aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-41/+72
Two trivial overlapping changes conflicts in MPLS and mlx5. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25lib, traceevent: add PRINT_HEX_STR variantDaniel Borkmann2-0/+2
Add support for the __print_hex_str() macro that was added for tracing, so that user space tools such as perf can understand it as well. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17Merge tag 'perf-urgent-for-mingo-4.10-20170117' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgentIngo Molnar3-41/+72
Pull 'perf probe' fixes from Arnaldo Carvalho de Melo <acme@redhat.com> - Show correct locations for 'perf probe' on modules (Masami Hiramatsu) - Correctly handle 'perf probe's on GCC generated functions in modules (Masami Hiramatsu) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-16perf probe: Fix to probe on gcc generated functions in modulesMasami Hiramatsu3-18/+37
Fix to probe on gcc generated functions on modules. Since probing on a module is based on its symbol name, it should be adjusted on actual symbols. E.g. without this fix, perf probe shows probe definition on non-exist symbol as below. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range* in_range.isra.12 $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range+0 With this fix, perf probe correctly shows a probe on gcc-generated symbol. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range.isra.12+0 This also fixes same problem on online module as below. $ perf probe -m i915 -D assert_plane p:probe/assert_plane i915:assert_plane.constprop.134+0 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf probe: Add error checks to offline probe post-processingMasami Hiramatsu1-17/+33
Add error check codes on post processing and improve it for offline probe events as: - post processing fails if no matched symbol found in map(-ENOENT) or strdup() failed(-ENOMEM). - Even if the symbol name is the same, it updates symbol address and offset. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf probe: Fix to show correct locations for events on modulesMasami Hiramatsu1-7/+3
Fix to show correct locations for events on modules by relocating given address instead of retrying after failure. This happens when the module text size is big enough, bigger than sh_addr, because the original code retries with given address + sh_addr if it failed to find CU DIE at the given address. Any address smaller than sh_addr always fails and it retries with the correct address, but addresses bigger than sh_addr will get a CU DIE which is on the given address (not adjusted by sh_addr). In my environment(x86-64), the sh_addr of ".text" section is 0x10030. Since i915 is a huge kernel module, we can see this issue as below. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1 ffffffffc0270000 t i915_switcheroo_can_switch [i915] ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check symbols cross this boundary. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\ | head -n 2 ffffffffc027ff80 t haswell_init_clock_gating [i915] ffffffffc0280110 t valleyview_init_clock_gating [i915] So setup probes on both function and see what happen. $ sudo ./perf probe -m i915 -a haswell_init_clock_gating \ -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915) As you can see, haswell_init_clock_gating is correctly shown, but valleyview_init_clock_gating is not. With this patch, both events are shown correctly. $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) Committer notes: In my case: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915) probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915) # # readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name' [Nr] Name Type Address Off Size ES Flg Lk Inf Al [ 1] .text PROGBITS ffffffff81000000 200000 822fd3 00 AX 0 0 4096 # So both are b0rked, now with the fix: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) # Both looks correct. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-15Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds6-43/+97
Pull perf fixes from Ingo Molnar: "Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU driver fixes, plus miscellanous tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Reject non sampling events with precise_ip perf/x86/intel: Account interrupts for PEBS errors perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race perf/core: Fix sys_perf_event_open() vs. hotplug perf/x86/intel: Use ULL constant to prevent undefined shift behaviour perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code perf/x86: Set pmu->module in Intel PMU modules perf probe: Fix to probe on gcc generated symbols for offline kernel perf probe: Fix --funcs to show correct symbols for offline module perf symbols: Robustify reading of build-id from sysfs perf tools: Install tools/lib/traceevent plugins with install-bin tools lib traceevent: Fix prev/next_prio for deadline tasks perf record: Fix --switch-output documentation and comment perf record: Make __record_options static tools lib subcmd: Add OPT_STRING_OPTARG_SET option perf probe: Fix to get correct modname from elf header samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include samples/bpf sock_example: Avoid getting ethhdr from two includes perf sched timehist: Show total scheduling time
