aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/syscall-counts.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-07-20ima: Support additional conditionals in the KEXEC_CMDLINE hook functionTyler Hicks9-25/+31
Take the properties of the kexec kernel's inode and the current task ownership into consideration when matching a KEXEC_CMDLINE operation to the rules in the IMA policy. This allows for some uniformity when writing IMA policy rules for KEXEC_KERNEL_CHECK, KEXEC_INITRAMFS_CHECK, and KEXEC_CMDLINE operations. Prior to this patch, it was not possible to write a set of rules like this: dont_measure func=KEXEC_KERNEL_CHECK obj_type=foo_t dont_measure func=KEXEC_INITRAMFS_CHECK obj_type=foo_t dont_measure func=KEXEC_CMDLINE obj_type=foo_t measure func=KEXEC_KERNEL_CHECK measure func=KEXEC_INITRAMFS_CHECK measure func=KEXEC_CMDLINE The inode information associated with the kernel being loaded by a kexec_kernel_load(2) syscall can now be included in the decision to measure or not Additonally, the uid, euid, and subj_* conditionals can also now be used in KEXEC_CMDLINE rules. There was no technical reason as to why those conditionals weren't being considered previously other than ima_match_rules() didn't have a valid inode to use so it immediately bailed out for KEXEC_CMDLINE operations rather than going through the full list of conditional comparisons. Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: kexec@lists.infradead.org Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-20ima: Use the common function to detect LSM conditionals in a ruleTyler Hicks1-9/+2
Make broader use of ima_rule_contains_lsm_cond() to check if a given rule contains an LSM conditional. This is a code cleanup and has no user-facing change. Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-20ima: Move comprehensive rule validation checks out of the token parserTyler Hicks3-46/+37
Use ima_validate_rule(), at the end of the token parsing stage, to verify combinations of actions, hooks, and flags. This is useful to increase readability by consolidating such checks into a single function and also because rule conditionals can be specified in arbitrary order making it difficult to do comprehensive rule validation until the entire rule has been parsed. This allows for the check that ties together the "keyrings" conditional with the KEY_CHECK function hook to be moved into the final rule validation. The modsig check no longer needs to compiled conditionally because the token parser will ensure that modsig support is enabled before accepting "imasig|modsig" appraise type values. The final rule validation will ensure that appraise_type and appraise_flag options are only present in appraise rules. Finally, this allows for the check that ties together the "pcr" conditional with the measure action to be moved into the final rule validation. Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-20ima: Use correct type for the args_p member of ima_rule_entry.lsm elementsTyler Hicks1-9/+9
Make args_p be of the char pointer type rather than have it be a void pointer that gets casted to char pointer when it is used. It is a simple NUL-terminated string as returned by match_strdup(). Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-20ima: Shallow copy the args_p member of ima_rule_entry.lsm elementsTyler Hicks1-10/+8
The args_p member is a simple string that is allocated by ima_rule_init(). Shallow copy it like other non-LSM references in ima_rule_entry structs. There are no longer any necessary error path cleanups to do in ima_lsm_copy_rule(). Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-20ima: Fail rule parsing when appraise_flag=blacklist is unsupportableTyler Hicks1-1/+14
Verifying that a file hash is not blacklisted is currently only supported for files with appended signatures (modsig). In the future, this might change. For now, the "appraise_flag" option is only appropriate for appraise actions and its "blacklist" value is only appropriate when CONFIG_IMA_APPRAISE_MODSIG is enabled and "appraise_flag=blacklist" is only appropriate when "appraise_type=imasig|modsig" is also present. Make this clear at policy load so that IMA policy authors don't assume that other uses of "appraise_flag=blacklist" are supported. Fixes: 273df864cf74 ("ima: Check against blacklisted hashes for files with modsig") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reivewed-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-16ima: Fail rule parsing when the KEY_CHECK hook is combined with an invalid condTyler Hicks1-0/+7
