aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/syscall-counts-by-pid.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2013-03-13zcache: convert to idr_alloc()Tejun Heo1-15/+10
idr_get_new*() and friends are about to be deprecated. Convert to the new idr_alloc() interface. Only compile tested. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13mlx4: remove leftover idr_pre_get() callTejun Heo1-1/+0
Commit 6a9200603d76 ("IB/mlx4: convert to idr_alloc()") forgot to remove idr_pre_get() call in mlx4_ib_cm_paravirt_init(). It's unnecessary and idr_pre_get() will soon be deprecated. Remove it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13workqueue: convert to idr_alloc()Tejun Heo1-3/+4
idr_get_new*() and friends are about to be deprecated. Convert to the new idr_alloc() interface. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13nfsd: convert to idr_alloc()Tejun Heo1-3/+2
idr_get_new*() and friends are about to be deprecated. Convert to the new idr_alloc() interface. Only compile-tested. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: J. Bruce Fields <bfields@redhat.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13nfsd: remove unused get_new_stid()Tejun Heo1-31/+0
get_new_stid() is no longer used since commit 3abdb607125 ("nfsd4: simplify idr allocation"). Remove it. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORERAndrew Morton1-1/+1
__ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and later kernels, per Kees. Cc: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13signal: always clear sa_restorer on execveKees Cook1-0/+3
When the new signal handlers are set up, the location of sa_restorer is not cleared, leaking a parent process's address space location to children. This allows for a potential bypass of the parent's ASLR by examining the sa_restorer value returned when calling sigaction(). Based on what should be considered "secret" about addresses, it only matters across the exec not the fork (since the VMAs haven't changed until the exec). But since exec sets SIG_DFL and keeps sa_restorer, this is where it should be fixed. Given the few uses of sa_restorer, a "set" function was not written since this would be the only use. Instead, we use __ARCH_HAS_SA_RESTORER, as already done in other places. Example of the leak before applying this patch: $ cat /proc/$$/maps ... 7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... $ ./leak ... 7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... 1 0 (nil) 0x7fb9f30b94a0 2 4000000 (nil) 0x7f278bcaa4a0 3 4000000 (nil) 0x7f278bcaa4a0 4 0 (nil) 0x7fb9f30b94a0 ... [akpm@linux-foundation.org: use SA_RESTORER for backportability] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13mm: remove_memory(): fix end_pfn settingToshi Kani1-1/+1
remove_memory() calls walk_memory_range() with [start_pfn, end_pfn), where end_pfn is exclusive in this range. Therefore, end_pfn needs to be set to the next page of the end address. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13include/linux/res_counter.h needs errno.hAndrew Morton1-0/+1
alpha allmodconfig: In file included from mm/memcontrol.c:28: include/linux/res_counter.h: In function 'res_counter_set_limit': include/linux/res_counter.h:203: error: 'EBUSY' undeclared (first use in this function) include/linux/res_counter.h:203: error: (Each undeclared identifier is reported only once include/linux/res_counter.h:203: error: for each function it appears in.) Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: Frederic Weisbecker <fweisbec@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12futex: fix kernel-doc notation and spelloRandy Dunlap1-23/+23
Fix kernel-doc warning in futex.c and convert 'Returns' to the new Return: kernel-doc notation format. Warning(kernel/futex.c:2286): Excess function parameter 'clockrt' description in 'futex_wait_requeue_pi' Fix one spello. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12signals: fix new kernel-doc warningsRandy Dunlap1-1/+1
Fix new kernel-doc warnings in kernel/signal.c: Warning(kernel/signal.c:2689): No description found for parameter 'uset' Warning(kernel/signal.c:2689): Excess function parameter 'set' description in 'sys_rt_sigpending' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12idr: fix new kernel-doc warningsRandy Dunlap2-2/+1
Fix new kernel-doc warnings in idr: Warning(include/linux/idr.h:113): No description found for parameter 'idr' Warning(include/linux/idr.h:113): Excess function parameter 'idp' description in 'idr_find' Warning(lib/idr.c:232): Excess function parameter 'id' description in 'sub_alloc' Warning(lib/idr.c:232): Excess function parameter 'id' description in 'sub_alloc' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12Select VIRT_TO_BUS directly where neededStephen Rothwell24-31/+28
