path: root/tools/testing/ktest (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-26ktest: Set CLOSE_CONSOLE_SIGNAL in the kvm.confSatoru Takeuchi1-0/+4
As mentioned at commit 5a5d8e48449, we can't terminate 'virsh console' with the default signal(INT). So it's better to set CLOSE_CONSOLE_SIGNAL in the kvm.conf. Link: http://lkml.kernel.org/r/8738jatylb.wl%satoru.takeuchi@gmail.com Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> [ Typo fixed by ] Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-18ktest: Add BISECT_TRIES to bisect testSteven Rostedt (Red Hat)2-2/+36
For those cases that it takes several tries to hit a bug, it would be useful for ktest.pl to try a test multiple times before it considers the test as a pass. To accomplish this, BISECT_TRIES ktest config option has been added. It is default to one, as most of the time a bisect only needs to try a test once. But the user can now up this to make ktest run a given test multiple times. The first failure that is detected will set a bisect bad. It only repeats on success. Note, as with all race bugs, there's no guarantee that if it succeeds, it is really a good bisect. But it helps in case the bug is somewhat reliable. You can set BISECT_TRIES to zero, and all tests will be considered good, unless you also set BISECT_MANUAL. Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-11ktest: Add eval '=~' command to modify variables in config fileSteven Rostedt (Red Hat)1-21/+81
With the added variable ${KERNEL_VERSION}, it is useful to be able to use parts of it for other variables. For example, if you want to create a warnings file for each major kernel version to test sub versions against you can create your warnings file with like this: WARNINGS_FILE = warnings-file-${KERNEL_VERSION} But this may add 3.8.12 or something, and we want all 3.8.* to use the same file, and 3.10.* to use another file, and so on. With the eval command we can, by adding: WARNINGS_FILE =~ s/(-file-\d+\.\d+).*/$1/ Which will chop off the extra characters after the 3.8. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-11ktest: Add special variable ${KERNEL_VERSION}Steven Rostedt (Red Hat)1-8/+19
Add a special variable that can be used in other variables called ${KERNEL_VERSION}. This will embed the current kernel version into the variable. For example: WARNINGS_FILE = ${OUTPUT_DIR}/warnings-${KERNEL_VERSION} If the current version is v3.8 then the WARNINGS_FILE will become ${OUTPUT_DIR}/warnings-v3.8 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-03ktest: Add documentation of CLOSE_CONSOLE_SIGNALSteven Rostedt (Red Hat)1-0/+7
The sample.conf file needs to document all available options. With the new CLOSE_CONSOE_SIGNAL option, it too needs to be document. Cc: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-03ktest: Make the signal to terminate the console configurableSatoru Takeuchi1-1/+4
Currently ktest sends SIGINT to terminate the console. However, there are consoles which do not exit by this signal, for example, in my case, "virsh console <guest OS>". In such case, ktest is blocked in close_console(). It prevents this automate test. This patch adds new option CLOSE_CONSOLE_SIGNAL which mean the signal to terminate the console. Since its default value is "INT", the original behavior isn't changed. Link: http://lkml.kernel.org/r/87zjol8pl5.wl%satoru.takeuchi@gmail.com Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-09-16Drop support for Renesas H8/300 (h8300) architectureGuenter Roeck1-6/+0
H8/300 has been dead for several years, and the kernel for it has not compiled for ages. Drop support for it. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-05-28treewide: Fix typo in printkMasanari Iida1-1/+1
Correct spelling typo in various part of drivers Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-24ktest: Reset grub menu cache with different machinesSteven Rostedt (Red Hat)1-2/+7
Different tests may use a different machine. In such cases, we need to try to get the current grub menu index. If the same grub menu is used for two different machines, it may not be at the same index on the second machine. A search for the index must be performed again. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-08ktest: Allow tests to use different GRUB_MENUsSteven Rostedt (Red Hat)1-2/+7
To save connecting and searching for a given grub menu for each test, ktest.pl will cache the grub number it found. The problem is that different tests might use a different grub menu, but ktest.pl will ignore it. Instead, have ktest.pl check if the grub menu it used to cache the content is the same as when it grabbed the menu. If not, grab it again, otherwise just return the cached value. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-18ktest: Remove indexes from warnings checkSteven Rostedt (Red Hat)1-8/+26
The index of a line where a warning is tested can be returned differently on different versions of gcc (or same version compiled differently). That is, a tab + space can give different results. This causes the warning check to produce a false positive. Removing the index from the check fixes this issue. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05ktest: Ignore warnings during rebootSteven Rostedt (Red Hat)1-0/+8