The KEY_CHECK function only supports the uid, pcr, and keyrings conditionals. Make this clear at policy load so that IMA policy authors don't assume that other conditionals are supported. Fixes: 5808611cccb2 ("IMA: Add KEY_CHECK func to measure keys") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-16ima: Fail rule parsing when the KEXEC_CMDLINE hook is combined with an invalid condTyler Hicks1-0/+21
The KEXEC_CMDLINE hook function only supports the pcr conditional. Make this clear at policy load so that IMA policy authors don't assume that other conditionals are supported. Since KEXEC_CMDLINE's inception, ima_match_rules() has always returned true on any loaded KEXEC_CMDLINE rule without any consideration for other conditionals present in the rule. Make it clear that pcr is the only supported KEXEC_CMDLINE conditional by returning an error during policy load. An example of why this is a problem can be explained with the following rule: dont_measure func=KEXEC_CMDLINE obj_type=foo_t An IMA policy author would have assumed that rule is valid because the parser accepted it but the result was that measurements for all KEXEC_CMDLINE operations would be disabled. Fixes: b0935123a183 ("IMA: Define a new hook to measure the kexec boot command line arguments") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-16ima: Fail rule parsing when buffer hook functions have an invalid actionTyler Hicks1-2/+38
Buffer based hook functions, such as KEXEC_CMDLINE and KEY_CHECK, can only measure. The process_buffer_measurement() function quietly ignores all actions except measure so make this behavior clear at the time of policy load. The parsing of the keyrings conditional had a check to ensure that it was only specified with measure actions but the check should be on the hook function and not the keyrings conditional since "appraise func=KEY_CHECK" is not a valid rule. Fixes: b0935123a183 ("IMA: Define a new hook to measure the kexec boot command line arguments") Fixes: 5808611cccb2 ("IMA: Add KEY_CHECK func to measure keys") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-16ima: Free the entire rule if it fails to parseTyler Hicks1-1/+2
Use ima_free_rule() to fix memory leaks of allocated ima_rule_entry members, such as .fsname and .keyrings, when an error is encountered during rule parsing. Set the args_p pointer to NULL after freeing it in the error path of ima_lsm_rule_init() so that it isn't freed twice. This fixes a memory leak seen when loading an rule that contains an additional piece of allocated memory, such as an fsname, followed by an invalid conditional: # echo "measure fsname=tmpfs bad=cond" > /sys/kernel/security/ima/policy -bash: echo: write error: Invalid argument # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff98e7e4ece6c0 (size 8): comm "bash", pid 672, jiffies 4294791843 (age 21.855s) hex dump (first 8 bytes): 74 6d 70 66 73 00 6b a5 tmpfs.k. backtrace: [<00000000abab7413>] kstrdup+0x2e/0x60 [<00000000f11ede32>] ima_parse_add_rule+0x7d4/0x1020 [<00000000f883dd7a>] ima_write_policy+0xab/0x1d0 [<00000000b17cf753>] vfs_write+0xde/0x1d0 [<00000000b8ddfdea>] ksys_write+0x68/0xe0 [<00000000b8e21e87>] do_syscall_64+0x56/0xa0 [<0000000089ea7b98>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: f1b08bbcbdaf ("ima: define a new policy condition based on the filesystem name") Fixes: 2b60c0ecedf8 ("IMA: Read keyrings= option from the IMA policy") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-16ima: Free the entire rule when deleting a list of rulesTyler Hicks1-5/+24
Create a function, ima_free_rule(), to free all memory associated with an ima_rule_entry. Use the new function to fix memory leaks of allocated ima_rule_entry members, such as .fsname and .keyrings, when deleting a list of rules. Make the existing ima_lsm_free_rule() function specific to the LSM audit rule array of an ima_rule_entry and require that callers make an additional call to kfree to free the ima_rule_entry itself. This fixes a memory leak seen when loading by a valid rule that contains an additional piece of allocated memory, such as an fsname, followed by an invalid rule that triggers a policy load failure: # echo -e "dont_measure fsname=securityfs\nbad syntax" > \ /sys/kernel/security/ima/policy -bash: echo: write error: Invalid argument # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff9bab67ca12c0 (size 16): comm "bash", pid 684, jiffies 4295212803 (age 252.344s) hex dump (first 16 bytes): 73 65 63 75 72 69 74 79 66 73 00 6b 6b 6b 6b a5 securityfs.kkkk. backtrace: [<00000000adc80b1b>] kstrdup+0x2e/0x60 [<00000000d504cb0d>] ima_parse_add_rule+0x7d4/0x1020 [<00000000444825ac>] ima_write_policy+0xab/0x1d0 [<000000002b7f0d6c>] vfs_write+0xde/0x1d0 [<0000000096feedcf>] ksys_write+0x68/0xe0 [<0000000052b544a2>] do_syscall_64+0x56/0xa0 [<000000007ead1ba7>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: f1b08bbcbdaf ("ima: define a new policy condition based on the filesystem name") Fixes: 2b60c0ecedf8 ("IMA: Read keyrings= option from the IMA policy") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-16ima: Have the LSM free its audit ruleTyler Hicks2-1/+6
