aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-07-18perf sched: Fix record failure when CONFIG_SCHEDSTATS is not setYang Jihong1-4/+29
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events. As a result, the command fails. Before: #perf sched record sleep 1 event syntax error: 'sched:sched_stat_wait' \___ unknown tracepoint Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Solution: Check whether schedstat tracepoints are exposed. If no, these events are not recorded. After: # perf sched record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ] # perf sched report run measurement overhead: 4736 nsecs sleep measurement overhead: 9059979 nsecs the run test took 999854 nsecs the sleep test took 8945271 nsecs nr_run_events: 716 nr_sleep_events: 785 nr_wakeup_events: 0 ... ------------------------------------------------------------ Fixes: 2a09b5de235a6 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernelYang Jihong6-42/+38
The "address" member of "struct probe_trace_point" uses long data type. If kernel is 64-bit and perf program is 32-bit, size of "address" variable is 32 bits. As a result, upper 32 bits of address read from kernel are truncated, an error occurs during address comparison in kprobe_warn_out_range(). Before: # perf probe -a schedule schedule is out of .text, skip it. Error: Failed to add events. Solution: Change data type of "address" variable to u64 and change corresponding address printing and value assignment. After: # perf.new.new probe -a schedule Added new event: probe:schedule (on schedule) You can now use it in all perf tools, such as: perf record -e probe:schedule -aR sleep 1 # perf probe -l probe:schedule (on schedule@kernel/sched/core.c) # perf record -e probe:schedule -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ] # perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1K of event 'probe:schedule' # Event count (approx.): 1366 # # Overhead Command Shared Object Symbol # ........ ............... ................. ............ # 6.22% migration/0 [kernel.kallsyms] [k] schedule 6.22% migration/1 [kernel.kallsyms] [k] schedule 6.22% migration/2 [kernel.kallsyms] [k] schedule 6.22% migration/3 [kernel.kallsyms] [k] schedule 6.15% migration/10 [kernel.kallsyms] [k] schedule 6.15% migration/11 [kernel.kallsyms] [k] schedule 6.15% migration/12 [kernel.kallsyms] [k] schedule 6.15% migration/13 [kernel.kallsyms] [k] schedule 6.15% migration/14 [kernel.kallsyms] [k] schedule 6.15% migration/15 [kernel.kallsyms] [k] schedule 6.15% migration/4 [kernel.kallsyms] [k] schedule 6.15% migration/5 [kernel.kallsyms] [k] schedule 6.15% migration/6 [kernel.kallsyms] [k] schedule 6.15% migration/7 [kernel.kallsyms] [k] schedule 6.15% migration/8 [kernel.kallsyms] [k] schedule 6.15% migration/9 [kernel.kallsyms] [k] schedule 0.22% rcu_sched [kernel.kallsyms] [k] schedule ... # # (Cannot load tips.txt file, please install perf!) # Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jianlin Lv <jianlin.lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf data: Close all files in close_dir()Riccardo Mancini1-1/+1
When using 'perf report' in directory mode, the first file is not closed on exit, causing a memory leak. The problem is caused by the iterating variable never reaching 0. Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhen Lei <thunder.leizhen@huawei.com> Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf probe-file: Delete namelist in del_events() on the error pathRiccardo Mancini1-2/+2
ASan reports some memory leaks when running: # perf test "42: BPF filter" This second leak is caused by a strlist not being dellocated on error inside probe_file__del_events. This patch adds a goto label before the deallocation and makes the error path jump to it. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-16perf test bpf: Free obj_bufRiccardo Mancini1-0/+2
ASan reports some memory leaks when running: # perf test "42: BPF filter" The first of these leaks is caused by obj_buf never being deallocated in __test__bpf. This patch adds the missing free. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/60f3ca935fe6672e7e866276ce6264c9e26e4c87.1626343282.git.rickyman7@gmail.com [ Added missing stdlib.h include ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf trace: Free strings in trace__parse_events_option()Riccardo Mancini1-0/+3
ASan reports several memory leaks running: # perf test "88: Check open filename arg using perf trace + vfs_getname" The fourth of these leaks is related to some strings never being freed in trace__parse_events_option. This patch adds the missing frees. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/34d08535b11124106b859790549991abff5a7de8.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf trace: Free syscall tp fields in evsel->privRiccardo Mancini1-1/+16
ASan reports several memory leaks running: # perf test "88: Check open filename arg using perf trace + vfs_getname" The third of these leaks is related to evsel->priv fields of sycalls never being deallocated. This patch adds the function evlist__free_syscall_tp_fields which iterates over all evsels in evlist, matching syscalls, and calling the missing frees. This new function is called at the end of trace__run, right before calling evlist__delete. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/46526611904ec5ff2768b59014e3afce8e0197d1.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf trace: Free syscall->arg_fmtRiccardo Mancini1-1/+15
