| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix TUI progress bar when delta from new total from that of the
previous update is greater than the progress "step" (screen width
progress bar block)) (Jiri Olsa)
- Make tools/lib/api make DEBUG=1 build use -D_FORTIFY_SOURCE=2 not
to cripple debuginfo, just like tools/perf/ does (Jiri Olsa)
- Avoid leaking the 'perf.data' file to workloads started from the
'perf record' command line by using the O_CLOEXEC open flag (Jiri Olsa)
- Fix building when libunwind's 'unwind.h' file is present in the
include path, clashing with tools/perf/util/unwind.h (Milian Wolff)
- Check per .perfconfig section entry flag, not just per section (Taeung Song)
- Support running perf binaries with a dash in their name, needed to
run perf as an AppImage (Milian Wolff)
- Wait for the right child by using waitpid() when running workloads
from 'perf stat', also to fix using perf as an AppImage (Milian Wolff)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull perf tooling updates from Ingo Molnar:
"Perf tooling updates and fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf annotate browser: Help for cycling thru hottest instructions with TAB/shift+TAB
perf stat: Only auto-merge events that are PMU aliases
perf test: Add test case for PERF_SAMPLE_PHYS_ADDR
perf script: Support physical address
perf mem: Support physical address
perf sort: Add sort option for physical address
perf tools: Support new sample type for physical address
perf vendor events powerpc: Remove duplicate events
perf intel-pt: Fix syntax in documentation of config option
perf test powerpc: Fix 'Object code reading' test
perf trace: Support syscall name globbing
perf syscalltbl: Support glob matching on syscall names
perf report: Calculate the average cycles of iterations
|
|
When packaging the perf userland application into an AppImage, the
wait() call in perf stat returned too early. It turned out that some
other child process exited, but not the one perf stat launched:
$ sudo strace -e fork,execve,clone,wait4 -f ./perf-x86_64.AppImage stat sleep 1
execve("./perf-git.3a73b7f9-x86_64.AppImage", ["./perf-git.3a73b7f9-x86_64.AppIm"..., "stat", "sleep", "1"], 0x7ffec1bbf050 /* 18 vars */) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f6a6e7efe50) = 3912
strace: Process 3912 attached
[pid 3912] clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f6a6e7efe50) = 3914
strace: Process 3914 attached
[pid 3912] +++ exited with 0 +++
[pid 3911] --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=3912, si_uid=0, si_status=0, si_utime=0, si_stime=0} ---
[pid 3914] clone(strace: Process 3915 attached
child_stack=0x7f6a6d9fefb0, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0x7f6a6d9ff9d0, tls=0x7f6a6d9ff700, child_tidptr=0x7f6a6d9ff9d0) = 3915
[pid 3911] execve("/tmp/.mount_perf-g6VYMpl/AppRun", ["./perf-git.3a73b7f9-x86_64.AppIm"..., "stat", "sleep", "1"], 0x14aab70 /* 21 vars */) = 0
[pid 3911] clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f4ae113c4d0) = 3916
strace: Process 3916 attached
[pid 3911] wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 3912
[pid 3916] execve("/usr/libexec/perf-core/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/tmp/./sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/home/milian/.bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/usr/lib/icecream/libexec/icecc/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/ssd2/milian/projects/compiled/other/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/home/milian/.bin/kf5/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/ssd2/milian/projects/compiled/kf5/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/home/milian/projects/compiled/other/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/home/milian/projects/compiled/kf5/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/usr/local/sbin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/usr/local/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
[pid 3916] execve("/usr/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */
Performance counter stats for 'sleep 1':
<not counted> task-clock
<not counted> context-switches
<not counted> cpu-migrations
<not counted> page-faults
<not counted> cycles
<not counted> instructions
<not counted> branches
<not counted> branch-misses
0.000047194 seconds time elapsed
[pid 3916] --- SIGTERM {si_signo=SIGTERM, si_code=SI_USER, si_pid=3911, si_uid=0} ---
[pid 3916] +++ killed by SIGTERM +++
[pid 3911] --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_KILLED, si_pid=3916, si_uid=0, si_status=SIGTERM, si_utime=0, si_stime=0} ---
[pid 3915] --- SIGPIPE {si_signo=SIGPIPE, si_code=SI_USER, si_pid=3914, si_uid=0} ---
[pid 3911] +++ exited with 0 +++
[pid 3915] --- SIGHUP {si_signo=SIGHUP, si_code=SI_USER, si_pid=3914, si_uid=0} ---
[pid 3915] +++ exited with 0 +++
+++ exited with 0 +++
This patch uses waitpid instead to ensure the call waits for the
debuggee application launched by 'perf stat'. This fixes 'perf stat'
when launched from an AppImage:
$ ./perf-x86_64.AppImage stat sleep 1
Performance counter stats for 'sleep 1':
0.357235 task-clock (msec) # 0.000 CPUs utilized
1 context-switches # 0.003 M/sec
0 cpu-migrations # 0.000 K/sec
50 page-faults # 0.140 M/sec
1269602 cycles # 3.554 GHz
654278 instructions # 0.52 insn per cycle
129963 branches # 363.803 M/sec
7082 branch-misses # 5.45% of all branches
1.000633420 seconds time elapsed
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170912152523.4497-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously the part behind "perf-" was interpreted as an internal perf
command. If the suffix could not be handled, the execution was stopped.