In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keysMathieu Desnoyers3-18/+9
Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to compat_process_vm_rw() shows that the compatibility code requires an explicit "access_ok()" check before calling compat_rw_copy_check_uvector(). The same difference seems to appear when we compare fs/read_write.c:do_readv_writev() to fs/compat.c:compat_do_readv_writev(). This subtle difference between the compat and non-compat requirements should probably be debated, as it seems to be error-prone. In fact, there are two others sites that use this function in the Linux kernel, and they both seem to get it wrong: Now shifting our attention to fs/aio.c, we see that aio_setup_iocb() also ends up calling compat_rw_copy_check_uvector() through aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to be missing. Same situation for security/keys/compat.c:compat_keyctl_instantiate_key_iov(). I propose that we add the access_ok() check directly into compat_rw_copy_check_uvector(), so callers don't have to worry about it, and it therefore makes the compat call code similar to its non-compat counterpart. Place the access_ok() check in the same location where copy_from_user() can trigger a -EFAULT error in the non-compat code, so the ABI behaviors are alike on both compat and non-compat. While we are here, fix compat_do_readv_writev() so it checks for compat_rw_copy_check_uvector() negative return values. And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error handling. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12vfs: fix pipe counter breakageAl Viro1-0/+3
If you open a pipe for neither read nor write, the pipe code will not add any usage counters to the pipe, causing the 'struct pipe_inode_info" to be potentially released early. That doesn't normally matter, since you cannot actually use the pipe, but the pipe release code - particularly fasync handling - still expects the actual pipe infrastructure to all be there. And rather than adding NULL pointer checks, let's just disallow this case, the same way we already do for the named pipe ("fifo") case. This is ancient going back to pre-2.4 days, and until trinity, nobody naver noticed. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12ARM: spear3xx: Use correct pl080 header fileArnd Bergmann1-1/+1
The definitions have move around recently, causing build errors in spear3xx for all configurations: spear3xx.c:47:5: error: 'PL080_BSIZE_16' undeclared here (not in a function) spear3xx.c:47:23: error: 'PL080_CONTROL_SB_SIZE_SHIFT' undeclared here (not in a function) spear3xx.c:48:22: error: 'PL080_CONTROL_DB_SIZE_SHIFT' undeclared here (not in a function) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Rubini <rubini@gnudd.com> Cc: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12keys: fix race with concurrent install_user_keyrings()David Howells1-1/+1
This fixes CVE-2013-1792. There is a race in install_user_keyrings() that can cause a NULL pointer dereference when called concurrently for the same user if the uid and uid-session keyrings are not yet created. It might be possible for an unprivileged user to trigger this by calling keyctl() from userspace in parallel immediately after logging in. Assume that we have two threads both executing lookup_user_key(), both looking for KEY_SPEC_USER_SESSION_KEYRING. THREAD A THREAD B =============================== =============================== ==>call install_user_keyrings(); if (!cred->user->session_keyring) ==>call install_user_keyrings() ... user->uid_keyring = uid_keyring; if (user->uid_keyring) return 0; <== key = cred->user->session_keyring [== NULL] user->session_keyring = session_keyring; atomic_inc(&key->usage); [oops] At the point thread A dereferences cred->user->session_keyring, thread B hasn't updated user->session_keyring yet, but thread A assumes it is populated because install_user_keyrings() returned ok. The race window is really small but can be exploited if, for example, thread B is interrupted or preempted after initializing uid_keyring, but before doing setting session_keyring. This couldn't be reproduced on a stock kernel. However, after placing systemtap probe on 'user->session_keyring = session_keyring;' that introduced some delay, the kernel could be crashed reliably. Fix this by checking both pointers before deciding whether to return. Alternatively, the test could be done away with entirely as it is checked inside the mutex - but since the mutex is global, that may not be the best way. Signed-off-by: David Howells <dhowells@redhat.com> Reported-by: Mateusz Guzik <mguzik@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-03-11libceph: fix decoding of pgidsSage Weil1-13/+29