ASan reports several memory leaks running: # perf test "88: Check open filename arg using perf trace + vfs_getname" The second of these leaks is caused by the arg_fmt field of syscall not being deallocated. This patch adds a new function syscall__exit which is called on all syscalls.table entries in trace__exit, which will free the arg_fmt field. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/d68f25c043d30464ac9fa79c3399e18f429bca82.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf trace: Free malloc'd trace fields on exitRiccardo Mancini1-1/+10
ASan reports several memory leaks running: # perf test "88: Check open filename arg using perf trace + vfs_getname" The first of these leaks is related to struct trace fields never being deallocated. This patch adds the function trace__exit, which is called at the end of cmd_trace, replacing the existing deallocation, which is now moved inside the new function. This function deallocates: - ev_qualifier - ev_qualifier_ids.entries - syscalls.table - sctbl - perfconfig_events Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/de5945ed5c0cb882cbfa3268567d0bff460ff016.1626343282.git.rickyman7@gmail.com [ Removed needless initialization to zero, missing named initializers are zeroed by the compiler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf lzma: Close lzma stream on exitRiccardo Mancini1-3/+5
ASan reports memory leaks when running: # perf test "88: Check open filename arg using perf trace + vfs_getname" One of these is caused by the lzma stream never being closed inside lzma_decompress_to_file(). This patch adds the missing lzma_end(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 80a32e5b498a7547 ("perf tools: Add lzma decompression support for kernel module") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/aaf50bdce7afe996cfc06e1bbb36e4a2a9b9db93.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf script: Fix memory 'threads' and 'cpus' leaks on exitRiccardo Mancini1-0/+7
ASan reports several memory leaks while running: # perf test "82: Use vfs_getname probe to get syscall args filenames" Two of these are caused by some refcounts not being decreased on perf-script exit, namely script.threads and script.cpus. This patch adds the missing __put calls in a new perf_script__exit function, which is called at the end of cmd_script. This patch concludes the fixes of all remaining memory leaks in perf test "82: Use vfs_getname probe to get syscall args filenames". Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: cfc8874a48599249 ("perf script: Process cpu/threads maps") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/5ee73b19791c6fa9d24c4d57f4ac1a23609400d7.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf script: Release zstd dataRiccardo Mancini1-0/+1
ASan reports several memory leak while running: # perf test "82: Use vfs_getname probe to get syscall args filenames" One of the leaks is caused by zstd data not being released on exit in perf-script. This patch adds the missing zstd_fini(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: b13b04d9382113f7 ("perf script: Initialize zstd_data") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/39388e8cc2f85ca219ea18697a17b7bd8f74b693.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf session: Cleanup trace_eventRiccardo Mancini1-0/+1
ASan reports several memory leaks when running: # perf test "82: Use vfs_getname probe to get syscall args filenames" many of which are related to session->tevent. This patch will solve this problem, then next patch will fix the remaining memory leaks in 'perf script'. This bug is due to a missing deallocation of the trace_event data strutures. This patch adds the missing trace_event__cleanup() in perf_session__delete(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/fa2a3f221d90e47ce4e5b7e2d6e64c3509ddc96a.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf inject: Close inject.output on exitRiccardo Mancini1-2/+6
ASan reports a memory leak when running: # perf test "83: Zstd perf.data compression/decompression" which happens inside 'perf inject'. The bug is caused by inject.output never being closed. This patch adds the missing perf_data__close(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 6ef81c55a2b6584c ("perf session: Return error code for perf_session__new() function on failure") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/c06f682afa964687367cf6e92a64ceb49aec76a5.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf report: Free generated help strings for sort optionRiccardo Mancini3-13/+24
ASan reports the memory leak of the strings allocated by sort_help() when running perf report. This patch changes the returned pointer to char* (instead of const char*), saves it in a temporary variable, and finally deallocates it at function exit. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 702fb9b415e7c99b ("perf report: Show all sort keys in help output") Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/a38b13f02812a8a6759200b9063c6191337f44d4.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf env: Fix memory leak of cpu_pmu_capsRiccardo Mancini1-0/+1
ASan reports memory leaks while running: # perf test "83: Zstd perf.data compression/decompression" The first of the leaks is caused by env->cpu_pmu_caps not being freed. This patch adds the missing (z)free inside perf_env__exit. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 6f91ea283a1ed23e ("perf header: Support CPU PMU capabilities") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/6ba036a8220156ec1f3d6be3e5d25920f6145028.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf test maps__merge_in: Fix memory leak of mapsRiccardo Mancini1-0/+2
