aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/mem-phys-addr.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-20arm64: tegra: Add PCIe slot supply information in p2972-0000 platformVidya Sagar2-1/+27
Add 3.3V and 12V supplies regulators information of x16 PCIe slot in p2972-0000 platform which is owned by C5 controller and also enable C5 controller. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-20arm64: tegra: Add configuration for PCIe C5 sideband signalsVidya Sagar1-1/+37
Add support to configure PCIe C5's sideband signals PERST# and CLKREQ# as output and bi-directional signals respectively which unlike other PCIe controllers sideband signals are not configured by default. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-20PCI: tegra: Add support to enable slot regulatorsVidya Sagar1-0/+83
Add support to get regulator information of 3.3V and 12V supplies of a PCIe slot from the respective controller's device-tree node and enable those supplies. This is required in platforms like p2972-0000 where the supplies to x16 slot owned by C5 controller need to be enabled before attempting to enumerate the devices. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-20PCI: tegra: Add support to configure sideband pinsVidya Sagar1-2/+10
Add support to configure sideband signal pins when the information is present in the respective controller device-tree node. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: fold in YueHaibing's fix for build error without CONFIG_PINCTRL; https://lore.kernel.org/r/20190920014807.38288-1-yuehaibing@huawei.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-17PCI: vmd: Fix shadow offsets to reflect spec changesJon Derrick1-3/+6
The shadow offset scratchpad was moved to 0x2000-0x2010. Update the location to get the correct shadow offset. Fixes: 6788958e4f3c ("PCI: vmd: Assign membar addresses from shadow registers") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+
2019-09-17PCI: vmd: Fix config addressing when using bus offsetsJon Derrick1-7/+9
VMD maps child device config spaces to the VMD Config BAR linearly regardless of the starting bus offset. Because of this, the config address decode must ignore starting bus offsets when mapping the BDF to the config space address. Fixes: 2a5a9c9a20f9 ("PCI: vmd: Add offset to bus numbers if necessary") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+
2019-09-16PCI: dwc: Add validation that PCIe core is set to correct modeJonathan Chocron2-0/+24
Some PCIe controllers can be set to either Host or EP according to some early boot FW. To make sure there is no discrepancy (e.g. FW configured the port to EP mode while the DT specifies it as a host bridge or vice versa), a check has been added for each mode. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-09-16PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driverJonathan Chocron2-0/+377
This driver is DT based and utilizes the DesignWare APIs. It allows using a smaller ECAM range for a larger bus range - usually an entire bus uses 1MB of address space, but the driver can use it for a larger number of buses. This is achieved by using a HW mechanism which allows changing the BUS part of the "final" outgoing config transaction. There are 2 HW regs, one which is basically a bitmask determining which bits to take from the AXI transaction itself and another which holds the complementary part programmed by the driver. All link initializations are handled by the boot FW. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-16dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge bindingJonathan Chocron2-1/+48
Document Amazon's Annapurna Labs PCIe host bridge. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2019-09-16PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root PortJonathan Chocron1-0/+18
The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some platforms it is configured to not advertise the capability at all, while on others it (mistakenly) does. This causes a panic during initialization by the pcieport driver, since it tries to configure the MSI-X capability. Specifically, when trying to access the MSI-X table a "non-existing addr" exception occurs. Example stacktrace snippet: SError Interrupt on CPU2, code 0xbf000000 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __pci_enable_msix_range+0x4e4/0x608 lr : __pci_enable_msix_range+0x498/0x608 sp : ffffff80117db700 x29: ffffff80117db700 x28: 0000000000000001 x27: 0000000000000001 x26: 0000000000000000 x25: ffffffd3e9d8c0b0 x24: 0000000000000000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 x20: 0000000000000000 x19: ffffffd3e9d8c000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffffff80116496c8 x14: ffffffd3e9844503 x13: ffffffd3e9844502 x12: 0000000000000038 x11: ffffffffffffff00 x10: 0000000000000040 x9 : ffffff801165e270 x8 : ffffff801165e268 x7 : 0000000000000002 x6 : 00000000000000b2 x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffd3e9844680 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xa8/0xcc panic+0x140/0x334 nmi_panic+0x6c/0x70 arm64_serror_panic+0x74/0x88 __pte_error+0x0/0x28 el1_error+0x84/0xf8 __pci_enable_msix_range+0x4e4/0x608 pci_alloc_irq_vectors_affinity+0xdc/0x150 pcie_port_device_register+0x2b8/0x4e0 pcie_portdrv_probe+0x34/0xf0 Notice that this quirk also disables MSI (which may work, but hasn't been tested nor has a current use case), since currently there is no standard way to disable only MSI-X. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-16PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root PortJonathan Chocron1-0/+6