2017-01-10mm: get rid of __GFP_OTHER_NODEMichal Hocko1-1/+0
The flag was introduced by commit 78afd5612deb ("mm: add __GFP_OTHER_NODE flag") to allow proper accounting of remote node allocations done by kernel daemons on behalf of a process - e.g. khugepaged. After "mm: fix remote numa hits statistics" we do not need and actually use the flag so we can safely remove it because all allocations which are satisfied from their "home" node are accounted properly. [mhocko@suse.com: fix build] Link: http://lkml.kernel.org/r/20170106122225.GK5556@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20170102153057.9451-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-05Merge tag 'perf-urgent-for-mingo-4.10-20170104' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgentIngo Molnar6-43/+97
Pull perf/urgent fixes and one improvement from Arnaldo Carvalho de Melo: Fixes: - Fix prev/next_prio formatting for deadline tasks in libtraceevent (Daniel Bristot de Oliveira) - Robustify reading of build-ids from /sys/kernel/note (Arnaldo Carvalho de Melo) - Fix building some sample/bpf in Alpine Linux 3.4 (Arnaldo Carvalho de Melo) - Fix 'make install-bin' to install libtraceevent plugins (Arnaldo Carvalho de Melo) - Fix 'perf record --switch-output' documentation and comment (Jiri Olsa) - Fix 'perf probe' for cross arch probing (Masami Hiramatsu) Improvement: - Show total scheduling time in 'perf sched timehist' (Namhyumg Kim) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-04perf probe: Fix to probe on gcc generated symbols for offline kernelMasami Hiramatsu1-1/+47
Fix perf-probe to show probe definition on gcc generated symbols for offline kernel (including cross-arch kernel image). gcc sometimes optimizes functions and generate new symbols with suffixes such as ".constprop.N" or ".isra.N" etc. Since those symbol names are not recorded in DWARF, we have to find correct generated symbols from offline ELF binary to probe on it (kallsyms doesn't correct it). For online kernel or uprobes we don't need it because those are rebased on _text, or a section relative address. E.g. Without this: $ perf probe -k build-arm/vmlinux -F __slab_alloc* __slab_alloc.constprop.9 $ perf probe -k build-arm/vmlinux -D __slab_alloc p:probe/__slab_alloc __slab_alloc+0 If you put above definition on target machine, it should fail because there is no __slab_alloc in kallsyms. With this fix, perf probe shows correct probe definition on __slab_alloc.constprop.9: $ perf probe -k build-arm/vmlinux -D __slab_alloc p:probe/__slab_alloc __slab_alloc.constprop.9+0 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148350060434.19001.11864836288580083501.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-04perf probe: Fix --funcs to show correct symbols for offline moduleMasami Hiramatsu1-19/+6
Fix --funcs (-F) option to show correct symbols for offline module. Since previous perf-probe uses machine__findnew_module_map() for offline module, even if user passes a module file (with full path) which is for other architecture, perf-probe always tries to load symbol map for current kernel module. This fix uses dso__new_map() to load the map from given binary as same as a map for user applications. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148350053478.19001.15435255244512631545.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03perf symbols: Robustify reading of build-id from sysfsArnaldo Carvalho de Melo1-0/+6
Markus reported that perf segfaults when reading /sys/kernel/notes from a kernel linked with GNU gold, due to what looks like a gold bug, so do some bounds checking to avoid crashing in that case. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Report-Link: http://lkml.kernel.org/r/20161219161821.GA294@x4 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ryhgs6a6jxvz207j2636w31c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03perf tools: Install tools/lib/traceevent plugins with install-binArnaldo Carvalho de Melo1-2/+2
Those are binaries as well, so should be installed by: make -C tools/perf install-bin' too. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-3841b37u05evxrs1igkyu6ks@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03perf record: Fix --switch-output documentation and commentJiri Olsa2-1/+5