ASan reports a memory leak when running: # perf test "65: maps__merge_in" This is the second and final patch addressing these memory leaks. This time, the problem is simply that the maps object is never destructed. This patch adds the missing maps__exit call. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 79b6bb73f888933c ("perf maps: Merge 'struct maps' with 'struct map_groups'") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/a1a29b97a58738987d150e94d4ebfad0282fb038.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf dso: Fix memory leak in dso__new_map()Riccardo Mancini1-1/+3
ASan reports a memory leak when running: # perf test "65: maps__merge_in". The causes of the leaks are two, this patch addresses only the first one, which is related to dso__new_map(). The bug is that dso__new_map() creates a new dso but never decreases the refcount it gets from creating it. This patch adds the missing dso__put(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: d3a7c489c7fd2463 ("perf tools: Reference count struct dso") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/60bfe0cd06e89e2ca33646eb8468d7f5de2ee597.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf test event_update: Fix memory leak of unitRiccardo Mancini1-1/+3
ASan reports a memory leak while running: # perf test "49: Synthesize attr update" Caused by a string being duplicated but never freed. This patch adds the missing free(). Note that evsel->unit is not deallocated together with evsel since it is supposed to be a constant string. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: a6e5281780d1da65 ("perf tools: Add event_update event unit type") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1fbc8158663fb0d4d5392e36bae564f6ad60be3c.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf test event_update: Fix memory leak of evlistRiccardo Mancini1-1/+1
ASan reports a memory leak when running: # perf test "49: Synthesize attr update" Caused by evlist not being deleted. This patch adds the missing evlist__delete and removes the perf_cpu_map__put since it's already being deleted by evlist__delete. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: a6e5281780d1da65 ("perf tools: Add event_update event unit type") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/f7994ad63d248f7645f901132d208fadf9f2b7e4.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf test session_topology: Delete session->evlistRiccardo Mancini1-0/+1
ASan reports a memory leak related to session->evlist while running: # perf test "41: Session topology". When perf_data is in write mode, session->evlist is owned by the caller, which should also take care of deleting it. This patch adds the missing evlist__delete(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: c84974ed9fb67293 ("perf test: Add entry to test cpu topology") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/822f741f06eb25250fb60686cf30a35f447e9e91.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf env: Fix sibling_dies memory leakRiccardo Mancini1-0/+1
ASan reports a memory leak in perf_env while running: # perf test "41: Session topology" Caused by sibling_dies not being freed. This patch adds the required free. Fixes: acae8b36cded0ee6 ("perf header: Add die information in CPU topology") Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/2140d0b57656e4eb9021ca9772250c24c032924b.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf probe: Fix dso->nsinfo refcountingRiccardo Mancini1-1/+3
ASan reports a memory leak of nsinfo during the execution of: # perf test "31: Lookup mmap thread". The leak is caused by a refcounted variable being replaced without dropping the refcount. This patch makes sure that the refcnt of nsinfo is decreased whenever a refcounted variable is replaced with a new value. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 544abd44c7064c8a ("perf probe: Allow placing uprobes in alternate namespaces.") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf map: Fix dso->nsinfo refcountingRiccardo Mancini1-0/+2
ASan reports a memory leak of nsinfo during the execution of # perf test "31: Lookup mmap thread" The leak is caused by a refcounted variable being replaced without dropping the refcount. This patch makes sure that the refcnt of nsinfo is decreased whenever a refcounted variable is replaced with a new value. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: bf2e710b3cb8445c ("perf maps: Lookup maps in both intitial mountns and inner mountns.") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf inject: Fix dso->nsinfo refcountingRiccardo Mancini1-2/+3
ASan reports a memory leak of nsinfo during the execution of: # perf test "31: Lookup mmap thread" The leak is caused by a refcounted variable being replaced without dropping the refcount. This patch makes sure that the refcnt of nsinfo is decreased when a refcounted variable is replaced with a new value. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 27c9c3424fc217da ("perf inject: Add --buildid-all option") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14perf cs-etm: Split Coresight decode by aux recordsJames Clark1-1/+167