The reboot just wants to get to the next kernel. But if a warning (Call Trace) appears, the monitor will report an error, and the reboot will think something went wrong and power cycle the box, even though we successfully made it to the next kernel. Ignore warnings during the reboot until we get to the next kernel. It will still timeout if we never get to the next kernel and then a power cycle will happen. That's what we want it to do. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05ktest: Search for linux banner for successful rebootSteven Rostedt (Red Hat)1-1/+6
Sometimes when a test kernel passed fine, but on reboot it crashed, ktest could get stuck and not proceed. This would be frustrating if you let a test run overnight to find out the next morning that it was stuck on the first test. To fix this, I made reboot check for the REBOOT_SUCCESS_LINE. If the line was not detected, then it would power cycle the box. What it didn't cover was if the REBOOT_SUCCESS_LINE wasn't defined or if a 'good' kernel did not display the line. Instead have it search for the Linux banner "Linux version". The reboot just needs to get to the start of the next kernel, it does not need to test if the next kernel makes it to a boot prompt. After we find the next kernel has booted, then we just wait for either the REBOOT_SUCCESS_LINE to appear or the timeout. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31ktest: Add make_warnings_file and process full warningsSteven Rostedt (Red Hat)3-6/+185
Although the patchcheck test checks for warnings in the files that were changed, this check does not catch warnings that were caused by header file changes and the warnings appear in C files not touched by the commit. Add a new option called WARNINGS_FILE. If this option is set, then the file it points to is read before bulid, and the file should contain a list of known warnings. If a warning appears in the build, this file is checked, and if the warning does not exist in this file, then it fails the build showing the new warning. If the WARNINGS_FILE points to a file that does not exist, this will cause any warning in the build to fail. A new test is also added called "make_warnings_file". This test will create do a build and record any warnings it finds into the WARNINGS_FILE. This test is something that can be run before other tests to build a warnings file of "known warnings", ie, warnings that were there before your changes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31ktest: Allow a test option to use its default optionSteven Rostedt (Red Hat)1-6/+10
Options are allowed to use other options, for example: LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log where the option LOG_FILE used the options OUTPUT_DIR and MACHINE. But if a test option were to use a default option, it will not get substituted: OUTPUT_DIR = ${THIS_DIR}/${MACHINE} TEST_START OUTPUT_DIR = ${OUTPUT_DIR}/t1 For the above test, OUTPUT_DIR will stay literally "${OUTPUT_DIR}/t1" and not be converted to "${THIS_DIR}/${MACHINE}/t1". When the test runs, it will pass the ${OUTPUT_DIR} to the shell, which would probaly interpret it as "", and the output directory will end up as "/t1". Change the code where if a test option has its own option name in its defined field, and a default option exists, then substitute the default option in its place. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30ktest: Strip off '\n' when reading which files were modifiedSteven Rostedt (Red Hat)1-0/+4
The patchcheck test looks at what files are modified for each patch it checks and makes sure that those files do not produce any warnings. Unfortunately, when it read the diffstat, the newlines were added on the files and this made compares miss warnings, and commits that should not have passed, ktest let pass. Fix this by using the perl command "chomp" that strips off whitespace at the end of lines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30ktest: Do not require CONSOLE for build or install bisectsSteven Rostedt (Red Hat)1-5/+22
If the user is doing a build or install bisect, there's no reason to have them define CONSOLE, as the console does not need to be read. The console only needs to be read for boot tests. CONSOLE is not required for normal build or install tests, let's not require it for bisect tests with BISECT_TYPE of build or install. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11ktest: Test if target machine is up before installSteven Rostedt1-0/+10
Sometimes a test kernel will crash or hang on reboot (this is even more apparent when testing a config without CGROUPS on a box running systemd). When this happens, on the next iteration of installing a kernel, ktest will fail when it tries to install. Have ktest do a check to see if the target can be connected to via ssh before it tries to install. If it can't connect, then reboot again. This time the reboot will fail because it can't connect and will force a power cycle. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11ktest: Fix breakage from change of oldnoconfig to olddefconfigSteven Rostedt1-4/+8
