aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/syscall-counts.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-28ARM: config: keystone: enable AEMIF/NAND supportIvan Khoronzhuk1-0/+2
Keystone SoC uses the same NAND driver as Davinci, so enable Davinci NAND and AEIMF that provides interface for it. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-02-26ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfigKumar Gala1-0/+10
Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and serial console as part of the standard multi_v7_defconfig. Signed-off-by: Kumar Gala <galak@codeaurora.org> [khilman: removed non-qcom changes] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-02-18ARM: shmobile: r7s72100: update defconfig for I2C usageWolfram Sang1-1/+3
Select the correct I2C driver and activate EEPROM support to have a slave device for testing. Also activate i2c-dev, so i2c-tools will work. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-18ARM: shmobile: Remove Lager DT reference legacy clock bitsMagnus Damm1-4/+0
Lager DT reference is these days built for multiplatform only which means that CCF comes with the package. Remove unused legacy code ifdefs to clean up the code. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-18ARM: shmobile: Remove Koelsch DT reference legacy clock bitsMagnus Damm1-4/+1
Koelsch DT reference is these days built for multiplatform only which means that CCF comes with the package. Remove unused legacy code ifdefs to clean up the code. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-18ARM: shmobile: Remove KZM9D board codeMagnus Damm3-54/+0
Get rid of KZM9D board code written in C. This version of the C board code was used in the case of multiplatform, but these days DT can be used instead, so because of that simply get rid of the C code to simplify and save space. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: mvebu: update defconfigs for Armada 375 and 38xThomas Petazzoni2-0/+4
This commit enables the Armada 375 and Armada 38x support in mvebu_defconfig and multi_v7_defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-17ARM: dove: Enable watchdog support in the defconfigEzequiel Garcia1-0/+2
Now that we have watchdog support, let's add it to the defconfig. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-17ARM: mvebu: Enable watchdog support in defconfigEzequiel Garcia2-0/+4
Now that we have proper support for Armada 370/XP watchdog let's enable it in mvebu_defconfig and multi_v7_defconfig. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-17ARM: config: keystone: enable led supportGrygorii Strashko1-0/+8
The Keystone GPIO functionality is ready for use, so LED support can be enabled in config. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-02-17ARM: config: keystone: enable gpio supportGrygorii Strashko1-0/+3
Enable enable GPIO support for Keystone by setting CONFIG_GPIOLIB and CONFIG_GPIO_DAVINCI options in keystone_defconfig. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-02-17ARM: config: keystone: enable watchdog supportIvan Khoronzhuk1-0/+2
Keystone SoC uses the same watchdog driver as Davinci, so enable WDT and core used by it. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-02-17ARM: shmobile: koelsch: Enable SDHI, GPIO and regulators in defconfigSimon Horman1-0/+9
Enable the following: * regulators (needed for SDHI) * SDHI * GPIO * GPIO keys * GPIO LEDs Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: Get rid of legacy KZM9D defconfigMagnus Damm1-91/+0
Get rid of the kzm9d_defconfig. The KZM9D is now supported as DT only in case of EMEV2 is selected in the kernel configuration. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: Genmai: set proper DMA masks for Ether deviceSergei Shtylyov1-5/+14
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: Koelsch: set proper DMA masks for Ether deviceSergei Shtylyov1-5/+14
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Currently, the code works without DMA masks but as we would have to enable CONFIG_HIGHMEM to access the full board memory in the future, when support for NETIF_F_SG would be added to the 'sh_eth' driver as well, the correct DMA masks should start to matter... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: Lager: set proper DMA masks for Ether deviceSergei Shtylyov1-5/+14
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Currently, the code works without DMA masks but as we would have to enable CONFIG_HIGHMEM to access the full board memory in the future, when support for NETIF_F_SG would be added to the 'sh_eth' driver as well, the correct DMA masks should start to matter... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: BOCK-W: set proper DMA masks for Ether deviceSergei Shtylyov1-7/+14
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: Armadillo 800 EVA: set proper DMA masks for Ether deviceSergei Shtylyov1-0/+2
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: koelsch-reference: Add DU deviceLaurent Pinchart1-0/+59
The DU device has no DT bindings yet, instantiate it as a platform device for now. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: omitted DTS portion] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: koelsch-reference: Refactor clock lookup hackLaurent Pinchart1-15/+27
Make the clock lookup hack more generic to ease the addition of more devices. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: lager-reference: Add DU deviceLaurent Pinchart1-0/+66
The DU device has no DT bindings yet, instantiate it as a platform device for now. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: omitted DTS portion] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: lager-reference: Refactor clock lookup hackLaurent Pinchart1-15/+22
Make the clock lookup hack more generic to ease the addition of more devices. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: lager: Add internal USB PCI supportValentine Barshak1-0/+50
This adds internal PCI USB host devices to R-Car H2 Lager board. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> [damm@opensource.se: Rebased and reworked to only include USB1 and USB2] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: mvebu: enable audio options in mvebu_defconfigThomas Petazzoni1-0/+5
Since at least the Armada 370 SoC has audio support, it makes sense to enable the corresponding kernel configuration options in mvebu_defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>