The Amazon Annapurna Labs PCIe Root Port exposes the VPD capability, but there is no actual support for it. Trying to access the VPD (for example, as part of lspci -vv or when reading the vpd sysfs file), results in the following warning print: pcieport 0001:00:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-16PCI: Add ACS quirk for Amazon Annapurna Labs root portsAli Saidi1-0/+20
The Amazon's Annapurna Labs root ports don't advertise an ACS capability, but they don't allow peer-to-peer transactions and do validate bus numbers through the SMMU. Additionally, it's not possible for one RP to pass traffic to another RP. Signed-off-by: Ali Saidi <alisaidi@amazon.com> Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-16PCI: Add Amazon's Annapurna Labs vendor IDJonathan Chocron1-0/+2
Add Amazon's Annapurna Labs vendor ID to pci_ids.h. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-13MAINTAINERS: Add PCI native host/endpoint controllers designated reviewerLorenzo Pieralisi1-0/+1
Add Andrew Murray as designated reviewer for PCI native host and endpoint controller drivers. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <andrew.murray@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2019-09-10PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbersHaiyang Zhang1-1/+1
As recommended by Azure host team, the bytes 4, 5 have more uniqueness (info entropy) than bytes 8, 9 so use them as the PCI domain numbers. On older hosts, bytes 4, 5 can also be used -- no backward compatibility issues are introduced and the chance of collision is greatly reduced. In the rare cases of collision, the driver code detects and finds another number that is not in use. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Sasha Levin <sashal@kernel.org>
2019-09-08dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entriesVidya Sagar1-0/+8
Add optional bindings "vpcie3v3-supply" and "vpcie12v-supply" to describe regulators of a PCIe slot's supplies 3.3V and 12V provided the platform is designed to have regulator controlled slot supplies. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-08dt-bindings: PCI: tegra: Add sideband pins configuration entriesVidya Sagar1-0/+8
Add optional bindings "pinctrl-names" and "pinctrl-0" to describe pin configuration information of a particular PCIe controller. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-08PCI: tegra: Add Tegra194 PCIe supportVidya Sagar4-1/+1653
Add support for Synopsys DesignWare core IP based PCIe host controller present in the Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-07PCI: Get rid of dev->has_secondary_link flagMika Westerberg6-28/+37
In some systems, the Device/Port Type in the PCI Express Capabilities register incorrectly identifies upstream ports as downstream ports. d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") addressed this by adding pci_dev.has_secondary_link, which is set for downstream ports. But this is confusing because pci_pcie_type() sometimes gives the wrong answer, and it's not obvious that we should use pci_dev.has_secondary_link instead. Reduce the confusion by correcting the type of the port itself so that pci_pcie_type() returns the actual type regardless of what the Device/Port Type register claims it is. Update the users to call pci_pcie_type() and pcie_downstream_port() accordingly, and remove pci_dev.has_secondary_link completely. Link: https://lore.kernel.org/linux-pci/20190703133953.GK128603@google.com/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20190822085553.62697-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-07PCI: Make pcie_downstream_port() available outside of access.cMika Westerberg2-9/+9
pcie_downstream_port() is useful in other places where code needs to determine whether the PCIe port is downstream so make it available outside of access.c. Link: https://lore.kernel.org/r/20190822085553.62697-1-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-05PCI: Add ACS quirk for iProc PAXBAbhinav Ratna1-0/+14
iProc PAXB Root Ports don't advertise an ACS capability, but they do not allow peer-to-peer transactions between Root Ports. Add an ACS quirk so each Root Port can be in a separate IOMMU group. [bhelgaas: commit log, comment, use common implementation style] Link: https://lore.kernel.org/r/1566275985-25670-1-git-send-email-srinath.mannam@broadcom.com Signed-off-by: Abhinav Ratna <abhinav.ratna@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com>
