aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/util/symbol.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-12-01perf callchain: Support handling complete branch stacks as histogramsAndi Kleen1-1/+2
Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-24perf symbols: Move bfd_demangle stubbing to its only userArnaldo Carvalho de Melo1-21/+0
We need to define bfd_demangle() to either a wrapper for cplus_demangle() or to a stub when NO_DEMANGLE is defined. That is at odds with using bfd.h for some other reason, as it defines bfd_demangle() and then if code that wants to use symbol.h, where the above stubbing/wrapping is done, and bfd.h for other reasons, we end up with a build error where bfd_demangle() is found to be redefined. Avoid that by moving the stubbing/wrapping to symbol-elf.c, that is the only user of such function. If we ever get to a point where there are more valid users, we can then introduce a header for that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6wzjpe2fy9xtgchshulixlzw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-05perf record: Do not save pathname in ./debug/.build-id directory for vmlinuxNamhyung Kim1-0/+1
When perf record finishes a session, it pre-processes samples in order to write build-id info from DSOs that had samples. During this process it'll call map__load() for the kernel map, and it ends up calling dso__load_vmlinux_path() which replaces dso->long_name. But this function checks kernel's build-id before searching vmlinux path so it'll end up with a cryptic name, the pathname for the entry in the ~/.debug cache, which can be confusing to users. This patch adds a flag to skip the build-id check during record, so that it'll have the original vmlinux path for the kernel dso->long_name, not the entry in the ~/.debug cache. Before: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ] Looking at the vmlinux_path (7 entries long) Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols After: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ] Looking at the vmlinux_path (7 entries long) Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-14perf symbols: Make sym->end be the first address after the symbol rangeArnaldo Carvalho de Melo1-1/+1
To follow vm_area_struct->vm_end convention. By adhering to the convention that ->end is the first address outside the symbol's range we can do things like: sym->end = start + len; len = sym->end - sym->start; This is also now the convention used for struct map->end, fixing some off-by-one bugs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-agomujr7tuqaq6lu7kr6z7h6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Disable kernel symbol demangling by defaultAvi Kivity1-0/+1
Some Linux symbols (for example __vt_event_wait) are interpreted by the demangler as C++ mangled names, which of course they aren't. Disable kernel symbol demangling by default to avoid this, and allow enabling it with a new option --demangle-kernel for those who wish it. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Avi Kivity <avi@cloudius-systems.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1410581705-26968-1-git-send-email-avi@cloudius-systems.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-13perf symbols: Don't demangle parameters and such by defaultNamhyung Kim1-0/+1
Some C++ symbols have very long name and they make column length longer. Most of them are about parameters including templates and we can ignore such info most of time IMHO. This patch passes DMGL_NO_OPTS by default when calling bfd_demangle(). One can still see full symbols with -v/--verbose option. before: JS_CallFunctionValue(JSContext*, JSObject*, JS::Value, unsigned int, JS::Value*, JS::Value*) after: JS_CallFunctionValue Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1406785662-5534-9-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-13perf tools: Check recorded kernel version when finding vmlinuxNamhyung Kim1-1/+2
Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-31perf symbols: Make sure --symfs usage includes the path separatorArnaldo Carvalho de Melo1-0/+9
Minchan reported that perf failed to load vmlinux if --symfs argument doesn't end with '/' character. Fix it by making sure that the '/' path separator is used when composing pathnames with a --symfs provided directory name. Reported-by: Minchan Kim <minchan@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8n4s6b6zvsez5ktanw006125@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-23perf tools: Add dso__type()Adrian Hunter1-0/+2
dso__type() determines wheather a dso is 32-bit, x32 (32-bit with 64-bit registers) or 64-bit. dso__type() will be used to determine the VDSO a program maps. Reviewed-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406035081-14301-51-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-16perf symbols: Add ability to iterate over a dso's symbolsAdrian Hunter1-0/+3
