aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/util/parse-events.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-10-16perf tool: Precise mode requires exclude_guestDavid Ahern1-0/+3
Summary of events per Peter: "Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. AMB IBS does work but doesn't currently support exclude_* at all, setting an exclude_* bit will make it fail." This patch handles userspace perf command, setting the exclude_guest attribute if precise mode is requested, but only if a user has not specified a request for guest or host only profiling (G or H attribute). Kernel side AMD currently ignores all exclude_* bits, so there is no impact to existing IBS code paths. Robert Richter has a patch where IBS code will return EINVAL if an exclude_* bit is set. When this goes in it means use of :p on AMD with IBS will first fail with EINVAL (because exclude_guest will be set). Then the existing fallback code within perf will unset exclude_guest and try again. The second attempt will succeed if the CPU supports IBS profiling. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Robert Richter <robert.richter@amd.com> Tested-by: Robert Richter <robert.richter@amd.com> Reviewed-by: Robert Richter <robert.richter@amd.com> Cc: Avi Kivity <avi@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/1347569955-54626-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-26perf tools: Use perf_evsel__newtp in the event parserArnaldo Carvalho de Melo1-30/+16
Elliminating code duplication. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-9v4zl7ldlp8v6azrpsu5lupk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-17perf stat: Check PMU cpumask fileYan, Zheng1-4/+14
If user doesn't explicitly specify CPU list, perf-stat only collects events on CPUs listed in the PMU cpumask file. Signed-off-by: "Yah, Zheng" <zheng.z.yan@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1347263631-23175-3-git-send-email-zheng.z.yan@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: Use __maybe_used for unused variablesIrina Tirdea1-3/+4
perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-06perf tools: Fix cache event name generationJiri Olsa1-1/+1
If the event name is specified with all 3 components, the last one overwrites the previous one during the name composing within the parse_events_add_cache function. Fixing this by properly adjusting the string index. Reported-by: Joel Uckelman <joel@lightboxtechnologies.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joel Uckelman <joel@lightboxtechnologies.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LPU-Reference: 20120905175133.GA18352@krava.brq.redhat.com [ committer note: Remove the newline fix, done already in 42e1fb7 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-06perf tools: Remove extraneous newline when parsing hardware cache eventsArnaldo Carvalho de Melo1-1/+1
Noticed while developing a 'perf test' entry to verify that perf_evsel__name works. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-xz6zgh38mp3cjnd2udh38z8f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-22perf tools: Catch event names from command lineRobert Richter1-0/+12
Use command line string provided by the -e option to name events. This way we get unique events names that also support pmu event syntax (<pmu_name>/<config>/<modifier>). No need to reconstruct the name anymore from its attributes. We use the event_desc of the header to store the name in the perf.data header. Thus it is also available for perf report. Implemented by putting the parser in different states to parse events or configs. And since event names are now generated from the command line specification. Update event names in test cases accordingly. Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1345144224-27280-6-git-send-email-robert.richter@amd.com [ committer note: Folded patch fixing 'perf test' failure reported by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-15perf evlist: Introduce evsel list accessorsArnaldo Carvalho de Melo1-1/+1
To replace the longer list_entry constructs for things that are widely used: perf_evlist__{first,last}(evlist) perf_evsel__next(evsel) Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ng7azq26wg1jd801qqpcozwp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-15perf evlist: Rename __group method to __set_leaderArnaldo Carvalho de Melo1-16/+3
Just like was done for parse_events__set_leader. Also we need to have the list_entry set_leader method in evlist.c so that we don't grow another dep in the python binding: # ~acme/git/linux/tools/perf/python/twatch.py Traceback (most recent call last): File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module> import perf ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: parse_events__set_leader And also remove a pr_debug from evsel.c so that we avoid this one too: # ~acme/git/linux/tools/perf/python/twatch.py Traceback (most recent call last): File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module> import perf ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: eprintf Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-0hk9dazg9pora9jylkqngovm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-14perf tools: Enable grouping logic for parsed eventsJiri Olsa1-4/+22