This makes it impossible to launch perf binaries that got renamed to
have the `perf-` prefix. This is e.g. the case for appimages (e.g.
"perf-x86_64.AppImage"), but would also apply to all other scenarios
where users symlink or rename perf themselves:
Status quo with the broken behavior:
$ ln -s ./perf ./perf-custom-suffix
$ ./perf-custom-suffix list
cannot handle custom-suffix internally$
Also note the missing newline at the end of the error message.
With this patch applied, the above works properly:
$ ./perf-custom-suffix list
List of pre-defined events (to be used in -e):
...
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170911111422.31903-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently section->from_system_config is being checked multiple times.
item->from_system_config should be checked instead, when iterating thru
the items in a section. Fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1504754325-9724-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We currently update the 'next' variable only with a single step value.
But it's possible the 'adv' update is bigger than single 'step' value.
This would leave 'next' value under counted and force unnecessary
ui_progress__ops->update calls.
Calculate the amount of steps we need for 'adv' update and increase the
'next' with that amounts of steps.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Unlikely, but we could have ui_progress__init being called with total <
16, which would set the next and step variables to 0. That would force
unnecessary ui_progress__ops->update calls because 'next' would never
raise.
Forcing the next and step values to be always > 0.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Do not carry the perf.data file descriptor into the workload process and
close it when perf executes the workload.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908084621.31595-2-jolsa@kernel.org
[ Add definitions for O_CLOEXEC for older systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When cross compiling perf and I want to link against a self-compiled
libunwind, I usually make the custom path where the libunwind headers
exist visible by adding the libunwind prefix to the include path when
compiling perf, i.e.:
~~~~~
$ ls $HOME/projects/compiled/other/include/
libunwind-coredump.h libunwind.h libunwind-x86_64.h
libunwind-common.h libunwind-dynamic.h libunwind-ptrace.h
unwind.h
$ make EXTRA_CFLAGS="-I$HOME/projects/compiled/other/include/
~~~~~~
Note the `unwind.h` header from libunwind which leads to compile
errors when compiling tests/dwarf-unwind.c, since it shadows perf's
util/unwind.h:
~~~~~
tests/dwarf-unwind.c:41:32: error: ‘struct unwind_entry’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
static int unwind_entry(struct unwind_entry *entry, void *arg)
^~~~~~~~~~~~
tests/dwarf-unwind.c: In function ‘unwind_entry’:
tests/dwarf-unwind.c:44:22: error: dereferencing pointer to incomplete type ‘struct unwind_entry’
char *symbol = entry->sym ? entry->sym->name : NULL;
^~
tests/dwarf-unwind.c: In function ‘unwind_thread’:
tests/dwarf-unwind.c:92:8: error: implicit declaration of function ‘unwind__get_entries’; did you mean ‘unwind_entry’? [-Werror=implicit-function-declaration]
err = unwind__get_entries(unwind_entry, &cnt, thread,
^~~~~~~~~~~~~~~~~~~
unwind_entry
tests/dwarf-unwind.c:92:8: error: nested extern declaration of ‘unwind__get_entries’ [-Werror=nested-externs]
~~~~~~
Fix this compile error by specificing an explicit include of perf's
unwind.h in the util folder.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170906150209.12579-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.14-rc1.