Commit fb16d891 "kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name", changed ktest's default config update from oldnoconfig to olddefconfig without adding oldnoconfig as a backup. The make oldnoconfig works much better than its backup of: yes '' | make oldconfig But due to this change, and the fact that ktest is used to build lots of older kernels (and for bisects), it forgoes the oldnoconfig completely. Cc: Adam Lee <adam8157@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11ktest: Add native support for syslinux boot loaderSteven Rostedt2-2/+48
I installed Fedora 17 which no longer supports grub v1. I worked with grub2 for a while, but there's so many issues with it and automated rebooting, that I decided to switch to syslinux. Instead of using the REBOOT_SCRIPT and add customized changes to get syslinux booted, I thought it better to make ktest aware of syslinux and add options to simplify the use of syslinux on a target test box. Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11ktest: Sync before rebootSteven Rostedt1-0/+3
Before rebooting the target, run the sync command, as it seems that either Grub2 or systemd gets screwed up if you update to reboot a kernel once and do a reboot without doing a sync. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-13ktest: Add support for grub2Steven Rostedt2-4/+91
As only grub or 'script' is supported for rebooting to a new kernel, and Fedora 17 has dropped support for grub, I decided to add grub2 support as well (I also plan on adding syslinux/extlinux support too). The options GRUB_FILE and GRUB_REBOOT were added to allow the user to specify where to find the grub.cfg and what tool to use to reboot into the next kernel respectively. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-26ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELASteven Rostedt1-2/+4
In order to decide if ktest should bother installing modules on the target box, it checks if the config file has CONFIG_MODULES=y. But it also checks if the '=y' part exists. It only will install modules if the config exists and is set with '=y'. But as the regex that was used tests: /^CONFIG_MODULES(=y)?/ this will also match: CONFIG_MODULES_USE_ELF_RELA as the '=y' part was optional and it did not test the rest of the line. When this happens, ktest will stop checking the rest of the configs but it will also think that no modules are needed to be installed. What it should do is only jump out of the loop if it actually found a CONFIG_MODULES that is set to true. Otherwise, ktest wont install the necessary modules needed for proper booting of the test target. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-27kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an aliasAdam Lee1-8/+7
As 67d34a6a391369269a2e5dba8a5f42cc4cd50231 said, 'oldnoconfig' doesn't set new symbols to 'n', but instead sets it to their default values. So, this patch replaces 'oldnoconfig' with 'olddefconfig', stop making people confused, and keep the old name 'oldnoconfig' as an alias, because people already are dependent on its behavior with the counter-intuitive name. Signed-off-by: Adam Lee <adam8157@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-26ktest: Fix ELSE IF statementsSteven Rostedt1-1/+3
The ELSE IF statements do not work as expected if another ELSE statement follows. This is because the $if_set is not set. If the ELSE IF condition is true, the following ELSE should be ignored. But because the $if_set is not set, the following ELSE will also be executed. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-01tools/testing: fix comment / output typosMasanari Iida2-2/+2
Correct spelling typo in tools/testing Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-30ktest: Allow perl regex expressions in conditional statementsSteven Rostedt1-1/+5
Add '=~' and '!~' to the list of allowed conditionals for DEFAULT and TEST_START section if statements. ie. TEST_START IF TEST =~ .*test$ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-30ktest: Ignore errors it tests if IGNORE_ERRORS is setSteven Rostedt1-1/+10
The option IGNORE_ERRORS is used to allow a test to succeed even if a warning appears from the kernel. Sometimes kernels will produce warnings that are not associated with a test, and the user wants to test something else. The IGNORE_ERRORS works for boot up, but was not preventing test runs to succeed if the kernel produced a warning. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-20ktest: Reset saved min (force) configs for each testSteven Rostedt1-0/+2
The min configs are saved in a perl hash called force_configs, and this hash is used to add configs to the .config file. But it was not being reset between tests and a min config from a previous test would affect the min config of the next test causing undesirable results. Reset the force_config hash at the start of each test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add check for bug or panic during rebootSteven Rostedt1-1/+27