This patch adds a functionality that allows to create event groups based on the way they are specified on the command line. Adding functionality to the '{}' group syntax introduced in earlier patch. The current '--group/-g' option behaviour remains intact. If you specify it for record/stat/top command, all the specified events become members of a single group with the first event as a group leader. With the new '{}' group syntax you can create group like: # perf record -e '{cycles,faults}' ls resulting in single event group containing 'cycles' and 'faults' events, with cycles event as group leader. All groups are created with regards to threads and cpus. Thus recording an event group within a 2 threads on server with 4 CPUs will create 8 separate groups. Examples (first event in brackets is group leader): # 1 group (cpu-clock,task-clock) perf record --group -e cpu-clock,task-clock ls perf record -e '{cpu-clock,task-clock}' ls # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults) perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls # 1 group (cpu-clock,task-clock,minor-faults,major-faults) perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults) perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \ -e instructions ls # 1 group # (cpu-clock,task-clock,minor-faults,major-faults,instructions) perf record --group -e cpu-clock,task-clock \ -e minor-faults,major-faults -e instructions ls perf record -e '{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls It's possible to use standard event modifier for a group, which spans over all events in the group and updates each event modifier settings, for example: # perf record -r '{faults:k,cache-references}:p' resulting in ':kp' modifier being used for 'faults' and ':p' modifier being used for 'cache-references' event. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-14perf tools: Add support to update event modifierJiri Olsa1-12/+62
Adding support to update already defined event's attribute with event modifier. This change will allow to use group modifier as an update to the existing event modifiers. Adding 'add' parameter to the parse_events__modifier_event function. Calling it with 'add' = false/true, the event modifier is initialized/updated respectively. Added exclude_GH flag to evsel struct, because we need to remember if one of 'GH' modifiers was used for event. The reason is that the default settings for exclude_guest is 1 and during the group modifier processing we have no other way of knowing if it was set by default or by event modifier. Keeping the current behaviour, that any event/group modifier reset the defaults for exclude_host (0) and exclude_guest (1). Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/n/tip-8peaey3e2qc9dwtkvzbi4wmx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-14perf tools: Add support to parse event group syntaxJiri Olsa1-2/+12
Adding scanner/parser bits to parse event groups. The grammar for group is: groups: groups ',' group | group group: group_name '{' events '}' group_mod group_name: name | empty group_mod: ':' group_mods | empty group_mods: event_mod It's possible to use standard event modifier as a modifier for group. It'll be used as an update to existing event modifiers. It's necessary to use quoting ("'\) when specifying group on command line, since {} characters are interpreted by most of the shells. It is now possible to specify groups in event syntax like: '{cycles,faults}' - anonymous group 'group1{cycles,faults} - group with name 'group1' '{cycles,faults}:k - anonymous group with event modifier 'k' '{cpu-clock,task-clock},{minor-faults,major-faults}' - two anonymous groups The grouping functionality itself is coming shortly. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/n/tip-p4j8bnvo879uokum4k4zk5q6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-09perf tools: Support for events bash completionFrederic Weisbecker1-26/+44
Add basic bash completion for the -e option in record, top and stat subcommands. Only hardware, software and tracepoint events are supported. Breakpoints, raw events and events grouping completion need more thinking. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1344522713-27951-3-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08perf tools: Fix parsing of 64 bit raw config value for 32 bitRobert Richter1-3/+3
perf record fails on 32 bit with: invalid or unsupported event: 'r40000F7E0' Fixing this by parsing 64 bit num values. Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1344361396-7237-4-git-send-email-robert.richter@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf tools: Make the breakpoint events sample period default to 1Jovi Zhang1-0/+1