Lots of different stuff in here, it's been an active development cycle
for some reason. Highlights are:
- updated binder driver, this brings binder up to date with what
shipped in the Android O release, plus some more changes that
happened since then that are in the Android development trees.
- coresight updates and fixes
- mux driver file renames to be a bit "nicer"
- intel_th driver updates
- normal set of hyper-v updates and changes
- small fpga subsystem and driver updates
- lots of const code changes all over the driver trees
- extcon driver updates
- fmc driver subsystem upadates
- w1 subsystem minor reworks and new features and drivers added
- spmi driver updates
Plus a smattering of other minor driver updates and fixes.
All of these have been in linux-next with no reported issues for a
while"
* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
ANDROID: binder: don't queue async transactions to thread.
ANDROID: binder: don't enqueue death notifications to thread todo.
ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
ANDROID: binder: push new transactions to waiting threads.
ANDROID: binder: remove proc waitqueue
android: binder: Add page usage in binder stats
android: binder: fixup crash introduced by moving buffer hdr
drivers: w1: add hwmon temp support for w1_therm
drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
drivers: w1: add hwmon support structures
eeprom: idt_89hpesx: Support both ACPI and OF probing
mcb: Fix an error handling path in 'chameleon_parse_cells()'
MCB: add support for SC31 to mcb-lpc
mux: make device_type const
char: virtio: constify attribute_group structures.
Documentation/ABI: document the nvmem sysfs files
lkdtm: fix spelling mistake: "incremeted" -> "incremented"
perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
nvmem: include linux/err.h from header
...
|
|
The popup help accessed via 'h' wasn't mentioning about TAB and
shift-TAB, just about 'H', which goes to the hottest line, while the
former two are the hotkeys for actually cycling thru the hottest lines.
Reported-by: Flavio Bruno Leitner <fbl@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5ppym6odizfj1ifa4t7neiku@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Peter reported that when he explicitely asked for multiple events with
the same name on the command line it got coalesced into just one line,
i.e.:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
3,269,652 cycles
0.000884123 seconds time elapsed
#
And while there is the --no-merges option to disable that auto-merging,
this is a blunt change in behaviour for such explicit request, so change
the code so that this auto merging is done only when handling the multi
PMU aliases with the same name that introduced this coalescing,
restoring the previous behaviour for the explicit case:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,472,837 cycles
1,472,837 cycles
1,472,837 cycles
0.001764870 seconds time elapsed
#
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 430daf2dc7af ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20170831184122.GK4831@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Extend sample-parsing test cases to support new sample type
PERF_SAMPLE_PHYS_ADDR.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-6-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Display the physical address at the tail if it is available.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add option phys-data in "perf mem" to record/report physical address.
The default mem sort order for physical address is changed accordingly.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new sort option "phys_daddr" for --mem-mode sort. With this
option applied, perf can sort and report by sample's physical address.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Support new sample type PERF_SAMPLE_PHYS_ADDR for physical address.
Add new option --phys-data to record sample physical address.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-2-git-send-email-kan.liang@intel.com
[ Added missing printing in evsel.c patch sent by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some POWER PMU event names have multiple/alternate event codes. These
alternate event codes were listed in the POWER9 JSON files for
reference.
But the perf tool does not seem to handle duplicates cleanly. 'perf
list' shows such duplicate events only once, but 'perf stat' ends up
counting the first event code twice, multiplexing if necessary and we
end up with double the event counts.
Remove the duplicate event codes from the JSON files for now.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20170830231506.GB20351@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As specified in tools/perf/Documentation/perf-config.txt, perf
configuration items must be in 'key = value' format, otherwise the
following error message occurs:
$ perf record -e intel_pt//u -- ls
bad config file line 2 in ~/.perfconfig
$ cat .perfconfig
[intel-pt]
mispred-all
Changing to assigning a value to the key 'mispred-all' fixes the issue:
$ perf record -e intel_pt//u -- ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Capured and wrote 0.031 MB perf.data]
$ cat .perfconfig
[intel-pt]
mispred-all = true
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170831080535.2157-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'Object code reading' test always fails on powerpc guest. Two reasons
for the failure are:
1. When elf section is too big (size beyond 'unsigned int' max value).
objdump fails to disassemble from such section. This was fixed with
commit 0f6329bd7fc ("binutils/objdump: Fix disassemble for huge elf
sections") in binutils.