2019-09-05PCI: Force trailing new line to resource_alignment_param in sysfsLogan Gunthorpe1-0/+10
When 'pci=resource_alignment=' is specified on the command line, there is no trailing new line. Then, when it's read through the corresponding sysfs attribute, there will be no newline and a cat command will not show correctly in a shell. If the parameter is set through sysfs a new line will be stored and it will 'cat' correctly. To solve this, append a new line character in the show function if one does not already exist. Link: https://lore.kernel.org/r/20190822161013.5481-4-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Move pci_[get|set]_resource_alignment_param() into their callersLogan Gunthorpe1-20/+12
Both the functions pci_get_resource_alignment_param() and pci_set_resource_alignment_param() are now only called in one place: resource_alignment_show() and resource_alignment_store() respectively. There is no value in this extra set of functions so move both into their callers respectively. [bhelgaas: fold in "GFP_KERNEL while atomic" fix from Christoph Hellwig <hch@infradead.org> https://lore.kernel.org/r/20190902075006.GB754@infradead.org] Link: https://lore.kernel.org/r/20190822161013.5481-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: pciehp: Refer to "Indicators" instead of "LEDs" in commentsBjorn Helgaas2-3/+3
The PCIe spec doesn't mention "green LEDs" or "amber LEDs". Replace those terms with "Power Indicator" and "Attention Indicator" so the comments match the spec language. Comment changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: pciehp: Remove pciehp_green_led_{on,off,blink}()Denis Efremov3-43/+7
Remove pciehp_green_led_{on,off,blink}() and use pciehp_set_indicators() instead, since the code is mostly the same. [bhelgaas: drop set_power_indicator() wrapper to reduce the number of interfaces] Link: https://lore.kernel.org/r/20190903111021.1559-5-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-09-05PCI: pciehp: Remove pciehp_set_attention_status()Denis Efremov4-28/+8
Remove pciehp_set_attention_status() and use pciehp_set_indicators() instead, since the code is mostly the same. Link: https://lore.kernel.org/r/20190903111021.1559-4-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-09-05PCI: pciehp: Combine adjacent indicator updatesDenis Efremov2-13/+17
Combine adjacent updates of power and attention indicators into a single pciehp_set_indicators() call. This sends one command to the hotplug controller instead of two. Link: https://lore.kernel.org/r/20190903111021.1559-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2019-09-05PCI: pciehp: Add pciehp_set_indicators() to set both indicatorsDenis Efremov2-0/+39
Add pciehp_set_indicators() to set power and attention indicators with a single register write. This is a minor optimization because we frequently set both indicators and this can do it with a single command. It also reduces the number of interfaces related to the indicators and makes them more discoverable because callers use the PCI_EXP_SLTCTL_ATTN_IND_* and PCI_EXP_SLTCTL_PWR_IND_* definitions directly. [bhelgaas: extend commit log, s/PCI_EXP_SLTCTL_.*_IND_NONE/INDICATOR_NOOP/ so they don't look like things defined by the spec, add function doc, mask commands to make it obvious we only send valid commands (pcie_do_write_cmd() does mask it, but requires more effort to verify)] Link: https://lore.kernel.org/r/20190903111021.1559-2-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Clean up resource_alignment parameter to not require static bufferLogan Gunthorpe1-18/+23
Clean up the 'resource_alignment' parameter code to use kstrdup() in the initcall routine instead of a static buffer that wastes memory regardless of whether the feature is used. This allows us to drop 'COMMAND_LINE_SIZE' bytes (typically 256-4096 depending on architecture) of static data. This is similar to what has been done for the 'disable_acs_redir' parameter. Link: https://lore.kernel.org/r/20190822161013.5481-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Use static const struct, not const static structKrzysztof Wilczynski1-2/+2
Move the static keyword to the front of declarations of pci_regs_behavior[] and pcie_cap_regs_behavior[], which resolves compiler warnings when building with "W=1": drivers/pci/pci-bridge-emul.c:41:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] const static struct pci_bridge_reg_behavior pci_regs_behavior[] = { ^ drivers/pci/pci-bridge-emul.c:176:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] const static struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = { ^ Link: https://lore.kernel.org/r/20190826151436.4672-1-kw@linux.com Link: https://lore.kernel.org/r/20190828131733.5817-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-09-05PCI: Add pci_info_ratelimited() to ratelimit PCI separatelyKrzysztof Wilczynski2-2/+5