There's no --signal-trigger option, also adding the code comment into record man page. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Wang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1483431600-19887-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03perf record: Make __record_options staticJiri Olsa1-1/+1
There's no need for this one to be global. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Wang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1483431600-19887-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-02perf probe: Fix to get correct modname from elf headerMasami Hiramatsu1-16/+16
Since 'perf probe' supports cross-arch probes, it is possible to analyze different arch kernel image which has different bits-per-long. In that case, it fails to get the module name because it uses the MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead of the target arch bits-per-long. This fixes above issue by changing modname-offset based on the target archs bit width. This is ok because linux kernel uses LP64 model on 64bit arch. E.g. without this (on x86_64, and target module is arm32): $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup p:probe/configfs_lookup :configfs_lookup+0 ^-Here is an empty module name. With this fix, you can see correct module name: $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup p:probe/configfs_lookup configfs:configfs_lookup+0 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148337043836.6752.383495516397005695.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-27perf sched timehist: Show total scheduling timeNamhyung Kim1-3/+14
Show length of analyzed sample time and rate of idle task running. This also takes care of time range given by --time option. $ perf sched timehist -sI | tail Samples do not have callchains. Idle stats: CPU 0 idle for 930.316 msec ( 92.93%) CPU 1 idle for 963.614 msec ( 96.25%) CPU 2 idle for 885.482 msec ( 88.45%) CPU 3 idle for 938.635 msec ( 93.76%) Total number of unique tasks: 118 Total number of context switches: 2337 Total run time (msec): 3718.048 Total scheduling time (msec): 1001.131 (x 4) Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-23Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds23-169/+466
Pull perf fixes from Ingo Molnar: "On the kernel side there's two x86 PMU driver fixes and a uprobes fix, plus on the tooling side there's a number of fixes and some late updates" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf sched timehist: Fix invalid period calculation perf sched timehist: Remove hardcoded 'comm_width' check at print_summary perf sched timehist: Enlarge default 'comm_width' perf sched timehist: Honour 'comm_width' when aligning the headers perf/x86: Fix overlap counter scheduling bug perf/x86/pebs: Fix handling of PEBS buffer overflows samples/bpf: Move open_raw_sock to separate header samples/bpf: Remove perf_event_open() declaration samples/bpf: Be consistent with bpf_load_program bpf_insn parameter tools lib bpf: Add bpf_prog_{attach,detach} samples/bpf: Switch over to libbpf perf diff: Do not overwrite valid build id perf annotate: Don't throw error for zero length symbols perf bench futex: Fix lock-pi help string perf trace: Check if MAP_32BIT is defined (again) samples/bpf: Make perf_event_read() static uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation samples/bpf: Make samples more libbpf-centric tools lib bpf: Add flags to bpf_create_map() tools lib bpf: use __u32 from linux/types.h ...
2016-12-22perf sched timehist: Fix invalid period calculationNamhyung Kim1-1/+1
When --time option is given with a value outside recorded time, the last sample time (tprev) was set to that value and run time calculation might be incorrect. This is a problem of the first samples for each cpus since it would skip the runtime update when tprev is 0. But with --time option it had non-zero (which is invalid) value so the calculation is also incorrect. For example, let's see the followging: $ perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 3195.968367 [0003] <idle> 0.000 0.000 0.000 3195.968386 [0002] Timer[4306/4277] 0.000 0.000 0.018 3195.968397 [0002] Web Content[4277] 0.000 0.000 0.000 3195.968595 [0001] JS Helper[4302/4277] 0.000 0.000 0.000 3195.969217 [0000] <idle> 0.000 0.000 0.621 3195.969251 [0001] kworker/1:1H[291] 0.000 0.000 0.033 The sample starts at 3195.968367 but when I gave a time interval from 3194 to 3196 (in sec) it will calculate the whole 2 second as runtime. In below, 2 cpus accounted it as runtime, other 2 cpus accounted it as idle time. Before: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 1995.991 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 1999.852 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 3724.940 After: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 10.811 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 18.337 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 18.139 Committer notes: Further testing: Before: Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 937.944 msec CPU 2 idle for 188.931 msec CPU 3 idle for 986.185 msec After: # perf sched timehist --time 40602,40603 -s | tail Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 175.407 msec CPU 2 idle for 188.931 msec CPU 3 idle for 223.657 msec Total number of unique tasks: 68 Total number of context switches: 814 Total run time (msec): 97.688 # for cpu in `seq 0 3` ; do echo -n "CPU $cpu idle for " ; perf sched timehist --time 40602,40603 | grep "\[000${cpu}\].