2. When the sample is from hypervisor. Hypervisor symbols can not be
resolved within guest and thus thread__find_addr_map() fails for such
symbols. Fix this by ignoring hypervisor symbols in the test.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1504170896-7876-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So now we can use:
# perf trace -e pkey_*
532.784 ( 0.006 ms): pkey/16018 pkey_alloc(init_val: DISABLE_WRITE) = -1 EINVAL Invalid argument
532.795 ( 0.004 ms): pkey/16018 pkey_mprotect(start: 0x7f380d0a6000, len: 4096, prot: READ|WRITE, pkey: -1) = 0
532.801 ( 0.002 ms): pkey/16018 pkey_free(pkey: -1 ) = -1 EINVAL Invalid argument
^C[root@jouet ~]#
Or '-e epoll*', '-e *msg*', etc.
Combining syscall names with perf events, tracepoints, etc, continues to
be valid, i.e. this is possible:
# perf probe -L sys_nanosleep
<SyS_nanosleep@/home/acme/git/linux/kernel/time/hrtimer.c:0>
0 SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp,
struct timespec __user *, rmtp)
{
struct timespec64 tu;
5 if (get_timespec64(&tu, rqtp))
6 return -EFAULT;
if (!timespec64_valid(&tu))
9 return -EINVAL;
11 current->restart_block.nanosleep.type = rmtp ? TT_NATIVE : TT_NONE;
12 current->restart_block.nanosleep.rmtp = rmtp;
13 return hrtimer_nanosleep(&tu, HRTIMER_MODE_REL, CLOCK_MONOTONIC);
}
# perf probe my_probe="sys_nanosleep:12 rmtp"
Added new event:
probe:my_probe (on sys_nanosleep:12 with rmtp)
You can now use it in all perf tools, such as:
perf record -e probe:my_probe -aR sleep 1
#
# perf trace -e probe:my_probe/max-stack=5/,*sleep sleep 1
0.427 ( 0.003 ms): sleep/16690 nanosleep(rqtp: 0x7ffefc245090) ...
0.430 ( ): probe:my_probe:(ffffffffbd112923) rmtp=0)
sys_nanosleep ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
__nanosleep_nocancel (/usr/lib64/libc-2.25.so)
0.427 (1000.208 ms): sleep/16690 ... [continued]: nanosleep()) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-elycoi8wy6y0w9dkj7ox1mzz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With two new methods, one to find the first match, returning its syscall
id and its index in whatever internal database it keeps the syscall
into, then one to find the next match, if any.
Implemented only on arches where we actually read the syscall table from
the kernel sources, i.e. x86-64 for now, all the others use the libaudit
method for which this returns -1, i.e. just stubs were added, with the
actual implementation using whatever libaudit functions for matching
that may be available.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i0sj4rxk1a63pfe9gl8z8irs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The branch history code has a loop detection function. With this, we can
get the number of iterations by calculating the removed loops.
While it would be nice for knowing the average cycles of iterations.
This patch adds up the cycles in branch entries of removed loops and
save the result to the next branch entry (e.g. branch entry A).
Finally it will display the iteration number and average cycles at the
"from" of branch entry A.
For example:
perf record -g -j any,save_type ./div
perf report --branch-history --no-children --stdio
--22.63%--main div.c:42 (RET CROSS_2M)
compute_flag div.c:28 (cycles:2 iter:173115 avg_cycles:2)
|
--10.73%--compute_flag div.c:27 (RET CROSS_2M)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M)
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1502111115-18305-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On x86, the plt header size is as same as the plt entry size, and can be
identified from shdr's sh_entsize of the plt.
But we can't assume that the sh_entsize of the plt shdr is always the
plt entry size in all architecture, and the plt header size may be not
as same as the plt entry size in some architecure.
On ARM, the plt header size is 20 bytes and the plt entry size is 12
bytes (don't consider the FOUR_WORD_PLT case) that refer to the binutils
implementation. The plt section is as follows:
Disassembly of section .plt:
000004a0 <__cxa_finalize@plt-0x14>:
4a0: e52de004 push {lr} ; (str lr, [sp, #-4]!)