Populate the auxtrace queues using AUX records rather than whole auxtrace buffers so that the decoder is reset between each aux record. This is similar to the auxtrace_queues__process_index() -> auxtrace_queues__add_indexed_event() flow where perf_session__peek_event() is used to read AUXTRACE events out of random positions in the file based on the auxtrace index. But now we loop over all PERF_RECORD_AUX events instead of AUXTRACE buffers. For each PERF_RECORD_AUX event, we find the corresponding AUXTRACE buffer using the index, and add a fragment of that buffer to the auxtrace queues. No other changes to decoding were made, apart from populating the auxtrace queues. The result of decoding is identical to before, except in cases where decoding failed completely, due to not resetting the decoder. The reason for this change is because AUX records are emitted any time tracing is disabled, for example when the process is scheduled out. Because ETM was disabled and enabled again, the decoder also needs to be reset to force the search for a sync packet. Otherwise there would be fatal decoding errors. Testing ======= Testing was done with the following script, to diff the decoding results between the patched and un-patched versions of perf: #!/bin/bash set -ex $1 script -i $3 $4 > split.script $2 script -i $3 $4 > default.script diff split.script default.script | head -n 20 And it was run like this, with various itrace options depending on the quantity of synthesised events: compare.sh ./perf-patched ./perf-default perf-per-cpu-2-threads.data --itrace=i100000ns No changes in output were observed in the following scenarios: * Simple per-cpu perf record -e cs_etm/@tmc_etr0/u top * Per-thread, single thread perf record -e cs_etm/@tmc_etr0/u --per-thread ./threads_C * Per-thread multiple threads (but only one thread collected data): perf record -e cs_etm/@tmc_etr0/u --per-thread --pid 4596,4597 * Per-thread multiple threads (both threads collected data): perf record -e cs_etm/@tmc_etr0/u --per-thread --pid 4596,4597 * Per-cpu explicit threads: perf record -e cs_etm/@tmc_etr0/u --pid 853,854 * System-wide (per-cpu): perf record -e cs_etm/@tmc_etr0/u -a * No data collected (no aux buffers) Can happen with any command when run for a short period * Containing truncated records Can happen with any command * Containing aux records with 0 size Can happen with any command * Snapshot mode (various files with and without buffer wrap) perf record -e cs_etm/@tmc_etr0/u -a --snapshot Some differences were observed in the following scenario: * Snapshot mode (with duplicate buffers) perf record -e cs_etm/@tmc_etr0/u -a --snapshot Fewer samples are generated in snapshot mode if duplicate buffers were gathered because buffers with the same offset are now only added once. This gives different, but more correct results and no duplicate data is decoded any more. Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Branislav Rankov <branislav.rankov@arm.com> Cc: Denis Nikitin <denik@chromium.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20210624164303.28632-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14perf sched: Cast PTHREAD_STACK_MIN to int as it may turn into sysconf(__SC_THREAD_STACK_MIN_VALUE)Arnaldo Carvalho de Melo1-1/+1
In fedora rawhide the PTHREAD_STACK_MIN define may end up expanded to a sysconf() call, and that will return 'long int', breaking the build: 45 fedora:rawhide : FAIL gcc version 11.1.1 20210623 (Red Hat 11.1.1-6) (GCC) builtin-sched.c: In function 'create_tasks': /git/perf-5.14.0-rc1/tools/include/linux/kernel.h:43:24: error: comparison of distinct pointer types lacks a cast [-Werror] 43 | (void) (&_max1 == &_max2); \ | ^~ builtin-sched.c:673:34: note: in expansion of macro 'max' 673 | (size_t) max(16 * 1024, PTHREAD_STACK_MIN)); | ^~~ cc1: all warnings being treated as errors $ grep __sysconf /usr/include/*/*.h /usr/include/bits/pthread_stack_min-dynamic.h:extern long int __sysconf (int __name) __THROW; /usr/include/bits/pthread_stack_min-dynamic.h:# define PTHREAD_STACK_MIN __sysconf (__SC_THREAD_STACK_MIN_VALUE) /usr/include/bits/time.h:extern long int __sysconf (int); /usr/include/bits/time.h:# define CLK_TCK ((__clock_t) __sysconf (2)) /* 2 is _SC_CLK_TCK */ $ So cast it to int to cope with that. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14libperf: Fix build error with LIBPFM4=1Heiko Carstens1-1/+1
Fix build error with LIBPFM4=1: CC util/pfm.o util/pfm.c: In function ‘parse_libpfm_events_option’: util/pfm.c:102:30: error: ‘struct evsel’ has no member named ‘leader’ 102 | evsel->leader = grp_leader; | ^~ Committer notes: There is this entry in 'make -C tools/perf build-test' to test the build with libpfm: $ grep libpfm tools/perf/tests/make make_with_libpfm4 := LIBPFM4=1 run += make_with_libpfm4 $ But the test machine lacked libpfm-devel, now its installed and further cases like this shouldn't happen. Committer testing: Before this patch this fails, after applying it: $ make -C tools/perf build-test make: Entering directory '/var/home/acme/git/perf/tools/perf' - tarpkg: ./tests/perf-targz-src-pkg . make_static: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1 -j24 DESTDIR=/tmp/tmp.KzFSfvGRQa <SNIP> make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1 make_with_libpfm4_O: make LIBPFM4=1 make_install_prefix_O: make install prefix=/tmp/krava make_no_auxtrace_O: make NO_AUXTRACE=1 <SNIP> $ rpm -q libpfm-devel libpfm-devel-4.11.0-4.fc34.x86_64 $ FIXME: This shows a need for 'build-test' to bail out when a build option is specified that has no required library devel files installed. Fixes: fba7c86601e2e42d ("libperf: Move 'leader' from tools/perf to perf_evsel::leader") Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210713091907.1555560-1-hca@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14tools headers UAPI: Sync files changed by the memfd_secret new syscallArnaldo Carvalho de Melo1-0/+1