Usually the target is booted into a dependable kernel when a test starts. The test will install the test kernel and reboot the box. But there may be a time that the kernel is running an unreliable kernel and the reboot may crash. Have ktest detect crashes on a reboot and force a power-cycle instead. This can usually happen if a test kernel was installed to run manual tests, but the user forgot to reboot to the known good kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add MAX_MONITOR_WAIT optionSteven Rostedt2-1/+23
If the console is constantly outputting content, this can cause ktest to get stuck waiting on the monitor to settle down. The option MAX_MONITOR_WAIT is the maximum time (in seconds) for ktest to wait for the console to flush. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Fix config bisect with how make oldnoconfig worksSteven Rostedt1-0/+46
With a name like 'oldnoconfig' one may think that the config generated would disable all configs that were not defined (selecting "no" for all options). But this is not the case. It selects the default. If a config has a 'default y', then it is added if not specified. This broke the config bisect, because options not specified by a config will just use the default, where it expected to turn off. This caused an option to be enabled that disabled an option that would break the build. The end result was that we never found the bad config at the end of the test. Instead of using 'make oldnoconfig', ktest now builds the options it expects enabled and disabled. When it turns off an option, it will no longer remove it, but actually set it to: # CONFIG_FOO is not set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add CONFIG_BISECT_CHECK optionSteven Rostedt2-0/+20
The config-bisect can take a bad config and bisect it down to find out what config actually breaks the config. But as all tests will apply a minconfig (defined by a user) to apply before booting, it is possible that the minconfig could actually make the bad config work (minconfigs can disable configs). The end result is that the config bisect test will not find a config that breaks. This can be rather frustrating to the user. The CONFIG_BISECT_CHECK option, when set to 1, will make sure that the bad config (with the minconfig applied) still fails before trying to bisect. And yes, I did get burned by this. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add PRE_INSTALL optionSteven Rostedt2-0/+16
Add the PRE_INSTALL option that will allow a user to specify a shell command to be executed before the install operation executes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add PRE/POST_KTEST and TEST optionsSteven Rostedt2-0/+67
In order to let the user add commands before and after ktest runs, the PRE_KTEST and POST_KTEST options are defined. They hold shell commands that will execute befor ktest runs its first test, as well as when it completed its last test. The PRE_TEST and POST_TEST will be run befor and after (respectively) for a given test. They can either be global (done for all tests) or defined by a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Remove commented exitSteven Rostedt1-1/+0
A debug 'exit' was left in ktest.pl. Remove it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-23ktest: Change singular "paranthesis" to plural "parentheses"Jesper Juhl1-1/+1
Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22ktest: Add README to explain what is in the examples directorySteven Rostedt1-0/+32
Add a README that explains what the different example configs in the ktest example directory are about. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22ktest: Add the snowball.conf example configSteven Rostedt1-0/+53
I used the snowball.conf in a live demo that demonstrated how to use ktest.pl with a snowball ARM board. I've been asked to included that config in the ktest repository. Here it is. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22ktest: Add an example config that does cross compiling of several archsSteven Rostedt1-0/+260
Add the config that I use to test several archs. I downloaded several cross compilers from: http://kernel.org/pub/tools/crosstool/files/bin/x86_64/ and this config is an example to crosscompile several archs to make sure that your changes do not break archs that you are not working on. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22ktest: Add kvm.conf example configSteven Rostedt1-0/+88
Add an example config that explains how to use ktest with a virtual guest as the target. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22ktest: Add useful example configsSteven Rostedt6-0/+517
I've been asked several times to provide more useful example configs for ktest.pl, as the sample.conf is too complex (because it explains all configs). This adds configs broken up by use case, and these configs are based on actual configs that I use on a daily basis. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_configSteven Rostedt2-1/+16
