| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The synthesized event TIME_CONV doesn't contain the complete parameters
for counters, this will lead to wrong conversion between counter cycles
and timestamp.
This patch extends event TIME_CONV to record flags 'cap_user_time_zero'
which is used to indicate the counter parameters are valid or not, if
not will directly return 0 for timestamp calculation. And record the
flag 'cap_user_time_short' and its relevant fields 'time_cycles' and
'time_mask' for cycle calibration.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kemeng Shi <shikemeng@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Gasson <nick.gasson@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steve Maclean <steve.maclean@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zou Wei <zou_wei@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200914115311.2201-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf mmap'ed buffer contains the flag 'cap_user_time_short' and two
extra fields 'time_cycles' and 'time_mask', perf tool needs to know them
for handling the counter wrapping case.
This patch is to reads out the relevant parameters from the head of the
first mmap'ed page and stores into the structure 'perf_tsc_conversion',
if the flag 'cap_user_time_short' has been set, it will firstly
calibrate cycle value for timestamp calculation.
Committer testing:
Before/after:
# perf test tsc
70: Convert perf time to TSC : Ok
#
# perf test -v tsc
70: Convert perf time to TSC :
--- start ---
test child forked, pid 11059
mmap size 528384B
1st event perf time 996384576521 tsc 3850532906613
rdtsc time 996384578455 tsc 3850532913950
2nd event perf time 996384578845 tsc 3850532915428
test child finished with 0
---- end ----
Convert perf time to TSC: Ok
#
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kemeng Shi <shikemeng@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Gasson <nick.gasson@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steve Maclean <steve.maclean@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zou Wei <zou_wei@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200914115311.2201-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Functions perf_read_tsc_conversion() and perf_event__synth_time_conv()
should work as common functions rather than x86 specific, so move these
two functions out from arch/x86 folder and place them into util/tsc.c.
Since the function perf_event__synth_time_conv() will be linked in
util/tsc.c, remove its weak version.
Committer testing:
Before/after:
# perf test tsc
70: Convert perf time to TSC : Ok
#
# perf test -v tsc
70: Convert perf time to TSC :
--- start ---
test child forked, pid 8520
mmap size 528384B
1st event perf time 592110439891 tsc 2317172044331
rdtsc time 592110441915 tsc 2317172052010
2nd event perf time 592110442336 tsc 2317172053605
test child finished with 0
---- end ----
Convert perf time to TSC: Ok
#
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kemeng Shi <shikemeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Gasson <nick.gasson@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steve Maclean <steve.maclean@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zou Wei <zou_wei@huawei.com>
Link: http://lore.kernel.org/lkml/20200914115311.2201-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since 'perf probe' heavily depends on debuginfo, debuginfod gives us
many benefits on the 'perf probe' command on remote machine.
Especially, this will be helpful for the embedded devices which will not
have enough storage, or boot with a cross-build kernel whose source code
is in the host machine.
This will work as similar to commit c7a14fdcb3fa7736 ("perf build-ids:
Fall back to debuginfod query if debuginfo not found")
Tested with:
(host) $ cd PATH/TO/KBUILD/DIR/
(host) $ debuginfod -F .
...
(remote) # perf probe -L vfs_read
Failed to find the path for the kernel: No such file or directory
Error: Failed to show lines.
(remote) # export DEBUGINFOD_URLS="http://$HOST_IP:8002/"
(remote) # perf probe -L vfs_read
<vfs_read@...>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
{
2 ssize_t ret;
if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (ret)
return ret;
if (count > MAX_RW_COUNT)
...
(remote) # perf probe -a "vfs_read count"
Added new event:
probe:vfs_read (on vfs_read with count)
(remote) # perf probe -l
probe:vfs_read (on vfs_read@ksrc/linux/fs/read_write.c with count)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Frank Ch. Eigler <fche@redhat.com>
Cc: Aaron Merey <amerey@redhat.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Link: http://lore.kernel.org/lkml/160041610083.912668.13659563860278615846.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf probe' uses ref_reloc_sym to adjust symbol offset address from
debuginfo address or ref_reloc_sym based address, but that is misusing
reloc_sym->addr and reloc_sym->unrelocated_addr. If map is not
relocated (map->reloc == 0), we can use reloc_sym->addr as unrelocated
address instead of reloc_sym->unrelocated_addr.
This usually does not happen. If we have a non-stripped ELF binary, we
will use it for map and debuginfo, if not, we use only kallsyms without
debuginfo. Thus, the map is always relocated (ELF and DWARF binary) or
not relocated (kallsyms).
However, if we allow the combination of debuginfo and kallsyms based map
(like using debuginfod), we have to check the map->reloc and choose the
collect address of reloc_sym.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Frank Ch. Eigler <fche@redhat.com>
Cc: Aaron Merey <amerey@redhat.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Link: http://lore.kernel.org/lkml/160041609047.912668.14314639291419159274.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A metric like DRAM_BW_Use has on SkylakeX events uncore_imc/cas_count_read/
and uncore_imc/case_count_write/.