To pick the changes in this cset: 7bb7f2ac24a028b2 ("arch, mm: wire up memfd_secret system call where relevant") That silences these perf build warnings and add support for those new syscalls in tools such as 'perf trace'. For instance, this is now possible: # perf trace -v -e memfd_secret event qualifier tracepoint filter: (common_pid != 13375 && common_pid != 3713) && (id == 447) ^C# That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ grep memfd_secret tools/perf/arch/x86/entry/syscalls/syscall_64.tbl 447 common memfd_secret sys_memfd_secret $ This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h' diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h' diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14perf stat: Merge uncore events by default for hybrid platformJin Yao2-4/+13
On a hybrid platform, by default 'perf stat' aggregates and reports the event counts per PMU. For example, # perf stat -e cycles -a true Performance counter stats for 'system wide': 1,400,445 cpu_core/cycles/ 680,881 cpu_atom/cycles/ 0.001770773 seconds time elapsed But for uncore events that's not a suitable method. Uncore has nothing to do with hybrid. So for uncore events, we aggregate event counts from all PMUs and report the counts without PMUs. Before: # perf stat -e arb/event=0x81,umask=0x1/,arb/event=0x84,umask=0x1/ -a true Performance counter stats for 'system wide': 2,058 uncore_arb_0/event=0x81,umask=0x1/ 2,028 uncore_arb_1/event=0x81,umask=0x1/ 0 uncore_arb_0/event=0x84,umask=0x1/ 0 uncore_arb_1/event=0x84,umask=0x1/ 0.000614498 seconds time elapsed After: # perf stat -e arb/event=0x81,umask=0x1/,arb/event=0x84,umask=0x1/ -a true Performance counter stats for 'system wide': 3,996 arb/event=0x81,umask=0x1/ 0 arb/event=0x84,umask=0x1/ 0.000630046 seconds time elapsed Of course, we also keep the '--no-merge' working for uncore events. # perf stat -e arb/event=0x81,umask=0x1/,arb/event=0x84,umask=0x1/ --no-merge true Performance counter stats for 'system wide': 1,952 uncore_arb_0/event=0x81,umask=0x1/ 1,921 uncore_arb_1/event=0x81,umask=0x1/ 0 uncore_arb_0/event=0x84,umask=0x1/ 0 uncore_arb_1/event=0x84,umask=0x1/ 0.000575536 seconds time elapsed Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210707055652.962-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14perf tests: Fix 'Convert perf time to TSC' on core-only systemJin Yao1-1/+2
If the atom CPUs are offlined, the 'cpu_atom' is not valid. We don't need the test case for 'cpu_atom'. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210708013701.20347-5-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14perf tests: Fix 'Roundtrip evsel->name' on core-only systemJin Yao1-1/+2
If the atom CPUs are offlined, the 'cpu_atom' is not valid. Perf will not create two events for one hw event, so the evsel->idx doesn't need to be divided by 2 before comparing. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210708013701.20347-4-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14perf tests: Fix 'Parse event definition strings' on core-only systemJin Yao1-6/+10
If the atom CPUs are offlined, the 'cpu_atom' is not valid. We don't need the test case for 'cpu_atom'. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210708013701.20347-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14perf pmu: Skip invalid hybrid pmuJin Yao1-1/+8
On hybrid platform, such as Alderlake, if atom CPUs are offlined, the kernel still exports the sysfs path '/sys/devices/cpu_atom/' for 'cpu_atom' pmu but the file '/sys/devices/cpu_atom/cpus' is empty, which indicates this is an invalid pmu. Need to check and skip the invalid hybrid pmu. Before: # perf list ... branch-instructions OR cpu_atom/branch-instructions/ [Kernel PMU event] branch-instructions OR cpu_core/branch-instructions/ [Kernel PMU event] branch-misses OR cpu_atom/branch-misses/ [Kernel PMU event] branch-misses OR cpu_core/branch-misses/ [Kernel PMU event] bus-cycles OR cpu_atom/bus-cycles/ [Kernel PMU event] bus-cycles OR cpu_core/bus-cycles/ [Kernel PMU event] ... The cpu_atom events are still displayed even if atom CPUs are offlined. After: # perf list ... branch-instructions OR cpu_core/branch-instructions/ [Kernel PMU event] branch-misses OR cpu_core/branch-misses/ [Kernel PMU event] bus-cycles OR cpu_core/bus-cycles/ [Kernel PMU event] ... Now only cpu_core events are displayed. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210708013701.20347-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-09perf test: Add free() calls for scandir() returned dirent entriesRiccardo Mancini1-4/+11
ASan reported a memory leak for items of the entlist returned from scandir(). In fact, scandir() returns a malloc'd array of malloc'd dirents. This patch adds the missing (z)frees. Fixes: da963834fe6975a1 ("perf test: Iterate over shell tests in alphabetical order") Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Fabian Hemmer <copy@copy.sh> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Link: http://lore.kernel.org/lkml/20210709163454.672082-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-09perf tools: Fix pattern matching for same substring in different PMU typeJin Yao3-2/+37