Do not use printk_ratelimit() in drivers/pci/pci.c as it shares the rate limiting state with all other callers to the printk_ratelimit(). Add pci_info_ratelimited() (similar to pci_notice_ratelimited() added in the commit a88a7b3eb076 ("vfio: Use dev_printk() when possible")) and use it instead of printk_ratelimit() + pci_info(). Link: https://lore.kernel.org/r/20190825224616.8021-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI/IOV: Remove group write permission from sriov_numvfs, sriov_drivers_autoprobeKelsey Skunberg1-3/+2
Previously the sriov_numvfs and sriov_drivers_autoprobe sysfs files had 0664 permissions, which allowed group write. libvirt runs as root when dealing with PCI, and it chowns files needed by qemu, so group write permission should not be needed. Change these permissions from 0664 to 0644, which is what DEVICE_ATTR_RW() does by default. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20190905063226.43269-1-skunberg.kelsey@gmail.com Link: https://lore.kernel.org/r/850cf536-0b72-d78c-efaf-855dcb391087@redhat.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Donald Dutile <ddutile@redhat.com>
2019-09-04PCI: iproc: Propagate errors for optional PHYsThierry Reding1-6/+3
devm_phy_get() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_phy_optional_get() is a function that exactly does what's required here, so use that instead. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com
2019-09-04PCI: histb: Propagate errors for optional regulatorsThierry Reding1-2/+2
regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Shawn Guo <shawn.guo@linaro.org>
2019-09-04PCI: armada8x: Propagate errors for optional PHYsThierry Reding1-4/+3
devm_of_phy_get_by_index() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get_by_index() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-09-04PCI: imx6: Propagate errors for optional regulatorsThierry Reding1-2/+2
regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: kernel@pengutronix.de Cc: linux-imx@nxp.com
2019-09-04PCI: exynos: Propagate errors for optional PHYsThierry Reding1-1/+1
devm_of_phy_get() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-04PCI: rockchip: Propagate errors for optional regulatorsThierry Reding1-8/+8
regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Shawn Lin <shawn.lin@rock-chips.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org
2019-08-30PCI: Remove unnecessary returnsKrzysztof Wilczynski7-14/+1
Remove unnecessary "return" statements at the end of void functions. No functional change intended. Link: https://lore.kernel.org/r/20190825221039.6977-1-kw@linux.com Link: https://lore.kernel.org/r/20190826095143.21353-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-30PCI: OF: Correct of_irq_parse_pci() documentationLubomir Rintel1-1/+1
530210c7814e ("of/irq: Replace of_irq with of_phandle_args") changed the of_irq_parse_pci() parameter type but didn't change the corresponding documentation. Update the function doc to match. Link: https://lore.kernel.org/r/20190807132049.10304-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-30PCI: Fix typos and whitespace errorsBjorn Helgaas5-6/+5
Fix typos in drivers/pci. Comment and whitespace changes only. Link: https://lore.kernel.org/r/20190819115306.27338-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> # armada8k
2019-08-28PCI/ACPI: Remove unnecessary struct hotplug_program_opsKrzysztof Wilczynski3-102/+76
Move the ACPI-specific structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci-acpi.c as they are not used anywhere else. Then remove the struct hotplug_program_ops that has been shared between drivers/pci/probe.c and drivers/pci/pci-acpi.c from drivers/pci/pci.h as it is no longer needed. The struct hotplug_program_ops was added by 87fcf12e846a ("PCI/ACPI: Remove the need for 'struct hotplug_params'") and replaced previously used struct hotplug_params enabling the support for the _HPX Type 3 Setting Record that was added by f873c51a155a ("PCI/ACPI: Implement _HPX Type 3 Setting Record"). The new struct allowed for the static functions such program_hpx_type0(), program_hpx_type1(), etc., from the drivers/pci/probe.c to be called from the function pci_acpi_program_hp_params() in the drivers/pci/pci-acpi.c. Previously a programming of _HPX Type 0 was as follows: drivers/pci/probe.c: program_hpx_type0() ... pci_configure_device() hp_ops = { .program_type0 = program_hpx_type0, ... } pci_acpi_program_hp_params(&hp_ops) drivers/pci/pci-acpi.c: pci_acpi_program_hp_params(&hp_ops) acpi_run_hpx(hp_ops) decode_type0_hpx_record() hp_ops->program_type0 # program_hpx_type0() called via hp_ops After the ACPI-specific functions, structs, enums, etc., have been moved to drivers/pci/pci-acpi.c there is no need for the hotplug_program_ops as all of the _HPX Type 0, 1, 2 and 3 are directly accessible. Link: https://lore.kernel.org/r/20190827094951.10613-4-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.cKrzysztof Wilczynski4-367/+375
Move program_hpx_type0(), program_hpx_type1(), etc., and enums hpx_type3_dev_type, hpx_type3_fn_type and hpx_type3_cfg_loc to drivers/pci/pci-acpi.c as these functions and enums are ACPI-specific. Move structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci.h as these are shared between drivers/pci/pci-acpi.c and drivers/pci/probe.c. Link: https://lore.kernel.org/r/20190827094951.10613-3-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*Krzysztof Wilczynski3-66/+64
