coalesce_usecs is not set, meaning it stays 0. Solution to issue: Remove this if static interrupt moderation intervals have nothing to do with dynamic ones. Issue 2: -------- Reproduction steps: 1. sudo ethtool -C eth0 adaptive-rx on 2. sudo ethtool -C eth0 rx-usecs 128 3. ethtool -c eth0 expected output: rx-usecs 128 actual output: rx-usecs 0 Reason for issue: In stage 2, when ena_set_coalesce() is called, the handler tests if rx adaptive interrupt moderation is on, and if it is, it returns before getting to the part in the function that sets the rx non-adaptive interrupt moderation interval. Solution to issue: Remove the return from the function when rx adaptive interrupt moderation is on. Also cleaned up the fixed code in ena_set_coalesce by grouping together adaptive interrupt moderation toggling, and using && instead of nested ifs. Fixes: b3db86dc4b82 ("net: ena: reimplement set/get_coalesce()") Fixes: 0eda847953d8 ("net: ena: fix retrieval of nonadaptive interrupt moderation intervals") Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: ena: fix default tx interrupt moderation intervalArthur Kiyanovski1-1/+1
Current default non-adaptive tx interrupt moderation interval is 196 us. This value is too high and might cause the tx queue to fill up. In this commit we set the default non-adaptive tx interrupt moderation interval to 64 us in order to: 1. Reduce the probability of the queue filling-up (when compared to the current default value of 196 us). 2. Reduce unnecessary tx interrupt overhead (which happens if we set the default tx interval to 0). We determined experimentally that 64 us is an optimal value that reduces interrupt rate by more than 20% without affecting performance. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net/smc: unregister ib devices in reboot_eventKarsten Graul1-1/+1
In the reboot_event handler, unregister the ib devices and enable the IB layer to release the devices before the reboot. Fixes: a33a803cfe64 ("net/smc: guarantee removal of link groups in reboot") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: stmmac: platform: Fix MDIO init for platforms without PHYPadmanabhan Rajanbabu1-1/+1
The current implementation of "stmmac_dt_phy" function initializes the MDIO platform bus data, even in the absence of PHY. This fix will skip MDIO initialization if there is no PHY present. Fixes: 7437127 ("net: stmmac: Convert to phylink and remove phylib logic") Acked-by: Jayati Sahu <jayati.sahu@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)Chan Shu Tak, Alex1-2/+2
When a frame with NULL DSAP is received, llc_station_rcv is called. In turn, llc_stat_ev_rx_null_dsap_xid_c is called to check if it is a NULL XID frame. The return statement of llc_stat_ev_rx_null_dsap_xid_c returns 1 when the incoming frame is not a NULL XID frame and 0 otherwise. Hence, a NULL XID response is returned unexpectedly, e.g. when the incoming frame is a NULL TEST command. To fix the error, simply remove the conditional operator. A similar error in llc_stat_ev_rx_null_dsap_test_c is also fixed. Signed-off-by: Chan Shu Tak, Alex <alexchan@task.com.hk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: hisilicon: Fix a BUG trigered by wrong bytes_complJiangfeng Xiao1-1/+1
When doing stress test, we get the following trace: kernel BUG at lib/dynamic_queue_limits.c:26! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: hip04_eth CPU: 0 PID: 2003 Comm: tDblStackPcap0 Tainted: G O L 4.4.197 #1 Hardware name: Hisilicon A15 task: c3637668 task.stack: de3bc000 PC is at dql_completed+0x18/0x154 LR is at hip04_tx_reclaim+0x110/0x174 [hip04_eth] pc : [<c041abfc>] lr : [<bf0003a8>] psr: 800f0313 sp : de3bdc2c ip : 00000000 fp : c020fb10 r10: 00000000 r9 : c39b4224 r8 : 00000001 r7 : 00000046 r6 : c39b4000 r5 : 0078f392 r4 : 0078f392 r3 : 00000047 r2 : 00000000 r1 : 00000046 r0 : df5d5c80 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 1e189b80 DAC: 55555555 Process tDblStackPcap0 (pid: 2003, stack limit = 0xde3bc190) Stack: (0xde3bdc2c to 0xde3be000) [<c041abfc>] (dql_completed) from [<bf0003a8>] (hip04_tx_reclaim+0x110/0x174 [hip04_eth]) [<bf0003a8>] (hip04_tx_reclaim [hip04_eth]) from [<bf0012c0>] (hip04_rx_poll+0x20/0x388 [hip04_eth]) [<bf0012c0>] (hip04_rx_poll [hip04_eth]) from [<c04c8d9c>] (net_rx_action+0x120/0x374) [<c04c8d9c>] (net_rx_action) from [<c021eaf4>] (__do_softirq+0x218/0x318) [<c021eaf4>] (__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac) [<c021eea0>] (irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4) [<c0240130>] (msa_irq_exit) from [<c0267ba8>] (__handle_domain_irq+0x110/0x148) [<c0267ba8>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0558360>] (__irq_svc+0x40/0x58) Exception stack(0xde3bdde0 to 0xde3bde28) dde0: 00000000 00008001 c3637668 00000000 00000000 a00f0213 dd3627a0 c0af6380 de00: c086d380 a00f0213 c0a22a50 de3bde6c 00000002 de3bde30 c0558138 c055813c de20: 600f0213 ffffffff [<c0558360>] (__irq_svc) from [<c055813c>] (_raw_spin_unlock_irqrestore+0x44/0x54) Kernel panic - not syncing: Fatal exception in interrupt Pre-modification code: int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) { [...] [1] priv->tx_head = TX_NEXT(tx_head); [2] count++; [3] netdev_sent_queue(ndev, skb->len); [...] } An rx interrupt occurs if hip04_mac_start_xmit just executes to the line 2, tx_head has been updated, but corresponding 'skb->len' has not been added to dql_queue. And then hip04_mac_interrupt->__napi_schedule->hip04_rx_poll->hip04_tx_reclaim In hip04_tx_reclaim, because tx_head has been updated, bytes_compl will plus an additional "skb-> len" which has not been added to dql_queue. And then trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed). To solve the problem described above, we put "netdev_sent_queue(ndev, skb->len);" before "priv->tx_head = TX_NEXT(tx_head);" Fixes: a41ea46a9a12 ("net: hisilicon: new hip04 ethernet driver") Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: dsa: ksz: use common define for tag lenMichael Grzeschik1-5/+3
Remove special taglen define KSZ8795_INGRESS_TAG_LEN and use generic KSZ_INGRESS_TAG_LEN instead. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20s390/qeth: don't return -ENOTSUPP to userspaceJulian Wiedmann1-1/+1
ENOTSUPP is not uapi, use EOPNOTSUPP instead. Fixes: d66cb37e9664 ("qeth: Add new priority queueing options") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20s390/qeth: fix promiscuous mode after resetJulian Wiedmann3-1/+4
When managing the promiscuous mode during an RX modeset, qeth caches the current HW state to avoid repeated programming of the same state on each modeset. But while tearing down a device, we forget to clear the cached state. So when the device is later set online again, the initial RX modeset doesn't program the promiscuous mode since we believe it is already enabled. Fix this by clearing the cached state in the tear-down path. Note that for the SBP variant of promiscuous mode, this accidentally works right now because we unconditionally restore the SBP role while re-initializing. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.