These events open 6 events per socket with pmu names of
uncore_imc_[0-5].
The current metric setup code in find_evsel_group assumes one ID will
map to 1 event to be recorded in metric_events.
For events with multiple matches, the first event is recorded in
metric_events (avoiding matching >1 event with the same name) and the
evlist_used updated so that duplicate events aren't removed when the
evlist has unused events removed.
Before this change:
$ /tmp/perf/perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
41.14 MiB uncore_imc/cas_count_read/
1,002,614,251 ns duration_time
1.002614251 seconds time elapsed
After this change:
$ /tmp/perf/perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
157.47 MiB uncore_imc/cas_count_read/ # 0.00 DRAM_BW_Use
126.97 MiB uncore_imc/cas_count_write/
1,003,019,728 ns duration_time
Erroneous duplication introduced in:
commit 2440689d62e9 ("perf metricgroup: Remove duped metric group events").
Fixes: ded80bda8bc9 ("perf expr: Migrate expr ids table to a hashmap").
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200917201807.4090224-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A context_switch event can have no tid because pids can be detached from
a task while the task is still running (in do_exit()). Note this won't
happen with per-task contexts because then tracing stops at
perf_event_exit_task()
If a task with no tid gets preempted, or a dying task gets preempted and
its parent releases it, when it subsequently gets switched back in,
Intel PT will not be able to determine what task is running and prints
an error "context_switch event has no tid". However, it is not really an
error because the task is in kernel space and the decoder can continue
to decode successfully. Fix by changing the error to be only a logged
message, and make allowance for tid == -1.
Example:
Using 5.9-rc4 with Preemptible Kernel (Low-Latency Desktop) e.g.
$ uname -r
5.9.0-rc4
$ grep PREEMPT .config
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_RCU=y
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DEBUG_PREEMPT=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
Before:
$ cat forkit.c
#include <sys/types.h>
#include <unistd.h>
#include <sys/wait.h>
int main()
{
pid_t child;
int status = 0;
child = fork();
if (child == 0)
return 123;
wait(&status);
return 0;
}
$ gcc -o forkit forkit.c
$ sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k &
[1] 11016
$ taskset 2 ./forkit
$ sudo pkill perf
$ [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 17.262 MB perf.data ]
[1]+ Terminated sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k
$ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
context_switch event has no tid
taskset 11019 [001] 66663.270045029: 1 instructions:k: ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
taskset 11019 [001] 66663.270201816: 1 instructions:k: ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
forkit 11019 [001] 66663.270420028: 1 instructions:k: ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
forkit 11019 [001] 66663.270648704: 1 instructions:k: ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
forkit 11019 [001] 66663.270833163: 1 instructions:k: ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
forkit 11019 [001] 66663.271092359: 1 instructions:k: ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 11020/11020
forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019
forkit 11020 [001] 66663.271312066: 1 instructions:k: ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11019/11019
forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11020/11020
forkit 11019 [001] 66663.271517241: 1 instructions:k: ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)
After:
$ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
taskset 11019 [001] 66663.270045029: 1 instructions:k: ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
taskset 11019 [001] 66663.270201816: 1 instructions:k: ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
forkit 11019 [001] 66663.270420028: 1 instructions:k: ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
forkit 11019 [001] 66663.270648704: 1 instructions:k: ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
forkit 11019 [001] 66663.270833163: 1 instructions:k: ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
forkit 11019 [001] 66663.271092359: 1 instructions:k: ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 11020/11020
forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019
forkit 11020 [001] 66663.271312066: 1 instructions:k: ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11019/11019
forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11020/11020
forkit 11019 [001] 66663.271517241: 1 instructions:k: ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)
forkit 11019 [001] 66663.271688752: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: -1/-1
:-1 -1 [001] 66663.271692086: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019
:-1 -1 [001] 66663.271707466: 1 instructions:k: ffffffffb18eb096 update_load_avg+0x306 ([kernel.kallsyms])
Fixes: 86c2786994bd7c ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lore.kernel.org/lkml/20200909084923.9096-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The kernel can release tasks while they are still running. This can
result in a task having no tid, in which case perf records a tid of -1.
Improve the perf script output in that case.