*\<idle\>" | tr -s ' ' | cut -d' ' -f7 | awk '{entries++ ; s+=$1} END {print s " msec (entries: " entries ")"}' ; done CPU 0 idle for 229.721 msec (entries: 123) CPU 1 idle for 175.381 msec (entries: 65) CPU 2 idle for 188.903 msec (entries: 56) CPU 3 idle for 223.61 msec (entries: 102) Difference due to the idle stats being accounted at nanoseconds precision while the <idle> entries in 'perf sched timehist' are trucated at msec.usec. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 853b74071110 ("perf sched timehist: Add option to specify time window of interest") Link: http://lkml.kernel.org/r/20161222060350.17655-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Remove hardcoded 'comm_width' check at print_summaryNamhyung Kim1-3/+0
Now that the default 'comm_width' value is 30, no need to check that at print_summary, Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Enlarge default 'comm_width'Namhyung Kim1-1/+1
Current default value is 20 but it's easily changed to a bigger value as task has a long name and different tid and pid. And it makes the output not aligned. So change it to have a large value as summary shows. Committer notes: Before: # perf sched record ^C # perf sched timehist <SNIP> 40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020 40602.771512 [0003] <idle> 0.003 0.000 0.986 40602.771586 [0001] <idle> 0.020 0.000 1.049 40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020 40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116 40602.771776 [0000] <idle> 0.001 0.000 1.892 <SNIP> After: # perf sched timehist <SNIP> 40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020 40602.771512 [0003] <idle> 0.003 0.000 0.986 40602.771586 [0001] <idle> 0.020 0.000 1.049 40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020 40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116 <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Honour 'comm_width' when aligning the headersNamhyung Kim1-3/+4
Current default value is 20, but that may change in the future, so make places where we have 20 hardcoded use 'comm_width'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf diff: Do not overwrite valid build idKan Liang1-1/+2
Fixes a perf diff regression issue which was introduced by commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") The binary name could be same when perf diff different binaries. Build id is used to distinguish between them. However, the previous patch assumes the same binary name has same build id. So it overwrites the build id according to the binary name, regardless of whether the build id is set or not. Check the has_build_id in dso__load. If the build id is already set, use it. Before the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% -99.80% tchain_edit [.] f2 0.12% +99.81% tchain_edit [.] f3 0.02% -0.01% [ixgbe] [k] ixgbe_read_reg After the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% +0.10% tchain_edit [.] f3 0.12% -0.08% tchain_edit [.] f2 Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> CC: Dima Kogan <dima@secretsauce.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf annotate: Don't throw error for zero length symbolsRavi Bangoria1-1/+2
'perf report --tui' exits with error when it finds a sample of zero length symbol (i.e. addr == sym->start == sym->end). Actually these are valid samples. Don't exit TUI and show report with such symbols. Reported-and-Tested-by: Anton Blanchard <anton@samba.org> Link: https://lkml.org/lkml/2016/10/8/189 Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Riyder <chris.ryder@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@kernel.org # v4.9+ Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf bench futex: Fix lock-pi help stringDavidlohr Bueso1-1/+1
Obvious copy/paste typo from the requeue program. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dbueso@suse.de> Link: http://lkml.kernel.org/r/1481830584-30909-1-git-send-email-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf trace: Check if MAP_32BIT is defined (again)Jiri Olsa1-0/+2
There might be systems where MAP_32BIT is not defined, like some some RHEL7 powerpc versions. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Kyle McMartin <kyle@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 256763b01741 ("perf trace beauty mmap: Add more conditional defines") Link: http://lkml.kernel.org/r/1481831814-23683-1-git-send-email-jolsa@kernel.org [ Changed the Fixme cset to the one removing the conditional switch case for MAP_32BIT ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-17Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds2-2/+2