Expose dso__first_symbol() and dso__next_symbol() to make it possible to iterate over a dso's symbols. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1405332185-4050-27-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-16perf symbols: Record whether a dso is 64-bitAdrian Hunter1-0/+1
Add a flag to 'struct dso' to record if the dso is 64-bit or not. Update the flag when reading the ELF. This is needed for instruction decoding. For example, x86 instruction decoding depends on whether or not the 64-bit instruction set is used. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1405332185-4050-18-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-07perf hists browser: Add ui.show-headers config file optionJiri Olsa1-1/+2
Adding ui.show-headers config file option to define if the histogram entries headers will start visible or not. Currently columns headers are displayed by default, following lines in ~/.perfconfig file will disable that: [ui] show-headers = false Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1403886418-5556-4-git-send-email-jolsa@kernel.org [ renamed symbol_conf.show_headers to .show_hist_headers ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-01perf hists: Add support for accumulated stat of hist entryNamhyung Kim1-0/+1
Maintain accumulated stat information in hist_entry->stat_acc if symbol_conf.cumulate_callchain is set. Fields in ->stat_acc have same vaules initially, and will be updated as callchain is processed later. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arun Sharma <asharma@fb.com> Tested-by: Rodrigo Campos <rodrigo@sdfg.com.ar> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1401335910-16832-4-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-05perf tools: Move sample data structures from perf.hJiri Olsa1-0/+1
Into util/event.h header where all sample data structures are defined. Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1399293219-8732-7-git-send-email-jolsa@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-04-16perf report: Add --percentage optionNamhyung Kim1-1/+2
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute". "relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains the original value before and after the filter is applied. $ perf report -s comm # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc 6.11% as 4.35% sh 4.14% make 1.13% fixdep ... $ perf report -s comm -c cc1,gcc --percentage absolute # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc $ perf report -s comm -c cc1,gcc --percentage relative # Overhead Command # ........ ............ # 90.69% cc1 9.31% gcc Note that it has zero effect if no filter was applied. Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-3-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-03-18perf symbols: Record the reason for filtering an address_locationNamhyung Kim1-1/+1
By turning the addr_location->filtered member from a boolean to a u8 bitmap, reusing (and extending) the hist_filter enum for that. This patch doesn't change the logic at all, as it keeps the meaning of al->filtered !0 to mean that the entry _was_ filtered, so no change in how this value is interpreted needs to be done at this point. This will be soon used in upcoming patches. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-89hmfgtr9t22sky1lyg7nw7l@git.kernel.org [ yanked this out of a previous patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-18perf probe: Allow to add events on the local functionsMasami Hiramatsu1-0/+11
Allow to add events on the local functions without debuginfo. (With the debuginfo, we can add events even on inlined functions) Currently, probing on local functions requires debuginfo to locate actual address. It is also possible without debuginfo since we have symbol maps. Without this change; ---- # ./perf probe -a t_show Added new event: probe:t_show (on t_show) You can now use it in all perf tools, such as: perf record -e probe:t_show -aR sleep 1 # ./perf probe -x perf -a identity__map_ip no symbols found in /kbuild/ksrc/linux-3/tools/perf/perf, maybe install a debug package? Failed to load map. Error: Failed to add events. (-22) ---- As the above results, perf probe just put one event on the first found symbol for kprobe event. Moreover, for uprobe event, perf probe failed to find local functions. With this change; ---- # ./perf probe -a t_show Added new events: probe:t_show (on t_show) probe:t_show_1 (on t_show) probe:t_show_2 (on t_show) probe:t_show_3 (on t_show) You can now use it in all perf tools, such as: perf record -e probe:t_show_3 -aR sleep 1 # ./perf probe -x perf -a identity__map_ip Added new events: probe_perf:identity__map_ip (on identity__map_ip in /kbuild/ksrc/linux-3/tools/perf/perf) probe_perf:identity__map_ip_1 (on identity__map_ip in /kbuild/ksrc/linux-3/tools/perf/perf) probe_perf:identity__map_ip_2 (on identity__map_ip in /kbuild/ksrc/linux-3/tools/perf/perf) probe_perf:identity__map_ip_3 (on identity__map_ip in /kbuild/ksrc/linux-3/tools/perf/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:identity__map_ip_3 -aR sleep 1 ---- Now we succeed to put events on every given local functions for both kprobes and uprobes. :) Note that this also introduces some symbol rbtree iteration macros; symbols__for_each, dso__for_each_symbol, and map__for_each_symbol. These are for walking through the symbol list in a map. Changes from v2: - Fix add_exec_to_probe_trace_events() not to convert address to tp->symbol any more. - Fix to set kernel probes based on ref_reloc_sym. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140206053225.29635.15026.stgit@kbuild-fedora.yrl.intra.hitachi.co.jp Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-18perf symbols: No need to export dso__first_symbolArnaldo Carvalho de Melo1-1/+0
There are no users outside the file that defines it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-sybihqycxrmssa4df9516jib@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-16perf symbols: Export elf_section_by_name and reuseMasami Hiramatsu1-0/+5
Remove duplicated elf_section_by_name() functions from unwind.c and probe-event.c and use one exported elf_section_by_name() instance defined in symbol-elf.c. Note that this also moves get_text_start_address() to merge HAVE_DWARF_SUPPORT defined area. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140116093949.24403.38093.stgit@kbuild-fedora.novalocal Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19perf symbols: Add 'machine' member to struct addr_locationArnaldo Carvalho de Melo1-0/+1
The addr_location struct should fully qualify an address, and to do that it should have in it the machine where the thread was found. Thus all functions that receive an addr_location now don't need to also receive a 'machine', those functions just need to access al->machine instead, just like it does with the other parts of an address location: al->thread, al->map, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-o51iiee7vyq4r3k362uvuylg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-13tools lib symbol: Start carving out symbol parsing routines from perfArnaldo Carvalho de Melo1-3/+0
Eventually this should be useful to other tools/ living utilities. For now don't try to build any .a, just trying the minimal approach of separating existing code into multiple .c files that can then be included wherever they are needed, using whatever build machinery already in place. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pfa8i5zpf4bf9rcccryi0lt3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-10perf symbols: Set alloc flag close to setting the long_nameArnaldo Carvalho de Melo1-1/+2
This is a preparatory patch to do with dso__set_long_name what was done with the short name variant. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-mb7eqhkyejq1qcf3p22wz2x7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-27perf tools: Export setup_listDavid Ahern1-0/+3
Used in upcoming patches (perf sched timehist command). Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1384806771-2945-6-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-27perf symbols: Move idle syms check from top to generic functionDavid Ahern1-0/+1
Allows list of idle symbols to be leveraged by other commands, such as the upcoming timehist command. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1384806771-2945-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14perf buildid-cache: Add ability to add kcore to the cacheAdrian Hunter1-0/+3
kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14perf symbols: Workaround objdump difficulties with kcoreAdrian Hunter1-0/+14
The objdump tool fails to annotate module symbols when looking at kcore. Workaround this by extracting object code from kcore and putting it in a temporary file for objdump to use instead. The temporary file is created to look like kcore but contains only the function being disassembled. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1381320078-16497-3-git-send-email-adrian.hunter@intel.com [ Renamed 'index' to 'idx' to avoid shadowing string.h's 'index' in Fedora 12, Replace local with variable length with malloc/free to fix build in Fedora 12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf symbols: Make a separate function to parse /proc/modulesAdrian Hunter1-0/+3
Make a separate function to parse /proc/modules so that it can be reused. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1381221956-16699-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-09perf symbols: Add new option --ignore-vmlinux for perf topWilly Tarreau1-0/+1
Running "perf top" on a machine with possibly invalid or non-matching vmlinux at the various places results in no symbol resolving despite /proc/kallsyms being present and valid. Add a new option --ignore-vmlinux to explicitly indicate that we do not want to use these kernels and just use what we have (kallsyms). Signed-off-by: Willy Tarreau <w@1wt.eu> Cc: Ingo Molnar <mingo@redhat.com> Link: http://lkml.kernel.org/r/20130914083259.GA3418@1wt.eu Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-09tools/perf: Standardize feature support define names to: HAVE_{FEATURE}_SUPPORTIngo Molnar1-4/+4