Example:
Before:
# cat ./autoreap.c
#include <sys/types.h>
#include <unistd.h>
#include <sys/wait.h>
#include <signal.h>
struct sigaction act = {
.sa_handler = SIG_IGN,
};
int main()
{
pid_t child;
int status = 0;
sigaction(SIGCHLD, &act, NULL);
child = fork();
if (child == 0)
return 123;
wait(&status);
return 0;
}
# gcc -o autoreap autoreap.c
# ./perf record -a -e dummy --switch-events ./autoreap
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.948 MB perf.data ]
# ./perf script --show-task-events --show-switch-events | grep -C2 'autoreap\|4294967295\|-1'
swapper 0 [004] 18462.673613: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25189/25189
perf 25189 [004] 18462.673614: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
autoreap 25189 [004] 18462.673800: PERF_RECORD_COMM exec: autoreap:25189/25189
autoreap 25189 [004] 18462.674042: PERF_RECORD_FORK(25191:25191):(25189:25189)
autoreap 25189 [004] 18462.674050: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [004] 18462.674051: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 25189/25189
swapper 0 [005] 18462.674083: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25191/25191
autoreap 25191 [005] 18462.674084: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
swapper 0 [003] 18462.674121: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
rcu_preempt 11 [003] 18462.674121: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
rcu_preempt 11 [003] 18462.674124: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [003] 18462.674124: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11
autoreap 25191 [005] 18462.674138: PERF_RECORD_EXIT(25191:25191):(25189:25189)
PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [005] 18462.674149: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4294967295/4294967295
swapper 0 [004] 18462.674182: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25189/25189
autoreap 25189 [004] 18462.674183: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
autoreap 25189 [004] 18462.674218: PERF_RECORD_EXIT(25189:25189):(25188:25188)
autoreap 25189 [004] 18462.674225: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [004] 18462.674226: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 25189/25189
swapper 0 [007] 18462.674257: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25188/25188
After:
# ./perf script --show-task-events --show-switch-events | grep -C2 'autoreap\|4294967295\|-1'
swapper 0 [004] 18462.673613: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25189/25189
perf 25189 [004] 18462.673614: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
autoreap 25189 [004] 18462.673800: PERF_RECORD_COMM exec: autoreap:25189/25189
autoreap 25189 [004] 18462.674042: PERF_RECORD_FORK(25191:25191):(25189:25189)
autoreap 25189 [004] 18462.674050: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [004] 18462.674051: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 25189/25189
swapper 0 [005] 18462.674083: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25191/25191
autoreap 25191 [005] 18462.674084: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
swapper 0 [003] 18462.674121: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
rcu_preempt 11 [003] 18462.674121: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
rcu_preempt 11 [003] 18462.674124: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [003] 18462.674124: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11
autoreap 25191 [005] 18462.674138: PERF_RECORD_EXIT(25191:25191):(25189:25189)
:-1 -1 [005] 18462.674149: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [005] 18462.674149: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: -1/-1
swapper 0 [004] 18462.674182: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25189/25189
autoreap 25189 [004] 18462.674183: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
autoreap 25189 [004] 18462.674218: PERF_RECORD_EXIT(25189:25189):(25188:25188)
autoreap 25189 [004] 18462.674225: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [004] 18462.674226: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 25189/25189
swapper 0 [007] 18462.674257: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25188/25188
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lore.kernel.org/lkml/20200909084923.9096-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Icelake has support for reporting per thread TopDown metrics.
These are reported differently than the previous TopDown support,
each metric is standalone, but scaled to pipeline "slots".
We don't need to do anything special for HyperThreading anymore.
Teach perf stat --topdown to handle these new metrics and
print them in the same way as the previous TopDown metrics.
The restrictions of only being able to report information per core is
gone.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200911144808.27603-4-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With the hardware TopDown metrics feature, sample-read feature should be
supported for a topdown group, e.g., sample a non-topdown event and read
a topdown metric group. But the current perf record code errors out.
For a topdown metric group, the slots event must be the leader of the
group, but the leader slots event doesn't support sampling.
To support sample-read the topdown metric group, use the 2nd event of
the group as the "leader" for the purposes of sampling.
Only the platform with Topdown metic feature supports sample-read the
topdown group. Add arch_topdown_sample_read() to indicate whether the
topdown group supports sample-read.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200911144808.27603-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The group.h/c only include TopDown group related functions. The name
"group" is too generic and inaccurate. Use the name "topdown" to replace
it.
Move topdown related functions to a dedicated file, topdown.c.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200911144808.27603-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add the machine__for_each_dso() to iterate over all dso objects defined
for the within a machine object. It will be used in the MMAP3 patch
series.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200913210313.1985612-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200917060219.1287863-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Like evlist cpu map, evsel's cpu map should have a proper refcount.
As it's created with a refcount, we don't need to get an extra count.
Thanks to Arnaldo for the simpler suggestion.