Pull kbuild updates from Michal Marek: - prototypes for x86 asm-exported symbols (Adam Borowski) and a warning about missing CRCs (Nick Piggin) - asm-exports fix for LTO (Nicolas Pitre) - thin archives improvements (Nick Piggin) - linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick Piggin) - genksyms support for __builtin_va_list keyword - misc minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: enable modversions for symbols exported from asm kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case scripts/kallsyms: remove last remnants of --page-offset option make use of make variable CURDIR instead of calling pwd kbuild: cmd_export_list: tighten the sed script kbuild: minor improvement for thin archives build kbuild: modpost warn if export version crc is missing kbuild: keep data tables through dead code elimination kbuild: improve linker compatibility with lib-ksyms.o build genksyms: Regenerate parser kbuild/genksyms: handle va_list type kbuild: thin archives for multi-y targets kbuild: kallsyms allow 3-pass generation if symbols size has changed
2016-12-15perf annotate: Fix jump target outside of function address rangeRavi Bangoria3-9/+15
If jump target is outside of function range, perf is not handling it correctly. Especially when target address is lesser than function start address, target offset will be negative. But, target address declared to be unsigned, converts negative number into 2's complement. See below example. Here target of 'jumpq' instruction at 34cf8 is 34ac0 which is lesser than function start address(34cf0). 34ac0 - 34cf0 = -0x230 = 0xfffffffffffffdd0 Objdump output: 0000000000034cf0 <__sigaction>: __GI___sigaction(): 34cf0: lea -0x20(%rdi),%eax 34cf3: cmp -bashx1,%eax 34cf6: jbe 34d00 <__sigaction+0x10> 34cf8: jmpq 34ac0 <__GI___libc_sigaction> 34cfd: nopl (%rax) 34d00: mov 0x386161(%rip),%rax # 3bae68 <_DYNAMIC+0x2e8> 34d07: movl -bashx16,%fs:(%rax) 34d0e: mov -bashxffffffff,%eax 34d13: retq perf annotate before applying patch: __GI___sigaction /usr/lib64/libc-2.22.so lea -0x20(%rdi),%eax cmp -bashx1,%eax v jbe 10 v jmpq fffffffffffffdd0 nop 10: mov _DYNAMIC+0x2e8,%rax movl -bashx16,%fs:(%rax) mov -bashxffffffff,%eax retq perf annotate after applying patch: __GI___sigaction /usr/lib64/libc-2.22.so lea -0x20(%rdi),%eax cmp -bashx1,%eax v jbe 10 ^ jmpq 34ac0 <__GI___libc_sigaction> nop 10: mov _DYNAMIC+0x2e8,%rax movl -bashx16,%fs:(%rax) mov -bashxffffffff,%eax retq Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Riyder <chris.ryder@arm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1480953407-7605-3-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf annotate: Support jump instruction with target as second operandRavi Bangoria1-1/+5
Architectures like PowerPC have jump instructions that includes a target address as a second operand. For example, 'bne cr7,0xc0000000000f6154'. Add support for such instruction in perf annotate. objdump o/p: c0000000000f6140: ld r9,1032(r31) c0000000000f6144: cmpdi cr7,r9,0 c0000000000f6148: bne cr7,0xc0000000000f6154 c0000000000f614c: ld r9,2312(r30) c0000000000f6150: std r9,1032(r31) c0000000000f6154: ld r9,88(r31) Corresponding perf annotate o/p: Before patch: ld r9,1032(r31) cmpdi cr7,r9,0 v bne 3ffffffffff09f2c ld r9,2312(r30) std r9,1032(r31) 74: ld r9,88(r31) After patch: ld r9,1032(r31) cmpdi cr7,r9,0 v bne 74 ld r9,2312(r30) std r9,1032(r31) 74: ld r9,88(r31) Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Riyder <chris.ryder@arm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1480953407-7605-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf record: Force ignore_missing_thread for uid optionJiri Olsa1-0/+3
Enable perf_evsel::ignore_missing_thread for -u option to ignore complete failure if any of the user's processes die between its enumeration and time we open the event. Committer notes: While doing a 'make -j4 allmodconfig' we sometimes get into the race: Before: # perf record -u acme Error: The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:ppp). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? # After: [root@jouet ~]# perf record -u acme WARNING: Ignored open failure for pid 9888 WARNING: Ignored open failure for pid 18059 [root@jouet ~]# Which is an improvement, with the races not preventing the remaining threads for the specified user from being monitored, but the message probably needs further clarification. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf evsel: Allow to ignore missing pidJiri Olsa3-0/+46