4a4: e59fe004 ldr lr, [pc, #4] ; 4b0 <_init+0x1c>
4a8: e08fe00e add lr, pc, lr
4ac: e5bef008 ldr pc, [lr, #8]!
4b0: 00008424 .word 0x00008424
000004b4 <__cxa_finalize@plt>:
4b4: e28fc600 add ip, pc, #0, 12
4b8: e28cca08 add ip, ip, #8, 20 ; 0x8000
4bc: e5bcf424 ldr pc, [ip, #1060]! ; 0x424
000004c0 <printf@plt>:
4c0: e28fc600 add ip, pc, #0, 12
4c4: e28cca08 add ip, ip, #8, 20 ; 0x8000
4c8: e5bcf41c ldr pc, [ip, #1052]! ; 0x41c
On AARCH64, the plt header size is 32 bytes and the plt entry size is 16
bytes. The plt section is as follows:
Disassembly of section .plt:
0000000000000560 <__cxa_finalize@plt-0x20>:
560: a9bf7bf0 stp x16, x30, [sp,#-16]!
564: 90000090 adrp x16, 10000 <__FRAME_END__+0xf8a8>
568: f944be11 ldr x17, [x16,#2424]
56c: 9125e210 add x16, x16, #0x978
570: d61f0220 br x17
574: d503201f nop
578: d503201f nop
57c: d503201f nop
0000000000000580 <__cxa_finalize@plt>:
580: 90000090 adrp x16, 10000 <__FRAME_END__+0xf8a8>
584: f944c211 ldr x17, [x16,#2432]
588: 91260210 add x16, x16, #0x980
58c: d61f0220 br x17
0000000000000590 <__gmon_start__@plt>:
590: 90000090 adrp x16, 10000 <__FRAME_END__+0xf8a8>
594: f944c611 ldr x17, [x16,#2440]
598: 91262210 add x16, x16, #0x988
59c: d61f0220 br x17
NOTES:
In addition to ARM and AARCH64, other architectures, such as
s390/alpha/mips/parisc/poperpc/sh/sparc/xtensa also need to consider
this issue.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: David Tolnay <dtolnay@gmail.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Link: http://lkml.kernel.org/r/1496622849-21877-1-git-send-email-huawei.libin@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The commit 9aaf5a5f479b ("perf probe: Check kprobes blacklist when
adding new events"), 'perf probe' supports checking the blacklist of the
fuctions which can not be probed. But the checking condition is wrong,
that the end_addr of the symbol which is the start_addr of the next
symbol can't be included.
Committer notes:
IOW make it match its kernel counterpart in kernel/kprobes.c:
bool within_kprobe_blacklist(unsigned long addr)
Each entry have as its end address not its end address, but the first
address _outside_ that symbol, which for related functions, is the first
address of the next symbol, like these from kernel/trace/trace_probe.c:
0xffffffffbd198df0-0xffffffffbd198e40 print_type_u8
0xffffffffbd198e40-0xffffffffbd198e90 print_type_u16
0xffffffffbd198e90-0xffffffffbd198ee0 print_type_u32
0xffffffffbd198ee0-0xffffffffbd198f30 print_type_u64
0xffffffffbd198f30-0xffffffffbd198f80 print_type_s8
0xffffffffbd198f80-0xffffffffbd198fd0 print_type_s16
0xffffffffbd198fd0-0xffffffffbd199020 print_type_s32
0xffffffffbd199020-0xffffffffbd199070 print_type_s64
0xffffffffbd199070-0xffffffffbd1990c0 print_type_x8
0xffffffffbd1990c0-0xffffffffbd199110 print_type_x16
0xffffffffbd199110-0xffffffffbd199160 print_type_x32
0xffffffffbd199160-0xffffffffbd1991b0 print_type_x64
But not always:
0xffffffffbd1997b0-0xffffffffbd1997c0 fetch_kernel_stack_address (kernel/trace/trace_probe.c)
0xffffffffbd1c57f0-0xffffffffbd1c58b0 __context_tracking_enter (kernel/context_tracking.c)
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Fixes: 9aaf5a5f479b ("perf probe: Check kprobes blacklist when adding new events")
Link: http://lkml.kernel.org/r/1504011443-7269-1-git-send-email-huawei.libin@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Reuse 'mprotect' beautifiers for 'pkey_mprotect'.