This, together with the following patch, fixes the following ASAN
report:
Direct leak of 840 byte(s) in 70 object(s) allocated from:
#0 0x7fe36703f628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
#1 0x559fbbf611ca in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x559fbbf6229c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237
#3 0x559fbbcc6c6d in __add_event util/parse-events.c:357
#4 0x559fbbcc6c6d in add_event_tool util/parse-events.c:408
#5 0x559fbbcc6c6d in parse_events_add_tool util/parse-events.c:1414
#6 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
#7 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
#8 0x559fbbcc95da in __parse_events util/parse-events.c:2141
#9 0x559fbbc2788b in check_parse_id tests/pmu-events.c:406
#10 0x559fbbc2788b in check_parse_id tests/pmu-events.c:393
#11 0x559fbbc2788b in check_parse_fake tests/pmu-events.c:436
#12 0x559fbbc2788b in metric_parse_fake tests/pmu-events.c:553
#13 0x559fbbc27e2d in test_parsing_fake tests/pmu-events.c:599
#14 0x559fbbc27e2d in test_parsing_fake tests/pmu-events.c:574
#15 0x559fbbc0109b in run_test tests/builtin-test.c:410
#16 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
#17 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
#18 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
#19 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#20 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#21 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#22 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#23 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308
And I've failed which commit introduced this bug as the code was
heavily changed since then. ;-/
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200917060219.1287863-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf stat' displays miss ratio of L1-dcache, L1-icache, dTLB cache,
iTLB cache and LL-cache. Take L1-dcache for example, miss ratio is
caculated as "L1-dcache-load-misses/L1-dcache-loads". So "of all
L1-dcache hits" is unsuitable to describe it, and "of all L1-dcache
accesses" seems better.
The comments of L1-icache, dTLB cache, iTLB cache and LL-cache are
fixed in the same way.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1600253331-10535-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following leaks were detected by ASAN:
Indirect leak of 360 byte(s) in 9 object(s) allocated from:
#0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
#4 0x560578e07045 in test__pmu tests/pmu.c:155
#5 0x560578de109b in run_test tests/builtin-test.c:410
#6 0x560578de109b in test_and_print tests/builtin-test.c:440
#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
#8 0x560578de401a in cmd_test tests/builtin-test.c:807
#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: cff7f956ec4a1 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's dangerous to free the original metric when it's called from
resolve_metric() as it's already in the metric_list and might have other
resources too. Instead, it'd better let them bail out and be released
properly at the later stage.
So add a check when it's called from metricgroup__add_metric() and
release it. Also make sure that mp is set properly.
Fixes: 83de0b7d535de ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The metricgroup__add_metric() can find multiple match for a metric group
and it's possible to fail. Also it can fail in the middle like in
resolve_metric() even for single metric.
In those cases, the intermediate list and ids will be leaked like:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683
#2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906
#3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940
#4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993
#5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045
#6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087
#7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164
#8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196
#9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318
#10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356
#11 0x55f7e70be09b in run_test tests/builtin-test.c:410
#12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 83de0b7d535de ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The test_generic_metric() missed to release entries in the pctx. Asan
reported following leak (and more):
Direct leak of 128 byte(s) in 1 object(s) allocated from:
#0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14)
#2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497)
#3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111
#4 0x55f7e7341667 in expr__add_ref util/expr.c:120
#5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783
#6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858
#7 0x55f7e712390b in compute_single tests/parse-metric.c:128
#8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180
#9 0x55f7e712446d in compute_metric tests/parse-metric.c:196
#10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295
#11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355
#12 0x55f7e70be09b in run_test tests/builtin-test.c:410
#13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 6d432c4c8aa56 ("perf tools: Add test_generic_metric function")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The evsel->unit borrows a pointer of pmu event or alias instead of
owns a string. But tool event (duration_time) passes a result of
strdup() caused a leak.
It was found by ASAN during metric test:
Direct leak of 210 byte(s) in 70 object(s) allocated from:
#0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414
#2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414
#3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
#4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
#5 0x559fbbcc95da in __parse_events util/parse-events.c:2141
#6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406
#7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393
#8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415
#9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498
#10 0x559fbbc0109b in run_test tests/builtin-test.c:410
#11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
#12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
#13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
#14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: f0fbb114e3025 ("perf stat: Implement duration_time as a proper event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Asan reported leak of cpu and thread maps as they have one more refcount
than released. I found that after setting evlist maps it should release
it's refcount.
It seems to be broken from the beginning so I chose the original commit
as the culprit. But not sure how it's applied to stable trees since
there are many changes in the code after that.
Fixes: 7e2ed097538c5 ("perf evlist: Store pointer to the cpu and thread maps")
Fixes: 4112eb1899c0e ("perf evlist: Default to syswide target when no thread/cpu maps set")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The metric_event_delete() missed to free expr->metric_events and it
should free an expr when metric_refs allocation failed.
Fixes: 4ea2896715e67 ("perf metric: Collect referenced metrics in struct metric_expr")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I found some memory leaks while reading the metric code. Some are real
and others only occur in the error path. When it failed during metric
or event parsing, it should release all resources properly.
Fixes: b18f3e365019d ("perf stat: Support JSON metrics in perf stat")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The aliases were never released causing the following leaks:
Indirect leak of 1224 byte(s) in 9 object(s) allocated from:
#0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
#1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322
#2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778
#3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295
#4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367
#5 0x56332c76a09b in run_test tests/builtin-test.c:410
#6 0x56332c76a09b in test_and_print tests/builtin-test.c:440
#7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695
#8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807
#9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 956a78356c24c ("perf test: Test pmu-events aliases")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If events in a group explicitly set a frequency or period with leader
sampling, don't disable the samples on those events.