Some different PMU types may have the same substring. For example, on Icelake server we have PMU types "uncore_imc" and "uncore_imc_free_running". Both PMU types have the substring "uncore_imc". But the parser wrongly thinks they are the same PMU type. We enable an imc event, perf stat -e uncore_imc/event=0xe3/ -a -- sleep 1 Perf actually expands the event to: uncore_imc_0/event=0xe3/ uncore_imc_1/event=0xe3/ uncore_imc_2/event=0xe3/ uncore_imc_3/event=0xe3/ uncore_imc_4/event=0xe3/ uncore_imc_5/event=0xe3/ uncore_imc_6/event=0xe3/ uncore_imc_7/event=0xe3/ uncore_imc_free_running_0/event=0xe3/ uncore_imc_free_running_1/event=0xe3/ uncore_imc_free_running_3/event=0xe3/ uncore_imc_free_running_4/event=0xe3/ That's because the "uncore_imc_free_running" matches the pattern "uncore_imc*". Now we check that the last characters of PMU name is '_<digit>'. For example, for pattern "uncore_imc*", "uncore_imc_0" is parsed ok, but "uncore_imc_free_running_0" fails. Fixes: b2b9d3a3f0211c5d ("perf pmu: Support wildcards on pmu name in dynamic pmu events") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210701064253.1175-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-09perf record: Add a dummy event on hybrid systems to collect metadata recordsKan Liang1-4/+5
Some symbols may not be resolved if a user only monitors one type of PMU. $ sudo perf record -e cpu_atom/branch-instructions/ ./big_small_workload $ sudo perf report –stdio # Overhead Command Shared Object Symbol # ........ ......... ................. ..................... # 28.02% perf-exec [unknown] [.] 0x0000000000401cf6 11.32% perf-exec [unknown] [.] 0x0000000000401d04 10.90% perf-exec [unknown] [.] 0x0000000000401d11 10.61% perf-exec [unknown] [.] 0x0000000000401cfc To parse symbols the metadata records, e.g., PERF_RECORD_COMM, which are generated by the kernel, are required. To decide whether to generate the metadata records, the kernel relies on the event_filter_match() to filter the unrelated events. On a hybrid system, event_filter_match() further checks the CPU mask of the current enabled PMU. If an event is collected on the CPU which doesn't have an enabled PMU, it's treated as an unrelated event. The "big_small_workload" is created in a big core, but runs on a small core. The metadata records are filtered, because the user only monitors the PMU of the small core. The big core PMU is not enabled. For a hybrid system, a dummy event is required to generate the complete side-band events. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/1625760212-18441-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-09perf stat: Add Topdown metrics L2 events as default eventsKan Liang2-1/+8
The Topdown Microarchitecture Analysis (TMA) Method is a structured analysis methodology to identify critical performance bottlenecks in out-of-order processors. The Topdown metrics L1 event was added as default in 42641d6f4d15e6db ("perf stat: Add Topdown metrics events as default events") From the Sapphire Rapids server and later platforms, the same dedicated "metrics" register is extended to support both L1 and L2 events. Add both L1 and L2 Topdown metrics events as default to enrich the default measuring information if the new measurement register is available. On legacy systems there is no change to avoid extra multiplexing. The topdown_level indicates the max metrics level for the top-down statistics. Set it to 2 to display all L1 and L2 Topdown metrics events. With the patch: $ perf stat sleep 1 Performance counter stats for 'sleep 1': 0.59 msec task-clock # 0.001 CPUs utilized 1 context-switches # 1.687 K/sec 0 cpu-migrations # 0.000 /sec 76 page-faults # 128.198 K/sec 1,405,318 cycles # 2.371 GHz 1,471,136 instructions # 1.05 insn per cycle 310,132 branches # 523.136 M/sec 10,435 branch-misses # 3.36% of all branches 8,431,908 slots # 14.223 G/sec 1,554,116 topdown-retiring # 18.4% retiring 1,289,585 topdown-bad-spec # 15.2% bad speculation 2,810,636 topdown-fe-bound # 33.2% frontend bound 2,810,636 topdown-be-bound # 33.2% backend bound 231,464 topdown-heavy-ops # 2.7% heavy operations # 15.6% light operations 1,223,453 topdown-br-mispredict # 14.5% branch mispredict # 0.8% machine clears 1,884,779 topdown-fetch-lat # 22.3% fetch latency # 10.9% fetch bandwidth 1,454,917 topdown-mem-bound # 17.2% memory bound # 16.0% Core bound 1.001179699 seconds time elapsed 0.000000000 seconds user 0.001238000 seconds sys Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/1625760169-18396-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-09libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()Jiri Olsa3-20/+2
Move the implementation of evlist__set_leader() to a new libperf perf_evlist__set_leader() function with the same functionality make it a libperf exported API. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210706151704.73662-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-09libperf: Move 'nr_groups' from tools/perf to evlist::nr_groupsJiri Olsa10-23/+22
Move evsel::nr_groups to perf_evsel::nr_groups, so we can move the group interface to libperf. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210706151704.73662-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-09libperf: Move 'leader' from tools/perf to perf_evsel::leaderJiri Olsa18-77/+101