There have one problem about hw_breakpoint perf event, as watched, the events reported to userspace is not correctly, sometime one trigger bp_event report several events, sometime bp_event cannot go through to user. The root cause is attr->freq is 1 passed to kernel defaultly in bp events, this make kernel calculate event period not as expect, make sample period to 1 will change attr->freq to 0, to fix this problem. This patch is similar with commit f92128 about tracepoint events: perf: Make the trace events sample period default to 1 Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/CACV3sbLF8taiCq_VYW-sgRJyupeMzg58C7ZXfMe3xZUiH_Mx6w@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf tools: Fix trace events storms due to weight demuxFrederic Weisbecker1-0/+1
Trace events have a period (weight) of 1 by default. This can be overriden on events definition by using the __perf_count() macro. For example, the sched_stat_runtime() is weighted with the runtime of the task that fired the event. By default, perf handles such weighted event by dividing it into individual events carrying a weight of 1. For example if sched_stat_runtime is fired and the task has run 5000000 nsecs, perf divides it into 5000000 events in the buffer. This behaviour makes weighted events unusable because they quickly fullfill the buffers and we lose most events. The commit 5d81e5cfb37a174e8ddc0413e2e70cdf05807ace ("events: Don't divide events if it has field period") solves this problem by sending only one event when PERF_SAMPLE_PERIOD flag is set. The weight is carried in the sample itself such that we don't need to demultiplex it anymore. This patch provides the last missing piece to use this feature by setting PERF_SAMPLE_PERIOD from perf tools when we deal with trace events. Before: $ ./perf record -e sched:* -a sleep 1 [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.619 MB perf.data (~70749 samples) ] Warning: Processed 16909 events and lost 1 chunks! Check IO/CPU overload! $ ./perf script perf 1894 [003] 824.898327: sched_migrate_task: comm=perf pid=1898 prio=120 orig_cpu=2 dest_cpu=0 perf 1894 [003] 824.898335: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898336: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898337: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898338: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898339: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898340: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898341: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] [...] After: $ ./perf record -e sched:* -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.074 MB perf.data (~3228 samples) ] $ ./perf script perf 1461 [000] 554.286957: sched_migrate_task: comm=perf pid=1465 prio=120 orig_cpu=3 dest_cpu=1 perf 1461 [000] 554.286964: sched_stat_sleep: comm=perf pid=1465 delay=133047190 [ns] perf 1461 [000] 554.286967: sched_wakeup: comm=perf pid=1465 prio=120 success=1 target_cpu=001 swapper 0 [001] 554.286976: sched_stat_wait: comm=perf pid=1465 delay=0 [ns] swapper 0 [001] 554.286983: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=perf [...] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1342631456-7233-1-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-05perf tools: Split event symbols arrays to hw and sw partsJiri Olsa1-57/+117
It'll be convenient in upcoming patch to access hw event symbols strings via enum perf_hw_id indexes. In order not to duplicate the data, creating two separate arrays: event_symbols_hw for enum perf_hw_id events event_symbols_sw for enum perf_sw_ids events Changing the current event list code to follow the change. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1341352848-11833-7-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-06-29perf evsel: Handle hw breakpoints event names in perf_evsel__name()Jiri Olsa1-3/+1
Adding hw breakpoint events hook in the perf_evsel__name function, to display event names properly all over the perf tools. Updated hw breakpoints events tests. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Jovi Zhang <bookjovi@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1340918329-3012-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-06-29perf tools: Fix hw breakpoint's type modifier parsingJiri Olsa1-3/+13
Fixing the hw breakpoint's type modifier parsing to allow all possible combinations of 'rwx' characters. Adding automated tests to the parsing test suite. Reported-by: Jovi Zhang <bookjovi@gmail.com> Original-patch-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Jovi Zhang <bookjovi@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120629072254.GA940@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-06-20Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/coreIngo Molnar1-186/+17