Standardize all the feature flags based on the HAVE_{FEATURE}_SUPPORT naming convention: HAVE_ARCH_X86_64_SUPPORT HAVE_BACKTRACE_SUPPORT HAVE_CPLUS_DEMANGLE_SUPPORT HAVE_DWARF_SUPPORT HAVE_ELF_GETPHDRNUM_SUPPORT HAVE_GTK2_SUPPORT HAVE_GTK_INFO_BAR_SUPPORT HAVE_LIBAUDIT_SUPPORT HAVE_LIBELF_MMAP_SUPPORT HAVE_LIBELF_SUPPORT HAVE_LIBNUMA_SUPPORT HAVE_LIBUNWIND_SUPPORT HAVE_ON_EXIT_SUPPORT HAVE_PERF_REGS_SUPPORT HAVE_SLANG_SUPPORT HAVE_STRLCPY_SUPPORT Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-u3zvqejddfZhtrbYbfhi3spa@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-07perf symbols: Add support for reading from /proc/kcoreAdrian Hunter1-0/+5
In the absence of vmlinux, perf tools uses kallsyms for symbols. If the user has access, now also map to /proc/kcore. The dso data_type is now set to either DSO_BINARY_TYPE__KCORE or DSO_BINARY_TYPE__GUEST_KCORE as approprite. This patch breaks the "vmlinux symtab matches kallsyms" test. That is fixed in a following patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1375875537-4509-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01perf tools: Add mem access sampling core supportStephane Eranian1-0/+6
This patch adds the sorting and histogram support functions to enable profiling of memory accesses. The following sorting orders are added: - symbol_daddr: data address symbol (or raw address) - dso_daddr: data address shared object - locked: access uses locked transaction - tlb : TLB access - mem : memory level of the access (L1, L2, L3, RAM, ...) - snoop: access snoop mode Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1359040242-8269-12-git-send-email-eranian@google.com [ committer note: changed to cope with fc5871ed, the move of methods to machine.[ch], and the rename of dsrc to data_src, to match the change made in the PERF_SAMPLE_DSRC in a previous patch. ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-26perf report: Add --no-demangle optionNamhyung Kim1-1/+2
It's sometimes useful to see undemangled raw symbol name for example other tools using the perf output to do manipulation of binaries. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-by: William Cohen <wcohen@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: William Cohen <wcohen@redhat.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=55571 Link: http://lkml.kernel.org/r/1364203098-17741-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31perf report: Make another loop for linking group histsNamhyung Kim1-1/+2
Now the event grouping viewing requires linking all member hists in a group to the leader's. Thus hists__output_resort should be called after linking all events in evlist. Introduce symbol_conf.event_group flag to determine whether the feature is enabled or not. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1358845787-1350-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24perf symbols: Include elf.h header regardless LIBELF_SUPPORTNamhyung Kim1-1/+1
The elf.h header file is used for NO_LIBELF build too so it should be included anyway. Also remove duplicated include of the header file in symbol-*.c. This patch fixes following build error on NO_LIBELF build: CC tests/hists_link.o tests/hists_link.c: In function ‘setup_fake_machine’: tests/hists_link.c:132:8: error: ‘STB_GLOBAL’ undeclared (first use in this function) tests/hists_link.c:132:8: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1356679009-32122-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-12-09perf machine: Move more machine methods to machine.cArnaldo Carvalho de Melo1-0/+4
Mechanical, no functional changes. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-9ib6qtqge1jmms2luwu4udbx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-11-14perf tests: Final cleanup for builtin-test moveJiri Olsa1-1/+0
Final function renames to match test__* style and include cleanup. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1352508412-16914-12-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-11-09perf machine: Move more methods to machine.[ch]Arnaldo Carvalho de Melo1-20/+0
This time out of map.[ch] mostly, just code move plus a buch of 'self' removal, using machine or machines instead. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-j1vtux3vnu6wzmrjutpxnjcz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-29perf tools: Move dso_* related functions into dso objectJiri Olsa1-129/+5
Moving dso_* related functions into dso object. Keeping symbol loading related functions still in the symbol object as it seems more convenient. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1351372712-21104-6-git-send-email-jolsa@redhat.com [ committer note: Use "symbol.h" instead of <symbol.h> to make it build with O= ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-29perf tools: Move strxfrchar into string objectJiri Olsa1-2/+0