Prior to 5.8:
perf record -e '{cycles/period=12345000/,instructions/period=6789000/}:S'
would clear the attributes then apply the config terms. In commit
5f34278867b7 leader sampling configuration was moved to after applying the
config terms, in the example, making the instructions' event have its period
cleared.
This change makes it so that sampling is only disabled if configuration
terms aren't present.
Committer testing:
Before:
# perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.051 MB perf.data (6 samples) ]
#
# perf evlist -v
cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
instructions/period=2/: size: 120, config: 0x1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1
#
After:
# perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 0.0001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (4 samples) ]
# perf evlist -v
cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
instructions/period=2/: size: 120, config: 0x1, { sample_period, sample_freq }: 2, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1
#
Fixes: 5f34278867b7 ("perf evlist: Move leader-sampling configuration")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before:
$ perf record -c 10000 --pfm-events=cycles:period=77777
Would yield a cycles event with period=10000, instead of 77777.
the event string and perf record initializing the event.
This was due to an ordering issue between libpfm4 parsing
events with attr->sample_period != 0 by the time
intent of the author.
perf_evsel__config() is invoked. This seems to have been the
This patch fixes the problem by preventing override for
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-3-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
evsel__config() would only set PERF_RECORD_PERIOD if it set attr->freq
from perf record options. When it is set by libpfm events, it would not
get set. This changes evsel__config to see if attr->freq is set outside
of whether or not it changes attr->freq itself.
Signed-off-by: David Sharp <dhsharp@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: david sharp <dhsharp@google.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-2-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's no longer need to call test_attr__open() from
sys_perf_event_open(), because both 'perf record' and 'perf stat' call
evsel__open_cpu(), so we can call it directly from there and not polute
the perf-sys.h header.
Committer testing:
Before and after:
# perf test attr
17: Setup struct perf_event_attr : Ok
49: Synthesize attr update : Ok
# perf test -v attr
17: Setup struct perf_event_attr :
--- start ---
test child forked, pid 2170868
running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any_ret'
unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any_ret'
running '/home/acme/libexec/perf-core/tests/attr/test-record-C0'
running '/home/acme/libexec/perf-core/tests/attr/test-record-graph-fp'
running '/home/acme/libexec/perf-core/tests/attr/test-record-period'
running '/home/acme/libexec/perf-core/tests/attr/test-record-group-sampling'
running '/home/acme/libexec/perf-core/tests/attr/test-record-freq'
running '/home/acme/libexec/perf-core/tests/attr/test-stat-detailed-3'
running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-k'
unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-k'
running '/home/acme/libexec/perf-core/tests/attr/test-stat-group1'
running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-u'
unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-u'
running '/home/acme/libexec/perf-core/tests/attr/test-stat-basic'
running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any_call'
unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any_call'
running '/home/acme/libexec/perf-core/tests/attr/test-stat-default'
running '/home/acme/libexec/perf-core/tests/attr/test-record-graph-dwarf'
running '/home/acme/libexec/perf-core/tests/attr/test-record-no-buffering'
running '/home/acme/libexec/perf-core/tests/attr/test-record-raw'
running '/home/acme/libexec/perf-core/tests/attr/test-stat-detailed-2'
running '/home/acme/libexec/perf-core/tests/attr/test-record-count'
running '/home/acme/libexec/perf-core/tests/attr/test-record-data'
running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any'
unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any'
running '/home/acme/libexec/perf-core/tests/attr/test-stat-group'
running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-any'
unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-any'
running '/home/acme/libexec/perf-core/tests/attr/test-record-graph-default'
running '/home/acme/libexec/perf-core/tests/attr/test-record-no-samples'
running '/home/acme/libexec/perf-core/tests/attr/test-stat-C0'
running '/home/acme/libexec/perf-core/tests/attr/test-record-no-inherit'
running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-ind_call'
unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-ind_call'
running '/home/acme/libexec/perf-core/tests/attr/test-record-basic'
running '/home/acme/libexec/perf-core/tests/attr/test-record-group1'
running '/home/acme/libexec/perf-core/tests/attr/test-record-pfm-period'
unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-pfm-period'
running '/home/acme/libexec/perf-core/tests/attr/test-stat-detailed-1'
running '/home/acme/libexec/perf-core/tests/attr/test-stat-no-inherit'
running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-hv'
unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-hv'
running '/home/acme/libexec/perf-core/tests/attr/test-record-group'
test child finished with 0
---- end ----
Setup struct perf_event_attr: Ok
49: Synthesize attr update :
--- start ---
test child forked, pid 2171004
test child finished with 0
---- end ----
Synthesize attr update: Ok
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200827193201.GB127372@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch adds passing of pmu_event as a parameter in function
'arch_get_runtimeparam' which can be used to get details like if the
event is percore/perchip.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200907064133.75090-5-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add missing character.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200910032632.511566-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
No need to set os.evsel twice.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200910032632.511566-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch from deprecated bpf_program__title() API to
bpf_program__section_name(). Also drop unnecessary error checks because
neither bpf_program__title() nor bpf_program__section_name() can fail or
return NULL.