Pull perf improvements from Arnaldo Carvalho de Melo: * Replace event_name with perf_evsel__name, that handles the event modifiers and doesn't use static variables. * GTK browser improvements, from Namhyung Kim * Fix possible NULL pointer deref in the TUI annotate browser, from Samuel Liao * Add sort by source file:line number, using addr2line. * Allow printing histogram text snapshots at any point in top/report. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-19perf tools: Remove __event_nameArnaldo Carvalho de Melo1-55/+6
Not needed anymore, the parsing code can just leave evsel->name as NULL and the first call to perf_evsel__name() will do exactly what was being pre-cached using __event_name(). Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-cn2eiijcinnc97buod8cs34m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-06-19perf tools: Move all users of event_name to perf_evsel__nameArnaldo Carvalho de Melo1-7/+0
So that we don't use global variables that could make us misreport event names when having a multi window top, for instance. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-mccancovi1u0wdkg8ncth509@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-06-19perf evsel: Handle all event types in perf_evsel__nameArnaldo Carvalho de Melo1-18/+3
Now to convert all event_name users to perf_evsel__name. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-buuz0j0gynseglxa76r01rdn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-06-19perf tools: Reconstruct sw event with modifiers from perf_event_attrArnaldo Carvalho de Melo1-16/+3
[root@sandy ~]# perf record -e task-clock:u -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.482 MB perf.data (~21073 samples) ] [root@sandy ~]# Before: [root@sandy ~]# perf evlist task-clock [root@sandy ~]# After: [root@sandy ~]# perf evlist task-clock:u [root@sandy ~]# Ditto for other tools. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-97ltkmj7v23kyhflltf6iz5n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-06-19perf tools: Reconstruct hw cache event with modifiers from perf_event_attrArnaldo Carvalho de Melo1-100/+15
[root@sandy ~]# perf record -a -e dTLB-load-misses:u usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.486 MB perf.data (~21216 samples) ] Before: [root@sandy ~]# perf evlist dTLB-load-misses [root@sandy ~]# After: [root@sandy ~]# perf evlist dTLB-load-misses:u [root@sandy ~]# Ditto for other tools. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-7x1b0e6jthkr93lfjzsuakk5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-06-18perf/tool: Add PMU event alias supportZheng Yan1-0/+10
Add support to specify alias term within the event description. The definition of pmu event alias is located at: ${sysfs_mount}/bus/event_source/devices/${pmu}/events/ Each file in the 'events' directory defines a event alias. Its contents are like: config=1,config1=2 Using pmu event alias, an event can be now specified like: uncore/CLOCKTICKS/ or uncore/event=CLOCKTICKS/ Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> [ Cleaned it up. ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1339741902-8449-13-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-18perf/tool: Add support to reuse event grammar to parse out termsJiri Olsa1-3/+25
We want to reuse the event grammar for parsing aliased terms. The obvious reason is we dont need to add new code when there's already support for this in event grammar. Doing this by adding terms and event start entries into event parse grammar. The grammar forks on the begining based on the starting token, which is supplied via bison interface into the lexer. The lexer then returns the starting token as the first token, thus making the grammar switch accordingly. Currently 2 starting tokens/grammars are supported: PE_START_TERMS, PE_START_EVENTS The PE_START_TERMS related grammar uses 'event_config' part of the grammar for term parsing. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1339741902-8449-12-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-18perf/tool: Make the event parser re-entrantZheng Yan1-11/+24
Make the event parser reentrant by creating separate scanner for each parsing. The scanner is passed to the bison as and argument to the lexer. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> [ Cleaned up the patch. ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1339741902-8449-11-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-18perf/tool: Use data struct for arg passing in event parse functionJiri Olsa1-7/+9
Moving all the bison arguments into the structure. In upcomming patches we are going to: - add more arguments - reuse the grammer for term parsing so it's more clear to pack/separate related arguments. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1339741902-8449-10-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-25perf tools: Reconstruct event with modifiers from perf_event_attrArnaldo Carvalho de Melo1-16/+11
