aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/sched-migration.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2011-01-31[media] rc: use time unit conversion macros correctlyJarod Wilson3-12/+12
Due to my own stupidity, some of the wrong time unit conversion macros were being used inside some of the IR drivers I've been working on. Fix that, and convert over some additional places to also use the macros. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] rc/ir-lirc-codec: add back debug spewJarod Wilson1-1/+5
Some occasionally useful debug spew disappeared as part of a feature update a while back, and I'm finding myself in need of it again to help diagnose some issues. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] ir-kbd-i2c: improve remote behavior with z8 behind usbJarod Wilson2-1/+13
Add the same "are you ready?" i2c_master_send() poll command to get_key_haup_xvr found in lirc_zilog, which is apparently seen in the Windows driver for the PVR-150 w/a z8. This stabilizes what is received from both the HD-PVR and HVR-1950, even with their polling intervals at the default of 100, thus the removal of the custom 260ms polling_interval in pvrusb2-i2c-core.c. Acked-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Mike Isely <isely@isely.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_sendJarod Wilson1-6/+26
Both the HD-PVR and HVR-1950, driven by the hdpvr and pvrusb2 drivers respectively, have a zilog z8 chip exposed via i2c. These are both usb-connected devices, and on both of them, back-to-back i2c_master_send calls that work fine with a z8 on a pci card fail with a -EIO, as the chip isn't yet ready from the prior command. To cope with that, add a delay and retry loop where necessary. Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] hdpvr: fix up i2c device registrationJarod Wilson3-16/+41
We have to actually call i2c_new_device() once for each of the rx and tx addresses. Also improve error-handling and device remove i2c cleanup. Reviewed-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] rc/mce: add mappings for missing keysJarod Wilson1-0/+6
Per http://mediacenterguides.com/book/export/html/31 and investigation by Erin, we were missing these last three mappings to complete the mce key table. Lets remedy that. Reported-by: Erin Simonds <fisslefink@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] gspca - zc3xx: Discard the partial framesJean-François Moine1-2/+10
In some cases, some frames may not end with the JPEG end of frame. Being not complete, they are now discarded. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] gspca - zc3xx: Fix bad images with the sensor hv7131rJean-François Moine1-2/+15
The problem was introduced by the commit 2af0b4c60cc0daf0. Some registers were no more initialized. Tested-by: <Giovanni Scafora giovanni@archlinux.org> Tested-by: <Sergey Manucharian sm@ingeniware.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] gspca - zc3xx: Bad delay when given by a tableJean-François Moine1-1/+1
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-21Linux 2.6.38-rc2Linus Torvalds1-1/+1
2011-01-21KEYS: Fix up comments in key management codeDavid Howells11-366/+777
Fix up comments in the key management code. No functional changes. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21KEYS: Do some style cleanup in the key management code.David Howells10-248/+80
Do a bit of a style clean up in the key management code. No functional changes. Done using: perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c To remove /*****/ lines, remove comments on the closing brace of a function to name the function and remove blank lines before the closing brace of a function. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21mm: System without MMU do not need pte_mkwriteMichal Simek1-0/+2
The patch "thp: export maybe_mkwrite" (commit 14fd403f2146) breaks systems without MMU. Error log: CC arch/microblaze/mm/init.o In file included from include/linux/mman.h:14, from arch/microblaze/mm/consistent.c:24: include/linux/mm.h: In function 'maybe_mkwrite': include/linux/mm.h:482: error: implicit declaration of function 'pte_mkwrite' include/linux/mm.h:482: error: incompatible types in assignment Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21MAINTAINERS: Update Roland Dreier's email addressRoland Dreier1-1/+1
The cisco.com address will stop working soon, and besides no one can remember the second "d" in "rolandd" or how to spell "rdreier." Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21xen: p2m: correctly initialize partial p2m leafStefan Bader1-1/+19
After changing the p2m mapping to a tree by commit 58e05027b530ff081ecea68e38de8d59db8f87e0 xen: convert p2m to a 3 level tree and trying to boot a DomU with 615MB of memory, the following crash was observed in the dump: kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c0107397>] xen_set_pte+0x27/0x60 *pdpt = 0000000000000000 *pde = 0000000000000000 Adding further debug statements showed that when trying to set up pfn=0x26700 the returned mapping was invalid. pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003) pfn=0x26700 calling set_pte(0xc1fe7800, 0x3) Although the last_pfn obtained from the startup info is 0x26700, which should in turn not be hit, the additional 8MB which are added as extra memory normally seem to be ok. This lead to looking into the initial p2m tree construction, which uses the smaller value and assuming that there is other code handling the extra memory. When the p2m tree is set up, the leaves are directly pointed to the array which the domain builder set up. But if the mapping is not on a boundary that fits into one p2m page, this will result in the last leaf being only partially valid. And as the invalid entries are not initialized in that case, things go badly wrong. I am trying to fix that by checking whether the current leaf is a complete map and if not, allocate a completely new page and copy only the valid pointers there. This may not be the most efficient or elegant solution, but at least it seems to allow me booting DomUs with memory assignments all over the range. BugLink: http://bugs.launchpad.net/bugs/686692 [v2: Redid a bit of commit wording and fixed a compile warning] Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-21um: Use generic irq KconfigThomas Gleixner1-5/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeff Dike <jdike@addtoit.com>