System wide tracing pkey_alloc, pkey_free and pkey_mprotect calls, with
backtraces:
# perf trace -e pkey_alloc,pkey_mprotect,pkey_free --max-stack=5
0.000 ( 0.011 ms): pkey/7818 pkey_alloc(init_val: DISABLE_ACCESS|DISABLE_WRITE) = -1 EINVAL Invalid argument
syscall (/usr/lib64/libc-2.25.so)
pkey_alloc (/home/acme/c/pkey)
0.022 ( 0.003 ms): pkey/7818 pkey_mprotect(start: 0x7f28c3890000, len: 4096, prot: READ|WRITE, pkey: -1) = 0
syscall (/usr/lib64/libc-2.25.so)
pkey_mprotect (/home/acme/c/pkey)
0.030 ( 0.002 ms): pkey/7818 pkey_free(pkey: -1 ) = -1 EINVAL Invalid argument
syscall (/usr/lib64/libc-2.25.so)
pkey_free (/home/acme/c/pkey)
The tools/include/uapi/asm-generic/mman-common.h file is used to find
the access rights defines for the pkey_alloc syscall second argument.
Since we have the detector of changes for the tools/include header files
versus its kernel origin (include/uapi/asm-generic/mman-common.h), we'll
get whatever new flag appears for that argument automatically.
This method should be used in other cases where it is easy to generate
those flags tables because the header has properly namespaced defines
like PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3xq5312qlks7wtfzv2sk3nct@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When building with an external FEATURES_DUMP, bpf complains
that features dump file is not found. Fix it by passing full file path.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-7-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Prior to this patch, make scripts tested for CLANG with ifeq ($(CC),
clang), failing to detect CLANG binaries with different names. Fix it by
testing for the existence of __clang__ macro in the list of compiler
defined macros.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow user to define flex and bison binary names by passing FLEX and
BISON variables.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's no big value on displaying counts for every event ID, which is
one per every CPU. Rather than that, displaying the whole sum for the
event.
$ perf record -c 100000 -e cycles:u -s test
$ perf report -T
Before:
# PID TID cycles:u cycles:u cycles:u cycles:u ... [20 more columns of 'cycles:u']
3339 3339 0 0 0 0
3340 3340 0 0 0 0
3341 3341 0 0 0 0
3342 3342 0 0 0 0
Now:
# PID TID cycles:u
3339 3339 19678
3340 3340 18744
3341 3341 17335
3342 3342 26414
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need to make sure the array of value pointers are zero initialized,
because we use them in realloc later on and uninitialized non zero value
will cause allocation error and aborted execution.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Bailing out in case the allocation failed, not the other way round.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We are taking wrong index (+1) for first thread, which leaves thread
with index 0 unused and uninitialized.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding dump_read function to gather all the dump output of read
function. Adding output of enabled and running times and id if enabled
(3 new lines with '...' prefix below).
$ perf record -s ...
$ perf report -D
958358311769 0x91f8 [0x40]: PERF_RECORD_READ: 3339 3339 cycles:u 0
... time enabled : 958358313731
... time running : 958358313731
... id : 80
Committer note:
Do not use 'read' as a variable name as it breaks the build on older
systems, such as RHEL6:
CC /tmp/build/perf/util/session.o
cc1: warnings being treated as errors
util/session.c: In function 'dump_read':
util/session.c:1132: error: declaration of 'read' shadows a global declaration
/usr/include/bits/unistd.h:35: error: shadowed declaration is here
mv: cannot stat `/tmp/build/perf/util/.session.o.tmp': No such file or directory
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The value passed into the perf.data file for the CONFIGR register in ETMv4
was incorrectly being set to the command line options/ETMv3 value.
Adds bit definitions and function to remap this value to the correct ETMv4
CONFIGR bit values for all selected options.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set read_format for what we expect to get from read event generated by
perf_event_attr::inherit_stat.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Skylake introduced new mem_remote bit in union perf_mem_data_src [1].
It applies to any other memory level to express Remote unknown level, as
is reported by Skylake.