Adding perf_evsel::ignore_missing_cpu_thread bool. When set true, it allows perf to ignore error of missing pid of perf event syscall. We remove missing thread id from the thread_map, so the rest of the processing like ioctl and mmap won't get disturbed with -1 fd. The reason for supporting this is to ease up monitoring group of pids, that 'disappear' before perf opens their event. This currently leads perf to report error and exit and makes perf record's -u option unusable under certain setup. With this change we will allow this race and ignore such failure with following warning: WARNING: Ignored open failure for pid 8605 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161213074622.GA3084@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf thread_map: Add thread_map__remove functionJiri Olsa5-0/+72
Add thread_map__remove function to remove thread from thread map. Add automated test also. Committer notes: Testing it: # perf test "Remove thread map" 39: Remove thread map : Ok # perf test -v "Remove thread map" 39: Remove thread map : --- start --- test child forked, pid 4483 2 threads: 4482, 4483 1 thread: 4483 0 thread: test child finished with 0 ---- end ---- Remove thread map: Ok # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-4-git-send-email-jolsa@kernel.org [ Added stdlib.h, to get the free() declaration ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf evsel: Use variable instead of repeating lengthy FD macroJiri Olsa1-8/+9
It's more readable and will ease up following patches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf mem: Fix --all-user/--all-kernel optionsJiri Olsa1-2/+2
Removing extra '--' prefix. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: ad16511b0e40 ("perf mem: Add -U/-K (--all-user/--all-kernel) options") Link: http://lkml.kernel.org/r/1481538943-21874-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf tools: Remove some needless __maybe_unusedArnaldo Carvalho de Melo3-11/+10
I.e. those parameters/functions _are_ used, so ditch that misleading attribute. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-13cqtjh0yojg5gzvpq1zzpl0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Show callchains for idle statNamhyung Kim1-0/+86
When --idle-hist option is used with --summary, it now shows idle stats with callchains like below: Idle stats by callchain: CPU 0: 902.195 msec Idle time (msec) Count Callchains ---------------- ------- -------------------------------------------------- 370.589 69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 178.799 17 worker_thread <- kthread <- ret_from_fork 128.352 17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 125.111 19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 71.599 50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 23.146 1 rcu_gp_kthread <- kthread <- ret_from_fork 4.510 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 0.085 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll ... Committer notes: Extra testing: # uname -a Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux 1) Run 'perf sched record -g' 2) Run 'perf sched timehist --idle --summary' <SNIP> Idle stats by callchain: CPU 0: 13456.840 msec Idle time (msec) Count Callchains ---------------- ----- -------------------------------------------------- 5386.637 3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 2750.238 2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64 1275.672 1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath 936.322 452 worker_thread <- kthread <- ret_from_fork 741.311 385 rcu_nocb_kthread <- kthread <- ret_from_fork 729.385 248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll 365.386 229 irq_thread <- kthread <- ret_from_fork 338.934 265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 219.488 201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 186.839 410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 142.541 59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl 83.887 92 smpboot_thread_fn <- kthread <- ret_from_fork 62.722 96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath 47.894 83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read 46.554 61 rcu_gp_kthread <- kthread <- ret_from_fork 34.337 21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread 29.521 14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 20.274 10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit 15.085 55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Add -I/--idle-hist optionNamhyung Kim2-5/+45
The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Skip non-idle events when necessaryNamhyung Kim1-7/+18
Sometimes it only focuses on idle-related events like upcoming idle-hist feature. In this case we don't want to see other event to reduce noise. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Save callchain when entering idleNamhyung Kim1-0/+30