The modifiers: k kernel space u user space h hypervisor G guest H host p, pp, ppp precision level (PEBS) that can be suffixed to an event were lost when tools used event_name() to reconstruct them from the perf_event_attr entries in a perf.data file. Fix it by following the defaults used for these modifiers in the current codebase, so: $ perf record -e instructions:u usleep 1 2> /dev/null $ perf evlist instructions:u $ perf record -e cycles:k usleep 1 2> /dev/null $ perf evlist cycles:k $ perf record -e cycles:kh usleep 1 2> /dev/null $ perf evlist cycles:kh $ perf record -e cache-misses:G usleep 1 2> /dev/null $ perf evlist cache-misses:G $ perf record -e cycles:ppk usleep 1 2> /dev/null $ perf evlist cycles:kpp $ Also works with 'top', 'report', etc. More work needed to cover tracepoints and software events while not dragging lots of baggage to the python binding, this is a minimal fix for v3.5. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-4hl5glle0hxlklw4usva1mkt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22perf tools: Add hardcoded name term for pmu eventsJiri Olsa1-1/+22
Adding a new hardcoded term 'name' allowing to specify a name for the pmu event. The term is defined along with standard pmu terms. If no 'name' term is given, the event name follows following template: "raw 0x<perf_event_attr::config>" running: perf stat -e cpu/config=1,name=krava1/u ls will produce following output: ... Performance counter stats for 'ls': 0 krava1 ... running: perf stat -e cpu/config=1/u ls will produce following output: ... Performance counter stats for 'ls': 0 raw 0x1 ... Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337584373-2741-6-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22perf tools: Separate 'mem:' event scanner bitsJiri Olsa1-0/+1
Separating 'mem:' scanner processing, so we can parse out modifier specifically and dont clash with other rules. This is just precaution for the future, so we dont need to worry about the rules clashing where we need to parse out any sub-rule of global rules. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337584373-2741-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22perf tools: Use allocated list for each parsed eventJiri Olsa1-15/+24
Switch from using static temporary event list into dynamically allocated one. This way we dont need to pass temp list to the parse_events_parse which makes the interface more clear. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337584373-2741-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22perf tools: Add support for displaying event parser debug infoJiri Olsa1-0/+6
Adding PARSER_DEBUG Makefile variable to enable building event scanner/ parser with debug enabled. This results in verbose output right out of the scanner/parser. It's useful for debuging the event parser. Keeping this only for event parser so far. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337584373-2741-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-18perf tools: Split term type into value type and term typeJiri Olsa1-11/+34
Introducing type_val and type_term for term instead of a single type value. Currently the term type marked out the value type as well. With this change we can have future string term values being specified by user and translated into proper number along the processing. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1335371102-11358-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-22perf tools: Fix modifier to be applied on correct eventsJiri Olsa1-6/+21
The event modifier needs to be applied only on the event definition it is attached to. The current state is that in case of multiple events definition (in single '-e' option, separated by ',') all will get modifier of the last one. Fixing this by adding separated list for each event definition, so the modifier is applied only to proper event(s). Added automated test to catch this, plus some other modifier tests. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1332267341-26338-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-22perf tools: Fix various casting issues for 32 bitsJiri Olsa1-1/+1
- util/parse-events.c(parse_events_add_breakpoint) need to use unsigned long instead of u64, otherwise we get following gcc error on 32 bits: error: cast from pointer to integer of different size - util/header.c(print_event_desc) cannot retype to signed type, otherwise we get following gcc error on 32 bits: error: comparison between signed and unsigned integer expressions Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1332267341-26338-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-22Merge branch 'perf/urgent' into perf/coreArnaldo Carvalho de Melo1-1/+1
Merge Reason: to pick the fix: commit e7f01d1 perf tools: Use scnprintf where applicable Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16perf tools: Add support to specify pmu style eventJiri Olsa1-1/+30