Ask the LSM to free its audit rule rather than directly calling kfree(). Both AppArmor and SELinux do additional work in their audit_rule_free() hooks. Fix memory leaks by allowing the LSMs to perform necessary work. Fixes: b16942455193 ("ima: use the lsm policy update notifier") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Janne Karhunen <janne.karhunen@gmail.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-16IMA: Add audit log for failure conditionsLakshmi Ramasubramanian4-22/+51
process_buffer_measurement() and ima_alloc_key_entry() functions need to log an audit message for auditing integrity measurement failures. Add audit message in these two functions. Remove "pr_devel" log message in process_buffer_measurement(). Sample audit messages: [ 6.303048] audit: type=1804 audit(1592506281.627:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel op=measuring_key cause=ENOMEM comm="swapper/0" name=".builtin_trusted_keys" res=0 errno=-12 [ 8.019432] audit: type=1804 audit(1592506283.344:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 op=measuring_kexec_cmdline cause=hashing_error comm="systemd" name="kexec-cmdline" res=0 errno=-22 Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-07-16integrity: Add errno field in audit messageLakshmi Ramasubramanian2-1/+23
Error code is not included in the audit messages logged by the integrity subsystem. Define a new function integrity_audit_message() that takes error code in the "errno" parameter. Add "errno" field in the audit messages logged by the integrity subsystem and set the value passed in the "errno" parameter. [ 6.303048] audit: type=1804 audit(1592506281.627:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel op=measuring_key cause=ENOMEM comm="swapper/0" name=".builtin_trusted_keys" res=0 errno=-12 [ 7.987647] audit: type=1802 audit(1592506283.312:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 op=policy_update cause=completed comm="systemd" res=1 errno=0 [ 8.019432] audit: type=1804 audit(1592506283.344:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 op=measuring_kexec_cmdline cause=hashing_error comm="systemd" name="kexec-cmdline" res=0 errno=-22 Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Steve Grubb <sgrubb@redhat.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-06-24ima: extend boot_aggregate with kernel measurementsMaurizio Drocco2-2/+15
Registers 8-9 are used to store measurements of the kernel and its command line (e.g., grub2 bootloader with tpm module enabled). IMA should include them in the boot aggregate. Registers 8-9 should be only included in non-SHA1 digests to avoid ambiguity. Signed-off-by: Maurizio Drocco <maurizio.drocco@ibm.com> Reviewed-by: Bruno Meneguele <bmeneg@redhat.com> Tested-by: Bruno Meneguele <bmeneg@redhat.com> (TPM 1.2, TPM 2.0) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-06-21Linux 5.8-rc2Linus Torvalds1-1/+1
2020-06-22samples: watch_queue: build sample program for target architectureMasahiro Yamada2-7/+5
This userspace program includes UAPI headers exported to usr/include/. 'make headers' always works for the target architecture (i.e. the same architecture as the kernel), so the sample program should be built for the target as well. Kbuild now supports 'userprogs' for that. I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because $(CC) may not provide libc. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-22Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"Masahiro Yamada1-11/+3
This reverts commit e0b250b57dcf403529081e5898a9de717f96b76b, which broke build systems that need to install files to a certain path, but do not set INSTALL_MOD_PATH when invoking 'make install'. $ make INSTALL_PATH=/tmp/destdir install mkdir: cannot create directory ‘/lib/modules/5.8.0-rc1+/’: Permission denied Makefile:1342: recipe for target '_builtin_inst_' failed make: *** [_builtin_inst_] Error 1 While modules.builtin is useful also for CONFIG_MODULES=n, this change in the behavior is quite unexpected. Maybe "make modules_install" can install modules.builtin irrespective of CONFIG_MODULES as Jonas originally suggested. Anyway, that commit should be reverted ASAP. Reported-by: Douglas Anderson <dianders@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net>