In 4f6a7e5ee1393ec4b243b39dac9f36992d161540 we effectively dropped support for the legacy encoding for the OSDMap and incremental. However, we didn't fix the decoding for the pgid. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2013-03-11Arm: socfpga: pl330: Add #dma-cells for generic dma binding supportPadmavathi Venna1-0/+3
This patch adds #dma-cells property to PL330 DMA controller nodes for supporting generic dma dt bindings on SOCFPGA platform. #dma-channels and #dma-requests are not required now but added in advance. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-11ARM: multiplatform: Sort the max gpio numbers.Maxime Ripard1-2/+5
When building a multiplatform kernel, we could end up with a smaller number of GPIOs than the one required by the platform the kernel was running on. Sort the max GPIO number by descending order so that we always take the highest number required. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-11xen/acpi: remove redundant acpi/acpi_drivers.h includeLiu Jinsong1-1/+0
It's redundant since linux/acpi.h has include it when CONFIG_ACPI enabled, and when CONFIG_ACPI disabled it will trigger compiling warning In file included from drivers/xen/xen-stub.c:28:0: include/acpi/acpi_drivers.h:103:31: warning: 'struct acpi_device' declared inside parameter list [enabled by default] include/acpi/acpi_drivers.h:103:31: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] include/acpi/acpi_drivers.h:107:43: warning: 'struct acpi_pci_root' declared inside parameter list [enabled by default] Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-11xen: arm: mandate EABI and use generic atomic operations.Ian Campbell2-22/+6
Rob Herring has observed that c81611c4e96f "xen: event channel arrays are xen_ulong_t and not unsigned long" introduced a compile failure when building without CONFIG_AEABI: /tmp/ccJaIZOW.s: Assembler messages: /tmp/ccJaIZOW.s:831: Error: even register required -- `ldrexd r5,r6,[r4]' Will Deacon pointed out that this is because OABI does not require even base registers for 64-bit values. We can avoid this by simply using the existing atomic64_xchg operation and the same containerof trick as used by the cmpxchg macros. However since this code is used on memory which is shared with the hypervisor we require proper atomic instructions and cannot use the generic atomic64 callbacks (which are based on spinlocks), therefore add a dependency on !GENERIC_ATOMIC64. Since we already depend on !CPU_V6 there isn't much downside to this. While thinking about this we also observed that OABI has different struct alignment requirements to EABI, which is a problem for hypercall argument structs which are shared with the hypervisor and which must be in EABI layout. Since I don't expect people to want to run OABI kernels on Xen depend on CONFIG_AEABI explicitly too (although it also happens to be enforced by the !GENERIC_ATOMIC64 requirement too). Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robherring2@gmail.com> Acked-by: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-11ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"Paul Bolle1-1/+1
Commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) had a typo that DEBUG_IMX50_IMX53_UART should be DEBUG_IMX53_UART. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-11s390: Fix a header dependencies related build errorLi Zefan1-0/+1
Commit 877c685607925238e302cd3aa38788dca6c1b226 ("perf: Remove include of cgroup.h from perf_event.h") caused this build failure if PERF_EVENTS is enabled: In file included from arch/s390/include/asm/perf_event.h:9:0, from include/linux/perf_event.h:24, from kernel/events/ring_buffer.c:12: arch/s390/include/asm/cpu_mf.h: In function 'qctri': arch/s390/include/asm/cpu_mf.h:61:12: error: 'EINVAL' undeclared (first use in this function) cpu_mf.h had an implicit errno.h dependency, which was added indirectly via cgroups.h but not anymore. Add it explicitly. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: http://lkml.kernel.org/r/51385F79.7000106@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-11um: Use tty_port in SIGWINCH handlerRichard Weinberger5-18/+22
The tty below tty_port might get destroyed by the tty layer while we hold a reference to it. So we have to carry tty_port around... Signed-off-by: Richard Weinberger <richard@nod.at>
2013-03-11um: Use tty_port_operations->destructRichard Weinberger3-14/+14
As we setup the SIGWINCH handler in tty_port_operations->activate it makes sense to tear down it in ->destruct. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-03-11um: fix build failure due to mess-up of sig_info protorypeSergei Trofimovich1-1/+1