Added new event rule to the event definition grammar: event_def: event_pmu | ... event_pmu: PE_NAME '/' event_config '/' Using this rule, event could be now specified like: cpu/config=1,config1=2,config2=3/u where pmu name 'cpu' is looked up via following path: ${sysfs_mount}/bus/event_source/devices/${pmu} and config options are bound to the pmu's format definiton: ${sysfs_mount}/bus/event_source/devices/${pmu}/format The hardcoded config options still stays and have precedence over any format field defined with same name. Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-50d8nr94f8k4wkezutrxvthe@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16perf tools: Add config options support for event parsingJiri Olsa1-3/+96
Adding a new rule to the event grammar to be able to specify values of additional attributes of symbolic event. The new syntax for event symbolic definition is: event_legacy_symbol: PE_NAME_SYM '/' event_config '/' | PE_NAME_SYM sep_slash_dc event_config: event_config ',' event_term | event_term event_term: PE_NAME '=' PE_NAME | PE_NAME '=' PE_VALUE PE_NAME sep_slash_dc: '/' | ':' | At the moment the config options are hardcoded to be used for legacy symbol events to define several perf_event_attr fields. It is: 'config' to define perf_event_attr::config 'config1' to define perf_event_attr::config1 'config2' to define perf_event_attr::config2 'period' to define perf_event_attr::sample_period Legacy events could be now specified as: cycles/period=100000/ If term is specified without the value assignment, then 1 is assigned by default. Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-mgkavww9790jbt2jdkooyv4q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16perf tools: Add parser generator for events parsingJiri Olsa1-338/+148
Changing event parsing to use flex/bison parse generator. The event syntax stays as it was. grammar description: events: events ',' event | event event: event_def PE_MODIFIER_EVENT | event_def event_def: event_legacy_symbol sep_dc | event_legacy_cache sep_dc | event_legacy_breakpoint sep_dc | event_legacy_tracepoint sep_dc | event_legacy_numeric sep_dc | event_legacy_raw sep_dc event_legacy_symbol: PE_NAME_SYM event_legacy_cache: PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT | PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT | PE_NAME_CACHE_TYPE event_legacy_raw: PE_SEP_RAW PE_VALUE event_legacy_numeric: PE_VALUE ':' PE_VALUE event_legacy_breakpoint: PE_SEP_BP ':' PE_VALUE ':' PE_MODIFIER_BP event_breakpoint_type: PE_MODIFIER_BPTYPE | empty PE_NAME_SYM: cpu-cycles|cycles | stalled-cycles-frontend|idle-cycles-frontend | stalled-cycles-backend|idle-cycles-backend | instructions | cache-references | cache-misses | branch-instructions|branches | branch-misses | bus-cycles | cpu-clock | task-clock | page-faults|faults | minor-faults | major-faults | context-switches|cs | cpu-migrations|migrations | alignment-faults | emulation-faults PE_NAME_CACHE_TYPE: L1-dcache|l1-d|l1d|L1-data | L1-icache|l1-i|l1i|L1-instruction | LLC|L2 | dTLB|d-tlb|Data-TLB | iTLB|i-tlb|Instruction-TLB | branch|branches|bpu|btb|bpc | node PE_NAME_CACHE_OP_RESULT: load|loads|read | store|stores|write | prefetch|prefetches | speculative-read|speculative-load | refs|Reference|ops|access | misses|miss PE_MODIFIER_EVENT: [ukhp]{0,5} PE_MODIFIER_BP: [rwx] PE_SEP_BP: 'mem' PE_SEP_RAW: 'r' sep_dc: ':' | Added flex/bison files for event grammar parsing. The generated parser is part of the patch. Added makefile rule 'event-parser' to generate the parser code out of the bison/flex sources. Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-u4pfig5waq3ll2bfcdex8fgi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-13perf record: Fix buffer overrun bug in tracepoint_id_to_path()Stephane Eranian1-1/+1
This patch fixes a buffer overrun bug in tracepoint_id_to_path(). The bug manisfested itself as a memory error reported by perf record. I ran into it with perf sched: $ perf sched rec noploop 2 noploop for 2 seconds [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 42.701 MB perf.data (~1865622 samples) ] Fatal: No memory to alloc tracepoints list It turned out that tracepoint_id_to_path() was reading the tracepoint id using read() but the buffer was not large enough to include the \n terminator for id with 4 digits or more. The patch fixes the problem by extending the buffer to a more reasonable size covering all possible id length include \n terminator. Note that atoll() stops at the first non digit character, thus it is not necessary to clear the buffer between each read. Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: fweisbec@gmail.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/20120313155102.GA6465@quad Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-06perf tools: Add support for guest/host-only profilingJoerg Roedel1-2/+12