2020-06-20pinctrl: single: fix function name in documentationDrew Fustini1-1/+1
Use the correct the function name in the documentation for "pcs_parse_one_pinctrl_entry()". "smux_parse_one_pinctrl_entry()" appears to be an artifact from the development of a prior patch series ("simple pinmux driver") which transformed into pinctrl-single. Signed-off-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20pinctrl: qcom: ipq6018 Add missing pins in qpic pin groupSivaprakash Murugesan1-1/+2
The patch adds missing qpic data pins to qpic pingroup. These pins are necessary for the qpic nand to work. Fixes: ef1ea54eab0e ("pinctrl: qcom: Add ipq6018 pinctrl driver") Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'"Haibo Chen1-4/+3
This reverts commit ba403242615c2c99e27af7984b1650771a2cc2c9. After commit 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support"). i.MX7D has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings. If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call devm_request_mem_region() for the region <0x30330000-0x3033ffff> for the first time. Then, next time when probe the iomuxc, API devm_platform_ioremap_resource() will also use the API devm_request_mem_region() for the share region <0x30330000-0x3033ffff> again, then cause issue, log like below: [ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver [ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff] [ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16 Fixes: ba403242615c ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20afs: Fix hang on rmmod due to outstanding timerDavid Howells4-2/+16
The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-20afs: Fix afs_do_lookup() to call correct fetch-status op variantDavid Howells1-1/+1
Fix afs_do_lookup()'s fallback case for when FS.InlineBulkStatus isn't supported by the server. In the fallback, it calls FS.FetchStatus for the specific vnode it's meant to be looking up. Commit b6489a49f7b7 broke this by renaming one of the two identically-named afs_fetch_status_operation descriptors to something else so that one of them could be made non-static. The site that used the renamed one, however, wasn't renamed and didn't produce any warning because the other was declared in a header. Fix this by making afs_do_lookup() use the renamed variant. Note that there are two variants of the success method because one is called from ->lookup() where we may or may not have an inode, but can't call iget until after we've talked to the server - whereas the other is called from within iget where we have an inode, but it may or may not be initialised. The latter variant expects there to be an inode, but because it's being called from there former case, there might not be - resulting in an oops like the following: BUG: kernel NULL pointer dereference, address: 00000000000000b0 ... RIP: 0010:afs_fetch_status_success+0x27/0x7e ... Call Trace: afs_wait_for_operation+0xda/0x234 afs_do_lookup+0x2fe/0x3c1 afs_lookup+0x3c5/0x4bd __lookup_slow+0xcd/0x10f walk_component+0xa2/0x10c path_lookupat.isra.0+0x80/0x110 filename_lookup+0x81/0x104 vfs_statx+0x76/0x109 __do_sys_newlstat+0x39/0x6b do_syscall_64+0x4c/0x78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: b6489a49f7b7 ("afs: Fix silly rename") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-20powerpc/8xx: Provide ptep_get() with 16k pagesChristophe Leroy1-0/+10
READ_ONCE() now enforces atomic read, which leads to: CC mm/gup.o In file included from ./include/linux/kernel.h:11:0, from mm/gup.c:2: In function 'gup_hugepte.constprop', inlined from 'gup_huge_pd.isra.79' at mm/gup.c:2465:8: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_222' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE(). _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ ./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert' compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \ ^ ./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type' compiletime_assert_rwonce_type(x); \ ^ mm/gup.c:2428:8: note: in expansion of macro 'READ_ONCE' pte = READ_ONCE(*ptep); ^ In function 'gup_get_pte', inlined from 'gup_pte_range' at