Move evsel::leader to perf_evsel::leader, so we can move the group interface to libperf. Also add several evsel helpers to ease up the transition: struct evsel *evsel__leader(struct evsel *evsel); - get leader evsel bool evsel__has_leader(struct evsel *evsel, struct evsel *leader); - true if evsel has leader as leader bool evsel__is_leader(struct evsel *evsel); - true if evsel is itw own leader void evsel__set_leader(struct evsel *evsel, struct evsel *leader); - set leader for evsel Committer notes: Fix this when building with 'make BUILD_BPF_SKEL=1' tools/perf/util/bpf_counter.c - if (evsel->leader->core.nr_members > 1) { + if (evsel->core.leader->nr_members > 1) { Signed-off-by: Jiri Olsa <jolsa@kernel.org> Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210706151704.73662-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-09libperf: Move 'idx' from tools/perf to perf_evsel::idxJiri Olsa18-55/+51
Move evsel::idx to perf_evsel::idx, so we can move the group interface to libperf. Committer notes: Fixup evsel->idx usage in tools/perf/util/bpf_counter_cgroup.c, that appeared in my tree in my local tree. Also fixed up these: $ find tools/perf/ -name "*.[ch]" | xargs grep 'evsel->idx' tools/perf/ui/gtk/annotate.c: evsel->idx + i); tools/perf/ui/gtk/annotate.c: evsel->idx); $ That running 'make -C tools/perf build-test' caught. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210706151704.73662-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-07perf intel-pt: Add a config for max loops without consuming a packetAdrian Hunter4-4/+21
The Intel PT decoder limits the number of unconditional branches (e.g. jmps) decoded without consuming any trace packets. Generally, a loop needs a conditional branch which generates a TNT packet, whereas a "ret" instruction will generate a TIP or TNT packet. So exceeding the limit is assumed to be a never-ending loop, which can happen if there has been a decoding error putting the decoder at the wrong place in the code. Up until now, the limit of 10000 has been enough but some analytic purposes have been reported to exceed that. Increase the limit to 100000, and make it configurable via perf config intel-pt.max-loops. Also amend the "Never-ending loop" message to mention the configuration entry. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210701175132.3977-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-07perf stat: Disable the NMI watchdog message on hybridJin Yao1-3/+6
If we run a single workload that only runs on big core, there is always a ugly message about disabling the NMI watchdog because the atom is not counted. Before: # ./perf stat true Performance counter stats for 'true': 0.43 msec task-clock # 0.396 CPUs utilized 0 context-switches # 0.000 /sec 0 cpu-migrations # 0.000 /sec 45 page-faults # 103.918 K/sec 639,634 cpu_core/cycles/ # 1.477 G/sec <not counted> cpu_atom/cycles/ (0.00%) 643,498 cpu_core/instructions/ # 1.486 G/sec <not counted> cpu_atom/instructions/ (0.00%) 123,715 cpu_core/branches/ # 285.694 M/sec <not counted> cpu_atom/branches/ (0.00%) 4,094 cpu_core/branch-misses/ # 9.454 M/sec <not counted> cpu_atom/branch-misses/ (0.00%) 0.001092407 seconds time elapsed 0.001144000 seconds user 0.000000000 seconds sys Some events weren't counted. Try disabling the NMI watchdog: echo 0 > /proc/sys/kernel/nmi_watchdog perf stat ... echo 1 > /proc/sys/kernel/nmi_watchdog # ./perf stat -e '{cpu_atom/cycles/,msr/tsc/}' true Performance counter stats for 'true': <not counted> cpu_atom/cycles/ (0.00%) <not counted> msr/tsc/ (0.00%) 0.001904106 seconds time elapsed 0.001947000 seconds user 0.000000000 seconds sys Some events weren't counted. Try disabling the NMI watchdog: echo 0 > /proc/sys/kernel/nmi_watchdog perf stat ... echo 1 > /proc/sys/kernel/nmi_watchdog The events in group usually have to be from the same PMU. Try reorganizing the group. Now we disable the NMI watchdog message on hybrid, otherwise there are too many false positives. After: # ./perf stat true Performance counter stats for 'true': 0.79 msec task-clock # 0.419 CPUs utilized 0 context-switches # 0.000 /sec 0 cpu-migrations # 0.000 /sec 48 page-faults # 60.889 K/sec 777,692 cpu_core/cycles/ # 986.519 M/sec <not counted> cpu_atom/cycles/ (0.00%) 669,147 cpu_core/instructions/ # 848.828 M/sec <not counted> cpu_atom/instructions/ (0.00%) 128,635 cpu_core/branches/ # 163.176 M/sec <not counted> cpu_atom/branches/ (0.00%) 4,089 cpu_core/branch-misses/ # 5.187 M/sec <not counted> cpu_atom/branch-misses/ (0.00%) 0.001880649 seconds time elapsed 0.001935000 seconds user 0.000000000 seconds sys # ./perf stat -e '{cpu_atom/cycles/,msr/tsc/}' true Performance counter stats for 'true': <not counted> cpu_atom/cycles/ (0.00%) <not counted> msr/tsc/ (0.00%) 0.000963319 seconds time elapsed 0.000999000 seconds user 0.000000000 seconds sys Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210610034557.29766-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-07perf vendor events power10: Adds 24x7 nest metric events for power10 platformKajol Jain1-0/+424
Patch adds 24x7 nest metric events for POWER10. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Clarke <pc@us.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/lkml/20210628064935.163465-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-07perf script python: Fix buffer size to report iregs in perf scriptKajol Jain1-5/+12