If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the user and ask them if the OUTPUT_MIN_CONFIG should be used as the starting point for make_min_config instead of MIN_CONFIG. This is usually the case, and to allow the user to do so, which is helpful if the user is creating different min configs based on tests, and they know one is a superset of another test, they can set USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting to use the OUTPUT_MIN_CONFIG and it will just use it. If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to use MIN_CONFIG instead. The default is that USE_OUTPUT_MIN_CONFIG is undefined. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has networkSteven Rostedt2-0/+24
Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default is 'boot' which is what make_min_config has done previously: makes a config file that is the minimum needed to boot the target. But when MIN_CONFIG_TYPE is set to 'test', not only must the target boot, but it must also successfully run the TEST. This allows the creation of a config file that is the minimum to boot and also perform ssh to the target, or anything else a developer wants. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-18ktest: Fix kernelrevision with POST_BUILDSteven Rostedt1-0/+11
The PRE_BUILD and POST_BUILD options of ktest are added to allow the user to add temporary patch to the system and remove it on builds. This is sometimes use to take a change from another git branch and add it to a series without the fix so that this series can be tested, when an unrelated bug exists in the series. The problem comes when a tagged commit is being used. For example, if v3.2 is being tested, and we add a patch to it, the kernelrelease for that commit will be 3.2.0+, but without the patch the version will be 3.2.0. This can cause problems when the kernelrelease is determined for creating the /lib/modules directory. The kernel booting has the '+' but the module directory will not, and the modules will be missing for that boot, and may not allow the kernel to succeed. The fix is to put the creation of the kernelrelease in the POST_BUILD logic, before it applies the POST_BUILD operation. The POST_BUILD is where the patch may be removed, removing the '+' from the kernelrelease. The calculation of the kernelrelease will also stay in its current location but will be ignored if it was already calculated previously. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01ktest: Fix reboot on success stopping all rebootsSteven Rostedt1-2/+8
The change to let individual tests decide to reboot the machine on success of the entire test also prevented errors from rebooting when an error was detected. The "no_reboot" variable was only cleared if the test had reboot_on_success set. But the no_reboot variable also prevents the test rebooting when an error was detected even when REBOOT_ON_ERROR was set. Add a new "reboot_success" variable that is used to determine if the test should reboot on success and not touch the no_reboot variable. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIPRuss Dill1-1/+1
When BISECT_REVERSE and BISECT_SKIP are used together with boot or test testing, build failures are treated as boot or test failures and 'git bisect bad' is executed instead of 'git bisect skip'. This is because the $ret value of -1 is treated as a build failure, but the $reverse_bisect logic does not properly handle this. Simple fix, only invert it if it is positive. Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21ktest: Allow a test to override REBOOT_ON_SUCCESSSteven Rostedt1-2/+10
The option REBOOT_ON_SUCCESS is global, and will have the machine reboot the the box if all tests are successful. But a test may not want the machine to reboot, and perhaps have the kernel it loaded be used to install the next kernel. Or the last test may set up a kernel that the user may want to look at. In this case, the user could have the global option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the end, that test can override the global option and keep the kernel it installed for the user to log in with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21ktest: Fix SWITCH_TO_GOOD to also reboot the machineSteven Rostedt1-1/+0
When the option SWITCH_TO_GOOD is set, it will be called when the system needs to reboot to the good server. But currently, this keeps the reboot from happening. The SWITCH_TO_GOOD is just a way to get to a new kernel, it may not mean to not reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21ktest: Add SCP_TO_TARGET_INSTALL optionSteven Rostedt2-7/+33
Currently the option used to scp both the modules to the target as well as the kernel image are the same (SCP_TO_TARGET). But some embedded boards may require them to be different. The modules may need to be put directly on the board, but the kernel image may need to go to a tftpserver. Add the option SCP_TO_TARGET_INSTALL that will allow the user to change the config so that they may have the modules and image got to different machines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>