mm/gup.c:2228:9, inlined from 'gup_pmd_range' at mm/gup.c:2613:15, inlined from 'gup_pud_range' at mm/gup.c:2641:15, inlined from 'gup_p4d_range' at mm/gup.c:2666:15, inlined from 'gup_pgd_range' at mm/gup.c:2694:15, inlined from 'internal_get_user_pages_fast' at mm/gup.c:2795:3: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_219' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE(). _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ ./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert' compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \ ^ ./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type' compiletime_assert_rwonce_type(x); \ ^ mm/gup.c:2199:9: note: in expansion of macro 'READ_ONCE' return READ_ONCE(*ptep); ^ make[2]: *** [mm/gup.o] Error 1 Define ptep_get() on 8xx when using 16k pages. Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/341688399c1b102756046d19ea6ce39db1ae4742.1592225558.git.christophe.leroy@csgroup.eu
2020-06-20mm: Allow arches to provide ptep_get()Christophe Leroy3-2/+9
Since commit 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") it is not possible anymore to use READ_ONCE() to access complex page table entries like the one defined for powerpc 8xx with 16k size pages. Define a ptep_get() helper that architectures can override instead of performing a READ_ONCE() on the page table entry pointer. Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/087fa12b6e920e32315136b998aa834f99242695.1592225558.git.christophe.leroy@csgroup.eu
2020-06-20mm/gup: Use huge_ptep_get() in gup_hugepte()Christophe Leroy1-1/+1
gup_hugepte() reads hugepage table entries, it can't read them directly, huge_ptep_get() must be used. Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ffc3714334c3bfaca6f13788ad039e8759ae413f.1592225558.git.christophe.leroy@csgroup.eu
2020-06-19MAINTAINERS: Add robert and myself as qcom i2c cci maintainersLoic Poulain1-0/+9
Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> [wsa: kept sorting] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19i2c: smbus: Fix spelling mistake in the commentsKeyur Patel1-1/+1
Fix spelling mistake in the comments with help of `codespell`. seperate ==> separate Signed-off-by: Keyur Patel <iamkeyur96@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19Documentation/i2c: SMBus start signal is S not ADaniel Schaefer1-1/+1
Just like all other I2C/SMBus commands, the start signal for the SMBus Quick Command is S, not A. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniel Schaefer <git@danielschaefer.me> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19i2c: remove deprecated i2c_new_device APIWolfram Sang2-30/+3
All in-tree users have been converted to the new i2c_new_client_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19Documentation: media: convert to use i2c_new_client_device()Wolfram Sang2-2/+2
Move away from the deprecated API and advertise the new one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19video: backlight: tosa_lcd: convert to use i2c_new_client_device()Wolfram Sang1-2/+2
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19x86/platform/intel-mid: convert to use i2c_new_client_device()Wolfram Sang1-2/+2
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19drm: encoder_slave: use new I2C APIWolfram Sang1-8/+2
i2c_new_client() is deprecated, use the replacement i2c_new_client_device(). Also, we have a helper to check if a driver is bound. Use it to simplify the code. Note that this changes the errno for a failed device creation from ENOMEM to ENODEV. No callers currently interpret this errno, though, so we use this condensed error check. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19drm: encoder_slave: fix refcouting error for modulesWolfram Sang1-2/+3
module_put() balances try_module_get(), not request_module(). Fix the error path to match that. Fixes: 2066facca4c7 ("drm/kms: slave encoder interface.") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-18RISC-V: Acquire mmap lock before invoking walk_page_rangeAtish Patra1-2/+12
As per walk_page_range documentation, mmap lock should be acquired by the caller before invoking walk_page_range. mmap_assert_locked gets triggered without that. The details can be found here. http://lists.infradead.org/pipermail/linux-riscv/2020-June/010335.html Fixes: 395a21ff859c(riscv: add ARCH_HAS_SET_DIRECT_MAP support) Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Michel Lespinasse <walken@google.com> Reviewed-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-06-18RISC-V: Don't allow write+exec only page mapping request in mmapYash Shah1-0/+6