Fixes: 521095842027 ("libbpf: Deprecate notion of BPF program "title" in favor of "section name"")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20200908180127.1249-1-andriin@fb.com
|
|
It was printed unconditionally even if nothing is printed.
Check if the output list empty when filter is given.
Before:
$ ./perf list duration
List of pre-defined events (to be used in -e):
duration_time [Tool event]
Metric Groups:
After:
$ ./perf list duration
List of pre-defined events (to be used in -e):
duration_time [Tool event]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200909055849.469612-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Consolidate control option fifo closing into one function.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Suggested-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200903122937.25691-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
# perf annotate --stdio2 acpi_processor_ffh_cstate_enter > default
# perf config annotate.disassembler_style=intel
# perf config annotate.disassembler_style
annotate.disassembler_style=intel
# perf annotate --stdio2 acpi_processor_ffh_cstate_enter > intel
# diff -u default intel
--- default 2020-09-04 13:09:26.019205732 -0300
+++ intel 2020-09-04 13:09:52.823795081 -0300
@@ -1,42 +1,42 @@
Samples: 1K of event 'cycles', 4000 Hz, Event count (approx.): 990065316, [percent: local period]
acpi_processor_ffh_cstate_enter() /lib/modules/5.9.0-rc3/build/vmlinux
-Percent → callq __fentry__
- mov cpu_number,%edx
- mov %edx,%edx
- mov cpu_cstate_entry,%rax
- add -0x7dbe9700(,%rdx,8),%rax
- movzbl 0x9(%rdi),%edx
- mov 0x4(%rax,%rdx,8),%edi
- mov (%rax,%rdx,8),%esi
- → jmpq 137ccc6
- 2d: → jmpq 137ccd8
+Percent → call __fentry__
+ mov edx,DWORD PTR gs:[rip+0x7e541d74]
+ mov edx,edx
+ mov rax,QWORD PTR [rip+0x152b8fb]
+ add rax,QWORD PTR [rdx*8-0x7dbe9700]
+ movzx edx,BYTE PTR [rdi+0x9]
+ mov edi,DWORD PTR [rax+rdx*8+0x4]
+ mov esi,DWORD PTR [rax+rdx*8]
+ → jmp 137ccc6
+ 2d: → jmp 137ccd8
mfence
- mov %gs:0x17bc0,%rax
- clflush (%rax)
+ mov rax,QWORD PTR gs:0x17bc0
+ clflush BYTE PTR [rax]
mfence
- xor %edx,%edx
- mov %rdx,%rcx
- mov %gs:0x17bc0,%rax
- 0.00 monitor %rax,%ecx,%edx
- mov (%rax),%rax
- test $0x8,%al
+ xor edx,edx
+ mov rcx,rdx
+ mov rax,QWORD PTR gs:0x17bc0
+ 0.00 monitor
+ mov rax,QWORD PTR [rax]
+ test al,0x8
↓ jne 71
- ↓ jmpq 68
- verw 0x538b08(%rip) # ffffffff82008150 <ds.0>
- 68: mov %rsi,%rax
- mov %rdi,%rcx
-100.00 mwait %eax,%ecx
- 71: mov %gs:0x17bc0,%rax
- lock andb $0xdf,0x2(%rax)
- lock addl $0x0,-0x4(%rsp)
- mov (%rax),%rax
- test $0x8,%al
+ ↓ jmp 68
+ verw WORD PTR [rip+0x538b08] # ffffffff82008150 <ds.0>
+ 68: mov rax,rsi
+ mov rcx,rdi
+100.00 mwait
+ 71: mov rax,QWORD PTR gs:0x17bc0
+ lock and BYTE PTR [rax+0x2],0xdf
+ lock add DWORD PTR [rsp-0x4],0x0
+ mov rax,QWORD PTR [rax]
+ test al,0x8
↓ je 97
- andl $0x7fffffff,__preempt_count
- 97: ← retq
- mov %gs:0x17bc0,%rax
- lock orb $0x20,0x2(%rax)
- mov (%rax),%rax
- test $0x8,%al
+ and DWORD PTR gs:[rip+0x7e548509],0x7fffffff
+ 97: ret
+ mov rax,QWORD PTR gs:0x17bc0
+ lock or BYTE PTR [rax+0x2],0x20
+ mov rax,QWORD PTR [rax]
+ test al,0x8
↑ jne 71
- ↑ jmpq 2d
+ ↑ jmp 2d
#
Requested-by: Matt P. Dziubinski <matdzb@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add 'snapshot' control command to create an AUX area tracing snapshot
the same as if sending SIGUSR2. The advantage of the FIFO is that access
is governed by access to the FIFO.