arch/um/os-Linux/signal.c:18:8: error: conflicting types for 'sig_info' In file included from /home/slyfox/linux-2.6/arch/um/os-Linux/signal.c:12:0: arch/um/include/shared/as-layout.h:64:15: note: previous declaration of 'sig_info' was here Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> CC: Jeff Dike <jdike@addtoit.com> CC: Richard Weinberger <richard@nod.at> CC: "Martin Pärtel" <martin.partel@gmail.com> CC: Al Viro <viro@zeniv.linux.org.uk> CC: user-mode-linux-devel@lists.sourceforge.net CC: user-mode-linux-user@lists.sourceforge.net CC: linux-kernel@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at>
2013-03-11um: add missing declaration of 'getrlimit()' and friendsSergei Trofimovich1-0/+2
arch/um/os-Linux/start_up.c: In function 'check_coredump_limit': arch/um/os-Linux/start_up.c:338:16: error: storage size of 'lim' isn't known arch/um/os-Linux/start_up.c:339:2: error: implicit declaration of function 'getrlimit' [-Werror=implicit-function-declaration] Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> CC: Jeff Dike <jdike@addtoit.com> CC: Richard Weinberger <richard@nod.at> CC: Al Viro <viro@zeniv.linux.org.uk> CC: user-mode-linux-devel@lists.sourceforge.net CC: user-mode-linux-user@lists.sourceforge.net CC: linux-kernel@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at>
2013-03-11net : enable tx time stamping in the vde driver.Paul Chavent1-0/+2
This new version moves the skb_tx_timestamp in the main uml driver. This should avoid the need to call this function in each transport (vde, slirp, tuntap, ...). It also add support for ethtool get_ts_info. Signed-off-by: Paul Chavent <paul.chavent@onera.fr> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2013-03-11hostfs: fix a not needed double checkMarco Stornelli1-8/+1
With the commit 3be2be0a32c18b0fd6d623cda63174a332ca0de1 we removed vmtruncate, but actaully there is no need to call inode_newsize_ok() because the checks are already done in inode_change_ok() at the begin of the function. Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2013-03-11ARM: imx: pll1_sys should be an initial on clkShawn Guo1-1/+1
We always boot from PLL1, so let's have pll1_sys in the clks_init_on list to have clk prepare/enable use count match the hardware status, so that drivers managing pll1_sys like cpufreq can get the use count right from the start. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-10Input: mms114 - Fix regulator enable and disable pathsMark Brown1-9/+25
When it uses regulators the mms114 driver checks to see if it managed to acquire regulators and ignores errors. This is not the intended usage and not great style in general. Since the driver already refuses to probe if it fails to allocate the regulators simply make the enable and disable calls unconditional and add appropriate error handling, including adding cleanup of the regulators if setup_reg() fails. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-10Input: ads7864 - check return value of regulator enableMark Brown1-1/+6
At least print a warning if we can't power the device up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-10Input: tc3589x-keypad - fix keymap sizeRabin Vincent1-4/+4
The keymap size used by tc3589x is too low, leading to the driver overwriting other people's memory. Fix this by making the driver use the automatically allocated keymap provided by matrix_keypad_build_keymap() instead of allocating one on its own. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-10Linux 3.9-rc2Linus Torvalds1-1/+1
2013-03-11drm/nv50: use correct tiling methods for m2mf buffer movesMarcin Slusarz1-2/+2
Currently used only on original nv50, nvaa and nvac. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-11drm/nouveau: idle channel before releasing notify objectMarcin Slusarz1-0/+5
Unmapping it while it's still in use (e.g. by M2MF) can lead to page faults and a lot of TRAP_M2MF spam in dmesg. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-11drm/nouveau: fix regression in vblankingMaarten Lankhorst1-2/+2
nv50_vblank_enable/disable got switched from NV50_PDISPLAY_INTR_EN_1_VBLANK_CRTC_0 (4) << head to 1 << head, which is wrong. 4 << head is the correct value. Fixes regression with vblanking since 1d7c71a3e2f77 "drm/nouveau/disp: port vblank handling to event interface" Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-11drm/nv50: encoder creation failure doesn't mean full init failureBen Skeggs1-0/+1
It's meant as a notification only, not a fatal error. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-106lowpan: Fix endianness issue in is_addr_link_local().YOSHIFUJI Hideaki / 吉藤英明1-1/+1
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10rrunner.c: fix possible memory leak in rr_init_one()David Oostdyk1-0/+3
In the event that register_netdev() failed, the rrpriv->evt_ring allocation would have not been freed. Signed-off-by: David Oostdyk <daveo@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10dcbnl: fix various netlink info leaksMathias Krause1-0/+8