Moving strxfrchar function into string object. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1351372712-21104-5-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-29perf tools: Move hex2u64 into util objectJiri Olsa1-1/+0
Moving hex2u64 function into util object. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1351372712-21104-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-29perf tools: Move BUILD_ID_SIZE into build-id objectJiri Olsa1-2/+1
Moving BUILD_ID_SIZE define into build-id object, plus include related changes. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1351372712-21104-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-29perf tools: Move build_id__sprintf into build-id objectJiri Olsa1-1/+0
Moving build_id__sprintf function into build-id object. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1351372712-21104-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-28perf tools: Convert to LIBELF_SUPPORTNamhyung Kim1-5/+5
For building perf without libelf, we can set NO_LIBELF=1 as a argument of make. It then defines NO_LIBELF_SUPPORT macro for C code to do the proper handling. However it usually used in a negative semantics - e.g. #ifndef - so we saw double negations which can be misleading. Convert it to a positive form to make it more readable. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1348824728-14025-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf tools: bfd.h/libbfd detection fails with recent binutilsMarkus Trippelsdorf1-0/+1
With recent binutils I get: perf % make Makefile:668: No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demanglin That happens because bfd.h now contains: I've reopened a bug in the hope that this check will be deleted: http://sourceware.org/bugzilla/show_bug.cgi?id=14243 But in the meantime, the following patch fixes the problem Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/20120919072902.GA262@x4 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: Use __maybe_used for unused variablesIrina Tirdea1-3/+4
perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf symbols: Make dsos__find function globally availableJiri Olsa1-0/+1
Changing dsos__find function from static to be globally available. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347295819-23177-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf symbols: Remove BIONIC wrapper around libgen.hDavid Ahern1-2/+0
Now that the 2 offenders are fixed, the BIONIC conditional around libgen.h can be removed. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Irina Tirdea <irina.tirdea@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/1347116812-93646-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-07perf tools: include basename for non-glibc systemsIrina Tirdea1-0/+3
perf uses the glibc version of basename(), by defining _GNU_SOURCE, including string.h and not including libgen.h. The glibc version of basename is better than the POSIX version since it does not modify its argument. Android has only one version of basename which is defined in libgen.h. This version is the same as the glibc version. Error on Android: util/annotate.c: In function 'symbol__annotate_printf': util/annotate.c:503:3: error: implicit declaration of function 'basename' [-Werror=implicit-function-declaration] util/annotate.c:503:3: error: nested extern declaration of 'basename' [-Werror=nested-externs] util/annotate.c:503:14: error: assignment makes pointer from integer without a cast [-Werror] On Android libgen.h should be included to define basename. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347065004-15306-6-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-13perf symbols: Use both runtime and debug imagesCody P Schafer1-0/+1
We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-13perf symbols: Convert dso__load_syms to take 2 symsrc'sCody P Schafer1-2/+3
To properly handle platforms with an opd section, both a runtime image (which contains the opd section but possibly lacks symbols) and a symbol image (which probably lacks an opd section but has symbols). The next patch ("perf symbol: use both runtime and debug images") adjusts the callsite in dso__load() to take advantage of being able to pass both runtime & debug images. Assumptions made here: - The opd section, if it exists in the runtime image, has headers in both the runtime image and the debug/syms image. - The index of the opd section (again, only if it exists in the runtime image) is the same in both the runtime and debug/symbols image. Both of these are true on RHEL, but it is unclear how accurate they are in general (on platforms with function descriptors in opd sections). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-16-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.