As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the RISC-V instruction set manual[0], the PTE permission bit combination of "write+exec only" is reserved for future use. Hence, don't allow such mapping request in mmap call. An issue is been reported by David Abdurachmanov, that while running stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V specific kernel. This issue arises when the stress-sysbadaddr request for pages with "write+exec only" permission bits and then passes the address obtain from this mmap call to various system call. For the riscv kernel, the mmap call should fail for this particular combination of permission bits since it's not valid. [0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdf Signed-off-by: Yash Shah <yash.shah@sifive.com> Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com> [Palmer: Refer to the latest ISA specification at the only link I could find, and update the terminology.] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-06-18maccess: make get_kernel_nofault() check for minimal type compatibilityLinus Torvalds7-9/+11
Now that we've renamed probe_kernel_address() to get_kernel_nofault() and made it look and behave more in line with get_user(), some of the subtle type behavior differences end up being more obvious and possibly dangerous. When you do get_user(val, user_ptr); the type of the access comes from the "user_ptr" part, and the above basically acts as val = *user_ptr; by design (except, of course, for the fact that the actual dereference is done with a user access). Note how in the above case, the type of the end result comes from the pointer argument, and then the value is cast to the type of 'val' as part of the assignment. So the type of the pointer is ultimately the more important type both for the access itself. But 'get_kernel_nofault()' may now _look_ similar, but it behaves very differently. When you do get_kernel_nofault(val, kernel_ptr); it behaves like val = *(typeof(val) *)kernel_ptr; except, of course, for the fact that the actual dereference is done with exception handling so that a faulting access is suppressed and returned as the error code. But note how different the casting behavior of the two superficially similar accesses are: one does the actual access in the size of the type the pointer points to, while the other does the access in the size of the target, and ignores the pointer type entirely. Actually changing get_kernel_nofault() to act like get_user() is almost certainly the right thing to do eventually, but in the meantime this patch adds logit to at least verify that the pointer type is compatible with the type of the result. In many cases, this involves just casting the pointer to 'void *' to make it obvious that the type of the pointer is not the important part. It's not how 'get_user()' acts, but at least the behavioral difference is now obvious and explicit. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-18maccess: rename probe_kernel_address to get_kernel_nofaultChristoph Hellwig20-40/+40
Better describe what this helper does, and match the naming of copy_from_kernel_nofault. Also switch the argument order around, so that it acts and looks like get_user(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-18sparse: use identifiers to define address spacesLuc Van Oostenryck1-4/+4
Currently, address spaces in warnings are displayed as '<asn:X>' with 'X' being the address space's arbitrary number. But since sparse v0.6.0-rc1 (late December 2018), sparse allows you to define the address spaces using an identifier instead of a number. This identifier is then directly used in the warnings. So, use the identifiers '__user', '__iomem', '__percpu' & '__rcu' for the corresponding address spaces. The default address space, __kernel, being not displayed in warnings, stays defined as '0'. With this change, warnings that used to be displayed as: cast removes address space '<asn:1>' of expression ... void [noderef] <asn:2> * will now be displayed as: cast removes address space '__user' of expression ... void [noderef] __iomem * This also moves the __kernel annotation to be the first one, since it is quite different from the others because it's the default one, and so: - it's never displayed - it's normally not needed, nor in type annotations, nor in cast between address spaces. The only time it's needed is when it's combined with a typeof to express "the same type as this one but without the address space" - it can't be defined with a name, '0' must be used. So, it seemed strange to me to have it in the middle of the other ones. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-18block: make function 'kill_bdev' staticZheng Bin2-5/+2