Example:
$ mkfifo perf.control
$ mkfifo perf.ack
$ cat perf.ack &
[1] 15235
$ sudo ~/bin/perf record --control fifo:perf.control,perf.ack -S -e intel_pt//u -- sleep 60 &
[2] 15243
$ ps -e | grep perf
15244 pts/1 00:00:00 perf
$ kill -USR2 15244
bash: kill: (15244) - Operation not permitted
$ echo snapshot > perf.control
ack
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200901093758.32293-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Enable the --control option to accept file names as an alternative to
file descriptors.
Example:
$ mkfifo perf.control
$ mkfifo perf.ack
$ cat perf.ack &
[1] 6808
$ perf record --control fifo:perf.control,perf.ack -- sleep 300 &
[2] 6810
$ echo disable > perf.control
$ Events disabled
ack
$ echo enable > perf.control
$ Events enabled
ack
$ echo disable > perf.control
$ Events disabled
ack
$ kill %2
[ perf record: Woken up 4 times to write data ]
$ [ perf record: Captured and wrote 0.018 MB perf.data (7 samples) ]
[1]- Done cat perf.ack
[2]+ Terminated perf record --control fifo:perf.control,perf.ack -- sleep 300
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200902105707.11491-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Handle read errors from ctl_fd such as EINTR, EAGAIN and EWOULDBLOCK.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200901093758.32293-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Consolidate --control option parsing into one function, in preparation
for adding FIFO file name options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200901093758.32293-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Wine generates PE binaries for its code modules and also generates debug
files in PE or PDB formats, which perf cannot parse either.
Trying to read symbols on non-ELF binaries with libbfd, when supported,
makes it possible for perf to report symbols and annotations for Windows
applications running under Wine.
Because libbfd doesn't provide symbol size (probably because of some
backends not supporting it), we compute it by first sorting the symbols
by addresses and then considering that they are sequential in a given
section.
v3: Also include local and weak bfd symbols and mark them as such, only
global symbols were previously reported, and that caused a very
imprecise address to symbol resolution.
Signed-off-by: Remi Bernon <rbernon@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jacek Caban <jacek@codeweavers.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200821165238.1340315-2-rbernon@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Wine generates PE binaries for most of its modules and perf is unable to
parse these files to get build_id or .gnu_debuglink section.
Using libbfd when available, instead of libelf, makes it possible to
resolve debug file location regardless of the dso binary format.
Committer notes:
Made the filename__read_build_id() variant that uses abfd->build_id
depend on the feature test that defines HAVE_LIBBFD_BUILDID_SUPPORT, to
get this to continue building with older libbfd/binutils.
Signed-off-by: Remi Bernon <rbernon@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jacek Caban <jacek@codeweavers.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200821165238.1340315-1-rbernon@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When validating kcore modules the do_validate_kcore_modules function
checks on every kernel module dso against modules record. The
__map__is_kmodule check is used to get only kernel module dso objects
through.
Currently the bpf images are slipping through the check and making the
validation to fail, so report falls back from kcore usage to kallsyms.
Adding __map__is_bpf_image check for bpf image and adding it to
__map__is_kmodule check.
Fixes: 3c29d4483e85 ("perf annotate: Add basic support for bpf_image")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's a risk that outputting interval mode summaries by default breaks
CSV consumers. It already broke pmu-tools/toplev.
So now we turn off the summary by default but we create a new option
'--summary' to enable the summary. This is active even when not using
CSV mode.
Before:
root@kbl-ppc:~# perf stat -I1000 --interval-count 2
# time counts unit events
1.000265904 8,005.73 msec cpu-clock # 8.006 CPUs utilized
1.000265904 601 context-switches # 0.075 K/sec
1.000265904 10 cpu-migrations # 0.001 K/sec
1.000265904 0 page-faults # 0.000 K/sec
1.000265904 66,746,521 cycles # 0.008 GHz
1.000265904 71,874,398 instructions # 1.08 insn per cycle
1.000265904 13,356,781 branches # 1.668 M/sec
1.000265904 298,756 branch-misses # 2.24% of all branches
2.001857667 8,012.52 msec cpu-clock # 8.013 CPUs utilized
2.001857667 164 context-switches # 0.020 K/sec
2.001857667 10 cpu-migrations # 0.001 K/sec
2.001857667 2 page-faults # 0.000 K/sec
2.001857667 5,822,188 cycles # 0.001 GHz
2.001857667 2,186,170 instructions # 0.38 insn per cycle
2.001857667 442,378 branches # 0.055 M/sec
2.001857667 44,750 branch-misses # 10.12% of all branches
Performance counter stats for 'system wide':
16,018.25 msec cpu-clock # 7.993 CPUs utilized
765 context-switches # 0.048 K/sec
20 cpu-migrations # 0.001 K/sec