The dcb netlink interface leaks stack memory in various places: * perm_addr[] buffer is only filled at max with 12 of the 32 bytes but copied completely, * no in-kernel driver fills all fields of an IEEE 802.1Qaz subcommand, so we're leaking up to 58 bytes for ieee_ets structs, up to 136 bytes for ieee_pfc structs, etc., * the same is true for CEE -- no in-kernel driver fills the whole struct, Prevent all of the above stack info leaks by properly initializing the buffers/structures involved. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10rtnl: fix info leak on RTM_GETLINK request for VF devicesMathias Krause1-0/+1
Initialize the mac address buffer with 0 as the driver specific function will probably not fill the whole buffer. In fact, all in-kernel drivers fill only ETH_ALEN of the MAX_ADDR_LEN bytes, i.e. 6 of the 32 possible bytes. Therefore we currently leak 26 bytes of stack memory to userland via the netlink interface. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10bridge: fix mdb info leaksMathias Krause1-0/+4
The bridging code discloses heap and stack bytes via the RTM_GETMDB netlink interface and via the notify messages send to group RTNLGRP_MDB afer a successful add/del. Fix both cases by initializing all unset members/padding bytes with memset(0). Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09Input: wacom - add support for 0x10dStephan Frank1-0/+4
It is a Wacom device found in Fujitsu Lifebook T902. Signed-off-by: Stephan Frank <sfrank@cs.tu-berlin.de> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-09Atmel MXT touchscreen: increase reset timeoutsLinus Torvalds1-2/+2
There is a more complete atmel patch-series out by Nick Dyer that fixes this and other things, but in the meantime this is the minimal thing to get the touchscreen going on (at least my) Pixel Chromebook. Not that I want my dirty fingers near that beautiful screen, but it seems that a non-initialized touchscreen will also end up being a constant wakeup source, so you have to disable it to go to sleep. And it's easier to just fix the initialization sequence. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-09sunrpc: don't attempt to cancel unitialized workJ. Bruce Fields1-5/+10
As of dc107402ae06286a9ed33c32daf3f35514a7cb8d "SUNRPC: make AF_LOCAL connect synchronous", we no longer initialize connect_worker in the AF_LOCAL case, resulting in warnings like: WARNING: at lib/debugobjects.c:261 debug_print_object+0x8c/0xb0() Hardware name: Bochs ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x20 Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nfsd auth_rpcgss nfs_acl lockd sunrpc Pid: 4816, comm: nfsd Tainted: G W 3.8.0-rc2-00049-gdc10740 #801 Call Trace: [<ffffffff8156ec00>] ? free_obj_work+0x60/0xa0 [<ffffffff81046aaf>] warn_slowpath_common+0x7f/0xc0 [<ffffffff81046ba6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff8156eccc>] debug_print_object+0x8c/0xb0 [<ffffffff81055030>] ? timer_debug_hint+0x10/0x10 [<ffffffff8156f7e3>] debug_object_assert_init+0xe3/0x120 [<ffffffff81057ebb>] del_timer+0x2b/0x80 [<ffffffff8109c4e6>] ? mark_held_locks+0x86/0x110 [<ffffffff81065a29>] try_to_grab_pending+0xd9/0x150 [<ffffffff81065b57>] __cancel_work_timer+0x27/0xc0 [<ffffffff81065c03>] cancel_delayed_work_sync+0x13/0x20 [<ffffffffa0007067>] xs_destroy+0x27/0x80 [sunrpc] [<ffffffffa00040d8>] xprt_destroy+0x78/0xa0 [sunrpc] [<ffffffffa0006241>] xprt_put+0x21/0x30 [sunrpc] [<ffffffffa00030cf>] rpc_free_client+0x10f/0x1a0 [sunrpc] [<ffffffffa0002ff3>] ? rpc_free_client+0x33/0x1a0 [sunrpc] [<ffffffffa0002f7e>] rpc_release_client+0x6e/0xb0 [sunrpc] [<ffffffffa000325d>] rpc_shutdown_client+0xfd/0x1b0 [sunrpc] [<ffffffffa0017196>] rpcb_put_local+0x106/0x130 [sunrpc] ... Acked-by: "Myklebust, Trond" <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-09proc: Use nd_jump_link in proc_ns_follow_linkEric W. Biederman1-6/+6
Update proc_ns_follow_link to use nd_jump_link instead of just manually updating nd.path.dentry. This fixes the BUG_ON(nd->inode != parent->d_inode) reported by Dave Jones and reproduced trivially with mkdir /proc/self/ns/uts/a. Sigh it looks like the VFS change to require use of nd_jump_link happend while proc_ns_follow_link was baking and since the common case of proc_ns_follow_link continued to work without problems the need for making this change was overlooked. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-08Platform: x86: chromeos_laptop : Add basic platform data for atmel devicesBenson Leung1-2/+39
Add basic platform data to get the current upstream driver working with the 224s touchpad and 1664s touchscreen. We will be using NULL config so we will use the settings from the devices' NVRAMs. Signed-off-by: Benson Leung <bleung@chromium.org> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-08Input: atmel_mxt_ts - Support for touchpad variantDaniel Kurtz2-2/+67
This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.