kill_bdev does not have any external user, so make it static. Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-18loop: replace kill_bdev with invalidate_bdevZheng Bin1-4/+4
When a filesystem is mounted on a loop device and on a loop ioctl LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting destroyed. kill_bdev truncate_inode_pages truncate_inode_pages_range do_invalidatepage block_invalidatepage discard_buffer -->clear BH_Mapped flag sb_bread __bread_gfp bh = __getblk_gfp -->discard_buffer clear BH_Mapped flag __bread_slow submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON Fixes: 5db470e229e2 ("loop: drop caches if offset or block_size are changed") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-18libata: Use per port sync for detachKai-Heng Feng2-6/+8
Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: John Garry <john.garry@huawei.com> BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-18partitions/ldm: Replace uuid_copy() with import_uuid() where it makes senseAndy Shevchenko1-1/+1
There is a specific API to treat raw data as UUID, i.e. import_uuid(). Use it instead of uuid_copy() with explicit casting. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-18io_uring: fix possible race condition against REQ_F_NEED_CLEANUPXiaoguang Wang1-4/+4
In io_read() or io_write(), when io request is submitted successfully, it'll go through the below sequence: kfree(iovec); req->flags &= ~REQ_F_NEED_CLEANUP; return ret; But clearing REQ_F_NEED_CLEANUP might be unsafe. The io request may already have been completed, and then io_complete_rw_iopoll() and io_complete_rw() will be called, both of which will also modify req->flags if needed. This causes a race condition, with concurrent non-atomic modification of req->flags. To eliminate this race, in io_read() or io_write(), if io request is submitted successfully, we don't remove REQ_F_NEED_CLEANUP flag. If REQ_F_NEED_CLEANUP is set, we'll leave __io_req_aux_free() to the iovec cleanup work correspondingly. Cc: stable@vger.kernel.org Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-18perf build: Fix error message when asking for -fsanitize=address without required librariesTiezhu Yang1-0/+12
When build perf with ASan or UBSan, if libasan or libubsan can not find, the feature-glibc is 0 and there exists the following error log which is wrong, because we can find gnu/libc-version.h in /usr/include, glibc-devel is also installed. [yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' BUILD: Doing 'make -j4' parallel build HOSTCC fixdep.o HOSTLD fixdep-in.o LINK fixdep <stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target <stdin>:1:0: warning: -fsanitize=address not supported for this target Auto-detecting system features: ... dwarf: [ OFF ] ... dwarf_getlocations: [ OFF ] ... glibc: [ OFF ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libcap: [ OFF ] ... libelf: [ OFF ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... zlib: [ OFF ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ OFF ] ... libaio: [ OFF ] ... libzstd: [ OFF ] ... disassembler-four-args: [ OFF ] Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop. Makefile.perf:224: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 [yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h /usr/include/gnu/libc-version.h After install libasan and libubsan, the feature-glibc is 1 and the build process is success, so the cause is related with libasan or libubsan, we should check them and print an error log to reflect the reality. Committer testing: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ OFF ] ... dwarf_getlocations: [ OFF ] ... glibc: [ OFF ] ... gtk2: [ OFF ] ... libbfd: [ OFF ] ... libcap: [ OFF ] ... libelf: [ OFF ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... zlib: [ OFF ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ OFF ] ... libaio: [ OFF ] ... libzstd: [ OFF ] ... disassembler-four-args: [ OFF ] Makefile.config:401: *** No libasan found, please install libasan. Stop. make[1]: *** [Makefile.perf:231: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/acme/git/perf/tools/perf' $ $ $ sudo dnf install libasan <SNIP> Installed: libasan-9.3.1-2.fc31.x86_64 $ $ $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] <SNIP> CC /tmp/build/perf/util/pmu-flex.o FLEX /tmp/build/perf/util/expr-flex.c CC /tmp/build/perf/util/expr-bison.o CC /tmp/build/perf/util/expr.o CC /tmp/build/perf/util/expr-flex.o CC /tmp/build/perf/util/parse-events-flex.o CC /tmp/build/perf/util/parse-events.