2 page-faults # 0.000 K/sec
72,568,709 cycles # 0.005 GHz
74,060,568 instructions # 1.02 insn per cycle
13,799,159 branches # 0.861 M/sec
343,506 branch-misses # 2.49% of all branches
2.004118489 seconds time elapsed
After:
root@kbl-ppc:~# perf stat -I1000 --interval-count 2
# time counts unit events
1.001336393 8,013.28 msec cpu-clock # 8.013 CPUs utilized
1.001336393 82 context-switches # 0.010 K/sec
1.001336393 8 cpu-migrations # 0.001 K/sec
1.001336393 0 page-faults # 0.000 K/sec
1.001336393 4,199,121 cycles # 0.001 GHz
1.001336393 1,373,991 instructions # 0.33 insn per cycle
1.001336393 270,681 branches # 0.034 M/sec
1.001336393 31,659 branch-misses # 11.70% of all branches
2.003905006 8,020.52 msec cpu-clock # 8.021 CPUs utilized
2.003905006 184 context-switches # 0.023 K/sec
2.003905006 8 cpu-migrations # 0.001 K/sec
2.003905006 2 page-faults # 0.000 K/sec
2.003905006 5,446,190 cycles # 0.001 GHz
2.003905006 2,312,547 instructions # 0.42 insn per cycle
2.003905006 451,691 branches # 0.056 M/sec
2.003905006 37,925 branch-misses # 8.40% of all branches
root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary
# time counts unit events
1.001313128 8,013.20 msec cpu-clock # 8.013 CPUs utilized
1.001313128 83 context-switches # 0.010 K/sec
1.001313128 8 cpu-migrations # 0.001 K/sec
1.001313128 0 page-faults # 0.000 K/sec
1.001313128 4,470,950 cycles # 0.001 GHz
1.001313128 1,440,045 instructions # 0.32 insn per cycle
1.001313128 283,222 branches # 0.035 M/sec
1.001313128 33,576 branch-misses # 11.86% of all branches
2.003857385 8,020.34 msec cpu-clock # 8.020 CPUs utilized
2.003857385 154 context-switches # 0.019 K/sec
2.003857385 8 cpu-migrations # 0.001 K/sec
2.003857385 2 page-faults # 0.000 K/sec
2.003857385 4,515,676 cycles # 0.001 GHz
2.003857385 2,180,449 instructions # 0.48 insn per cycle
2.003857385 435,254 branches # 0.054 M/sec
2.003857385 31,179 branch-misses # 7.16% of all branches
Performance counter stats for 'system wide':
16,033.53 msec cpu-clock # 7.992 CPUs utilized
237 context-switches # 0.015 K/sec
16 cpu-migrations # 0.001 K/sec
2 page-faults # 0.000 K/sec
8,986,626 cycles # 0.001 GHz
3,620,494 instructions # 0.40 insn per cycle
718,476 branches # 0.045 M/sec
64,755 branch-misses # 9.01% of all branches
2.006124542 seconds time elapsed
Fixes: c7e5b328a8d4 ("perf stat: Report summary for interval mode")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200903010113.32232-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To address these errors found when cross building from x86_64 to MIPS
little endian 32-bit:
CC /tmp/build/perf/util/parse-events-bison.o
util/parse-events.y: In function 'parse_events_parse':
util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
514 | (void *) $2, $6, $4);
| ^
util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
531 | (void *) $2, NULL, $4)) {
| ^
util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
547 | (void *) $2, $4, 0);
| ^
util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
564 | (void *) $2, NULL, 0)) {
| ^
Fixes: cabbf26821aa210f ("perf parse: Before yyabort-ing free components")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 42bbabed09ce6208 ("perf tools: Add hw_idx in struct branch_stack")
changed the format of branch stacks in perf samples. When samples use
this new format, a flag must be set in the corresponding event.
Synthesized branch stacks generated from Intel PT were using the new
format, but not setting the event attribute, leading to consumers
seeing corrupt data. This patch fixes the issue by setting the event
attribute to indicate use of the new format.
Fixes: 42bbabed09ce6208 ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Al Grant <al.grant@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200819084751.17686-2-leo.yan@linaro.org
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 42bbabed09ce6208 ("perf tools: Add hw_idx in struct branch_stack")
changed the format of branch stacks in perf samples. When samples use
this new format, a flag must be set in the corresponding event.
Synthesized branch stacks generated from CoreSight ETM trace were using
the new format, but not setting the event attribute, leading to
consumers seeing corrupt data. This patch fixes the issue by setting the
event attribute to indicate use of the new format.
Fixes: 42bbabed09ce6208 ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Al Grant <al.grant@arm.com>
Reviewed-by: Andrea Brunato <andrea.brunato@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: http://lore.kernel.org/lkml/20200819084751.17686-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With a fake_pmu the pmu_info isn't populated by perf_pmu__check_alias.
In this case, don't try to copy the uninitialized values to the evsel.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826042910.1902374-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
David S. Miller
Leo Yan
Masami Hiramatsu
Ian Rogers
Adrian Hunter
Andi Kleen
Kan Liang
Jiri Olsa
Arnaldo Carvalho de Melo
Namhyung Kim
Qi Liu
Stephane Eranian
David Sharp
Jiri Olsa
Kajol Jain
Andrii Nakryiko
Jakub Kicinski
Remi Bernon
Jin Yao
Al Grant