Adding this extra check to c2c_decode_stats to properly decode remote
HITMs on Skylake.
[1] http://lkml.kernel.org/r/20170816222156.19953-4-andi@firstfloor.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824085732.28481-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We can't pass --dynamic-list list into static build anymore, because
compilers starts to scream about that. Fedora 26 started to fail build
with following error:
$ make LDFLAGS=-static
...
/usr/bin/ld: dynamic STT_GNU_IFUNC symbol `strcmp' with pointer equality in `/usr/lib/gcc/x86_64-redhat-linux/7/../../../../lib64/libc.a(strcmp.o
+)' can not be used when making an executable; recompile with -fPIE and relink with -pie
There's no sense for --dynamic-list in static build, because there's no
.dynsym table in static binary. Consequently the traceevent plugins have
never worked with static build, but it was quietly passed by.
To fix this in future I think we should add support to compile plugins
within the perf binary directly for static build.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-jeg6a7ff9j9hlqn8k4gllzvv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As defined in tools/perf/util/pmu.c, the EVENT_SOURCE_DEVICE_PATH is
/sys/bus/event_source/devices/ (no traling 's' in event_source)
This patch corrects the path in the perf stat documentation
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jack Henschel <jackdev@mailbox.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Link: http://lkml.kernel.org/r/20170824132022.10934-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
* libunwind-x86_64 must be linked before libunwind
* libunwind requires liblzma
* static libunwind conflicts with static libgcc_eh
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/150322917247.129799.14247751517961953155.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix feature test for static libdw: link required dependencies. Backends
of libebl are not statically linked thus libdl is required.
In Debian/Ubuntu libdw-dev includes libebl.a starting from 0.166-1.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/150322916720.129772.7959925864494283854.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix misprint CAP_IOC_LOCK -> CAP_IPC_LOCK. This capability have nothing
to do with raw tracepoints. This part is about bypassing mlock limits.
Sysctl kernel.perf_event_paranoid = -1 allows raw and ftrace function
tracepoints without CAP_SYS_ADMIN.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/150322916080.129746.11285255474738558340.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Target install-man builds them but forget to install.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: af3df2cf17f5 ("perf tools: Try to build Documentation when installing")
Link: http://lkml.kernel.org/r/150322915300.129715.13645857235229756834.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add some simple tests to perf test to test data source printing.
v2: Make the tests actually checked for the correct name of Forward
v3: Adjust to new encoding
Committer notes:
Avoid the in place declaration to make this build with older compilers,
for instance, in Debian 7 we get:
tests/mem.c: In function 'test__mem':
tests/mem.c:30:5: error: missing initializer [-Werror=missing-field-initializers]
tests/mem.c:30:5: error: (near initialization for '(anonymous).<anonymous>.mem_snoop') [-Werror=missing-field-initializers]
So just zero a struct, then go on building the unions as needed,
reusing settings from the previous test, i.e. local -> remote, etc.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816222156.19953-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add decoding for the new "lvlx" and "snoopx" meminfo fields added
earlier to the kernel so that "perf mem report" and other tools can
print it properly.
v2: Merge with persistent memory patch.
Switch to new bit encoding for each combination.
v3: Switch to generic lvlnum field.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816222156.19953-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add JSON uncore events for Skylake Server to perf.
Based on JSON list V1.01
This is a much fuller list than with earlier uncores, including
more low level (but also harder to understand) events. It does not
include the "experimential" events. The previous
high level metric (LLC_* etc.) are still available when applicable.
C state power events are not included at this point.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20170816220553.GA19463@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Based on JSON list version v1.01
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/3269ae458a883139110ec82bc895423bd8843d65
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avoid adding redundant events while parsing an expression. When we add
an "other" event check first if it already exists.
v2: Fix perf test failure.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-10-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some of the upcoming metrics need more than 8 events. Increase the maximum
number the parser supports.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-9-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Michal Hocko
Ingo Molnar
Linus Torvalds
Milian Wolff
Taeung Song
Jiri Olsa
Arnaldo Carvalho de Melo
Kan Liang
Sukadev Bhattiprolu
Jack Henschel
Ravi Bangoria
Jin Yao
Li Bin
David Carrillo-Cisneros
Mike Leach
Konstantin Khlebnikov
Andi Kleen