In order to investigate the idleness reason, it is necessary to keep the callchains when entering idle. This can be identified by the sched:sched_switch event having the next_pid field as 0. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-4-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-1-namhyung@kernel.org [ Merged fix from Namhyung, see second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Introduce struct idle_time_dataNamhyung Kim1-4/+33
The struct idle_time_data is to keep idle stats with callchains entering to the idle task. The normal thread_runtime calculation is done transparently since it extends the struct thread_runtime. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-3-namhyung@kernel.org [ Align struct field names ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Split is_idle_sample()Namhyung Kim1-19/+20
The is_idle_sample() function actually does more than determining whether sample come from idle task. Split the callchain part into save_task_callchain() to make it clearer. Also checking prev_pid from trace data looks preferred than just checking sample->pid since it's possible, although rare, to have invalid 0 pid/tid on scheduling an exiting task. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-2-namhyung@kernel.org [ Remove some needless () in some return statements ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf tools: Move headers check into bash scriptJiri Olsa2-93/+60
To make it nicer and easily maintainable. Also moving the check into fixdep sub make, so its output is not scattered around the build output. Removing extra $$ from mman*.h checks. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-5-git-send-email-jolsa@kernel.org [ Use /bin/sh, and 'function check() {' -> 'check () {' to make it work with busybox, in Alpine Linux, for instance ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-11make use of make variable CURDIR instead of calling pwdUwe Kleine-König2-2/+2
make already provides the current working directory in a variable, so make use of it instead of forking a shell. Also replace usage of PWD by CURDIR. PWD is provided by most shells, but not all, so this makes the build system more robust. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-07perf tools: Explicitly document that --children is enabled by defaultYannick Brosseau2-1/+3
The fact that the --children option is enabled by default is buried deep at the end of the help page, in the overhead calculation section. This make it explicit right where the option is listed, following the same way other default options are described Signed-off-by: Yannick Brosseau <scientist@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20161202160732.29058-1-scientist@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf sched timehist: Cleanup idle_max_cpu handlingNamhyung Kim1-5/+4
It treats the idle_max_cpu little bit confusingly IMHO. Let's make it more straight forward. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf sched timehist: Handle zero sample->tid properlyNamhyung Kim1-1/+3
Sometimes samples have tid of 0 but non-0 pid. It ends up having a new thread of 0 tid/pid (instead of referring idle task) since tid is used to search matching task. But I guess it's wrong to use 0 as a tid when pid is set. This patch uses tid only if it has a non-zero value or same as pid (of 0). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf callchain: Introduce callchain_cursor__copy()Namhyung Kim2-0/+30
The callchain_cursor__copy() function is to save current callchain captured by a cursor. It'll be used to keep callchains when switching to idle task for each cpu. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf sched: Cleanup option processingNamhyung Kim1-5/+2
The -D/--dump-raw-trace option is in the parent option so no need to repeat it. Also move -f/--force option to parent as it's common to handle data file. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf sched timehist: Improve error message when analyzing wrong fileDavid Ahern1-1/+5
Arnaldo reported an unhelpful error message when running perf sched timehist on a file that did not contain sched tracepoints: [root@jouet ~]# perf sched timehist No trace sample to read. Did you call 'perf record -R'? [root@jouet ~]# perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 Change the has_traces check to look for the sched_switch event. Analysis for perf sched timehist requires at least this event. Now when analyzing a file without sched tracepoints you get: root@f21-vbox:/tmp$ perf sched timehist No sched_switch events found. Have you run 'perf sched record'? Signed-off-by: David Ahern <dsahern@gmail.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480451988-43673-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06perf tools: Move perf build related variables under non fixdep legJiri Olsa1-5/+5
Because there's no need for them in fixdep build. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>