Commit 48a1f565261d2ab1 ("perf script python: Add more PMU fields to event handler dict") added functionality to report fields like weight, iregs, uregs etc via perf report. That commit predefined buffer size to 512 bytes to print those fields. But in PowerPC, since we added extended regs support in: 068aeea3773a6f4c ("perf powerpc: Support exposing Performance Monitor Counter SPRs as part of extended regs") d735599a069f6936 ("powerpc/perf: Add extended regs support for power10 platform") Now iregs can carry more bytes of data and this predefined buffer size can result to data loss in perf script output. This patch resolves this issue by making the buffer size dynamic, based on the number of registers needed to print. It also changes the regs_map() return type from int to void, as it is not being used by the set_regs_in_dict(), its only caller. Fixes: 068aeea3773a6f4c ("perf powerpc: Support exposing Performance Monitor Counter SPRs as part of extended regs") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Paul Clarke <pc@us.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/lkml/20210628062341.155839-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-07perf trace: Fix the perf trace link locationJustin M. Forbes1-1/+1
The install perf_dlfilter.h patch included what seems to be a typo in the Makefile.perf, which changed the location of the trace link from '$(DESTDIR_SQ)$(bindir_SQ)/trace' to '$(DESTDIR_SQ)$(dir_SQ)/trace'. This reverts it back to the correct location. Fixes: 0beb218315e06e88 ("perf build: Install perf_dlfilter.h") Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Justin M. Forbes <jmforbes@linuxtx.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210706185952.116121-1-jforbes@fedoraproject.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-07perf top: Fix overflow in elf_sec__is_text()Riccardo Mancini1-3/+14
ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top. The bug is caused by the fact that secstrs is built from runtime_ss, while shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they point to two different ELF files. This patch renames secstrs to secstrs_run and adds secstrs_sym, so that the correct secstrs is chosen depending on shdr.sh_type. $ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top ================================================================= ==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0 READ of size 1 at 0x61300009add6 thread T6 #0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b) #1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2) #2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9 #3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9 #4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20 #5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9 #6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7 #7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6 #8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13 #9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6 #10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3 #11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9 #12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8 #13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9 #14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7 #15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8 #16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc) allocated by thread T6 here: #0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f) #1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9) Thread T6 created by T0 here: #0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856) #1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6 #2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11 #3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3 #7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16 SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*) Shadow bytes around the buggy address: 0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa 0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc ==363148==ABORTING Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Fabian Hemmer <copy@copy.sh> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Link: http://lore.kernel.org/lkml/20210621222108.196219-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-07perf annotate: Fix 's' on source line when disasm is emptyRiccardo Mancini1-2/+2
If the disasm is empty, 's' should fail. Instead it seemingly works, hiding the empty lines and causing an assertion error on the next time annotate is called (from within perf report). The problem is caused by a buffer overflow, caused by a wrong exit condition in annotate_browser__find_next_asm_line, which checks browser->b.top instead of browser->b.entries. This patch fixes the issue, making annotate_browser__toggle_source fail if the disasm is empty (nothing happens to the user). Fixes: 6de249d66d2e7881 ("perf annotate: Allow 's' on source code lines") Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210705161524.72953-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-07perf probe: Do not show @plt function by defaultMasami Hiramatsu1-1/+1
Fix the perf-probe --functions option do not show the PLT stub symbols (*@plt) by default. ----- $ ./perf probe -x /usr/lib64/libc-2.33.so -F | head a64l abort abs accept accept4 access acct addmntent addseverity adjtime ----- Reported-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Masami Hiramatsu <mhriamat@kernel.org> Acked-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Stefan Liebler <stli@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Link: http://lore.kernel.org/lkml/162532653450.393143.12621329879630677469.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.