2011-01-21tile: Use generic irq KconfigThomas Gleixner1-29/+21
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Chris Metcalf <cmetcalf@tilera.com>
2011-01-21sparc: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: "David S. Miller" <davem@davemloft.net>
2011-01-21score: Use generic irq KconfigThomas Gleixner1-3/+4
No functional change Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Chen Liqin <liqin.chen@sunplusct.com>
2011-01-21powerpc: Use generic irq KconfigThomas Gleixner1-21/+3
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21parisc: Use generic irq KconfigThomas Gleixner1-10/+4
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2011-01-21mn10300: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Howells <dhowells@redhat.com>
2011-01-21microblaze: Use generic irq KconfigThomas Gleixner1-6/+2
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michal Simek <monstr@monstr.eu>
2011-01-21m68knommu: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Ungerer <gerg@uclinux.org>
2011-01-21ia64: Use generic irq KconfigThomas Gleixner1-19/+4
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com>
2011-01-21frv: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Howells <dhowells@redhat.com>
2011-01-21blackfin: Use generic irq KconfigThomas Gleixner1-11/+3
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Frysinger <vapier@gentoo.org>
2011-01-21alpha: Use generic irq KconfigThomas Gleixner1-13/+3
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net>
2011-01-21genirq: Remove __do_IRQThomas Gleixner18-183/+0
All architectures are finally converted. Remove the cruft. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Mike Frysinger <vapier@gentoo.org> Cc: David Howells <dhowells@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Michal Simek <monstr@monstr.eu> Acked-by: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com>
2011-01-21m32r: Convert to generic irq KconfigThomas Gleixner1-8/+3
Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as we have converted all irq_chip functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert usrv platform irq handlingThomas Gleixner1-48/+40
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput_lcdpld irq chipThomas Gleixner1-26/+16
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput lanpld irq chipThomas Gleixner1-20/+12
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput pld irq chipThomas Gleixner1-26/+20
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput irq chipThomas Gleixner1-31/+27
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert oaks32r irq chipsThomas Gleixner1-25/+22
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert mappi3 irq chipThomas Gleixner1-31/+31
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert mappi2 irq chipThomas Gleixner1-29/+30
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert mappi irq chipsThomas Gleixner1-27/+26
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32700ut lcdpld irq chipThomas Gleixner1-20/+12
Convert the irq chip to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32700ut lanpld irq chipThomas Gleixner1-20/+12
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32700ut pld irq chipThomas Gleixner1-28/+20
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32104ut irq chipThomas Gleixner1-29/+27
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32104ut irq handlingThomas Gleixner1-25/+21
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Cleanup direct irq_desc accessThomas Gleixner9-307/+83
The irq descriptors are already initialized by the generic code. Remove the redundant init code and set the irq chip with the proper accessor function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21cris: Use generic irq KconfigThomas Gleixner2-5/+3
Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as we have converted all irq_chip functions. Fix the fallout in show_interrupts(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mikael Starvik <starvik@axis.com>
2011-01-21cris: Convert V32 interrupt handlingThomas Gleixner1-35/+15
Convert the irq chip functions and install handle_simple_irq for each interrupt to get rid of __do_IRQ() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mikael Starvik <starvik@axis.com>
2011-01-21cris: Convert V10 interrupt handlingThomas Gleixner1-31/+10
Convert the irq_chip functions and install handle_simple_irq for each interrupt. This converts V10 to the flow handling and lets us remove __do_IRQ(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mikael Starvik <starvik@axis.com>
2011-01-21cris: Use irq handling wrapperThomas Gleixner1-2/+2
Use the wrapper around __do_IRQ() so we can convert V10 and V32 seperately. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mikael Starvik <starvik@axis.com>
2011-01-21h8300: Use generic irq KconfigThomas Gleixner2-5/+3
Switch to the generic irq Kconfig. h8300 has all irq chips converted to the new functions, so select the GENERIC_HARDIRQS_NO_DEPRECATED switch as well. Fixup the resulting fallout in show_interrupts(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.