To restrict a counter to either host or guest mode this patch introduces two new event modifiers: G and H. With G the counter is configured in guest-only mode and with H in host-only mode. Cc: Gleb Natapov <gleb@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/n/tip-or5aj3rghy9ngyg882z6kln9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-01-06perf kvm: Do guest-only counting by defaultJoerg Roedel1-0/+1
Make use of exclude_guest and exlude_host in perf-kvm to do only guest-only counting by default. Cc: Gleb Natapov <gleb@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> [ committer note: Moved perf_{guest,host} & event_attr_init to util.c ] [ so as not to drag more stuff to the python binding] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-21perf: Add support for PERF_HW_COUNT_REF_CPU_CYCLESStephane Eranian1-0/+2
Add new generic hw event: ref-cycles, which maps to PERF_HW_COUNT_REF_CPUCYCLES: $ perf stat -e ref-cycles ls Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1323559734-3488-5-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-28perf tools: Simplify debugfs mountpoint handling codeArnaldo Carvalho de Melo1-15/+13
We don't need to have two PATH_MAX char sized arrays holding it, just one in util/debugfs.c will do. Also rename debugfs_path to tracing_events_path, as it is not the path to debugfs, that is debugfs_mountpoint. Both are now accessible. This will allow accessing this code in the perf python binding without having to drag in perf.c and util/parse-events.c. The defaults for these variables are the canonical "/sys/kernel/debug" and "/sys/kernel/debug/tracing/events/", removing the need for simple tools to call debugfs_mount(NULL). Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ug9jvtjrsqbluuhqqxpvg30f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf tools: Fix error handling of unknown eventsStephane Eranian1-1/+5
There was a problem with the parse_events() code not printing the correct event name when an event was unknown and starting with an 'r'. The source of the problem was the way raw notation was parsed. Without the patch: $ perf stat -e retired_foo invalid event modifier: 'tired_foo' With the patch: $ perf stat -e retired_foo invalid or unsupported event: 'retired_foo' This also covers the case where the name of the event was not printed at all when perf was linked with libpfm4. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110723021043.GA20178@quad Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf list: Fix exit valueStephane Eranian1-2/+0
This patch fixes an issue with the exit value of perf list: $ perf list; echo $? 129 perf list returns an error exit code even though there is no error. There was a stray exit(129) in print_events(). This patch removes this exit(). $ perf list; echo $? 0 $ perf list hw sw cpu-cycles OR cycles [Hardware event] stalled-cycles-frontend OR idle-cycles-frontend [Hardware event] stalled-cycles-backend OR idle-cycles-backend [Hardware event] instructions [Hardware event] cache-references [Hardware event] cache-misses [Hardware event] branch-instructions OR branches [Hardware event] branch-misses [Hardware event] bus-cycles [Hardware event] cpu-clock [Software event] task-clock [Software event] page-faults OR faults [Software event] minor-faults [Software event] major-faults [Software event] context-switches OR cs [Software event] cpu-migrations OR migrations [Software event] alignment-faults [Software event] emulation-faults [Software event] $ echo $? 0 Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110523123917.GA31060@quad Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-07-21perf tools: De-opt the parse_events functionJiri Olsa1-10/+16
Moving out the option parameter from parse_events function, and adding new parse_events_option function instead. The option parameter is used only to carry "struct perf_evlist" pointer for chaining new events. Putting it away, enable us to call parse_events from other places without using the option parameter. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: acme@redhat.com Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Link: http://lkml.kernel.org/r/1310635534-4013-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21perf tools: Add missing 'node' alias to the hw_cache[] arrayJiri Olsa1-5/+8
Add "node" as a simple alias for NODE cache events. The addition of NODE cache events broke the parse_alias function, so any mismatched event caused the segfault, like: # ./perf stat -e krava ls The hw_cache/hw_cache_op/hw_cache_result arrays needs to follow PERF_COUNT_HW_CACHE_*MAX enums. Adding those MAXs to be size of those arrays, so possible ommision in future wil not lead to segfault. Adding read/write/prefetch as allowed operations for node cache event. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: acme@redhat.com Link: http://lkml.kernel.org/r/20110713205818.GB7827@jolsa.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.