The names of the hpp_type0, hpp_type1 and hpp_type2 structs suggest that they're related to _HPP, when in fact they're related to _HPX. The struct hpp_type0 denotes an _HPX Type 0 setting record that supersedes the _HPP setting record, and it has been used interchangeably for _HPP as per the ACPI specification (see version 6.3, section 6.2.9.1) which states that it should be applied to PCI, PCI-X and PCI Express devices, with settings being ignored if they are not applicable. Rename them to hpx_type0, hpx_type1 and hpx_type2 to reflect their relation to _HPX rather than _HPP. Link: https://lore.kernel.org/r/20190827094951.10613-2-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI: Move ASPM declarations to linux/pci.hKrzysztof Wilczynski17-51/+18
Move ASPM definitions and function prototypes from include/linux/pci-aspm.h to include/linux/pci.h so users only need to include <linux/pci.h>: PCIE_LINK_STATE_L0S PCIE_LINK_STATE_L1 PCIE_LINK_STATE_CLKPM pci_disable_link_state() pci_disable_link_state_locked() pcie_no_aspm() No functional changes intended. Link: https://lore.kernel.org/r/20190827095620.11213-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-22arm64: dts: fsl: Remove num-lanes property from PCIe nodesHou Zhiqiang5-17/+0
Remove the num-lanes property to avoid the driver setting the link width. On FSL Layerscape SoCs, the number of lanes assigned to PCIe controller is not fixed, it is determined by the selected SerDes protocol in the RCW (Reset Configuration Word). The PCIe link training is completed automatically through the selected SerDes protocol - the link width set-up is updated by hardware after power on reset, so the num-lanes property is not needed for Layerscape PCIe. The current num-lanes property was added erroneously, which actually indicates the maximum lanes the PCIe controller can support up to, instead of the lanes assigned to the PCIe controller. The link width set by SerDes protocol will be overridden by the num-lanes property, hence the subsequent re-training will fail when the assigned lanes do not match the value in the num-lanes property. Remove the property to fix the issue Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-22ARM: dts: ls1021a: Remove num-lanes property from PCIe nodesHou Zhiqiang1-2/+0
Remove the num-lanes property to avoid the driver setting the link width. On FSL Layerscape SoCs, the number of lanes assigned to PCIe controller is not fixed, it is determined by the selected SerDes protocol in the RCW (Reset Configuration Word). The PCIe link training is completed automatically through the selected SerDes protocol - the link width set-up is updated by hardware after power on reset, so the num-lanes property is not needed for Layerscape PCIe. The current num-lanes property was added erroneously, which actually indicates the maximum lanes the PCIe controller can support up to, instead of the lanes assigned to the PCIe controller. The link width set by SerDes protocol will be overridden by the num-lanes property, hence the subsequent re-training will fail when the assigned lanes do not match the value in the num-lanes property. Remove the property to fix the issue. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-22PCI: dwc: Return directly when num-lanes is not foundHou Zhiqiang1-2/+4
The num-lanes is optional since it is not needed on some platforms that bring up the link in firmware. The link programming is based on the num-lanes properties (which is optional); if it is not present code must return instead of fiddling with the lanes value to print an error message. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-22dt-bindings: PCI: designware: Remove the num-lanes from Required propertiesHou Zhiqiang1-1/+0
The num-lanes is not a mandatory property, e.g. on FSL Layerscape SoCs, the PCIe link training is completed automatically based on the selected SerDes protocol, it does not need the num-lanes to set-up the link width. Currently it is both a Required and Optional property, let's remove it from the Required properties. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-21PCI: mobiveil: Fix the CPU base address setup in inbound windowHou Zhiqiang1-3/+7
Current code erroneously sets-up the CPU base address through the parameter 'pci_addr', which is passed to initialize the CPU (AXI) base address of the inbound window where the controller maps the PCI address space into CPU physical address space; furthermore, it also truncates it by programming only the lower 32-bit value into the inbound CPU address register. Fix both issues by introducing a new parameter 'u64 cpu_addr' to initialize both lower 32-bit and upper 32-bit of the CPU physical base address mapping PCI inbound transactions into CPU (AXI) ones. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.