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> INSTALL python-scripts INSTALL perf_completion-script INSTALL perf-tip make: Leaving directory '/home/acme/git/perf/tools/perf' $ ldd ~/bin/perf | grep asan libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000) $ And if we rebuild without -fsanitize-address: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ make O=/tmp/build/perf -C tools/perf/ install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] GEN /tmp/build/perf/common-cmds.h CC /tmp/build/perf/exec-cmd.o <SNIP> INSTALL perf_completion-script INSTALL perf-tip make: Leaving directory '/home/acme/git/perf/tools/perf' $ ldd ~/bin/perf | grep asan $ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: tiezhu yang <yangtiezhu@loongson.cn> Cc: xuefeng li <lixuefeng@loongson.cn> Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-18tools lib traceevent: Add handler for __builtin_expect()Steven Rostedt (VMware)1-0/+35
In order to move pointer checks like IS_ERR_VALUE() out of the hotpath and into the reader path of a trace event, user space tools need to be able to parse that. IS_ERR_VALUE() is defined as: #define IS_ERR_VALUE() unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO) Which eventually turns into: __builtin_expect(!!((unsigned long)(void *)(x) >= (unsigned long)-4095), 0) Now the traceevent parser can handle most of that except for the __builtin_expect(), which needs to be added. Link: https://lore.kernel.org/linux-mm/20200320055823.27089-3-jaewon31.kim@samsung.com/ Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kees Kook <keescook@chromium.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-mm@kvack.org Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200324200956.821799393@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-18tools lib traceevent: Handle __attribute__((user)) in field namesSteven Rostedt (VMware)1-1/+38
Commit c61f13eaa1ee1 ("gcc-plugins: Add structleak for more stack initialization") added "__attribute__((user))" to the user when stackleak detector is enabled. This now appears in the field format of system call trace events for system calls that have user buffers. The "__attribute__((user))" breaks the parsing in libtraceevent. That needs to be handled. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kees Kook <keescook@chromium.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-mm@kvack.org Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200324200956.663647256@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-18tools lib traceevent: Add append() function helper for appending stringsSteven Rostedt (VMware)1-58/+40
There's several locations that open code realloc and strcat() to append text to strings. Add an append() function that takes a delimiter and a string to append to another string. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jaewon Lim <jaewon31.kim@samsung.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kees Kook <keescook@chromium.org> Cc: linux-mm@kvack.org Cc: linux-trace-devel@vger.kernel.org Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lore.kernel.org/lkml/20200324200956.515118403@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-18arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpointsWill Deacon1-18/+26
Unprivileged memory accesses generated by the so-called "translated" instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire unexpectedly if kernel debugging is enabled. In such cases, the hw_breakpoint logic will invoke the user overflow handler which will typically raise a SIGTRAP back to the current task. This is futile when returning back to the kernel because (a) the signal won't have been delivered and (b) userspace can't handle the thing anyway. Avoid invoking the user overflow handler for watchpoints triggered by kernel uaccess routines, and instead single-step over the faulting instruction as we would if no overflow handler had been installed. (Fixes tag identifies the introduction of unprivileged memory accesses, which exposed this latent bug in the hw_breakpoint code) Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Fixes: 57f4959bad0a ("arm64: kernel: Add support for User Access Override") Reported-by: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.